How to join projects

Due to rendering problems, I was advised by Adobe support to split a project in several ones.
I followed the advice, rendered all sub-projects and, now, I need to join all of them in one to record in DVD but found no instructions on how to do it.
I use Premiere Elements 9 in a Sony Vaio computer model VGN-FW360AJ, Windows 7 Home Premium.
Please, advise.
Thanks for your information.

I am unaware of a change with PrE 10, above the "standard" 4095 x 4096 (pixel x pixel) size, i.e. ~ 16.7 MegaPixels.
However, many, overly-large Sill Images will bring most computers to its knees, as the processing overhead of those unused pixels take a lot of processing power. Even my workstation (getting a bit behnd the performance curve now), struggles with 5 - 4096 x 4096 Still Images. When I need to work with overly-large Still Images, I just use After Effects, as it handles large Still Images in a different way, than either PrE, or PrPro does.
There are very, very few reasons to use Still Images, much above the pixel x pixel Frame Size of the Project. Users are better off Scaling Still Images in an image-editing program, such as Photoshop. This ARTICLE goes into more detail. Note: there have been some changes in both the quality of internal Scaling, plus the allowable pixel x pixel size, in PrPro CS 5/5.5, over previous versions of that program, and all versions of PrE, BUT most of those changes revolve around the use of PrPro's MPE (Mercury Playback Engine) w/ a CUDA-capable nVidia video card. Even then, there is still the resources issue, and most computers begin choking, when one has many overly-large stills - that has not changed.
When properly Scaled, prior to Import, things go very well, and I have one Project with 3000+ Stills, Scaled to 720 x 480, plus 100's of other Assets, and it edits smoothly, even on my older laptop.
Hunt

Similar Messages

How to join SAP Design Studio - Design Council

Hello Everyone,
Does anyone know how to join Design Studio - Design Council.
I am working on a internal project and would love to provide feedback to product team at SAP.
Thanks,
Rajan

I am not aware of a council like this for Design Studio
There is SAP Lumira's Momentum Grows – Join the BI Design Council, and Co-Innovate with us! for Lumira
ASUG has a Design Studio Influence Council. If you are an ASUG member, you can contact ASUG about it at influence at asug dot com.
You can also provide feedback on Idea Place - ideas.sap.com
Tammy

How to join GRPO with AP invoice thru query ?

hi all,
How to join GRPO with AP invoice in sql query ?
Jeyakanthan

Hi Jeyakanthan
Are you using query in SAP Business One or outside the system? If you select the tables in SAP Business One as OPCH and OPDN then no inner join will appear, as the links sit on the line level. You will need PCH1 and PDN1. The link can be found in both directions, but bear in mind that 1 AP Invoice could be based on more than 1 Goods Receipt PO. For this reason the best approach is to start at the AP Invoice line level and use the BaseType and BaseRef fields to view which lines were pulled from which Goods Receipt PO's.
Kind regards
Peter Juby

How to clean project from comman line ?

How to clean project from comman line ?
I would like to invoke the same functionality as in Flex
Builder Project -> clean... -> clean all projects...
but from command line is it possible ?

You can:
1) Perform a project clean up (p.153 of the user manual) - it removes any unused recordings, samples and other files
2) Consolidate project (p. 154 of manual) - this copies all the used audio material into the project folder and also deletes any empty folders within project folder, making it easier to navigate
3) Save project as a copy - this creates another project folder, but without all the backups and other additional files

Using a Macbook 2008 with Lion 10.7.5, how can I project photos/keynote on smart tv screen? Macbook will not upgrade beyond Lion.

Using a Macbook 2008 with Lion, 10.7.5, how can I project photos/keynote presentation on my smart tv? It is connected to tv with mini-dvi/hdmi cable, but I don't know how to display the images. Thanks!

Did you switch the TV's input to the HDMI port you are using with the computer? Did you open Displays preferences to see if a second screen is displayed and then check the box to mirror to the TV screen? Did you search Google for any help links on how to do what you are trying to do?

How to join max os 10.4.5 to Windows Domain?

Hello everyone,
I just bought new mac laptop for work. I have windows 2003 server running. I want to join my mac to domain so its easy to manage computers in the network. i have tried many articales and disussions but there is no working solution.
if someone could guide me on how to join mac OS 10.4.5 to windows 2003 server, it will be greate.
Thanks

Hello everyone,
I just bought new mac laptop for work. I have windows
2003 server running. I want to join my mac to domain
so its easy to manage computers in the network. i
have tried many articales and disussions but there is
no working solution.
if someone could guide me on how to join mac OS
10.4.5 to windows 2003 server, it will be greate.
Thanks
Thanks for your reply
Again i am using this mac under Windows 2003 server and Exchange 2003, the 2 main components in bussiness. I have gotten email working. If i get mac to join domain i can manage mac through AD (active directory). I know it will not work as windows based workstation but something close.
I am very well aware that i will need windows emulation.
Could you please guide me on what emulation should i use and how it will work?
Thanks

How to assign project specific task with the newly created projects ?

Hi All,
I need help. I need to assign project specific tasks (which i will be taking from staging table) other than the default task which are assigned during project creation. How do I proceed with this within same package. I am attaching the code of my package below...
CREATE OR REPLACE PACKAGE body xxpa_proj_conv_pkg as
PROCEDURE xxpa_create_project_proc(O_ERRBUF OUT VARCHAR2,O_RETCODE OUT VARCHAR2)
is
variables need to derive global parameters
v_responsibility_id NUMBER; --- PA Supervisor responsibility id
v_user_id NUMBER;
deriving global parameters-
-- Variables needed for API standard parameters
v_api_version_number NUMBER := 1.0;
v_commit VARCHAR2(1) := 'F';
v_return_status VARCHAR2(1);
v_init_msg_list VARCHAR2(1) := 'F';
v_msg_count NUMBER;
v_msg_index_out NUMBER;
v_msg_data VARCHAR2(2000);
v_data VARCHAR2(2000);
v_workflow_started VARCHAR2(1) := 'Y';
v_pm_product_code VARCHAR2(10);
---variables for catching errors---
v_error_flag number:=0;
-- Predefined Composite data types
v_project_in PA_PROJECT_PUB.PROJECT_IN_REC_TYPE;
v_project_out PA_PROJECT_PUB.PROJECT_OUT_REC_TYPE;
v_key_members PA_PROJECT_PUB.PROJECT_ROLE_TBL_TYPE;
v_class_categories PA_PROJECT_PUB.CLASS_CATEGORY_TBL_TYPE;
v_tasks_in_rec PA_PROJECT_PUB.TASK_IN_REC_TYPE;
v_tasks_in PA_PROJECT_PUB.TASK_IN_TBL_TYPE;
v_tasks_out_rec PA_PROJECT_PUB.TASK_OUT_REC_TYPE;
v_tasks_out PA_PROJECT_PUB.TASK_OUT_TBL_TYPE;
v_CREATED_FROM_PROJECT_ID varchar2(20);
v_CARRYING_OUT_ORGANIZATION_ID varchar2(20);
v_person_id NUMBER;
v_project_role_type VARCHAR2(20);
API_ERROR EXCEPTION;
v_a NUMBER;
cursor for project in data
CURSOR cur_project_in_data IS SELECT * FROM XXPA_PROJECT_IN_STG;
cursor for task data
CURSOR cur_task_in_data IS SELECT * FROM XXPA_TASK_IN_STG;
------------------------Cursors used for validations----------------------------------
cursor for product code used for validation
cursor cprc is select distinct PROJECT_RELATIONSHIP_CODE from PA_PROJECT_CUSTOMERS;
cursor for distribution rule-
cursor cdr is select DISTRIBUTION_RULE from PA_DISTRIBUTION_RULES;
cursor for project status code
cursor cpsc is SELECT PROJECT_STATUS_CODE, PROJECT_STATUS_NAME FROM PA_PROJECT_STATUSES WHERE STATUS_TYPE = 'PROJECT';
cursor for template/created from project id
cursor ccpid is select project_id from pa_projects where template_flag='Y';
BEGIN
select user_id, responsibility_id into v_user_id, v_responsibility_id
from PA_USER_RESP_V
where user_name like 'amit_kumar%'
and responsibility_name like'PA SupervisorS';
-- --Fnd_global.apps_initialize(user_id,resp_id, resp_appl_id);
-- Fnd_global.apps_initialize(v_user_id,v_responsibility_id,275);
-- -------calling global parameters---
pa_interface_utils_pub.set_global_info
p_api_version_number =>v_api_version_number,
p_responsibility_id =>v_responsibility_id,
p_user_id =>v_user_id,
p_msg_count =>v_msg_count,
p_msg_data =>v_msg_data,
p_return_status =>v_return_status
dbms_output.put_line ('Set Global status ->' || v_return_status);
----Cursor for PRODUCT RELATED DATA-----------
FOR REC IN cur_project_in_data LOOP
-----PASSING VALUES TO THE COMPOSITE DATA TYPE(PROJECT_IN_REC_TYPE)-------
----retrieving product code-----
select lookup_code into v_pm_product_code
from pa_lookups
where lookup_type = 'PM_PRODUCT_CODE'
and meaning = 'Oracle Project Manufacturing';
-----retrieving and validating created from project id----
BEGIN
select project_id
into v_CREATED_FROM_PROJECT_ID
from pa_projects_all
where name=rec.created_from_project_name;
EXCEPTION
when others then
O_Retcode := '1';
O_Errbuf :='Incorrent CREATED_FROM_PROJECT_NAME';
Fnd_File.Put_Line (Fnd_File.LOG, O_Errbuf);
UPDATE XXPA.XXPA_PROJECT_IN_STG
SET ERROR_FLAG ='1' ,last_updation_date='sysdate' where created_from_project_name = rec.CREATED_FROM_PROJECT_NAME;
END;
-----retrieving & validating carrying out organization id-----
BEGIN
select distinct(CARRYING_OUT_ORGANIZATION_ID)
into v_CARRYING_OUT_ORGANIZATION_ID
from pa_projects_prm_v
where CARRYING_OUT_ORGANIZATION_NAME=rec.carrying_out_organization_name;
EXCEPTION
when others then
O_Retcode := '1';
O_Errbuf :='Incorrent Carrying Out Organization name';
Fnd_File.Put_Line (Fnd_File.LOG, O_Errbuf);
UPDATE XXPA.XXPA_PROJECT_IN_STG
SET ERROR_FLAG ='1' ,last_updation_date='sysdate' where carrying_out_organization_name = rec.carrying_out_organization_name;
END ;
v_project_in.pm_project_reference := rec.segment1;
v_project_in.project_name := rec.PROJECT_NAME;
v_project_in.created_from_project_id := v_CREATED_FROM_PROJECT_ID;
v_project_in.carrying_out_organization_id := v_CARRYING_OUT_ORGANIZATION_ID;
v_project_in.project_status_code := rec.PROJECT_STATUS_CODE;
v_project_in.description := rec.PROJECT_DESCRIPTION;
v_project_in.start_date := rec.PROJECT_START_DATE;
v_project_in.completion_date := rec.PROJECT_COMPLETION_DATE;
v_project_in.distribution_rule := rec.DISTRIBUTION_RULE;
v_project_in.project_relationship_code := rec.PROJECT_RELATIONSHIP_CODE;
-------------------------Validation of incoming project data--------------------------------
v_error_flag := 1;
project relationship code validation
BEGIN
for prc in cprc
loop
if (rec.PROJECT_RELATIONSHIP_CODE=prc.PROJECT_RELATIONSHIP_CODE) or (rec.PROJECT_RELATIONSHIP_CODE is null)--can be overridden from template
then
v_error_flag :=0;
else null;
end if;
end loop;
END;
project distribution rule validation
BEGIN
for dr in cdr
loop
if (rec.DISTRIBUTION_RULE=dr.DISTRIBUTION_RULE) or (rec.DISTRIBUTION_RULE is null) null since the value can be taken from template too
then
v_error_flag :=0;
else null;
end if;
end loop;
END;
project status code validation
BEGIN
for sc in cpsc
loop
if (rec.PROJECT_STATUS_CODE=sc.PROJECT_STATUS_CODE) or (rec.PROJECT_STATUS_CODE is null) null since the value can be taken from template too
then
v_error_flag :=0;
else null;
end if;
end loop;
END;
dbms_output.put_line ('Error at PROJECT_STATUS_CODE>' ||v_error_flag);
validation logic for project start date
BEGIN
if TRUNC(rec.PROJECT_START_DATE) >= TRUNC(rec.PROJECT_COMPLETION_DATE)
THEN
v_error_flag := 1;
O_Retcode := '1';
O_Errbuf :='Project start date cannnot be greater than completion date';
Fnd_File.Put_Line (Fnd_File.LOG, O_Errbuf);
END IF;
END;
validation logic for project completion date
BEGIN
if (TRUNC(rec.PROJECT_COMPLETION_DATE)<=TRUNC(rec.PROJECT_START_DATE))
then
if ( rec.PROJECT_STATUS_CODE='CLOSED' and rec.PROJECT_COMPLETION_DATE>sysdate)
THEN
v_error_flag := 1;
O_Retcode := '1';
O_Errbuf :='completion date cannot be greater than sysdate for closed projects';
Fnd_File.Put_Line (Fnd_File.LOG, O_Errbuf);
END IF;
v_error_flag := 1;
O_Retcode := '1';
O_Errbuf :='Project closed date cannot be less than start date';
end if;
END;
--------Update staging table for the error records--------
BEGIN
if v_error_flag =1
then
O_Retcode := '1';
O_Errbuf :='Incorrect project relationship code';
Fnd_File.Put_Line (Fnd_File.LOG, O_Errbuf);
UPDATE XXPA.XXPA_PROJECT_IN_STG
SET ERROR_FLAG ='1' ,last_updation_date='sysdate' where PROJECT_RELATIONSHIP_CODE = rec.PROJECT_RELATIONSHIP_CODE;
end if;
END;
-----------------------End of validation of incoming project data----------------------------------
---------------Project Task DATA-----------------
v_a:=0;
FOR tsk IN cur_task_in_data LOOP
v_tasks_in_rec.pm_task_reference :=tsk.task_reference ;
v_tasks_in_rec.task_name :=tsk.task_name;
v_tasks_in_rec.pm_parent_task_reference :=tsk.parent_task_reference ;
v_tasks_in_rec.task_start_date :=tsk.task_start_date ;
v_tasks_in_rec.task_completion_date :=tsk.task_completion_date ;
v_tasks_in(v_a) := v_tasks_in_rec;
v_a:=v_a+1;
end loop;
---------------end of task details------------------
--INIT_CREATE_PROJECT
pa_project_pub.init_project;
---------------------CREATE_PROJECT--------------------------
pa_project_pub.create_project(
p_api_version_number=> v_api_version_number,
p_commit => v_commit,
p_init_msg_list => v_init_msg_list,
p_msg_count => v_msg_count,
p_msg_data => v_msg_data,
p_return_status => v_return_status,
p_workflow_started => v_workflow_started,
p_pm_product_code => v_pm_product_code,
p_project_in => v_project_in,
p_project_out => v_project_out,
p_key_members => v_key_members,
p_class_categories => v_class_categories,
p_tasks_in => v_tasks_in,
p_tasks_out => v_tasks_out);
if v_return_status = 'S'
then
UPDATE XXPA.XXPA_PROJECT_IN_STG
SET INTERFACE_STATUS ='Success' where segment1 = v_project_out.pa_project_number; ---P->pending & S-> Success
dbms_output.put_line('New Project Id: ' || v_project_out.pa_project_id);
dbms_output.put_line('New Project Number: ' || v_project_out.pa_project_number);
else
UPDATE XXPA.XXPA_PROJECT_IN_STG
SET INTERFACE_STATUS ='Pending' where segment1 = v_project_out.pa_project_number;
raise API_ERROR;
end if;
END LOOP;
Commit;
------Handling Exception--------
EXCEPTION
WHEN api_error THEN
dbms_output.put_line('An error occured during project creation');
IF (v_msg_count > 0 ) THEN
FOR i IN 1..v_msg_count LOOP
apps.PA_INTERFACE_UTILS_PUB.get_messages(
p_msg_count => v_msg_count,
p_encoded => 'F',
p_msg_index => i,
p_msg_data => v_msg_data,
p_data => v_data,
p_msg_index_out => v_msg_index_out);
dbms_output.put_line('Error message v_data ->'||v_data);
dbms_output.put_line('Error message v_msg_data ->'||v_msg_data);
dbms_output.put_line('Error message v_msg_index_out ->'||v_msg_index_out);
dbms_output.put_line('Error message p_msg_index ->'||i);
APPS.fnd_file.put_line(APPS.FND_FILE.LOG,v_data);
END LOOP;
END IF;
WHEN OTHERS THEN
dbms_output.put_line('An error occured during conversion, SQLCODE ->'|| SQLERRM);
IF (v_msg_count >=1 ) THEN
FOR i IN 1..v_msg_count LOOP
PA_INTERFACE_UTILS_PUB.get_messages(
p_msg_count => v_msg_count,
p_msg_index => i,
p_encoded => 'F',
p_msg_data => v_msg_data,
p_data => v_data,
p_msg_index_out => v_msg_index_out);
dbms_output.put_line('Error message ->'||v_data);
APPS.fnd_file.put_line(APPS.FND_FILE.LOG,v_data);
END LOOP;
END IF;
end; --end procedure
END xxpa_proj_conv_pkg;
* Please tell me how to assign project specific task with the newly created projects??? *
Also please tell me how to assign multiple * Project_Relationship_Code * (ex: END CLIENT, GENERAL CONTRACTOR, PRIMARY) for a particular project during project creation?

Are you not storing the project number in the staging table designed for storing the task data? You can use create_project API to create the project and tasks at the same time with one single call. You may want to try that option

How to import project from Final cut pro 7 to X ?

how to import project from Final Cut Pro 7 to X ?

please tell me if FCP 7can create any kind of file that FCP X can read ?
I can read FCP 7 .mov file with QuickTime, but not with FCP X ? what can I do ?
Sould I use a Premiere on PC to make files compatibles in between 2 apple Softwares ?
I have a lot a files that have been created with FCP 7 and I just buy FCP X , so I am Stuck !!!
thank you in advance

TS1398 how to join wi-fi when it says unable to join?

How to join Wi-Fi when i put the password and it still says unable to join?

Does the iPod connect to other networks?
Do other devices now connect?
Did the iPod connect before?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

How to create project in nwds 7.3

Hi
I imported development track in to nwds 7.3.
How to create project from track , because before this i use 7.0 & 7.1 , there i found inactive dc then created project.
i unale to found inactive dc in 7.3

Hi,
CMS inbox can be figured out this way:
1. go to CMS webui -- Landscape Configurator -- Domain Data tab.
2. notice the path entered into the field Transport folder.
3. your CMS inbox is then <Transport folder>/CMS/inbox
Now make sure the required SCAs are available in this folder, and then go to the CMS webui- Transport studio -- select the track -- on "Check-In" tab check in the SCs, and make sure you import them to both Development and Consolidation. Only after this will you able to create a DC in your NWDS, otherwise everything will be grayed out.
I hope this helps.
Regards,
Ervin

How to publish project to get url?

how to publish project to get url?

Hi
If you publish your Captivate project to Adobe Connect, then you will get a URL which you can provide to your users. Users need to open the URL to play the project.
If you publish your Captivate project which is SCORM compliant, then you need to upload this project to any LMS, you will get a URL which you need to provide to your users, users will open on the URL and project will start playing.
Thanks and Regards
VJ

How to settle project costs to AUC

Dear Experts,
Please teach us how to settle project costs to AUC.
Your response is very much appreciated.

Refer below link
http://help.sap.com/saphelp_erp60_sp/helpdata/en/2a/f9f56e493111d182b70000e829fbfe/frameset.htm
Venkat

How to download Project Gantt chart in to Excel?

Dear Guru's,
Can you please explain me How to download Project Gang chart in to Excel? Please explain me all the steps to download.
Regards,
Sai
Edited by: Virendra Pal on Dec 8, 2009 10:02 AM

hi,
you mean Gantt chart.
a gantt chart is basically a graphical representation of the activities/wbs element based on the dates/durations...
it can be directly downloaded to ms project if you have open PS..
however, if you are using excel, you can easily derive the gantt chart based on the start and finish dates (planned/basic/actual/forecast dates) of the objects...
you can access CN41N then go to Evaluation > Export > Spreadsheet..
with this you can derive the gantt chart based on the data..
regards.
Edited by: Virendra Pal on Dec 8, 2009 10:03 AM

How to join local computer to virtual server domain ?

Hi everyone,
I am new to Window Azure cloud computing. I found many articles and tutorials available online but I am kind of lost because I don't what I need to do to achieve my scenario.
Scenario: I want to migrate my servers to cloud and retire all local servers such as DC and file server. At the same time, I wish to control the network traffic to limit the clients access to Internet resources. I am not sure retiring the
all local servers is something right to do and how to do.
What I have done:
1. Site-to-Site VPN connection with Dell Sonicwall TZ205 to VNet. (I followed the route-based VPN in this document -> https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&ved=0CB0QFjAA&url=https%3A%2F%2Fsupport.software.dell.com%2Fdownload%2Fdownloads%3Fid%3D5343958&ei=ykGhVIK6GISWuASU6oHQBw&usg=AFQjCNGGS6fsuK6IHAWyQgZi5fey4xhfKg&bvm=bv.82001339,d.c2E&cad=rja)
2. Created a VM in the VNet. (I can ping the VM from computers connected to TZ205)
3. Installed active directory and configured the domain forest.
What I need to do:
1. How to join the local computers to the virtual server domain controller with S2S and P2S VPN. (Some Internet resources mentioned I need to install Connect agent in order to do this)
Extra questions:
1. Is it possible to request the clients to provide account credentials before the point-to-site VPN to VNet is established ?
2. How do I configure the TZ205 VPN router to send all the Internet traffic to the VNet instead of the ISP gateway? The computers connected to TZ205 firewall router public IP address doesn't change to the VNet gateway IP.
Thanks for your time reading my questions. It will be helpful if you can provide me some useful links or ideas.
Sincerely,
Chee-Kian

Greetings!
I assume there is connectivity between on-prem device and DC on Azure VM.
You can set the Internal IP of the DC as DNS on the on-prem device and trying joining it to the existing domain. Please note to use S2S VPN.
It is not possible to provide user credentials while connecting to vNet via P2S VPN. It's a certificate based authentication (which is so by design).
With regards to your query to send all internet traffic to vNet instead of ISP gateway. Please refer to Forced Tunneling:
http://msdn.microsoft.com/en-us/library/azure/dn835140.aspx
Hope this helps.
Thank you,
Arvind

How to join THREE different tables into internal table using one select statement .

How to join THREE different tables into internal table using one select statement .
Hi experts,
I would like to request your guidance in solving the problem of joining the data from three different database tables into one internal table
Scenario:
Database tables:
SPFLI
SFLIGHT
SBOOK.
Table Fields:
SPFLI - CARRID CONNID COUNTRYFR CITYFRM COUNTRYTO CITYTO
SFLIGHT - CARRID CONNID FLDATE SEATSMAX SEATSOCC SEATSMAX_C
SEATSOCC_C SEATSMAX_F SEATSOCC_F
SBOOK - CARRID CONNID CLASS
MY INTERNAL TABLE IS IT_XX.
Your help much appreciated.
Thanks in advance.
Pawan.

Hi Pawan,
please check below codes. hope it can help you.
TYPES: BEGIN OF ty_xx,
        carrid     TYPE spfli-carrid   ,
        connid     TYPE spfli-connid   ,
        countryfr TYPE spfli-countryfr,
        cityfrom   TYPE spfli-cityfrom ,
        countryto TYPE spfli-countryto,
        cityto     TYPE spfli-cityto   ,
        fldate     TYPE sflight-fldate ,
        seatsmax   TYPE sflight-seatsmax ,
        seatsocc   TYPE sflight-seatsocc ,
        seatsmax_b TYPE sflight-seatsmax_b,
        seatsocc_b TYPE sflight-seatsocc_b,
        seatsmax_f TYPE sflight-seatsmax_f,
        seatsocc_f TYPE sflight-seatsocc_f,
        class      TYPE sbook-class,
      END OF ty_xx,
      t_xx TYPE STANDARD TABLE OF ty_xx.
DATA: it_xx TYPE t_xx.
SELECT spfli~carrid
       spfli~connid
       spfli~countryfr
       spfli~cityfrom
       spfli~countryto
       spfli~cityto
       sflight~fldate
       sflight~seatsmax
       sflight~seatsocc
       sflight~seatsmax_b
       sflight~seatsocc_b
       sflight~seatsmax_f
       sflight~seatsocc_f
       sbook~class
INTO TABLE it_xx
FROM spfli INNER JOIN sflight
ON spfli~carrid = sflight~carrid
AND spfli~connid = sflight~connid
INNER JOIN sbook
ON spfli~carrid = sbook~carrid
AND spfli~connid = sbook~connid.
Thanks,
Yawa

How to join projects

Similar Messages

Maybe you are looking for