How to join internet on iMac G5 10.4

I am trying to set up an iMac G5 10.4 to my wireless internet however, it is not capturing a wireless service.  Can anyone help?

Hi ankur17, and a warm welcome to the forums!
I was hoping somebody could answer that here, but I guess not.
Xcode 3.x automatically adds a UUID load command to the executable file inside your kernel extension. However, the kernel linker in Mac OS X 10.4.x on PowerPC-based systems doesn't know how to handle this UUID load command, so the linker rejects the load request.
You can work around this by adding -Xlinker -no_uuid to the Other Linker Flags build setting for the PowerPC side only of your kext using the following steps.
http://developer.apple.com/library/mac/#qa/qa1628/_index.html

Similar Messages

  • How do i use my iMac and the macs wired internet connection to share the internet with my iPod and iPhone

    How do i use my iMac and the macs wired internet connection to share the internet with my iPod and iPhone. For 6months I had set up a network that shared the internet through bluetooth to my iPod 5th gen but i messed it up when i tried to add my iPhone 5s and i can't remember how to do it.

    The following has instructions: OS X Mavericks: Share your Internet connection

  • Join computer in Domain and how to get Internet access in Joined domain computer

    Dear System Admins,
    Actually I am new to this forum and I need help. Let me explain you my scenario. Ours is a small company and I have configured Cisco router with dedicated Public IP. So the private IP default gateway is 192.168.50.254 and DNS is 218.56.43.22 "DNS is
    given by ISP". Now what I did is I have configured IP address to server 192.168.50.1/24. Default Gateway IPv4 address 192.168.50.254 DNS 218.56.43.22 on Windows domain server computer. Internet is up on Windows Server. Also I have setup Active directory
    successfully. Now I want Windows 7 computer to Join the domain and also it should be able to access to Internet. Let me know how to configure Windows 7 network properties and how to join domain. Please explain me in simple way step by step process. Thank you.

    Dear Arnav,
    I have configured DNS as  218.56.43.22 in windows server computer which has given by our ISP and
    internet is available in  server. For users who wants top join domain. I have configured IP details are as follows. 
    1. Windows 2008 Server IP details
    192.168.50.1
    255.255.255.0
    192.168.50.254
    DNS: 218.56.43.22 <--- Given by ISP with Dedicated Public IP
    Now comes the Windows 7 computer which has to be join in domain for that how should I have to configure Network properties of Windows 7 computer? let me know. Windows 7 IP details are as fallows:
    IPV4 address 192.168.50.2
    Subnet Mask 255.255.255.0
    Default GW   192.168.50.254
    What about DNS? What should I configure in DNS box network properties  for Windows 7 user. Shall I enter Windows Server IP details 192.168.50.1 or "DNS 218.56.43.22 <----which is given by ISP" . Let me know further procedure in order
    to "Windows 7 user join the domain as well as user should be able to access the Internet. At present I have only installed active directory in  widnows 2008 server. Whats Next? please feel free to ask me. Thank you.

  • How do i add my iMac to a windows 7 homegroup

    How do I add my iMac to a Windows 7 homegroup?   The iMac is currently connected to the wireless network but, does not display on the win7 pc as a networked device.   The iMac does have full internet access through the networks wireless router.   I am unable to see shared folders on the iMac.
    Thanks for any assistance, Ron

    You need to turn on the File Sharing. For instructions please visit http://support.apple.com/kb/ht1549

  • HT1338 how can i upgrade my iMAC OS X 10.4.8 version to 10.7 ? Not so computer literate

    How can i updgrade my iMAC OS X 10.4.8 version to 10.7 ?? I'm not so computer literate but my computer is considered old and it is in desperate need of the latest upgrade. Also, how much is the cost for upgrade?  Many thanks to you Apple folks...

    You don't require Leopard.
    Upgrade Paths to Snow Leopard, Lion, and/or Mountain Lion
    You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
    Upgrading to Snow Leopard
    You must purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
    After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
         Snow Leopard General Requirements
           1. Mac computer with an Intel processor
           2. 1GB of memory
           3. 5GB of available disk space
           4. DVD drive for installation
           5. Some features require a compatible Internet service provider;
               fees may apply.
           6. Some features require Apple’s iCloud services; fees and
               terms apply.
    Upgrading to Lion
    If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
    You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax.  It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
         Lion System Requirements
           1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
               or Xeon processor
           2. 2GB of memory
           3. OS X v10.6.6 or later (v10.6.8 recommended)
           4. 7GB of available space
           5. Some features require an Apple ID; terms apply.
    Upgrading to Mountain Lion
    To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
         OS X Mountain Lion - System Requirements
           Macs that can be upgraded to OS X Mountain Lion
             1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
             2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
             3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
             4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
             5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
             6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
             7. Xserve (Early 2009) - Model Identifier 3,1 or later
    To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
         Are my applications compatible?
             See App Compatibility Table - RoaringApps.
         For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion.

  • How shall I use my IMac and MacBookPro, with synchronized files

    Hi, how shall I use my IMac and MacBookPro, with synchronized files? I used to work at home and office with those to machines and finally always have different version of my documents. Is there any dispositive that I should use, where all my files are moving with me? os there is something to synchronized the computers using WiFi or bluetooth?

    The following has instructions: OS X Mavericks: Share your Internet connection

  • How to join local computer to virtual server domain ?

    Hi everyone,
    I am new to Window Azure cloud computing. I found many articles and tutorials available online but I am kind of lost because I don't what I need to do to achieve my scenario.
    Scenario: I want to migrate my servers to cloud and retire all local servers such as DC and file server. At the same time, I wish to control the network traffic to limit the clients access to Internet resources. I am not sure retiring the
    all local servers is something right to do and how to do.
    What I have done:
    1. Site-to-Site VPN connection with Dell Sonicwall TZ205 to VNet. (I followed the route-based VPN in this document -> https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&ved=0CB0QFjAA&url=https%3A%2F%2Fsupport.software.dell.com%2Fdownload%2Fdownloads%3Fid%3D5343958&ei=ykGhVIK6GISWuASU6oHQBw&usg=AFQjCNGGS6fsuK6IHAWyQgZi5fey4xhfKg&bvm=bv.82001339,d.c2E&cad=rja)
    2. Created a VM in the VNet. (I can ping the VM from computers connected to TZ205)
    3. Installed active directory and configured the domain forest.
    What I need to do:
    1. How to join the local computers to the virtual server domain controller with S2S and P2S VPN. (Some Internet resources mentioned I need to install Connect agent in order to do this)
    Extra questions:
    1. Is it possible to request the clients to provide account credentials before the point-to-site VPN to VNet is established ?
    2. How do I configure the TZ205 VPN router to send all the Internet traffic to the VNet instead of the ISP gateway? The computers connected to TZ205 firewall router public IP address doesn't change to the VNet gateway IP.
    Thanks for your time reading my questions. It will be helpful if you can provide me some useful links or ideas.
    Sincerely,
    Chee-Kian

    Greetings!
    I assume there is connectivity between on-prem device and DC on Azure VM.
    You can set the Internal IP of the DC as DNS on the on-prem device and trying joining it to the existing domain. Please note to use S2S VPN.
    It is not possible to provide user credentials while connecting to vNet via P2S VPN. It's a certificate based authentication (which is so by design).
    With regards to your query to send all internet traffic to vNet instead of ISP gateway. Please refer to Forced Tunneling:
    http://msdn.microsoft.com/en-us/library/azure/dn835140.aspx
    Hope this helps.
    Thank you,
    Arvind

  • How to use internet sharing and airtunes?

    Question? how to use internet sharing and airtunes?
    OK I have following working separate situations.
    1. I can share my internet connection : is a router to ethernet cable into mac. Then over airport built in to my iMac ....... to other wireless computers, iphone etc...works fine.
    2. the I have a air port express that is only used for air tunes. I guess i had create a separate network for that. can select that in iTunes. Works.
    problem is can not use both at the same time!
    OK so Now I would like to combine the two; share the ethernet over airport on mac and send music to air port express....
    the main reason for this is cause I now have an iPhone and want to use the internet and the remote app to control iTunes from all over the house.
    I have not the first idea where to start.
    Any hints or tips will be greatly appreciated.

    The airport express is a router. And, only one router can be used to obtain an IP address. So in your airport express configuration set it so it does not obtain an IP address.

  • How to join client to windows server 2012r2 remotely

    Hi.. please.. 
    My Company Just got a new branch far from our recent location.. i am surpose to connect new computers as users from the new location to the domain controller in the head office.. i need to add this client so as to be able to use the Software used in the
    headoffice ...
    i will appreciate a quick response.. please help

    Hi,
    Based on your description, I understand that you want to join some remote client computers to a domain. Would
    you please let me know how setup the connection between the remote client computers and the domain controller?
    If connected in LAN, you can change
    Workgroup to Domain in “Member of” option in System Properties. For more details, please refer to following article and check if can help you.
    How to Join Your Computer to a Domain
    If connected via internet, you may need to establish a VPN connection with the domain from client computer, then
    join the client computer to domain.
    Please refer to following thread and check if can help you.
    Joining
    remote computer to a domain
    If anything I misunderstand or any update, please don’t hesitate to let us know.
    Hope this helps.
    Best regards,
    Justin Gu
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • How connect to internet from domain created in Hyper-V

    How connect to internet from domain created in Hyper-V
    Host =  Win8 Pro
    Connection to internet done using WI-FI
    Internet seeting
    Home router with secury connection -> cable internet
    Network name set on router = "Mtl2014"
    Host setting
    TCP/IPv4 Seeting for WI-FI ,connected to "Mtl2014"
    Obtain address automaticly
    Obtain DNS server address automaticly
    I can connect and browse internet from host
    In Hyper-V
     1.created 2 private virtual switches SW1 and SW2
     2.installed 2 VM HA1 and DC with Win2012 server eval edition
     3.assigned stations HA1 and DC  to virtual switch SW1
    on Host
    WI-FI network connection
     Sharing->Allow other network to connect.. ->Home network connection vEnthernet (SW1)
    in Hyper-V
     choose Activate windows on  HA1 and DC
     open browser on HA1 and DC ,
     At this point I am able to see and browse and search in google from HA1 and DC
    In Hyper-V
     assined virtual switch SW2 to DC and HA1
     created Domain controler on DC and domain Alex1.com
     TCP/IPv4 Seeting on DC
     IP = 192.165.1.8
     subnet = 255.255.255.0
     default getaway = empty
     Prefered DNS server = 192.165.1.8
     TCP/IPv4 Seeting on HA1
     IP = 192.165.1.11
     subnet = 255.255.255.0
     default getaway = 192.165.1.8
     Prefered DNS server = 192.165.1.8
     added HA1 to domain Alex1.com
    Question
     What seeting on SW2, DC, HA1 and  Wi-FI should I change in order to have access to internet from  Alex1\DC and Alex1\HA1?
    I was planning to use internet to download/install pacthes/updates for windows and sql servers located on Alex1\
    I plan to build 6 more Win 2012 server eval and join then to Alex1\
    Thank you
    Alex

    I see.
    1. 192.168.0.0 addresses are not routable across the public Internet. Even if the whole world knows you're using that space, the information is useless. But if you feel better hiding it, OK.
    2. Internal doesn't allow communications with a physical network either. Only the external type does.
    3/4. Your problem is not really with Hyper-V. It's with IP.
    Your machines are all able to communicate with each other because they're on the same switch and the same subnet. No gateway is required. If you have a computer with an IP of 192.168.1.8 and its subnet mask is 255.255.255.0, then it will be able to communicate
    with any computer on the same switch with an IP of 192.168.1.anything. It's when they need to talk to computers off of that subnet (anything that doesn't fit the 255.255.255 mask) that they have a problem. For that, you need a gateway somewhere. You can't
    use "DC" for the gateway because it's not performing routing services.
    You have two choices.
    One is to use an external switch so that your guests are directly connected into your physical network. That will take over your WiFi adapter, so you'll probably want to set the share option so your Win8.1 box continues to function. Then just use a common
    IP subnet with everything else on your home network.
    The second is to set up a software router. If you are using an internal virtual switch, then this has to be in the Win8 environment. I might be mistaken, but I think that
    Internet Connection Sharing would even work for this. If you are using an internal virtual switch, then your Win8 system should see two (or more) adapters. One of them is the physical adapter (we'll call it wNetAdapter) and one would be the virtual adapter
    (we'll call it vNetAdapter) it uses on the virtual switch. Once you set up ICS, you would have all of your VMs use the IP address that you assigned to vNetAdapter as their gateway.
    Eric Siron Altaro Hyper-V Blog
    I am an independent blog contributor, not an Altaro employee. I am solely responsible for the content of my posts.
    "Every relationship you have is in worse shape than you think."

  • How to get internet on a blackberry storm 9350 unlocked?

    i have a blackberry storm 9350 n i want to ask how to get internet on a blackberry storm 9350 unlocked?

    n your gonna need to post somemore detail n say like what carrier you intend to get your internet from?
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • How to share internet from mac to windows

    Any one helps me how to share internet from mac to windows? I have created an internet sharing on macbook, a Mac can connect to internet, but windows pc can't connect with this sharing. I don't know why?

    I am not a Windows guru. However, in XP there is a Wireless Network icon at the lower right side. Click on that, select the network you want to join, insert the password and that's it. Any issues speak to a Windows guru.

  • Where to find the top line on a page on the Internet at IMac? I lost it when was trying to set my ITV on my computer. Can't go to any pages, because there is no line on top of the page. Thank you.

    Hello, where to find the top line on a page on the Internet at IMac? I was trying to made some settings to my computer and now I lost the line on top of my computer , when I open a page. Thank you.

    I'm not sure which line you are refering to as the top line.
    What web page? 
    What web browsr?
    What do you expect to see on the missing line?
    How about a picture?
    How to show us a screen image.  Avoid personal identification.
    command + shift + 3   Will take entire screen.  You hear a click.
    command + shift + 4 Lets you decide what to take.  Mouse pointer changes. Move mouse to upper left corner of desire image.  Hold down left mouse key where to start image.  Drag mouse to lower left of where you want to stop image.  Release mouse.
    You will get a picture n.png file on the desktop.
    one the forum input panel you will see the camera icon.
    click on camera icon.
    another window will appear.
    Make sure you have selected the from your computer tab.
    click on Browse button
    An open file panel appears.  Select the file.
    After selection a file, I have this screen showing.
    You will have to click on Insert Image.  You may have to scroll down to see Insert Image button.

  • Any talk about the DNS changer trojan and how it could effect the iMac

    any talk about the DNS changer trojan and how it could effect the iMac and what are the solutions

    http://www.reedcorner.net/will-your-internet-service-cut-off-on-july-9/
    And recommendations in:  https://discussions.apple.com/message/18851415

  • How can I use my IMac 10.6.8 as a router?

    How can I use my IMac 10.6.8 as a router?

    Open the Sharing pane of System Preferences and turn on Internet Sharing.
    (102621)

Maybe you are looking for