How to join HD and non HD movie clips?

I have tried several ways to insert this non HD clip into an HD clip. I have also tried converting both into the same type of file.
It always looks like it worked but when I play the completed movie it always freezes up before it reaches the part that was inserted.
Has anyone else had this problem. I am using the latest version of IMovie and OSX 10.9.2

Hi
Nor .mov or Mpeg are Video-Codecs - they are (as far as I know) Containers (sort of folders) as can hold Codecs that works - or not.
Open them in QuickTime-player (can open many more than iMovie/iDVD can use)
then open Inspector - cmd+I
Read
Video format (Codec): nnnnnnnnnnnn
Frames per second: YY.yy
What does it say - (for each and every video clip to be used) ?
Yours Bengt W

Similar Messages

When trying to download yosemite it sais that i do not have enough memory. when i look at my memory use it shows that 111.00gb of space is used by movies but when i go th the movie folder it is empty. how can i remove the non existant movies.

when trying to download yosemite it sais that i do not have enough memory. when i look at my memory use it shows that 111.00gb of space is used by movies but when i go th the movie folder it is empty. how can i remove the non existant movies.

Freeing Up Space on The Hard Drive
1. See Lion/Mountain Lion/Mavericks' Storage Display.
2. You can remove data from your Home folder except for the /Home/Library/ folder.
3. Visit The XLab FAQs and read the FAQ on freeing up space on your hard drive.
4. Also see Freeing space on your Mac OS X startup disk.
5. See Where did my Disk Space go?.
6. See The Storage Display.
You must Empty the Trash in order to recover the space they occupied on the hard drive.
You should consider replacing the drive with a larger one. Check out OWC for drives, tutorials, and toolkits.
Try using OmniDiskSweeper 1.8 or GrandPerspective to search your drive for large files and where they are located.
You will need a minimum of 10-12 GBs of free space to install Yosemite, however, that is a bare minimum and should be at least twice that amount.

HOW CAN I DOWNLOAD AND VIEW THE MOVIES I HAVE MADE WITH MY SONY CAMCORDER HDR-XR550VE?

HOW CAN I DOWNLOAD AND VIEW THE MOVIES I HAVE MADE WITH MY SONY CAMCORDER HDR-XR550VE?

Thanks for being so helpful. I chased up the web-link but was not sure it would work with .cpi, so didn't opt to buy it.
Then I went on to the Sony support page and found this - which works fine, and has very clear instructions.
http://support.sony-europe.com/tutorials/dime/imovietransfer/imovie.aspx?site=od w_en_GB&f=CAM&m=HDR-XR550VE
Once again many thanks for helping me along the path to success with this.
John

How can the symbol and non-English diacritical marking, etc accessed with combinations of letters and functional keys prior to Snow Leopard be achieved in Snow Leopard?

How can the symbol and non-English diacritical marking/punctuation pallet, available in pre-Snow Leopard OSes with various combinations of letter or number keys and functional keys, be accessed in Snow Leopard? Those pre-Snow Leopard versions worked on the fly as one was making text in any pedestrian application and its native font (Mail, Text Edit, for example). One didn't need to dig around in font libraries, change font preferences, etc.

> One didn't need to dig around in font libraries, change font
> preferences, etc.
It hasn't worked like that since the Early Chalcolithic (ie, System 7 or thereabouts).
You've already got plenty of answers. Briefly (and grossly oversimplified),
- Mac OS X conforms to a standard known as Unicode; in its current incarnation, it defines over 100k characters.
- A keypress is translated into a character according to the current keyboard layout.
- The graphic representation of a character (ie, glyph), is provided by the current font.
- If a font lacks a glyph for the requested character, either another font will be automatically chosen (Mac OS X text engine), or some form of feedback (empty box, question mark, etc) will be used.
- To inspect the actual key codes, use a utility such as Key Codes.
- To inspect the current keyboard layout, invoke Keyboard Viewer.
- To inspect the full complement of glyphs of a font, invoke Character Viewer (also accessed with the Special Characters command).
(Remember that both these utilities are resizable and zoomable -- you can enlarge them to a comfortable viewing size, then zoom out to see more of the screen for your original task.)
- For a more detailed look, use a utility such as UnicodeChecker.
- The default keyboard layout depends on your Mac OS X localisation.
(Keep in mind that there's no need to stick with the default layout; choose whichever one makes sense to you, given your language, habits, and proclivities. Mac OS X comes bundled with quite a few, including some obviously designed for the huddled masses of refugees from the Dark Side, who, in their wretched ignorance, have the unmitigated gall of labelling our native ways "really uncomfortable". Oh well, this, too, shall pass.
If none of the supplied keyboard layouts fits your needs -- if, for instance, you write your emails in Etruscan -- go out on the 'net, you'll find quite a few. Or write your own with Ukulele, it's not really all that difficult.)
- Use Keyboard Viewer to familiarise yourself with the current layout and to enter the odd character; but, to be proficient, you should learn your layout to the point that KV is no longer needed.
- Use Character Viewer to enter the odd character not available in the current keyboard layout.
Neither Keyboard Viewer nor Character Viewer are effective tools for more extensive needs, eg, for writing and editing bilingual or multilingual texts. In such a case, you should enable the respective keyboard layouts and switch between them with a keyboard shortcut.
A few interesting layouts bundled with Mac OS X have already been mentioned. Let me add three.
- Dvorak: several layouts based on the Dvorak keyboard. It is claimed that the latter is more productive and lessens RSI risk.
- US Extended: based on QWERTY, it offers a more extensive set of diacritics (eg, caron, breve) via dead keys.
- Unicode Hex Input: also based QWERTY, it allows input by Unicode codepoint (in hexadecimal), so it's the most extensive layout of all; eg, to enter the character "Parenthesized Number Twelve" (U+247F), hold down Option, type "247f", release Option.

How do I download and view AVI Movies?

How do I download and view AVI movies? I tried Peruvian and it didn't work.

Since Perian didn't work, it's probably impossible. You may want to post back with the audio and video codec listed under 'Show Movie Inspector' or 'Show Movie Properties' in the Window menu, however.
(58001)

How to join OE_ORDER_HEADERS_ALL and HZ_PARTY_SITES,HZ_PARTIES in R12

Hi all,
Please Clarify.
How to join OE_ORDER_HEADERS_ALL and HZ_PARTY_SITES,HZ_PARTIES in R12

how can i make a join to get the Customer_Name and Customer_Number from RA_Customer table and oe_order_headers_all and oe_order_lines_all......thanks in advancePlease see these docs for examples on how to join those three tables.
Multiple Language Request For Sales Order Acknowledgment Has Performance Issue [ID 1275133.1]
Shipment History Data Are Not Populated In Dp [ID 889057.1]
Disc0unt Did Not Apply To Sales Order Line With Volume Offer As Modifier [ID 1415593.1]
Thanks,
Hussein

How to join BKPF and BSEG

Hi Experts,
how to join BKPF and BSEG
Thanks
nagini

Hi,
BKPF is Transparent table but BSEG is cluster table. We can't create views by joining cluster tables.
hope it helps...
regards,
Raju

How to join ce_200_transactions_v and ce_statement_lines in Cash Management?

Hi all ,
how to join ce_200_transactions_v and ce_statement_lines in Cash Management?
Please suggest.

Did you check eTRM website? -- http://etrm.oracle.com/
Thanks,
Hussein

How do you save and burn a movie to play on a dvd player to show on your tv

I finished a movie, and saved it as a MP4 file. How do you save and burn a movie to play in a dvd player and show on your tv.

I found an iDVD program through Softonic. Do you know anything about reliability and if it is safe to download this one? If not do you have any suggestions for one I might download.

How to load dynamic text inside a movie clip?

hello all - i have a main stage where on the first frame my
"home" movie clip displays. i did this by dragging/dropping, and
then i put a stop action. all works fine.
inside this home movie clip on the main stage, there are
links to other movie clips. for example, to get to my faq's page -
you click that button, then it takes you to frame 4 on my main
stage, where my faq's movie clip (followed by stop action) has been
dragged/dropped and displays properly.
within the faq's movie clip this process is repeated, with
buttons taking to you various pages (different frames where
different movie clips play - all works fine).
so now i want to add a dynamic text field within my faq's
movie clip. i have read numerous tutorials where i have created the
text file but i have not been able to display it with success
within my faqs movie clip.
here is some code that my dvd tutorial instructs me to place
on main stage as i practice getting this to work:
var myMCL:MovieClipLoader = new MovieClipLoader ();
var myListener:Object = new Object();
myMCL.addListener(myListener);
var myLV:LoadVars = new LoadVars();
myLV.onLoad = function (success:Boolean) {
if (success) {
_level5.loadedInfo.htmlText = myLV.info;
} else {
_level5.loadedInfo.text = "There has been an error loading
the requested information. Please contact the webmaster.";
and here is some code that i place on the faqs button within
my main movie clip that takes me back to main stage and plays faq
movie clip all successfully:
on (release) {
//Movieclip GotoAndPlay Behavior
_root.gotoAndPlay("4");
//End Behavior
and finally, here is some code that i place within my faqs
movie clip in an attempt to display my dynamic text within the faqs
movie clip - so far unsuccessful:
_level0.myLV.load("vars/faqs.txt");
NOTE:
i have published this to view - not working.
i have my faqs text file starting as info=
i have eliminated white space within my text file
i am using flash 8 pro
can anyone offer some sugestions? thanks!

hmmmmm lemme double check as i seem to be a bit lost now.
// this is my actions layer code on frame 4 of main timeline:
stop();
var myLV:LoadVars = new LoadVars();
myLV.onLoad = function (success:Boolean) {
if (success) {
_level5.loadedInfo.htmlText = myLV.info;
} else {
_level5.loadedInfo.text = "There has been an error loading
the requested information. Please contact the webmaster.";
myLV.load("vars/faqs.txt");
1. fyi - at frame 4 on main timeline, one layer beneath the
actions layer where i dragged/dropped my faqs movie clip i gave my
faqs movie clip an instance name of "mainfaqs" - although nowhere
do i refer to this specific mc within my code.
2. where would i replace/insert the following code?
_level0.faq_mc.loadedInfo.text = myLV.info;
3. i didn't know about embedding font but i saw the option
and embedded it - still no results.
4. i'm not sure how to do the following:
_level5.loadedInfo.text ='test'; //although I would still
change the path as above
To see if your getting a return from the load call adn text
file, use a trace statment before the success condition and see
what it returns:
trace(myLV);
sorry to be such a pain - i really have looked around for
answers through previous postings and i googled it and i've been
taking instruction through lynda.com and dvds but i seem to be
stuck here.... as always - thanks for your time

How do you combine two or more movie clips into one movie clip in iMovie '09

how do you combine two or more movie clips into one movie clip in iMovie '09

First create an iMovie project. Then drag the clips (or portions of clips) that you need into the project.
When finished, use the SHARE menu to share the project.

How to stop a slideshow and show another movie clip at the end?

Currently my slideshow is in a loop. At the end of last slideshow, I want to show another movie clip (End_mv) that's on another layer. How do I do that? My current scripts are below:
import fl.transitions.Tween;
import fl.transitions.easing.*;
//change scale on an image
var fadeTween:Tween;
//To slide in on X axis
var slideXTween:Tween;
//To slide in on Y axis
var slideYTween:Tween;
//To fade IN
var alphaTween:Tween;
//To get bigger on its X axis
var scaleXTween:Tween;
//To get bigger on its Y axis
var scaleYTween:Tween;
//var fadeTween:Tween;
//description place holder
var strDescrp:String;
//source place holder
var strSource:String;
//x poistion
var posX:Number;
//y position
var posY:Number;
//degree rotation
var degreeRot:Number;
// delay between slides
//const TIMER_DELAY:int = 5000;
var TIMER_DELAY:int = 5000;
// fade time between slides
const FADE_TIME:int = 3;
// reference to the current slider container
var currentContainer:Sprite;
// index of the current slide
var intCurrentSlide:int = -1;
// total slides
var intSlideCount:int;
// timer for switching slides
var slideTimer:Timer;
// slides holder
var sprContainer1:Sprite;
var sprContainer2:Sprite;
// slides loader
var slideLoader:Loader;
// url to slideshow xml
var strXMLPath:String = "lstHouse.xml";
// slideshow xml loader
var xmlLoader:URLLoader;
// slideshow xml
var xmlSlideshow:XML;
var txtField:TextField = new TextField();
var formatText:TextFormat = new TextFormat();
//start of sound section is for sound
var soundReq:URLRequest = new URLRequest("PaukenBrumfiel_AngelsOnHigh.mp3");
var sound:Sound = new Sound();
sound.load(soundReq);
sound.addEventListener(Event.COMPLETE, onComplete);
//end of sound section
function onComplete(event:Event):void
    sound.play();
function init():void
    // create new urlloader for xml file
    xmlLoader = new URLLoader();
    // add listener for complete event
    xmlLoader.addEventListener(Event.COMPLETE, onXMLLoadComplete);
    // load xml file
    xmlLoader.load(new URLRequest(strXMLPath));
    // create new timer with delay from constant
    slideTimer = new Timer(TIMER_DELAY);
    // add event listener for timer event
    slideTimer.addEventListener(TimerEvent.TIMER, switchSlide);
    // create 2 container sprite which will hold the slides and
    // add them to the masked movieclip
    sprContainer1 = new Sprite();
    sprContainer2 = new Sprite();
    mcSlideHolder.addChild(sprContainer1);
    mcSlideHolder.addChild(sprContainer2);
    // keep a reference of the container which is currently
    // in the front
    currentContainer = sprContainer2;
function onXMLLoadComplete(event:Event):void
    // create new xml with the received data
    xmlSlideshow = new XML(event.target.data);
    // get total slide count
    intSlideCount = xmlSlideshow..image.length();
    // switch the first slide without a delay
    switchSlide(null);
function fadeSlideIn(e:Event):void {
    // add loaded slide from slide loader to the
    // current container
    currentContainer.addChild(slideLoader.content);
    // clear preloader text
    //mcInfo.lbl_loading.text = "";
    // fade the current container in and start the slide timer
    // when the tween is finished
    //Tweener.addTween(currentContainer, {alpha:1, time:FADE_TIME, onComplete:function() { slideTimer.start(); }});
    //strSource = xmlSlideshow.image[intCurrentSlide].@src;
    fadeTween = new Tween(currentContainer, "alpha", Regular.easeInOut, 0, 1, 2, true)
    //scale = new Tween(currentContainer, "alpha", Regular.easeInOut, 0, 1, 2, true)
    slideTimer.start()
    onComplete:function();
function switchSlide(e:Event):void
    // check, if the timer is running (needed for the
    // very first switch of the slide)
    if(slideTimer.running)
        slideTimer.stop();
    // check if we have any slides left and increment
    // current slide index
    if(intCurrentSlide + 1 < intSlideCount)
        intCurrentSlide++;
    // if not, start slideshow from beginning
    else
        intCurrentSlide = 0;
    // check which container is currently in the front and
    // assign currentContainer to the one that's in the back with
    // the old slide
    if(currentContainer == sprContainer2)
        currentContainer = sprContainer1;
    else
        currentContainer = sprContainer2;
    // hide the old slide
    currentContainer.alpha = 0;
    // bring the old slide to the front
    mcSlideHolder.swapChildren(sprContainer2, sprContainer1);
    strDescrp = xmlSlideshow.image[intCurrentSlide].@desc;
    //strSource = xmlSlideshow.image[intCurrentSlide].@src;
    //txtField.border = true;
    //txtField.x = 0;
    //txtField.y = 600;
    txtField.width = 855;
    txtField.height = 200;
    //txtField.background = true;
    //txtField.backgroundColor = 0xEE9A00;
    txtField.alpha = 20;
    txtField.text = strDescrp;
    formatText.align = TextFormatAlign.CENTER;
    //txtField.autoSize = TextFieldAutoSize.LEFT;
    formatText.color = 0x000;
    formatText.size = 30;
    txtField.x = 0;
    txtField.y = 550;
    posX = 0;
    posY = 0;
    degreeRot = 0;
    // create a new loader for the slide
    slideLoader = new Loader();
    // add event listener when slide is loaded
    slideLoader.contentLoaderInfo.addEventListener(Event.COMPLETE, fadeSlideIn);
    // load the next slide
    slideLoader.load(new URLRequest(xmlSlideshow.image[intCurrentSlide].@src));
    addChild(txtField);
    txtField.setTextFormat(formatText)
// init slideshow
init();

I got this error:
ArgumentError: Error #2025: The supplied DisplayObject must be a child of the caller.
    at flash.display::DisplayObjectContainer/swapChildren()
    at University_Advancement_Holiday_Greeting2012_fla::MainTimeline/switchSlide()
    at flash.utils::Timer/_timerDispatch()
    at flash.utils::Timer/tick()
And here's the code:
// import tweener
//import caurina.transitions.Tweener;
import fl.transitions.Tween;
import fl.transitions.easing.*;
import flash.display.MovieClip;
//change scale on an image
var fadeTween:Tween;
//To slide in on X axis
var slideXTween:Tween;
//To slide in on Y axis
var slideYTween:Tween;
//To fade IN
var alphaTween:Tween;
//To get bigger on its X axis
var scaleXTween:Tween;
//To get bigger on its Y axis
var scaleYTween:Tween;
//var fadeTween:Tween;
//description place holder
var strDescrp:String;
//source place holder
var strSource:String;
//x poistion
var posX:Number;
//y position
var posY:Number;
//degree rotation
var degreeRot:Number;
// delay between slides
//const TIMER_DELAY:int = 5000;
var TIMER_DELAY:int = 5000;
// fade time between slides
const FADE_TIME:int = 3;
// reference to the current slider container
var currentContainer:Sprite;
// index of the current slide
var intCurrentSlide:int = -1;
// total slides
var intSlideCount:int;
// timer for switching slides
var slideTimer:Timer;
// slides holder
var sprContainer1:Sprite;
var sprContainer2:Sprite;
// slides loader
var slideLoader:Loader;
// url to slideshow xml
var strXMLPath:String = "lstHouse.xml";
// slideshow xml loader
var xmlLoader:URLLoader;
// slideshow xml
var xmlSlideshow:XML;
var txtField:TextField = new TextField();
var formatText:TextFormat = new TextFormat();
//var myEnding:MovieClip = stage.getChildByName('End_mc') as MovieClip;
//start of sound section is for sound
var soundReq:URLRequest = new URLRequest("PaukenBrumfiel_AngelsOnHigh.mp3");
var sound:Sound = new Sound();
sound.load(soundReq);
sound.addEventListener(Event.COMPLETE, onComplete);
//end of sound section
function onComplete(event:Event):void
    sound.play();
function init():void
    //reference my movie clip "End_mc" oon the stage and turn its visibility off
    MovieClip(getChildByName('End_mc')).visible = false;
    // create new urlloader for xml file
    xmlLoader = new URLLoader();
    // add listener for complete event
    xmlLoader.addEventListener(Event.COMPLETE, onXMLLoadComplete);
    // load xml file
    xmlLoader.load(new URLRequest(strXMLPath));
    // create new timer with delay from constant
    slideTimer = new Timer(TIMER_DELAY);
    // add event listener for timer event
    slideTimer.addEventListener(TimerEvent.TIMER, switchSlide);
    // create 2 container sprite which will hold the slides and
    // add them to the masked movieclip
    sprContainer1 = new Sprite();
    sprContainer2 = new Sprite();
    mcSlideHolder.addChild(sprContainer1);
    mcSlideHolder.addChild(sprContainer2);
    // keep a reference of the container which is currently
    // in the front
    currentContainer = sprContainer2;
//function onXMLLoadComplete(e:Event):void
function onXMLLoadComplete(event:Event):void
    // create new xml with the received data
    xmlSlideshow = new XML(event.target.data);
    // get total slide count
    intSlideCount = xmlSlideshow..image.length();
    // switch the first slide without a delay
    switchSlide(null);
function fadeSlideIn(e:Event):void {
    // add loaded slide from slide loader to the
    // current container
    currentContainer.addChild(slideLoader.content);
    // clear preloader text
    //mcInfo.lbl_loading.text = "";
    // fade the current container in and start the slide timer
    // when the tween is finished
    //Tweener.addTween(currentContainer, {alpha:1, time:FADE_TIME, onComplete:function() { slideTimer.start(); }});
    //strSource = xmlSlideshow.image[intCurrentSlide].@src;
    fadeTween = new Tween(currentContainer, "alpha", Regular.easeInOut, 0, 1, 2, true)
    //scale = new Tween(currentContainer, "alpha", Regular.easeInOut, 0, 1, 2, true)
    slideTimer.start()
    onComplete:function();
function switchSlide(e:Event):void
    // check, if the timer is running (needed for the
    // very first switch of the slide)
    if(slideTimer.running)
        slideTimer.stop();
    // ADDED: Check if using sprContainer2 and at the last slide
    //if ((currentContainer == sprContainer2) && (intCurrentSlide == intSlideCount))
    trace("Current Slide: " + intCurrentSlide);
    trace("SlideCount: " + intSlideCount);
    if ((currentContainer == sprContainer2) && ((intCurrentSlide + 1) == intSlideCount))
        // hide the slideshow (and other related elements, or remove them if desired)
        //mcSlideHolder.visible = false;
        // remove any clips directly inside slideshow (any timers/etc need to be stopped too)
         while (mcSlideHolder.numChildren > 0)
            mcSlideHolder.removeChildAt(0);
        // I do see a var named 'sound' playing so you might want to:
         //sound.stop();
         //sound = null;
        // etc any other slideshow-only elements to hide/remove..
        // play your movie
        MovieClip(getChildByName('End_mc')).visible = true;
        MovieClip(getChildByName('End_mc')).play();
    // check if we have any slides left and increment
    // current slide index
    if(intCurrentSlide + 1 < intSlideCount)
        intCurrentSlide++;
    // if not, start slideshow from beginning
    else
        intCurrentSlide = 0;
    // check which container is currently in the front and
    // assign currentContainer to the one that's in the back with
    // the old slide
    if(currentContainer == sprContainer2)
        currentContainer = sprContainer1;
    else
        currentContainer = sprContainer2;
    // hide the old slide
    currentContainer.alpha = 0;
    // bring the old slide to the front
    mcSlideHolder.swapChildren(sprContainer2, sprContainer1);
    strDescrp = xmlSlideshow.image[intCurrentSlide].@desc;
    //strSource = xmlSlideshow.image[intCurrentSlide].@src;
    //txtField.border = true;
    //txtField.x = 0;
    //txtField.y = 600;
    txtField.width = 855;
    txtField.height = 200;
    //txtField.background = true;
    //txtField.backgroundColor = 0xEE9A00;
    txtField.alpha = 20;
    txtField.text = strDescrp;
    formatText.align = TextFormatAlign.CENTER;
    //txtField.autoSize = TextFieldAutoSize.LEFT;
    formatText.color = 0x000;
    formatText.size = 30;
    txtField.x = 0;
    txtField.y = 550;
    posX = 0;
    posY = 0;
    degreeRot = 0;
    // create a new loader for the slide
    slideLoader = new Loader();
    // add event listener when slide is loaded
    slideLoader.contentLoaderInfo.addEventListener(Event.COMPLETE, fadeSlideIn);
    // add event listener for the progress
    //slideLoader.contentLoaderInfo.addEventListener(ProgressEvent.PROGRESS, showProgress);
    // load the next slide
    slideLoader.load(new URLRequest(xmlSlideshow.image[intCurrentSlide].@src));
    addChild(txtField);
    txtField.setTextFormat(formatText)
// init slideshow
init();

How to join BALDAT and BALHRD???

I am working on the reorganization of the basis tables of SAP and need to analyze the table BALDAT (Application Logs). I would like to know what years the data is from, but therefore I need to do a join.
But how to join these to tables? It can't be done directly...
Can anyone help me? Does anyone know?

Another question: Am I in the right forum for this problem? Or where could I ask such things? Better in the ABAP forums?

How to identify proprietary and non-proprietary parts?

Good Morning All,
We need to distinguish between our proprietary and non-proprietary parts. Does MM in SAP has any field using which we can accomplish this?
Thanks and Regards,
Deepka

Hi
I am not sure but i think you are asking about Asset and non-asset material
so you can distinguish by material type or In Po while creating you have to use account assignment category A
Regards
Kailas Ugale

How to identify Inventory and non inventory items

Dear all,
what are the ways to differentiate inventoried and non inventoried items.
please advise. thanks.
Thanks and regards
Udaya

he means the purchase order item category which can be seen in transaction ME23N.
You never made clear if you want differentiate in SAP or the physical stock in the warehouse.
As already explained by another one, in SAP you can procure one material number either to stock or to be expensed immediatly while receiving.
However, physically you dont see any difference, you have to take organizational measures to not store expensed material together with material procured to stock.
Even further, you should try to receive items which are not procured to be stored, at a different physical receiving place.
In MIGO transaction at item detail in tab WHERE you will see a storage location if the material is to be stored in your warehouse, but you will not see a location if the material is procured directly to a project or cost center. then you see a receipient instead .

How to join HD and non HD movie clips?

Similar Messages

Maybe you are looking for