How to join three symbols as shown here in wwi using its features

hello I want to connect three symbols in this position using wwi techniques but was not able to do rotation and use text box to join these object . any help

Dear M D
I am not 100% sure If I understood your requirement The symbols are related to GHS; therefore this type of demand is coming up often; but there are many solutions to handle it; many of them are "quite" tricky to use. Can you show your current result in WWI layout? How doees it look like now? And which WWi code did you use?
C.B.

Similar Messages

How to join THREE different tables into internal table using one select statement .

How to join THREE different tables into internal table using one select statement .
Hi experts,
I would like to request your guidance in solving the problem of joining the data from three different database tables into one internal table
Scenario:
Database tables:
SPFLI
SFLIGHT
SBOOK.
Table Fields:
SPFLI - CARRID CONNID COUNTRYFR CITYFRM COUNTRYTO CITYTO
SFLIGHT - CARRID CONNID FLDATE SEATSMAX SEATSOCC SEATSMAX_C
SEATSOCC_C SEATSMAX_F SEATSOCC_F
SBOOK - CARRID CONNID CLASS
MY INTERNAL TABLE IS IT_XX.
Your help much appreciated.
Thanks in advance.
Pawan.

Hi Pawan,
please check below codes. hope it can help you.
TYPES: BEGIN OF ty_xx,
        carrid     TYPE spfli-carrid   ,
        connid     TYPE spfli-connid   ,
        countryfr TYPE spfli-countryfr,
        cityfrom   TYPE spfli-cityfrom ,
        countryto TYPE spfli-countryto,
        cityto     TYPE spfli-cityto   ,
        fldate     TYPE sflight-fldate ,
        seatsmax   TYPE sflight-seatsmax ,
        seatsocc   TYPE sflight-seatsocc ,
        seatsmax_b TYPE sflight-seatsmax_b,
        seatsocc_b TYPE sflight-seatsocc_b,
        seatsmax_f TYPE sflight-seatsmax_f,
        seatsocc_f TYPE sflight-seatsocc_f,
        class      TYPE sbook-class,
      END OF ty_xx,
      t_xx TYPE STANDARD TABLE OF ty_xx.
DATA: it_xx TYPE t_xx.
SELECT spfli~carrid
       spfli~connid
       spfli~countryfr
       spfli~cityfrom
       spfli~countryto
       spfli~cityto
       sflight~fldate
       sflight~seatsmax
       sflight~seatsocc
       sflight~seatsmax_b
       sflight~seatsocc_b
       sflight~seatsmax_f
       sflight~seatsocc_f
       sbook~class
INTO TABLE it_xx
FROM spfli INNER JOIN sflight
ON spfli~carrid = sflight~carrid
AND spfli~connid = sflight~connid
INNER JOIN sbook
ON spfli~carrid = sbook~carrid
AND spfli~connid = sbook~connid.
Thanks,
Yawa

How to join three tables and practical difference between 10g and 11g

I want to know with example how to outer join three different tables in Oracle.
Also if you have any website or reference for understand syntax or performance difference between 10g and 11g then please paste a link in.thanks!!

Hi,
897293 wrote:
I want to know with example how to outer join three different tables in Oracle.The 3rd table comes into the result set the same way the 2nd one did:
FROM           table_1 t1
LEFT OUTER JOIN      table_2 t2 ON   ...
LEFT OUTER JOIN      table_3 t3 ON   ...The join condition(s) for t3 can reference t1, or t2, or both.
Also if you have any website or reference for understand syntax or performance difference between 10g and 11g then please paste a link in.thanks!!The main manuals all have "What's New" sections near the beginning. For example:
http://download.oracle.com/docs/cd/B28359_01/server.111/b28286/wnsql.htm#sthref5
Hoek,
We've missed you. Welcome back!

How to join three tables?

I have used this query to join three tables but it displays an error : field vbak-vbeln is unknown.
please help me out..
SELECT vbak-vbeln vbak-bstnk vbap-matnr vbap-zmeng makt-maktx
INTO CORRESPONDING FIELDs OF TABLE itab FROM vbak
inner JOIN vbap ON vbak-vbeln eq vbap-vbeln
inner JOIN makt ON vbap-matnr eq makt-matnr
WHERE vbak-bstnk = s_bstnk.

Hi mohan kumar ,
just follow the Syntax
SELECT FLD1 FLD2 FLD3 FLD4 FLD5 INTO CORRESPONDING FIELDS OF TABLE ITAB FROM TABLE1 INNER JOIN TABLE2 ON
TABLE1FLD1 = TABLE2FLD1 INNER JOIN TABLE3 ON TABLE2FLD2 = TABLE3FLD2 INNER JOIN TABL4 ON TABLE3FLD3 = TABLE4FLD3
WHERE FLD1 = 'AA'
Hope this may be helpful.
Please reward points if found ok.
Thanks and regards,
Rajeshwar.

How to join three dimension tables

I have one seperate schema, which consists of only 3 tables(all three tables has dimension fields and fact fields(dim fields =textual fields,fact fields=measures))
How to handle this type of situation in RPD.
Ex: table A,Table b,Table c
Table A needs to join with Table b on many to one relationship.
Table c needs to join with table b on many to one relationship.
Anyone suggest me what is the best way to handle this type of situation.do I require to create dimensional hierarchies for all three tables? Or can I consider only table b as dimension and remaining 2 consider as fact?

This will not be possible. As per dimensional modelling atleast you should have one fact table.
Dimensional tables can be joined to one another if the have flakes(sightly normalized table).
so you have start up the things from DWH.
Regards,
Kishore.

How to join three or more blocks in a form (like master/detail)

I have four data blocks for four tables, lets call them blocks A, B, C, D
Block A is a master block and block B is a detail block, block B holds a foreign key from block A (ofcourse)
Now when i choose in a query data from block A it lists also data from detail block that is corresponding, but now.....
detail block B also holds another foreign key from block C which takes his key from block D. and
i want to make a form that will, when i query master block A, show some data from block B, C and D that is
corresponding to block A.How do i do that?
i'm using 10g and i am a begginer

In each Data Block there are three nodes - triggers, items, and relations. The relations node is what you use to link the master to the detail. If you highlight the Relations node and press create a window will open to create your "New Relation". The master block is already entered because it is the block that you are currently in. You can then pick a detail block by pressing the "select..." button or just type the name of the block in. So if you did this in block A, you would enter B as your detail block. You will then need to enter a join condition. If the PK in block A is named A_DETAIL and the FK in block B is the same name, then you can just type in A_DETAIL, press OK, and the relationship will be automatically created. If the names are different then you could put in a join condition like A.A_DETAIL = B.B_A_DETAIL (whatever the names of the blocks and items are). You can then repeat this process for every parent-child relationship.

How to join three independent vi programs

I have three independent vi programs running successfully. Now I would like to join them together and would like to run in sequence. How can I do that ?
Plz look at the attached files. I would like to run in the sequence of send string, voltage measurement and then again send string. Plz help. Is it possible to write the voltage output program separately very similar to the send string vi having error in and error out wires ?
Attachments:
MCRS_sendString.vi ‏42 KB
MercLib210.dll ‏212 KB
single-point_voltage.vi ‏26 KB

Here's a few notes that explain how to configure the Connector Pane. I took these directly from the LabVIEW Help File.
Selecting a Connector Pane Pattern
Complete the following steps to select a connector pane pattern for a VI.
Right-click the icon in the upper right corner of the front panel window and select Show Connector from the shortcut menu to display the connector pane. The connector pane replaces the icon.
LabVIEW selects a default connector pane pattern for the VI with as many terminals on the left of the connector pane as controls on the front panel and as many terminals on the right of the connector pane as indicators on the front panel. If this is not possible, LabVIEW selects the closest match. If the VI does not have any controls or indicators, LabVIEW selects a connector pane with one terminal.
To select a different connector pane pattern for your VI, right-click the connector pane and select Patterns from the shortcut menu. A solid border highlights the pattern currently associated with your icon. To change the pattern, select a new one.
After you select a connector pane pattern, you can customize it to suit your VI by adding, removing, or rotating the terminals.
To add a terminal to the pattern, place the cursor where you want to add the terminal, right-click, and select Add Terminal from the shortcut menu.
Note: Assigning more than 16 terminals to a VI might decrease performance and reliability. Too many terminals also can reduce the readability and usability of the VI.
To remove an existing terminal from the pattern, right-click the terminal and select Remove Terminal from the shortcut menu.
To change the spatial arrangement of the connector pane patterns, right-click the connector pane and select Flip Horizontal, Flip Vertical, or Rotate 90 Degrees from the shortcut menu.
Assigning Terminals to Controls and Indicators
After you select a pattern to use for the connector pane, you must assign a front panel control or indicator to each of the connector pane terminals. When you link controls and indicators to the connector pane, place inputs on the left and outputs on the right to prevent complicated or confusing wiring patterns in your VIs.
Complete the following steps to assign terminals to controls and indicators in a connector pane.
Right-click the icon in the upper right corner of the front panel window and select Show Connector from the shortcut menu to display the connector pane. The connector pane replaces the icon.
Click a terminal of the connector pane. The tool automatically changes to the Wiring tool, and the terminal turns black. Although you use the Wiring tool to assign terminals on the connector pane to front panel controls and indicators, no wires are drawn between the connector pane and these controls and indicators.
Click the front panel control or indicator you want to assign to the terminal. A marquee highlights the object.
Click an open space of the front panel. The marquee disappears, and the terminal changes to the data type color of the control to indicate that you connected the terminal.
Note: If the connector pane terminal turns white, a connection was not made. Repeat steps 1 through 3 until the connector pane terminal changes to the proper data type color.
Repeat steps 2 through 4 for each control and indicator you want to assign to a terminal.
Ed Dickens - Certified LabVIEW Architect - DISTek Integration, Inc. - NI Certified Alliance Partner
Using the Abort button to stop your VI is like using a tree to stop your car. It works, but there may be consequences.

How to join three queries in sap bw

Hi,
I have to create one report as combination of three reports.
This report will be combination of three Report
ZQ_Ap_005 -- ZCFIAPCO
ZQ_AR_008 u20130FIAR_003
ZQ_AP_016u2014ZCFIAPPU
This condition I have to join
Company Code (005 & 016) = Trading Partner (from ZQ_AR_008)
Vendor (ZQ_AP_005 & 016) = Company code (from ZQ_AR_008)
I can not use infoset because using 3.5 version. And in 3.5 can not include infocube in infoset.
Any suggestion.

Hi Namah
you need not do any java scripting for this. The command is enough to take care of your situation.
Perhaps an example can help you. Suppose you have Query1, Query2 & Query3 and Button1 and Button 2. Button 3
For Query1, through the item properties, set Visiblility=Visible, for Query2, set Visibility=Hidden.
Query3, set Visibility=Hidden.
This will take care of your initial situation.
Now, take button1, assign the command 'Set webitem properties'. In the command settings, set item binding=query1, and then in the next page of command settings set visibility=hidden. Now, click the button -Next COmmand-> Insert -assign the command 'set webitem properties' once again. Here, select the item binding as query2, then in the command settings, set visibilty=visible. What you have done now is assigning 2 commands to the same button, both getting trigerred with a single click.
Now, this command setting will take care of making query1 hidden and query 2 visible.
Similarly, do the settings for the button 2, with query1=visible and query2=hidden.
Now, the result will be that on clicking button1 and button2, you can toggle between your queries.
Hope this helps..

Currency symbol not shown when loaded report using JRC

I'm trying to show the currency symbol in the report file. the .rpt files is already designed with MS Access table but now im reusing the report and populating pojo classes to map with tables. the report that is bound with MS Access table shows currency symbol in currency fields. but when I load report with JRC, it is not showing. I tried to change Fieldformat also programattically as below.
ReportObjectController reportObjectController = report.getReportDefController().getReportObjectController();
ReportObjects reportObjects = reportObjectController.getReportObjectsByKind(ReportObjectKind.field);
if (reportObjects != null && !reportObjects.isEmpty())
                 for (int i = 0; i < reportObjects.size(); i++)
                     IReportObject reportObject = reportObjects.getReportObject(i);
                     if (reportObject instanceof IFieldObject)
                         IFieldObject fieldObject = (IFieldObject) reportObject;
                            IFieldFormat ifFormat = fieldObject.getFieldFormat();
                         ifFormatObject = (IFieldFormat) ifFormat.clone(true);
                         break;
for (int count = 0; count < tables.size(); count++)
                    // Set data source for each table
                    setDataSourceForEachTable(tables.getTable(count).getAlias());
reportObjectController = report.getReportDefController().getReportObjectController();
reportObjects = reportObjectController.getReportObjectsByKind(ReportObjectKind.field);
if (reportObjects != null && !reportObjects.isEmpty())
         for (int i = 0; i < reportObjects.size(); i++)
             IReportObject reportObject = reportObjects.getReportObject(i);
           if (reportObject instanceof IFieldObject)
                         IFieldObject fieldObject = (IFieldObject) reportObject;
                         if (fieldObject.getFieldFormat().getNumericFormat() != null)
                              fieldObject.setFieldFormat(ifFormatObject);
                              //fieldObject.setFieldValueType(FieldValueType.currencyField);
                              break;

Above code just get one of the currency field and clones the format. And after setting the pojo datasource, I'm again setting the cloned format to that particular field. But still Im not getting currency symbol in the reports that are loaded via JRC. even I set locale before opening the report. but that also not helping.
report.setLocale(Locale.UK);
report.open(reportName, 0);
Please guide me, If I'm wrong in this.

HT4557 I don't have the 'iPod ' option in my iPad in settings menu as shown here. I have music option shown. I have 5.1 os installed. How to enable sharing/streaming of music now?

I don't have the 'iPod ' option in my iPad in settings menu as shown here. I have music option shown. I have 5.1.1 os installed. How to enable sharing/streaming of music now?

Yes.
You need to,turn on Home Sharing in iTunes on the computer. The computer and the iPad will need to be on the same wireless network. You will also need to make sure the same AppleID accosiared with your iTunes is also added to the Music app in Settings.

How to remove the '#'symbols for infoobject movement types in bex reporting

Hi All,
I have a problem in Bex reporting. The problem is when ever executing the report that time some of the characteristic values is shown in layout '#' Symbols. i want to remove the '#' valuse in report.
is it possible please give me step by step procedure for how to remove the '#' Symbols in reporing layout.
this is very urgent please help to me on this issue.
Thanks & Regards,
Guna.

Hi Guna,
To achieve this issue, we need to replace the value of #, we need to change the description while retrieving the data from tables. So we need to write some ABAP code in SE38. Go to RSA1 transaction and go to Info objects tab. Then go to context menu for cProject Key Figures as shown below. Click on the Object Overview to get the overview of all the info objects. Here you can see the field names which are used to know the table names.
In SE11, type the table name in Database Table field. Now press F4, then you will get the next screen to select one of the P/Q/S/T tables.
Now click on the button rounded in the below screen to view the data in the table.
Now click the execute button or press F8 to view the records.
Now go to Tcode: SE38. Create a source code and give some program name for that source code. To write code, you need access key. Contact your BASIS for this.
Now write the below code for that particular table in which you want to change the value # to description Blank. In the below source code, we are updating particular table, setting the field as Blank where it is null or no value. Here the field will automatically get updated to # if there is no value or null.
update /BIC/PXXXXX set /BIC/ZXXXX = 'Blank' where /BIC/ZXXXXX is null or /BIC/ZXXXX = ''.
if sy-subrc eq 0.
write 'successful'.
commit work.
else.
write 'unsuccessful'.
endif.
OR
If this # is because of the missing master data than,
right click that IO -> maintain master
you will see first row as a blank.
whatever value you maintain in this row that will come in the report for all Not assigned # values of the master data in the report.
maintain it according to your requirement, save and activate the master data
Hope this helps u...
Regards,
KK.

How to join two internal table rows in alternative manner into one internal table?

How to join two internal table rows in alternative manner into one internal table?
two internal tables are suppose itab1 & itab2 & its data
Header 1
Header 2
Header 3
a
b
c
d
e
f
g
h
i
Header 1
Header 2
Header 3
1
2
3
4
5
6
7
8
9
INTO itab3 data
Header 1
Header 2
Header 3
a
b
c
1
2
3
d
e
f
4
5
6
g
h
i
7
8
9

Hi Soubhik,
I have added two additional columns for each internal table.
Table_Count - It represents the Internal Table Number(ITAB1 -> 1, ITAB2 -> 2)
Row_Count - It represents the Row Count Number, increase the row count value 1 by one..
ITAB1:
Header 1
Header 2
Header 3
Table_Count
Row_Count
a
b
c
1
1
d
e
f
1
2
g
h
i
1
3
ITAB2:
Header 1
Header 2
Header 3
Table_Count
Row_Count
1
2
3
2
1
4
5
6
2
2
7
8
9
2
3
Create the Final Internal table as same as the ITAB1/ITAB2 structure.
"Data Declarations
DATA: IT_FINAL LIKE TABLE OF ITAB1.          "Final Internal Table
FIELD-SYMBOLS: <FS_TAB1> TYPE TY_TAB1,     "TAB1
                               <FS_TAB2> TYPE TY_TAB2.     "TAB2
"Assign the values for the additional two column for ITAB1
LOOP AT ITAB1 ASSIGNING <FS_TAB1>.
     <FS_TAB1>-TABLE_COUNT = 1.             "Table value same for all row
     <FS_TAB1>-ROW_COUNT = SY-TABIX. "Index value
ENDLOOP.
"Assign the values for the additional two column for ITAB2
LOOP AT ITAB2 ASSIGNING <FS_TAB2>.
     <FS_TAB2>-TABLE_COUNT = 2.                  "Table value same for all row
     <FS_TAB2>-ROW_COUNT = SY-TABIX.      "Index value
ENDLOOP.
"Copy the First Internal Table 'ITAB1' to Final Table
IT_FINAL[] = ITAB1[].
"Copy the Second Internal Table 'ITAB2' to Final Table
APPEND IT
LOOP AT ITAB2 INTO WA_TAB2.
APPEND WA_TAB2 TO IT_FINAL.
ENDLOOP.
"Sort the Internal Table based on TABLE_COUNT & ROW_COUNT
SORT IT_FINAL BY ROW_COUNT TABLE_COUNT.
After sorting, check the output for IT_FINAL Table, you can find the required output as shown above.
Regards
Rajkumar Narasimman

How do I replace -| symbol with paragraph mark?

I edit a newsletter. Some of the contributors send their articles inline (not as attachments). Some of them have a non printing special character that looks like a bent left arrow instead of a paragraph mark. I think it is one of the first ascii characters, but don't know which one.
How can I use find/replace to change these to paragraph symbols?

I suspect they compose in Word or similar and then paste into Thunderbird. Something like that bent arrow symbol appears in Word when you use shift+return, though it's not clear why your contributors would be using it; maybe force of habit, or they don't know any better. ;-)
Shift+return is a handy way to force a line end without creating a paragraph break. Useful in bullet point lists to create multiple paragraphs, or organize pictures. Or they're using something like an Apple which uses non-standard line breaks.
I don't think Thunderbird's editing tools are capable of doing the search-and-replace that you have asked about.
If you want to do all your editing inside Thunderbird, you may be able to copy then use "paste without formatting" (ctrl+shift+v) to eliminate these line breaks. Doing this will also remove other formatting, so may create more problems than it solves.
I think in your position I'd take the text away to a better-than-average editor where a proper search-and-replace could be done, or you could select the lines and join them. Notepad++ would be my choice on Windows, probably Bluefish on Linux.
And a proper word processor may also be able to tidy it up, but the challenge then would be to avoid importing all the formatting overheads that would come with it when copy-and-pasted from the word processor into Thunderbird. Again, Thunderbird's "paste without formatting" might be useful here too.

Code to Join three tables.

Hi All,
I am a fresher to this ABAP.
I have an task to join three tables which doesn't take much effort. But the problem is: the tables have same columns, (name, age and city) in all the three tables.
The layout is as shown below:
Table 1 ( T1 )            Table 2 ( T2 )          Table 3 ( T3 )
name | age | city      name | age | city        name | age | city    -
Anju   21     HDD      Anju   20     BGH       Anju    21    SFF
Julie   23     JUH       Julie   24     JUH        Julie   20     JUH
Now, there should be a selection screen. If I enter a value for this varaible as "Anju", The output should be like:
Col       T1        T2      T3
Name    Anju     Anju    Anju
Age       21        20       21
City       HDD    BGH    SFF
I am unable to appraoch how to solve this issue. Any pointers would be of great help.
Thanks in advance,
Anjum.
Edited by: nasarat anjum on Apr 23, 2008 8:43 AM

Hi,
U can take three internal tables for each of ur tables T1,T2,T3. Fetch the respective table data into ur internal tables.
Then write,
loop at itab1.
read table itba2 with key name eq itab1-name.
read table itab3 with key name eq itab1-name.
write : / name under <name heading>,
            itab1-name under <T1 heading>,
            itab2-name under <T2 heading>,
            itab3-name under <T3 heading>.
write : / age under <age heading>,
            itab1-age under <T1 heading>,
            itab2-age under <T2 heading>,
            itab3-age under <T3 heading>.
write : / city under <city heading>,
            itab1-city under <T1 heading>,
            itab2-city under <T2 heading>,
            itab3-city under <T3 heading>.
<removed by moderator>
Thanks
Edited by: Mike Pokraka on Aug 6, 2008 8:30 AM

How to join two pl/sql tables .,.,,Urgent pls help

Hi,
Please tell me how to join to pl/sql tables with example
thanks
asp

If your main intention is to get the common records/or getting whole records from the 2 different pl/sql arrays then , pls check this piece of code & explanation
The SQL language has long offered the ability to apply set operations (UNION, INTERSECT, and MINUS) to the result sets of queries. In Oracle Database 10g, you can now use those same high-level, very powerful operators against nested tables (and only nested tables) in your PL/SQL programs and on nested tables declared as columns inside relational tables.
Let's take a look at some of the syntax needed to do this, starting with UNION.
First, I create a schema-level nested table type:
CREATE OR REPLACE TYPE strings_nt
IS TABLE OF VARCHAR2(100);
Then I define a package and within it create and populate two nested tables of this type, each containing some of my father's and my favorite things:
CREATE OR REPLACE PACKAGE favorites_pkg
IS
my_favorites strings_nt
:= strings_nt ('CHOCOLATE'
, 'BRUSSEL SPROUTS'
, 'SPIDER ROLL'
dad_favorites strings_nt
:= strings_nt ('PICKLED HERRING
, 'POTATOES'
, 'PASTRAMI'
, 'CHOCOLATE'
PROCEDURE show_favorites (
title_in IN VARCHAR2
, favs_in IN strings_nt
END;
In this package, I also include a procedure to show the contents of a strings_nt nested table. This will come in very handy shortly.
By defining these collections in a package, outside any program, they persist (they maintain their state and values) for the duration of my session or until I change or delete them. This means that I can now write programs outside the package to manipulate the contents of those collections.
Note that this package has been simplified for the purposes of presenting collection functionality. In a production application, you should always take care to "hide" your package data, as with these collections, in the package body, and then provide procedures and functions to manage the data.
Suppose, for example, that I would like to combine these two collections into a single collection of our favorites. Prior to Oracle Database 10g, I would have to write a loop that transfers the contents of one collection to another. Now, I can rely on the MULTISET UNION operator, as shown below:
DECLARE
our_favorites
strings_nt := strings_nt ();
BEGIN
our_favorites :=
favorites_pkg.my_favorites
MULTISET UNION ---- Use INTERSECT , if you want to know common records
favorites_pkg.dad_favorites;
favorites_pkg.show_favorites (
'ME then DAD', our_favorites);
END;
The output from this script is:
ME then DAD
1 = CHOCOLATE
2 = BRUSSEL SPROUTS
3 = SPIDER ROLL
4 = PICKLED HERRING
5 = POTATOES
6 = PASTRAMI
7 = CHOCOLATE
------------------------------

How to join three symbols as shown here in wwi using its features

Similar Messages

Maybe you are looking for