How to join InfoObject 0mat_plant to 0material in Multiprovider

Hi Folks,
I have a multiprovider which is based on two InfoCubes.
In both InfoCubes I have the InfoObject 0material in the dimension.
Now I need to add the InfoObject 0mat_plant (which is a InfoProvider) to the multiprovider.
0mat_plant is not in the two InfoCubes!
In the first step I added the key part of 0mat_plant to my existing dimension where 0material also is included.
In the second step I asigned the key part 0plant to my existing plant in the dimension.
If run the query it shows me the correct material from 0material because this object is in the InfoCubes.
But for 0mat_plant I see only the plant value and not assigned.
The question is how can I link 0material (which is in the InfoCubes) to 0mat_plant which is not in the InfoCube?
Thanks in advance!
Stephan

Hi,
try to use constant selection in your key figure selections:
SAP Network Blog: The hidden secret of Constant Selection..
/people/prakash.darji/blog/2006/09/19/the-hidden-secret-of-constant-selection
Reat this blog carefully and you will see what i mean.
So you can get rid of this "#" values.
Of Course there are some other ways (InfoSet etc.) but please check this before!
Regards,
Adem
Edited by: Adem Baykal on Oct 3, 2009 5:08 PM

Similar Messages

How to join navegational attributes with infoset

Hi Experts,
How to join navegational attributes with infoset? the infoset based on ODS and both having navigational attributes,
my requirment is to join Vendor account group navigational attributes with infoset,
or else plz
povid stps to crete...
In the infoset how to join Info Object CHAR1 to the CHAR1 in the ODS object which makes all the attributes of CHAR1 accessible in the Infoset..
plz suggest with steps,
regards,
Edited by: Sap-10564461 on Apr 20, 2010 11:34 AM

Hi,
Consider that you have a cube/ODS which has 0MATERIAL. Say you have switched on the nav attribute Material group in the cube.
Now since an infoset acts on a table level, it cannot read nav. attributes directly. Hence you will not be able to find 0MATERIAL__MATGROUP in the infoset.
Now if you want to get able to obtain MATGROUP, you need to add 0MATERIAL to your infoset. One you have added 0MATERIAL, you will be see the attributes of this infoobject as fields.
Map 0MATERIAL from the cube to 0MATERIAL from the info object. Join type is inner join. Now check the MATGROUP field under the infoobject table indicating that this field needs to be fetched by the infoset.
Now when you run a query on the infoset, you will be able to use MATGROUP from 0MATERIAL.
Hope this helps.
Regards.

How to join a cube and a Attribute of it's Char. without navigation

How to join a　cube and a Attribute of it's Characteristic
without navigation Attribute.
example
① Cube X：(data)
・0material： apple
・0company： firmA
・Sales：$100
②ODS(marerial-company master)
(Key)0material： apple
(Key)0company： firmA
・Sales-Employee：Mr.Y
↓
Mr.Y：$100
Now,Cube X has many realdata.
So, we do not hope to repair Cube X itself.

Hello sakurai
1. you should use multiprovider on ODS and cube to get the desired field .
2. Infoset is a flat structure you use for characteristic reporting, in you case you need attribute in reporting so can use it.
3. If u r in BI 7 , add extra field in cube and populate by loopback process....
Award points if help...
Revert back in case of any doubt
Thanks
Tripple k

How to join GRPO with AP invoice thru query ?

hi all,
How to join GRPO with AP invoice in sql query ?
Jeyakanthan

Hi Jeyakanthan
Are you using query in SAP Business One or outside the system? If you select the tables in SAP Business One as OPCH and OPDN then no inner join will appear, as the links sit on the line level. You will need PCH1 and PDN1. The link can be found in both directions, but bear in mind that 1 AP Invoice could be based on more than 1 Goods Receipt PO. For this reason the best approach is to start at the AP Invoice line level and use the BaseType and BaseRef fields to view which lines were pulled from which Goods Receipt PO's.
Kind regards
Peter Juby

How to join max os 10.4.5 to Windows Domain?

Hello everyone,
I just bought new mac laptop for work. I have windows 2003 server running. I want to join my mac to domain so its easy to manage computers in the network. i have tried many articales and disussions but there is no working solution.
if someone could guide me on how to join mac OS 10.4.5 to windows 2003 server, it will be greate.
Thanks

Hello everyone,
I just bought new mac laptop for work. I have windows
2003 server running. I want to join my mac to domain
so its easy to manage computers in the network. i
have tried many articales and disussions but there is
no working solution.
if someone could guide me on how to join mac OS
10.4.5 to windows 2003 server, it will be greate.
Thanks
Thanks for your reply
Again i am using this mac under Windows 2003 server and Exchange 2003, the 2 main components in bussiness. I have gotten email working. If i get mac to join domain i can manage mac through AD (active directory). I know it will not work as windows based workstation but something close.
I am very well aware that i will need windows emulation.
Could you please guide me on what emulation should i use and how it will work?
Thanks

TS1398 how to join wi-fi when it says unable to join?

How to join Wi-Fi when i put the password and it still says unable to join?

Does the iPod connect to other networks?
Do other devices now connect?
Did the iPod connect before?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

How to join local computer to virtual server domain ?

Hi everyone,
I am new to Window Azure cloud computing. I found many articles and tutorials available online but I am kind of lost because I don't what I need to do to achieve my scenario.
Scenario: I want to migrate my servers to cloud and retire all local servers such as DC and file server. At the same time, I wish to control the network traffic to limit the clients access to Internet resources. I am not sure retiring the
all local servers is something right to do and how to do.
What I have done:
1. Site-to-Site VPN connection with Dell Sonicwall TZ205 to VNet. (I followed the route-based VPN in this document -> https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&ved=0CB0QFjAA&url=https%3A%2F%2Fsupport.software.dell.com%2Fdownload%2Fdownloads%3Fid%3D5343958&ei=ykGhVIK6GISWuASU6oHQBw&usg=AFQjCNGGS6fsuK6IHAWyQgZi5fey4xhfKg&bvm=bv.82001339,d.c2E&cad=rja)
2. Created a VM in the VNet. (I can ping the VM from computers connected to TZ205)
3. Installed active directory and configured the domain forest.
What I need to do:
1. How to join the local computers to the virtual server domain controller with S2S and P2S VPN. (Some Internet resources mentioned I need to install Connect agent in order to do this)
Extra questions:
1. Is it possible to request the clients to provide account credentials before the point-to-site VPN to VNet is established ?
2. How do I configure the TZ205 VPN router to send all the Internet traffic to the VNet instead of the ISP gateway? The computers connected to TZ205 firewall router public IP address doesn't change to the VNet gateway IP.
Thanks for your time reading my questions. It will be helpful if you can provide me some useful links or ideas.
Sincerely,
Chee-Kian

Greetings!
I assume there is connectivity between on-prem device and DC on Azure VM.
You can set the Internal IP of the DC as DNS on the on-prem device and trying joining it to the existing domain. Please note to use S2S VPN.
It is not possible to provide user credentials while connecting to vNet via P2S VPN. It's a certificate based authentication (which is so by design).
With regards to your query to send all internet traffic to vNet instead of ISP gateway. Please refer to Forced Tunneling:
http://msdn.microsoft.com/en-us/library/azure/dn835140.aspx
Hope this helps.
Thank you,
Arvind

How to join THREE different tables into internal table using one select statement .

How to join THREE different tables into internal table using one select statement .
Hi experts,
I would like to request your guidance in solving the problem of joining the data from three different database tables into one internal table
Scenario:
Database tables:
SPFLI
SFLIGHT
SBOOK.
Table Fields:
SPFLI - CARRID CONNID COUNTRYFR CITYFRM COUNTRYTO CITYTO
SFLIGHT - CARRID CONNID FLDATE SEATSMAX SEATSOCC SEATSMAX_C
SEATSOCC_C SEATSMAX_F SEATSOCC_F
SBOOK - CARRID CONNID CLASS
MY INTERNAL TABLE IS IT_XX.
Your help much appreciated.
Thanks in advance.
Pawan.

Hi Pawan,
please check below codes. hope it can help you.
TYPES: BEGIN OF ty_xx,
        carrid     TYPE spfli-carrid   ,
        connid     TYPE spfli-connid   ,
        countryfr TYPE spfli-countryfr,
        cityfrom   TYPE spfli-cityfrom ,
        countryto TYPE spfli-countryto,
        cityto     TYPE spfli-cityto   ,
        fldate     TYPE sflight-fldate ,
        seatsmax   TYPE sflight-seatsmax ,
        seatsocc   TYPE sflight-seatsocc ,
        seatsmax_b TYPE sflight-seatsmax_b,
        seatsocc_b TYPE sflight-seatsocc_b,
        seatsmax_f TYPE sflight-seatsmax_f,
        seatsocc_f TYPE sflight-seatsocc_f,
        class      TYPE sbook-class,
      END OF ty_xx,
      t_xx TYPE STANDARD TABLE OF ty_xx.
DATA: it_xx TYPE t_xx.
SELECT spfli~carrid
       spfli~connid
       spfli~countryfr
       spfli~cityfrom
       spfli~countryto
       spfli~cityto
       sflight~fldate
       sflight~seatsmax
       sflight~seatsocc
       sflight~seatsmax_b
       sflight~seatsocc_b
       sflight~seatsmax_f
       sflight~seatsocc_f
       sbook~class
INTO TABLE it_xx
FROM spfli INNER JOIN sflight
ON spfli~carrid = sflight~carrid
AND spfli~connid = sflight~connid
INNER JOIN sbook
ON spfli~carrid = sbook~carrid
AND spfli~connid = sbook~connid.
Thanks,
Yawa

How to join two internal table rows in alternative manner into one internal table?

How to join two internal table rows in alternative manner into one internal table?
two internal tables are suppose itab1 & itab2 & its data
Header 1
Header 2
Header 3
a
b
c
d
e
f
g
h
i
Header 1
Header 2
Header 3
1
2
3
4
5
6
7
8
9
INTO itab3 data
Header 1
Header 2
Header 3
a
b
c
1
2
3
d
e
f
4
5
6
g
h
i
7
8
9

Hi Soubhik,
I have added two additional columns for each internal table.
Table_Count - It represents the Internal Table Number(ITAB1 -> 1, ITAB2 -> 2)
Row_Count - It represents the Row Count Number, increase the row count value 1 by one..
ITAB1:
Header 1
Header 2
Header 3
Table_Count
Row_Count
a
b
c
1
1
d
e
f
1
2
g
h
i
1
3
ITAB2:
Header 1
Header 2
Header 3
Table_Count
Row_Count
1
2
3
2
1
4
5
6
2
2
7
8
9
2
3
Create the Final Internal table as same as the ITAB1/ITAB2 structure.
"Data Declarations
DATA: IT_FINAL LIKE TABLE OF ITAB1.          "Final Internal Table
FIELD-SYMBOLS: <FS_TAB1> TYPE TY_TAB1,     "TAB1
                               <FS_TAB2> TYPE TY_TAB2.     "TAB2
"Assign the values for the additional two column for ITAB1
LOOP AT ITAB1 ASSIGNING <FS_TAB1>.
     <FS_TAB1>-TABLE_COUNT = 1.             "Table value same for all row
     <FS_TAB1>-ROW_COUNT = SY-TABIX. "Index value
ENDLOOP.
"Assign the values for the additional two column for ITAB2
LOOP AT ITAB2 ASSIGNING <FS_TAB2>.
     <FS_TAB2>-TABLE_COUNT = 2.                  "Table value same for all row
     <FS_TAB2>-ROW_COUNT = SY-TABIX.      "Index value
ENDLOOP.
"Copy the First Internal Table 'ITAB1' to Final Table
IT_FINAL[] = ITAB1[].
"Copy the Second Internal Table 'ITAB2' to Final Table
APPEND IT
LOOP AT ITAB2 INTO WA_TAB2.
APPEND WA_TAB2 TO IT_FINAL.
ENDLOOP.
"Sort the Internal Table based on TABLE_COUNT & ROW_COUNT
SORT IT_FINAL BY ROW_COUNT TABLE_COUNT.
After sorting, check the output for IT_FINAL Table, you can find the required output as shown above.
Regards
Rajkumar Narasimman

Error when charging hierarchy for infoObject hieracky for 0MATERIAL

Error when charging hierarchy for infoObject hieracky for 0MATERIAL from infosource 0MATERIAL_LKLS_HIER.
I have an issue when performing a charge of the material hierarchy for the 0MATERIAL InfoObject. The problem is that maybe there are some referential problem. I show you 2 images about that.
[http://bp1.blogger.com/_RnNmoD1OiLE/SE1AyQThUgI/AAAAAAAAAmU/PPp7Uwn22PI/s1600-h/ErrorCarga1.JPG]
[http://bp0.blogger.com/_RnNmoD1OiLE/SE1A6bGswnI/AAAAAAAAAmc/Gtvotn1nilI/s1600-h/ErrorCarga2.JPG]
Could please anyone give me a clue about what's my problem? All regs i'm trying to upload to my BW system give the same error. The datasource i'm using is 0MATERIAL_LKLS_HIER. As you can see, it has registers on it.
[http://bp2.blogger.com/_RnNmoD1OiLE/SE1BBvyBAOI/AAAAAAAAAmk/i2aXHvt8E7o/s1600-h/ErrorCarga3.JPG]
Any Idea? Thank-you!
Artur.
Edited by: Artur Rodriguez Coma on Jun 9, 2008 4:59 PM
Edited by: Artur Rodriguez Coma on Jun 9, 2008 5:00 PM

For this you can enter the screen of infoobject change and select the hierarchy tab at the bottom theres a button External Characteristic in Hierarchy ....there you can set other infoobjects that can be part of the hierarchy of your infoobject...
This is the procedure but you only can add infoobjects that attributes of the principal infoobject ....
I hope this helps
Regards

How to join Photoshop Photography Program offer ?

Hi,
I have tried to join the Photoshop Photography Program Offer ($9.99) without any luck.
Does it not available to my country Indonesia ??
Everytime I hit the sign in button it always bring me to the download page.
Can you give the explanation on how to join the program ?
Thanks.
Regards,
Iwan

Hi IwanS,
Please refer to the below mentioned links to purchase the Photoshop Program Offer and availability:
http://blogs.adobe.com/creativecloud/introducing-the-photoshop-photography-program/
http://www.adobe.com/content/dam/Adobe/en/products/creativecloud/cc/pdfs/cc-availability-m atrix.pdf
Regards
Gurleen

How to join 1 datablock with 2 same datablocks??

Dear Guys,,
My Q. is how to create 2 relations between one data block (block1) with other 2 same data blocks (block2,block3)
(2 same data blocks : reference to same physical tables) ??
any thoughts?

thx sara for quick reply :)
I know how to join between datablocks,, the problem occurs when i want to join 1 details data block with two master data blocks that refer to the same table !!
one relation breaks the other one !!
thx

How to join OE_ORDER_HEADERS_ALL and HZ_PARTY_SITES,HZ_PARTIES in R12

Hi all,
Please Clarify.
How to join OE_ORDER_HEADERS_ALL and HZ_PARTY_SITES,HZ_PARTIES in R12

how can i make a join to get the Customer_Name and Customer_Number from RA_Customer table and oe_order_headers_all and oe_order_lines_all......thanks in advancePlease see these docs for examples on how to join those three tables.
Multiple Language Request For Sales Order Acknowledgment Has Performance Issue [ID 1275133.1]
Shipment History Data Are Not Populated In Dp [ID 889057.1]
Disc0unt Did Not Apply To Sales Order Line With Volume Offer As Modifier [ID 1415593.1]
Thanks,
Hussein

How to Join 2 tables if datetime diff is within range?

Hi, problem figuring out how to join tables if the datediff ? is within range.
There are 3 tables a main table then 2 sub tables, these are measurements with a date/time value. Im trying to take the datetime entries from the 2 sub tables and match them, then add them to the main table
subtable1 has SampleID, datetime,
subtable2 has TesterID, datetime
maintable has SampleID, datetime, TesterID, datetime
so the maintable would always have the sampleID value and datetime regardless. but it would only JOIN the testerID and its datetime, only IF these 2 datetime values were close, and the datediff interval was set to 1 second.
its a function call that fills the main tables matching columns but only if the testerIDs datetime is close to the sampleIDs time????
thanks

Please post DDL, so that people do not have to guess what the keys, constraints, Declarative Referential Integrity, data types, etc. in your schema are. Learn how to follow ISO-11179 data element naming conventions and formatting rules. Temporal data should
use ISO-8601 formats. Code should be in Standard SQL as much as possible and not local dialect.
This is minimal polite behavior on SQL forums. Thanks for making us do your typing and DDL for you :(
>> There are 3 tables; a main table then 2 sub tables, <<
Really? Main table? Sub-tables? There are no such terms in SQL. Trust me on that; I helped with the Standards :) We have referenced referencing tables in the DRI model of SQL.
>> these are measurements with a date/time value. <<
++Both of them, the measurementID and otherID have a millisecond timestamp, the goal is to associate these 2 measurements, they are coming from different systems.
Do you really need the full timestamp down to nanoseconds and not just a DATE? Oh, we also have no sample data :( So we have to guess at precision, constraints, keys, etc.
See why we need DDL? Is this relationship 1:1, 1:M OR N:1? My guess is that a tester can do many samples, but a sample has only one tester. And what were those two timestamps? Not redundant copies from the referenced tables!! That would non-normalized.
>> so the Sample_Tester_Relationship would always have the sample_nbr value and <something>_timestamp regardless. But it would only JOIN the tester_id and its DATETIME, only IF these 2 DATETIME values were close, and the DATEDIFF interval was set
to 1 second. <<
No, you do not do a JOIN inside a base table. That is VIEW.
>> It is a function [sic: procedure, Functions return scalar values] call that fills the main tables matching columns but only if the tester_id DATETIME is close to the sample_id time? <<
No sample data, no sample code and no business rules about ties. Here is my final guess at normalizing this problem:
CREATE TABLE Samples
(sample_nbr CHAR(12) NOT NULL PRIMARY KEY,
CREATE TABLE Testers
(tester_id CHAR(10) NOT NULL PRIMARY KEY,
CREATE TABLE Sample_Tester_Relationship --- needs a real name!
(sample_nbr CHAR(12) NOT NULL PRIMARY KEY
REFERENCES Samples
ON UPDATE CASCADE
ON DELETE CASCADE,
tester_id CHAR(10) NOT NULL
REFERENCES Testers
ON UPDATE CASCADE
ON DELETE CASCADE,
PRIMARY KEY (sample_nbr, tester_id),
tester_timestamp DATETIME2(1) DEFAULT CURRENT_TIMESTAMP NOT NULL,
sample_timestamp DATETIME2(1) DEFAULT CURRENT_TIMESTAMP NOT NULL,
CHECK (ABS (DATEDIFF (SECOND, tester_timestamp, sample_timestamp) <= 1) );
Most of the work in SQL is in DDL, not DML.
I will try this out and advise.
--CELKO-- Books in Celko Series for Morgan-Kaufmann Publishing: Analytics and OLAP in SQL / Data and Databases: Concepts in Practice Data / Measurements and Standards in SQL SQL for Smarties / SQL Programming Style / SQL Puzzles and Answers / Thinking in
Sets / Trees and Hierarchies in SQL
Dear Celko
thank you for this constructive feedback, clearly you're an expert and I am going to be better for following this advice. In the 1970s I was told to avoid going into software because Japan had invented a way for computers to write their own code, so
programmers would be out of a job and the field would be a dead-end. I didnt formally begin training in sw until the 90s. SQL is one of those last frontiers i never trained in. but now Im trying to learn and find anything i can read to absorb
it.
I posted in laymans words because i thought thats how you experts would prefer it described, clearly not. I will now take the time to read each reference to the standards...

How to join four tables in Update query??

Please how to join four tables in a single query to update one table row??

You can use this syntax to update. Here updation of 1 column to a constant value (50) in multiple rows in Table A based on an associated 'SOURCE' value in table B
Table A joins to Table B based on the TableA.definition_id = TableB.Att_Def_id
like..
update TableA
set value =50
where
TableA.definition_id = TableB.Att_Def_id
and TABLEB.Source = 'NEWPRODUCT'

How to join InfoObject 0mat_plant to 0material in Multiprovider

Similar Messages

Maybe you are looking for