How to join srever osx to windows server 2008
Hi
Can any one advise me on the best way to join OS X Server to Windows server 2008 DC.
My ultimate aim is to manage ipads using OS X server by pulling users from Active Directory within Server 2008.
Thanks
You need to join the OS X Server to Active Directory just like any other Mac. This is done usually using Directory Utlity but can also be done via the command line.
Once you have joined it to AD, you then in Server.app switch to showing Network Accounts. These accounts can then be used to authenticate services in Server.app
Similar Messages
-
How to create restore point in windows server 2008 service pack1
hi i am bhaskar ... how to create restore point in windows server 2008 service pack1 and how to restore system from a restore point in windows server 2008 service pack1.. is this option available or not ? what is the difference between shadow copies and
restore point ? instead of restore point we have this shadow copies option in windows server 2008 ?BhaskarAFIK, Restore Points doesn’t exist in Windows 2008.
Volume Shadow Copy option can be used to achieve:
Creating consistent backups of open files and applications
Creating shadow copies for shared folders
Creating transportable shadow copies using a hardware provider — for backup, testing and data mining scenarios
Quickly recovering and restoring files and data
It is more like a file, data, application backup.
Santhosh Sivarajan | MCTS, MCSE (W2K3/W2K/NT4), MCSA (W2K3/W2K/MSG), CCNA, Network+ Houston, TX
Blogs - http://blogs.sivarajan.com/
Articles - http://www.sivarajan.com/publications.html
Twitter: @santhosh_sivara - http://twitter.com/santhosh_sivara
This posting is provided AS IS with no warranties, and confers no rights. -
How to backup VM in HyperV (Windows Server 2008 R2)
Hello,
Beginner's question: How to backup my VMs on an external
USB disk?
NB: I'm running Windows Server 2008 R2. It's a test machine, don't care with downtime. I want to backup only the VM (VHD files and VM configuration, not the whole server)
ThanksHello,
for Hyper-V usage please ask the experts in
http://social.technet.microsoft.com/Forums/windowsserver/en-US/home?forum=winserverhyperv
Also see
http://technet.microsoft.com/en-us/library/dd405549(v=vs.85).aspx
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://blogs.msmvps.com/MWeber
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
Twitter: -
I have applied IPsec policy on local machine(ip address:10.82.138.76) with windows server 2008 ent r2 installed,only permit local machine to comunicate with itself,one other server(ip address:10.82.138.77) and the gateway device(ip address:10.82.138.1).After
i asigned this policy,i can ping the gateway (ip address:10.82.138.1),and the other server(ip address:10.82.138.77),but i can't ping local machine itself(ip address:10.82.138.76),could anybody tell me why and how to solve this problem?When i applied the same
policy to windows server 2003 ent,i can ping the local machine ip address.Hi,
Thanks for your post.
First, try to ping the loopback address 127.0.0.1. If the loopback test succeeds but you cannot ping the local IP address, please post the unedited
ipconfig /all and route print of the problematic computer.
For test purpose, you may refer to the following lab step by step guide to deployment Tunnel Mode IPsec. Hope it helps.
Windows Firewall and IPsec Policy Deployment Step-by-Step Guide
http://technet.microsoft.com/en-us/library/cc732400(v=ws.10)
Connection Security and IPsec
http://technet.microsoft.com/en-us/library/cc771593(v=ws.10).aspx
Connection Security Rule Wizard: Tunnel Endpoints Page - Client-to-Gateway
http://technet.microsoft.com/en-us/library/dd759083
Best Regards,
Aiden
Aiden Cao
TechNet Community Support -
Problems with RDP/RDC from Mac OSX to Windows Server 2008 on External IP
We have a customer that is using Mac and Microsoft's RDC for Mac to their servers.
They've just upgraded from Windows Server 2003 to 2008 and can't connect through RDP to their TS server on external IP.
Their servers is not in any domain and it work for them to connect to another Windows Server 2008 that is located in their office when they use internal IP.
The problem is that when using RDC to the external IP they get bellow:
"Remote Desktop cannot verify the identity of the computer you want to connect to. This problem can occur if:
The remote computer is running a version of Windows that is earlier than Windows Vista.
The remote computer is configured to support only the RDP security layer.
Contact your network administrator or the owner of the remote computer for assistance."
From here they can choose "Connect" as they did on the Server 2003 but now they get: "Remote Desktop Connection cannot verify the identity of the computer that you want to connect to.Try reconnecting to the Windows-based computer, or contact our administrator."
and is only able to choose "Ok".
I've changed the settings on the "configuration for host server for remote desktop sessions" under General from "RDP-Security Layer" to "Negotiate" and in this case I get a logon windows where i type in all my information click logon. Here I get another
error message which says something like: (We get it in Swedish). "Connection to the windows-based computer broke since there was a problem associated with the licensificationprotocol... Try to connect again" Where I can choose "Cansel" or "reconect"
but it just keeps poping up if i chose reconnect.
I've tried all settings in the TS server and there is not much to change on the RDP client. We have installed the server certificate on the Mac client but it didn't help.
We've also tried with CoRD and it works fine as RDP from a normal Windows based computer.
The only solution I've found on google is to use CoRD instead but we got problems with that connection since it keep crasching on our computer.
In my eyes the problem is on the security requirements that the RDC for Mac needs but I can't find any inforamtion on MS sites about it.
Greatfull for all tips and trix!I too was having the problem same as everyone else. However, for me the problem all started when I replaced my SSL certificate that was used/selected in the Remote Desktop Session Host Configuration utility, connections, RDP-TCP Properties. The security
layer is negotiate and the certificate is the one selected on that screen. It was not licensing related.
The certificate had expired and I didn't believe I needed it. But turns out I did, so I had to generate and validate a new one using GoDaddy (though they specifically were not part of the problem). As my Terminal Servers (Remote desktop servers)
do not have IIS installed, I was a bit stumped on how to create a new certificate request. I finally found some instructions on how to create a certificate request using the MMC snap-in, advanced operations, create custom request. The template
chosen was "legacy key", and without boring the rest of the details that part was the root cause of my problem. The legacy key was not able to be processed correctly by the Mac RDC client. Neither the official 2.1.1 client or the 2.1.2 download.
The Terminal Server system event log was showing the following two errors, 36874 and 36888. The first one contained the best details and said: "An TLS 1.0 connection request was received from a remote client application, but none of the cipher suites
supported by the client application are supported by the server. The SSL connection request has failed." Upon searching the internet for that, I found this page which described the legacy key problem:
http://social.msdn.microsoft.com/Forums/en-US/sqlreportingservices/thread/3a2d2eec-000d-432a-abd7-6b965268c671
So, my solution most familiar to me was to use IIS and create the SSL certificate request, process that with my 3rd party CA, export the certificate with private key and then import that certificate into all of my terminal servers. Then using the session
host configuration tool, pick the new certificate and the problem was now solved. -
How to install oracle 10g in windows server 2008
I want to install oracle 10 (10.2.0.4.0) in windows server 2008 R2 X64 bit version.
Previously i have test this successfully. But not it's giving an error during the installation
Enterprise manager configuratio failed due to the following error-
Error starting Database Control
Refer the log file at (path).....\emConfig.log for more details.
You can retery configuring this database wlth Enterprise Manager later by manually running (path).....\bin\emca script.
I tried to start the service manually from services. But it didn't work.
I tried to run that script using command prompt. but nothing happened.
in my start menu under oracle home db-console link also not there.
here is my log file
Feb 7, 2011 11:54:08 AM oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: Enter Enterprise Manager Root Password :
************Certificate was added to keystore
Certificate reply was installed in keystore
Feb 7, 2011 11:54:08 AM oracle.sysman.emcp.util.FileUtil printFileToLog
CONFIG: Printing file(After Secure DBConsole): D:\oracle\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_AX-2009_AX2009\config\http-web-site.xml
<?xml version = '1.0' standalone = 'yes'?>
<!DOCTYPE web-site PUBLIC "OracleAS XML Web-site" "http://xmlns.oracle.com/ias/dtds/web-site-9_04.dtd">
<web-site port="1158" display-name="OC4J Java HTTP Web Site" secure="TRUE">
<!-- The default web-app for this site, bound to the root -->
<default-web-app application="default" name="defaultWebApp"/>
<web-app application="default" name="dms0" root="/dms0"/>
<web-app application="default" name="dms" root="/dmsoc4j"/>
<web-app application="em" name="em" load-on-startup="true" root="/em" shared="true" />
<!-- Access Log, where requests are logged to -->
<access-log path="../log/http-web-access.log"/>
<!-- Uncomment this if you want to use ODL logging capabilities
<odl-access-log path="../log/http-web-access" max-file-size="1000" max-directory-size="10000"/>
-->
<ssl-config needs-client-auth="false" keystore="D:\oracle\product\10.2.0\db_1/oc4j/j2ee/OC4J_DBConsole_AX-2009_AX2009/config/server/keystore.test" keystore-password="BC062AD3D852A5B5D02E979B69DD12B3" />
</web-site>
Feb 7, 2011 11:54:08 AM oracle.sysman.emcp.util.DBControlUtil secureDBConsole
INFO: Database Control secured successfully.
Feb 7, 2011 11:54:08 AM oracle.sysman.emcp.EMDBPostConfig performConfiguration
CONFIG: Securing Database Control completed successfully .
Feb 7, 2011 11:54:08 AM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Feb 7, 2011 11:54:08 AM oracle.sysman.emcp.util.DBControlUtil startOMS
INFO: Starting Database Control (this may take a while) ...
Feb 7, 2011 11:54:08 AM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: cmdType: 0
Feb 7, 2011 11:54:08 AM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Starting Windows service...OracleDBConsoleAX2009
Feb 7, 2011 11:54:08 AM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAX2009' to fully start
Feb 7, 2011 11:54:18 AM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAX2009' to fully start
Feb 7, 2011 11:54:28 AM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAX2009' to fully start
Feb 7, 2011 11:54:38 AM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAX2009' to fully start
Feb 7, 2011 11:54:48 AM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAX2009' to fully start
Feb 7, 2011 11:54:58 AM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAX2009' to fully start
Feb 7, 2011 11:55:08 AM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAX2009' to fully start
Feb 7, 2011 11:55:18 AM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAX2009' to fully start
Feb 7, 2011 11:55:28 AM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAX2009' to fully start
Feb 7, 2011 11:55:38 AM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAX2009' to fully start
Feb 7, 2011 11:55:48 AM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAX2009' to fully start
Feb 7, 2011 11:55:48 AM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Initialization failure for service during start
Feb 7, 2011 11:55:48 AM oracle.sysman.emcp.EMConfig perform
SEVERE: Error starting Database Control
Refer to the log file at D:\oracle\product\10.2.0\db_1\cfgtoollogs\dbca\AX2009\emConfig.log for more details.
Feb 7, 2011 11:55:48 AM oracle.sysman.emcp.EMConfig perform
CONFIG: Stack Trace:
oracle.sysman.emcp.exception.EMConfigException: Error starting Database Control
at oracle.sysman.emcp.EMDBPostConfig.performConfiguration(EMDBPostConfig.java:646)
at oracle.sysman.emcp.EMDBPostConfig.invoke(EMDBPostConfig.java:224)
at oracle.sysman.emcp.EMDBPostConfig.invoke(EMDBPostConfig.java:193)
at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:184)
at oracle.sysman.assistants.util.em.EMConfiguration.run(EMConfiguration.java:436)
at java.lang.Thread.run(Thread.java:595)
please if any one can give me any solution to run my database console. i don't know any method. i'm new to the oracle.
Thank youI have checked that. but i also say that oracle 10g (10.2.0.4 ) support for windows server 2008 r2 X64.
Windows Server 2008 x64
Oracle Database 10g Release 2 (10.2.0.4 or later) for Windows x64 is certified on Windows Server 2008 x64 (all editions). 32-bit Oracle Database Client (10.2.0.4) and higher versions are supported on Windows Server 2008 x64.
I don'y think it's problem of os version or oracle version. Because when we purchase we asked from them what is the recommended version for our os. they told that 10g 10.2.0.4 is ok. previously i have installed this successfully. But now i can't.
however thanks for tried to help me. if u can find out any other reason\s please late me know..
thank you very much. -
How to get dumpel.exe on windows server 2008 R2
I am new to this so please bear with me. I want to use dumpel.exe to extract security event logs on Win Serv 2008 R2 server. How do I get dumpel.exe recognized by the OS
If I use the wevtutil to send the security logs to a text file, my text file is not readable.
wevtutil epl Security c:\Logs\log.txt
This creates the text file with data but it is not readable. When I try to use the format /f:Text, I get syntax error or message that the parameter is not correct. If you go into the Security Event log and right click on an event and do 'Save Selected
Events' as Tab delimited *.txt. See below.
Keywords Date and Time Source Event ID Task Category
Audit Success 1/31/2014 2:12:55 PM Microsoft-Windows-Security-Auditing 5156 Filtering Platform Connection "The Windows Filtering Platform has permitted a connection.
Application Information:
Process ID: 4
Application Name: System
Network Information:
Direction: Inbound
Source Address: 172.24.255.255
Source Port: 138
Destination Address: 172.24.0.12
Destination Port: 138
Protocol: 17
Filter Information:
Filter Run-Time ID: 0
Layer Name: Receive/Accept
Layer Run-Time ID: 44 -
How to install Oracle Instantclient on Windows Server 2008 Web Edition
I am trying to install the Oracle Instantclient on our Windows Web server (x64).
* I downloaded instantclient-basic-win-x86-64-11.1.0.7.0
* Extracted to c:\instantclient
* appended the directory to the path
* created system variable 'SQL_PATH' with same path
* gave everyone all rights to the instantclient folder
* gave network service explicitly all rights to the instantclient folder
* rebooted IIS
* rebooted the server
But still my application keeps returning with System.Data.OracleClient requires Oracle client software version 8.1.7 or greater.
What am i missing/doing wrong? It seems i have mixed and merged all possible solutions which Google would return.Since System.Data.OracleClient is a Microsoft library, you'd better ask them.
Or use Oracle's provider:
http://www.oracle.com/technology/tech/windows/odpnet/index.html
Yours,
Laurenz Albe -
How to enable hibernation in Windows Server 2008 R2
Hi
I am using Windows Server 2008 R2. I want to enable hibernation on server 2008 R2. I have checked the feature in power options but it dose not show any option for sleep & hibernation. I have tried to enable from command prompt by using powercfg -h on
but getting error message that this feature is not supported by firmware. I have updated the firmware but still getting same error.
Also checked with powercfg /energy & getting given below errors.
Platform Power Management Capabilities:System firmware (BIOS) does not support S3.
The hardware in this computer does not support the S3 sleep state.
Platform Power Management Capabilities:System firmware (BIOS) does not support S4 (Hibernate).
The hardware in this computer does not support the S4 (Hibernate) state.
Platform Power Management Capabilities:PCI Express Active-State Power Management (ASPM) Disabled
PCI Express Active-State Power Management (ASPM) has been disabled due to a known incompatibility
with the hardware in this computer.
Can anyone suggest me how can I enable hibernation on windows server 2008 R2 64 bit.
Thanks.Hello,
I hate to suggest the obvious, but i'd say your hardware does not support sleep or hibernate.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}}) -
Files Transfer from Windows Server 2008 R2 on Mac
Hi,
How can I transfer files from "Windows Server 2008 R2" on Mac? as now I am using 2 App (Microsoft Remote Desktop & Fast Remote Desktop) which allowed me everything but not transfer files on Mac, so any other recommendation or salutation?
ThanksHi,
You need to configure folder redirection.
Folder redirection enables access local folders during the remote session. Click the + button at the bottom of the dialog and choose a folder you want to have
redirected.
Configure Folder Redirection:
1. Click the + button.
2. In the Add Local Folder window, enter the following information:
l
Name: Set a name for the folder to be available during the remote session.
l
Path: Select the path to the folder to be available during the remote session.
3. Click the close button to save the remote desktop.
Getting Started with Remote Desktop Client on Mac
http://technet.microsoft.com/library/dn473012
Hope this helps.
Jeremy Wu
TechNet Community Support -
Weblogic 11g on windows server 2008 - run WLST
how to configure weblogic 11g on windows server 2008 to run a simple WLST script
I managed to get so far on Windows to run a WLST script. Most examples are in Unix
I am in Dos, and ran our set environment variables.
Run java weblogic.WLST
To use WLST in interactive mode:java weblogic.WLST
I get as far as wls:/offline> connect('weblogic','weblogic','localhost:7001')
This works,
So now I am trying to figure out how to display the server state of the server, most examples are for unix.
Would any one have one that shows the server state, number of connections, and the number of active threads or stuck.
Just a a pointer would help me.
CheersYou can refer this
http://weblogic-wonders.com/weblogic/2010/11/13/wlst-script-to-monitor-throughput-and-heapsize-of-weblogic-server/ -
Windows Server 2008 R2: Using PowerShell to send a MSI file to all workstations
Hello!
We are currently using Windows Server 2008 R2. In the upcoming months, we are releasing new software. Instead of touching all the machines with gpupdate /force, we would like to know if we could somehow use Windows PowerShell and send that
command to all the computers in our organization? We are currently in the process of using Group Policy Management to set up the new GPO. After we create them, we would like to send the MSI file to all workstations. I know it is SUPER easy to do within Windows
Server 2012... as I have read articles and seen screenshots. I am just having a hard time figuring out how to make it work with Windows Server 2008 R2.
Thanks!
MeganNew-PSSession -computername Computer
where Computer is one of your remote computers. If that succeeds, great! But I'm guessing it won't and enabling that on all of your computers would require more effort than what you're trying to accomplish in the first place.
Psexec is free to download and you don't have to deploy it:
http://technet.microsoft.com/en-us/sysinternals/bb897553.aspx
As far as identifying your target computers, it really depends on your environment. Get-ADComputer is effective, but the example I provided above would get literally every computer in your active directory - is this something you want to deploy to
any and all servers, workstations, etc? How big and complex is your AD? Is this something you need to coordinate with all your systems around about the same time, or can it be staggered? Do you expect your target computers not to reboot between
now and then? I know that's a lot of questions, but your question is loaded and not easy to answer without knowing more about your environment.
What about this?
http://technet.microsoft.com/en-us/library/jj134201.aspx
There is a requirement to have certain firewall exceptions on your target systems, but hopefully they are because that is the best approach.
I hope this post has helped! -
Upgrading windows server 2003 domain controller to windows server 2008
Hello friedns :
We have a company with about 2000 users , and two windows server 2003 domain controllers , one of them acts as a primary domain controller , and the other acts as secondary domain controller , all the FSMO s are on the primary DC ,we have decided to upgrade all of our servers from windows server 2003 to windows server 2008 , the first step is to upgrade the domain controllers to windows server 2008 , our domain controllers are so sensitive and has to be active 24 hours a day , i have stress upgrading it to windows server 2008 , what is the best solution to upgrade it with no risk ?
( i have an opinion but i am not sure and i dont have any guide about it , i want to install a windows server 2008 and promote it as an additional domain controller to the windows server 2003 DC and the transfer all the FSMOs to it , and then promote the first domain controller !!! is that possible ? if yes , is there any guide about it? )
If there is a guide available for it please let me know . (Specially if there is a tip & trick)
thank you guys.
Network is my LOVEHi,
This TechNet online article might be helpful for you.
How to Upgrade Domain Controllers to Windows Server 2008 or Windows Server 2008 R2
http://technet.microsoft.com/en-us/library/ee522994(WS.10).aspx
For your convenience, I have list some general steps for your reference.
Since the following operation have potential damage to Active Directory database, it is highly suggested that you'd better perform a full backup of Active Directory (System State) firstly. Also it is better to test the following procedure in a similar lab environment first.
General Steps:
=============
1. Verify the new server's TCP/IP configuration has been pointed to the current DNS server.
2. Make the new server become a member server of the current Windows Server 2003 domain first.
3. Upgrade the Windows Server 2003 forest schema to Windows Server 2008 schema with the "adprep /forestprep" command on old server.
Please run the "adprep.exe /forestprep" command from the Windows Server 2008 installation disk on the schema master. To do this, insert the Windows Server 2008 installation disk, and then type the following command:
Drive:\sources\ADPREP\adprep.exe /forestprep
4. Upgrade the Windows 2003 domain schema with the "adprep /domainprep" command on old server.
Please run the "adprep.exe /domainprep" command from the Windows Server 2008 installation disk on the infrastructure master. To do this, insert the Windows Server 2008 installation disk, and then type the following command:
Drive:\sources\ADPREP \adprep.exe /domainprep
5. Insert Windows Server 2008 Installation Disc in the new server.
6. Run "dcpromo" on new server to promote it as an additional domain controller in existing Windows 2003 domain, afterwards you may verify the installation of Active Directory.
Please refer to:
How to Verify an Active Directory Installation in Windows Server 2003
http://support.microsoft.com/kb/816106
7. Verify the new server's TCP/IP configuration has been pointed to current DNS server.
8. Enable Global Catalog on new server and manually Check Replication Topology and afterwards manually trigger replication (Replicate Now) to synchronize Active Directory database between 2 replicas.
Please note: It will some time to replicate GC between DC, please wait some time with patience.
9. Disable Global Catalog on the old DC.
10. Transfer all the FSMO roles from the old DC to the new DC.
Please refer to:
How to view and transfer FSMO roles in Windows Server 2003
http://support.microsoft.com/kb/324801
11. Verify that the old DNS Server Zone type is Active Directory-Integrated. If not, please refer to:
How To: Convert DNS Primary Server to Active Directory Integrated
http://support.microsoft.com/kb/816101
Note: Active Directory Integrated-Zone is available only if DNS server is a domain controller.
12. Install DNS component on new server and configure it as a new DNS Server (Active Directory Integrated-Zone is preferred). All the DNS configuration should be replicated to the new DNS server with Active Directory Replication.
13. Make all the clients change TCP/IP configuration to point to new server as DNS.
14. You may configure TCP/IP on all the clients, or adjust DHCP scope settings to make them use the new DNS server.
Please note: It is a good practice to make the old DC offline for several days and check whether everything works normally with the new server online. If so, you may let the old DC online and run DCPROMO to demote it.
Hope it helps.
Regards,
Wilson Jia
This posting is provided "AS IS" with no warranties, and confers no rights. -
Download issue when Windows 7 Pro joins a Windows Server 2008 Active Directory
Hi,
I purchased 2 new Dell OptiPlex 3010 desktop computers that came with Windows 7 Professional operating system with SP1.
There were no Microsoft updates installed yet. After I added one of these Dell computers to the Windows Server 2008 Active Directory, I was not able to download several items.
Below are several examples:
1) I downloaded the Norton anti-virus installation file. This file is not the full installation of Norton; it is more of a file where you execute it and it will download the full installation from the Internet like from their Norton web
site. So when I executed this installation file, it does not download the full installation files.
It just hung at the screen saying “Downloading” and it will finally stop with an error (don’t remember the error message).
Note: If I have the full Norton installation file then I am able to install it on this computer with no problems.
2) I downloaded the Adobe Reader installation file. This file is not the full installation of Adobe Reader; it is more of a file where you execute it and it will download the full installation from the Internet like from their Adobe web
site. So when I executed this installation file, it hung at the downloading part and then it will error out with a “Actionlist Not Found” message.
Note: If I have the full Adobe Reader installation file then I am able to install it on this computer with no problems.
3) I installed Microsoft Office 2010 Standard version on this computer.
I configured Microsoft Outlook to retrieve emails from my email provider (pop and smtp settings).
After configuring Microsoft Outlook, I was able to send emails through Microsoft Outlook successfully (and very quickly), but he was unable to retrieve my emails. The progress bar for the Receiving in the "Outlook Send/Receive Progress" box
shows no progress. The Progress bar is not moving. There is a message at the bottom of Microsoft Outlook stating "Receiving message 1 of 6 (x.xx KB of x.xx MB)" and it is very slow. My new emails were not being retrieved at all.
I tried various pop and smtp servers that was available for my email provider, but all had the same effect.
4) I can access certain web sites (e.g.
www.yahoo.com, www.cnn.com) while I cannot access other web sites like
www.usatoday.com, my web hosting email site.
Note: I had a Dell computer with Windows XP Professional operating system and this computer does not have any of the above issues.
The above are only a few examples that I have experienced.
If I removed this Dell OptiPlex 3010 computer from the Windows Server 2008 Active Directory then I still experience the same issue.
So as another test, I setup the other new Dell OptiPlex 3010 with the same Windows 7 Professional OS with SP1.
This time, I did not join the Windows Server 2008 Active Directory and I was able to successfully download the full Norton installation files, download the full Adobe Reader installation files, download my emails from Microsoft Outlook 2010, etc.
But once I joined this computer to the Windows Server 2008 Active Directory then I am not able to download these files and emails at all.
It seems like there might be some group policy or a security setting that is preventing these downloads so I disabled the group policy on the Windows Server 2008 AD and Windows 7 Profession OS, but it didn’t resolve the issue.
I disabled all of the firewall programs on this Windows 7 Professional OS, but it still did not resolve the issue.
Since the Windows Server 2008 AD did not have DHCP installed, I installed DHCP and setup a scope.
Then configured the Windows 7 Professional OS to obtain an IP address, but it didn’t resolve the issue.
If I move this Windows 7 Professional computer to another network where it did not have any Active Directory; it just had a wireless router serving DHCP then everything works on the Windows 7 Pro computer.
Any ideas what is the root cause when a Windows 7 Professional computer join a Windows Server 2008 AD?
Thanks,
wl_techHi,
Could you please tell some information for the AD environment and how it connect to the internet?
Regarding 3rd party installlers didn't work as expected, please also seek help in their offical website.
For outlook not receiving emails, could you please take a look in
Event Viewer and see if there are any special errors logged there?
And when trying to access the website like
www.usatoday.com, any special errors IE showed out?
Best regards
Michael Shao
TechNet Community Support -
How to upgrade Windows Server 2008 Foundation to Windows Server 2008 Standard
I have a Dell server with Windows Server 2008 Foundation installed. I am now on a larger network which has their own servers for authentication and the Windows Server 2008 Foundation will not let join a domain with more than 15 users. I was told that I needed
to upgrade Windows server 2008 foundation to Windows server 2008 Standard and that process can be done "in place" but I can't find how do do it. I called Dell and they said they basically said they didn't know what I was talking about.
How do I do this?According to the first one you can perform an in-place upgrade.
Introduction to Windows Server 2008 Foundation
http://technet.microsoft.com/en-us/library/dd459191(WS.10).aspx
How to Perform an In-Place Upgrade on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2
http://support.microsoft.com/kb/2255099
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Maybe you are looking for
-
Webcam runs in background even after the netstream is closed
Hi All, We are having an application for capturing live video from presenter and broadcasting to a viewer. We have coded this using flex as3 and the server is Adobe Media Server. When a broadcasting happens and suddenly the presenter stops the video,
-
Need some pointers please :)
Hi, I've been given an application which I have to modify to edit a 'raw' image, so far I have been able to implement the loading of the image, but I am stuck with editing it. The there are 3 classes to the application, rawimage, skelappipcanvas and
-
File Sender Name Archiving to Receiver
Hello, I've a interface File - RFC. I need archiving the file source with AddTimeStamp. Too, i need passing the name of file source to RFC the question is: what is the name that receiving the RFC, file name original or file name with timestamp? Thank
-
Here is a new one I think. I booted up my Mega 865 this morning and am suddenly getting my FM station through my speakers even though I am in PC mode. Anyone have this issue. If I try to play a cd in Windows Media Center I am still picking up FM and
-
Apart from help.sap.com what are the other sites where I get help on SRM . I am a beginner starting to learn SRM. Also what would be the best approach to learn SRM . I have MM background. Regards. Sanjay