How to join points?

I'm trying to draw a letter with the Pen tool, and I can't join the points in order to complete the shape.

Use the Pen Tool to add a point between the two points on the left side and then again on the right side. Then, using the Direct Selection Tool, delete those two points in order to open the paths. Then select the two upper points and join the points (on a Mac, hit Command J). Then select the lower two and join the points.
I hope this helps.

Similar Messages

TS1398 how to join wi-fi when it says unable to join?

How to join Wi-Fi when i put the password and it still says unable to join?

Does the iPod connect to other networks?
Do other devices now connect?
Did the iPod connect before?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

How to join local computer to virtual server domain ?

Hi everyone,
I am new to Window Azure cloud computing. I found many articles and tutorials available online but I am kind of lost because I don't what I need to do to achieve my scenario.
Scenario: I want to migrate my servers to cloud and retire all local servers such as DC and file server. At the same time, I wish to control the network traffic to limit the clients access to Internet resources. I am not sure retiring the
all local servers is something right to do and how to do.
What I have done:
1. Site-to-Site VPN connection with Dell Sonicwall TZ205 to VNet. (I followed the route-based VPN in this document -> https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&ved=0CB0QFjAA&url=https%3A%2F%2Fsupport.software.dell.com%2Fdownload%2Fdownloads%3Fid%3D5343958&ei=ykGhVIK6GISWuASU6oHQBw&usg=AFQjCNGGS6fsuK6IHAWyQgZi5fey4xhfKg&bvm=bv.82001339,d.c2E&cad=rja)
2. Created a VM in the VNet. (I can ping the VM from computers connected to TZ205)
3. Installed active directory and configured the domain forest.
What I need to do:
1. How to join the local computers to the virtual server domain controller with S2S and P2S VPN. (Some Internet resources mentioned I need to install Connect agent in order to do this)
Extra questions:
1. Is it possible to request the clients to provide account credentials before the point-to-site VPN to VNet is established ?
2. How do I configure the TZ205 VPN router to send all the Internet traffic to the VNet instead of the ISP gateway? The computers connected to TZ205 firewall router public IP address doesn't change to the VNet gateway IP.
Thanks for your time reading my questions. It will be helpful if you can provide me some useful links or ideas.
Sincerely,
Chee-Kian

Greetings!
I assume there is connectivity between on-prem device and DC on Azure VM.
You can set the Internal IP of the DC as DNS on the on-prem device and trying joining it to the existing domain. Please note to use S2S VPN.
It is not possible to provide user credentials while connecting to vNet via P2S VPN. It's a certificate based authentication (which is so by design).
With regards to your query to send all internet traffic to vNet instead of ISP gateway. Please refer to Forced Tunneling:
http://msdn.microsoft.com/en-us/library/azure/dn835140.aspx
Hope this helps.
Thank you,
Arvind

How to Join VBRK, VBRP and BSEG

Dear Guys
I have Billing No from VBRP/VBRK and want to join these tables with BSEG to pick Accounting Doc No.
How to Join these tables.
Thanks

Hi,
What you can do is to use FM AC_DOCUMENT_RECORD. Please check my example below:
MOVE: 'VBRK'          TO lv_awtyp,
              wa_vbrk-vbeln TO lv_awref,
              '2007'      TO lv_aworg.
        CALL FUNCTION 'AC_DOCUMENT_RECORD'
          EXPORTING
            i_awtyp            = lv_awtyp
            i_awref            = lv_awref
            i_aworg            = lv_aworg
*           I_AWSYS            = ' '
*           I_AWTYP_INCL       = ' '
*           I_AWTYP_EXCL       = ' '
*           I_BUKRS            = ' '
*           I_VALUTYP          = '0'
            x_dialog           = ''
          TABLES
            t_documents        = lt_documents
          EXCEPTIONS
            no_reference       = 1
            no_document        = 2
            OTHERS             = 3
        IF sy-subrc <> 0.
          MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                  WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
        ENDIF.
Hope it helps...
P.S. Please award points if it helps...

How to join BPX Community

Hi All,
Could you please tell me how to join BPX Community.
Thanks,
Chinmay Ghosh

Be sure to go to your [Update Profile|http://www.sdn.sap.com/irj/scn/updateprofile] link and check the explicit check box for BPX community (as well as choosing newsletters which will keep you explicitly informed).
Of course further information can be found in the BPX wiki as Rakesh has so correctly pointed out.
Being an active member means finding ways of participating which you can also find a description of here in "[How to Contribute|ABAP Frequently Asked Questions]" and in [Getting Started with BPX|http://www.sdn.sap.com/irj/bpx/gettingstarted]

How to join a cube and a Attribute of it's Char. without navigation

How to join a　cube and a Attribute of it's Characteristic
without navigation Attribute.
example
① Cube X：(data)
・0material： apple
・0company： firmA
・Sales：$100
②ODS(marerial-company master)
(Key)0material： apple
(Key)0company： firmA
・Sales-Employee：Mr.Y
↓
Mr.Y：$100
Now,Cube X has many realdata.
So, we do not hope to repair Cube X itself.

Hello sakurai
1. you should use multiprovider on ODS and cube to get the desired field .
2. Infoset is a flat structure you use for characteristic reporting, in you case you need attribute in reporting so can use it.
3. If u r in BI 7 , add extra field in cube and populate by loopback process....
Award points if help...
Revert back in case of any doubt
Thanks
Tripple k

How to join two open endpoints?

How to join two open endpoints?
I keep getting this error message even though the endpoints do not have this: "To join, you must select two open endpoints. If they are not the same path, they cannot be on text paths nor inside graphs, and if both of them are grouped, they must be in the same group."
I've ungrouped everything.
I've tried using the pen tool to manually join.
I've moved the endpoint, then tried joining them.
I've tried command+J.
Same message everytime.
And if I use the Pathfinder, I'll get unwanted results (i.e. a new path going right though the art)
What's going on!?

blueribb,
While uploading an AI file is unsorted, you may consider at least one option:
One is that you have at least one hidden extra Anchor Point, either on one of the paths or as stray or belonging to a third path.
You may find out by:
1) Using the Direct Selection Tool to click, not drag over, both end Anchor Point and then Cmd+J, and/or
2) Using the Direct Selection Tool to click, not drag over, each end Anchor Point by itself and then move it a bit.

How to join GRPO with AP invoice thru query ?

hi all,
How to join GRPO with AP invoice in sql query ?
Jeyakanthan

Hi Jeyakanthan
Are you using query in SAP Business One or outside the system? If you select the tables in SAP Business One as OPCH and OPDN then no inner join will appear, as the links sit on the line level. You will need PCH1 and PDN1. The link can be found in both directions, but bear in mind that 1 AP Invoice could be based on more than 1 Goods Receipt PO. For this reason the best approach is to start at the AP Invoice line level and use the BaseType and BaseRef fields to view which lines were pulled from which Goods Receipt PO's.
Kind regards
Peter Juby

I have copied videos onto an external hard drive. to free memory on my macbook. When I try to delete these I am warned that I will not be able to use this video in existing projects How do I point iMovie to events in my external hard drive so I can pl

I have copied videos onto an external hard drive. to free memory on my macbook. When I try to delete these I am woarned that I will not be able to use this video in existing projects
How do I point iMovie to events in my external hard drive so I can play projects which use them?
MacBook, iMovie 9.0.4

Hi
You can do this - by not doing it the way You describe as it will not work.
a. the external hard disk - MUST BE - Mac OS extended (hfs) formatted -
UNIX/DOS/FAT32/Mac OS Exchange - will work for most things - BUT NOT FOR VIDEO (iMovie, iDVD or FinalCut doesn't matter)
b. Do not alter or move any folder named
• iMovie Event's - or -
• iMovie Project's
on DeskTop/Finder - at all
All moving's of Events and Projects must be done within the iMovie Application - then connections will not break.
(move them back and see if iMovie remembers them - then do move as described above)
Yours Bengt W

How do i point this at a file in my User folder?

How can i point this at a file in my users folder?
property csvAlias : alias ((path to desktop as text) & "SourceFiles:ean2sku.csv") --path to your csv-File as alias

Standard Additions has a path to command that will return most common locations, such as path to home folder. Note that an alias will need to exist when it is declared.

How can I point my iPhones to a specific address book for syncing?

I only want contacts on my iPhones that have phone numbers and not email addresses.
After creating a iPhone address book, how do I point iTunes to that book instead of the regular Contacts book?
Have been able to do that in the past, but cannot do so running OSX 10.8 or 10.8.2.

You'll have to use Wi-Fi to sync, Bluetooth is not supported:
You can use iPhone with the Apple Wireless Keyboard and other Bluetooth devices, such as Bluetooth headsets, car kits, and stereo headphones. Third-party Bluetooth headphones may support volume and playback controls. See the documentation that came with your Bluetooth device. For supported Bluetooth profiles, go to support.apple.com/kb/HT3647
From the manual: iphone_user_guide 5 page 109
Use iCloud to keep Contacts up to date on your iOS devices and computers
Go to Settings > iCloud, then turn on Contacts. See “iCloud” on page 17.
Message was edited by: Ingo2711

My Mother in law messed up my Adobe reader some how to the point that it is no longer in my computer. I have tried to download it from the internet but it is not working. What am I missing? what else do I need to do? I am not even able to watch youtube...

My Mother in law messed up my Adobe reader some how to the point that it is no longer in my computer. I have tried to download it from the internet but it is not working. What am I missing? what else do I need to do? I am not even able to watch youtube...

Soccerdm,
a direct download of Adobe Reader X 10.1.4 (which seems to be the most recent standalone version that runs on Mac OS X 10.5.8) is here.

How to join max os 10.4.5 to Windows Domain?

Hello everyone,
I just bought new mac laptop for work. I have windows 2003 server running. I want to join my mac to domain so its easy to manage computers in the network. i have tried many articales and disussions but there is no working solution.
if someone could guide me on how to join mac OS 10.4.5 to windows 2003 server, it will be greate.
Thanks

Hello everyone,
I just bought new mac laptop for work. I have windows
2003 server running. I want to join my mac to domain
so its easy to manage computers in the network. i
have tried many articales and disussions but there is
no working solution.
if someone could guide me on how to join mac OS
10.4.5 to windows 2003 server, it will be greate.
Thanks
Thanks for your reply
Again i am using this mac under Windows 2003 server and Exchange 2003, the 2 main components in bussiness. I have gotten email working. If i get mac to join domain i can manage mac through AD (active directory). I know it will not work as windows based workstation but something close.
I am very well aware that i will need windows emulation.
Could you please guide me on what emulation should i use and how it will work?
Thanks

How do i point my iPhoto to view my hard drive pictures

How do I point my iphoto to my external drive to view my pictures instead of reading my internal hard drive

iPhoto does not "view" Photos - it is a SQL database program and only works with photos that have been previously imported to its database
You switch databases by depressing the option key and using the select library option
LN

How to join THREE different tables into internal table using one select statement .

How to join THREE different tables into internal table using one select statement .
Hi experts,
I would like to request your guidance in solving the problem of joining the data from three different database tables into one internal table
Scenario:
Database tables:
SPFLI
SFLIGHT
SBOOK.
Table Fields:
SPFLI - CARRID CONNID COUNTRYFR CITYFRM COUNTRYTO CITYTO
SFLIGHT - CARRID CONNID FLDATE SEATSMAX SEATSOCC SEATSMAX_C
SEATSOCC_C SEATSMAX_F SEATSOCC_F
SBOOK - CARRID CONNID CLASS
MY INTERNAL TABLE IS IT_XX.
Your help much appreciated.
Thanks in advance.
Pawan.

Hi Pawan,
please check below codes. hope it can help you.
TYPES: BEGIN OF ty_xx,
        carrid     TYPE spfli-carrid   ,
        connid     TYPE spfli-connid   ,
        countryfr TYPE spfli-countryfr,
        cityfrom   TYPE spfli-cityfrom ,
        countryto TYPE spfli-countryto,
        cityto     TYPE spfli-cityto   ,
        fldate     TYPE sflight-fldate ,
        seatsmax   TYPE sflight-seatsmax ,
        seatsocc   TYPE sflight-seatsocc ,
        seatsmax_b TYPE sflight-seatsmax_b,
        seatsocc_b TYPE sflight-seatsocc_b,
        seatsmax_f TYPE sflight-seatsmax_f,
        seatsocc_f TYPE sflight-seatsocc_f,
        class      TYPE sbook-class,
      END OF ty_xx,
      t_xx TYPE STANDARD TABLE OF ty_xx.
DATA: it_xx TYPE t_xx.
SELECT spfli~carrid
       spfli~connid
       spfli~countryfr
       spfli~cityfrom
       spfli~countryto
       spfli~cityto
       sflight~fldate
       sflight~seatsmax
       sflight~seatsocc
       sflight~seatsmax_b
       sflight~seatsocc_b
       sflight~seatsmax_f
       sflight~seatsocc_f
       sbook~class
INTO TABLE it_xx
FROM spfli INNER JOIN sflight
ON spfli~carrid = sflight~carrid
AND spfli~connid = sflight~connid
INNER JOIN sbook
ON spfli~carrid = sbook~carrid
AND spfli~connid = sbook~connid.
Thanks,
Yawa

How to join points?

Similar Messages

Maybe you are looking for