How to keep 2 users seperate
Hi all
Both me and the missus now have ipods but it is proving a chore manually sorting out the albums for each other
when either ipod is connected the same library comes up, so if i only want to add some songs to mine i have to then copy them manually to my ipod again before i sync it
Is there any way to have 2 seperate accounts which are totally seperate? i.e. tracks and playlista re not available to both of us so i can just put evrything into the library and sync it
Message was edited by: dale_moseley19
When the iPods belong to different people, there are basically three ways of using multiple iPods on a computer and these involve:
a) Sharing a single iTunes library
b) Creating Multiple Libraries in a single user account
c) Creating multiple user accounts.
Note: When you are sharing an iTunes library, you don't have to set each iPod to update in the same manner, you can mix and match from the options below as each iPod has it's own update settings
Sharing a Library and/or User Account
If you want to share the one library, you can set either or all of the iPods so that they only get updated with only certain playlists (you can update from more than one if you wish): Loading songs onto iPod automatically - Windows
Choosing the update option "Sync Music - Selected playlists" allows you to create a playlist specifically for the iPod and drag the tracks you want into it. If you tire of the list and want to change it, you just add or remove the songs you don't want. The ones you take out out remain in the library to be used some other time if you choose. You can read more about playlists at these links:
iTunes: Creating playlists of your favorite songs
How to create a Smart Playlist with iTunes
Or you can choose to update any or all of the iPods manually and just drag whatever content you want to them: Managing content manually on iPod
Loading the iPod shuffle differs slightly but it can still be used with the others, for details have a look at this page: Loading songs onto iPod shuffle - Windows
Multiple Libraries
It's also possible to have multiple libraries in a single account. To create or access a second (or more) library, hold down the Option key (or Shift key in Windows) when launching iTunes 7. In the resulting dialogue you will get the option to create a new library or navigate to the other Library.
Note: You can only have one Library open at a time and iTunes will default to the last library opened if you don't use the keyboard command to choose one. This can prove tricky when using multiple iPods, if you don't use the keyboard command you can risk syncing to the wrong library: Using multiple iTunes libraries -Windows
Separate User Accounts
Another option is to create a separate User account for each person on your PC or Mac. Different accounts by definition would give you completely separate libraries. Each account has it's own iTunes folder, Library and iTunes Music folder and you load it with CDs etc just as you did with your original one. The iPod can be set to update however the owner chooses, sync all, manual or sync specific playlists
I don't use Windows so I can't give you a step by step on that one, however I can point you to another web page which should help you out. You can read about Windows user accounts here: Using Windows XP User Accounts
Similar Messages
-
CRM - SAP ECC 6.0- How to keep creation user data
Hello gurus,
I'm working on a SAP project which scope is CRM - ECC6.0 (IS-U +SD) - BI 7.0 and we are facing an issue trying to extract from IS-U the user who created a business operation.
You have to know that process designed is :
- business operation is created in CRM (as for business partner, contract account ...) by a user A.
- business operation is replicated from CRM to IS-U
- Communication user set up is called RFCUSER.
So that every business operations created in CRM, is created in IS-U and get mentioned in user creation area : RFCUSER instead of user A.
Similarly when an business operation is modified from ISU to CRM, the modification user is RFCUSER.
This is an issue when we try to know which user has created this business operation in ISU. We must go in CRM to read data.
So I want to konw if it's possible to change the communication user (make every user a communication user. It seems to be the worst solution, or if we can change bdoc structure exchange to keep creation user data, or if a customizing exists to solve this issue).
Thanks in advance for your answers.
Jacques Toubon.Hello
Please give me suggestions on prerequisites for upgrade.
Start with these SAP notes and the guide.
https://websmp208.sap-ag.de/~sapidb/011000358700001228732011
1566412 - Enhancement package 6 for SAP ERP 6.0: Required SWC
1496212 - EHP6 for SAP ERP 6.0 SP stacks - Release & Information Note
1598141 - SAP Enhancement Package 6 for SAP ERP 6.0:Compatible Add-ons
1.How can we decide it is one step proces or two step process?
Upgrade from EHP4 to EHP6 is a single upgrade.
Bear in mind that EHP6 needs a higher version of OS and DB.
Please check PAM for supported OS and DB for EHP6
2.can we skip shadow instance creation step??
Download the SUM guide and read the chapter "Preconfiguration Mode Planning" and the "Current Capabilities" section. Here is the SUM guide for SAP on Unix with Oracle.
https://websmp208.sap-ag.de/~sapidb/011000358700000783532011E
There are different upgrade scenarios. The section "Recommendations for Choosing the Preconfiguration Mode" explains the use of each mode and the mode you should select.
3.can we copy sum tool in /usr/sap/sid/sum??
Yes you can. But I suggest you to create a new file system called /usr/sap/SID/SUM for the upgrade purpose instead of creating a directory called SUM under /usr/sap/SID file system.
Regards
RB -
Not sure what im doing but here goes. There are two of us using itunes on the same lap top with different devices. How do I create a seperate account for me and my device.
The best way is to have each library in a separate Windows User ID.
-
How do you keep two users logged in at the same time?
How do I keep two users logged in at the same time to be able to access home sharing?
Fast User Switching in Users & Groups or Accounts preferences in Login Options.
-
How to keep the filtered output in a page after user navigates back?
How to keep the filtered output in a page after user navigates back to all records from another page.
Currently it clears the searchHi,
user13091824 wrote:
How to keep the filtered output in a page after user navigates back to all records from another page.
Currently it clears the search---While returing from page AM Return status should be True in pageContext.setForwardURL.:::
pageContext.setForwardURL("OA.jsp?page=/XXX/oracle/apps/po/msg/webui/SearchPG",
"SUPP_SEARCH",
OAWebBeanConstants.GUESS_MENU_CONTEXT,
null,
null,
true, // Retain AM
OAWebBeanConstants.ADD_BREAD_CRUMB_NO,
OAWebBeanConstants.IGNORE_MESSAGES);
---After setting AM Status to true u can able to c the values.
Regards
Meher Irk -
How to keep track of the users who are all currently logged in
Hi All,
I have basic knowledge of Session and Servlets. I am wondering how to keep track of the users who are all currently logged in. There should be some way of achieving it.
I thought of it and come up with having an Application variable that hold it when ever a user successfully logged in.
Thanks in advance for any reply.You can do this by keeping data in a static veriable in a some class of yours. The variable will need to be a collection.
Whenever a user loogs in to the site a servlet/jsp should put the users information in to the collection and when logs off or when the session expires the entry should be take off.
You can achive this by storing the velues in a some sort of a week collection where the entries are automaticaly removed when all the other refferences to the entry goes out of scope.
You might need to read bit about java.lang.ref package and WeekReference
Or you can make the entry in the collection contain the last time that the user visited any of the pages and a thread can run time to time and clean up the older entries which have timed out -
How to Keep all the Portal report menu's are "open" when the user logs on?
Hi
I have a question about the BI Portalu2019s configuration. Does anyone know how to keep the Web Portal (i-vew) report menu's are "open" when the user logs on?
Thanks.
For example:
Web Report Panel
Report Folder A
i-view a1
i-view a2
i-view a3
i-view a4
i-view a5
i-view a6
Report Folder B
i-view b1
i-view b2
i-view b3
i-view b4
i-view b5
i-view b6Hi,
Thank you very much. The problem is the Folder didn't 'open when the user logs on. Yes, the iview can be openned. Does anyone know how to set the default Open for the Folder. My question is about the folder in BI portal. Yes, the ivew we can set the defaul Open but we have Folder in the portal and our user wants to be able to see the report lists when they log on to the Portal.
For example:
Our Current situation
Navigation Panel
.>Act vs Plan report Folder_
.>Year to Day report Folder_
Hope To Be (When user logs on the BI Portal)
Navigation Panel
.>Act vs. Plan report Folder
(i-view) Report A
(i-view) Report B
(i-view) Report C
(i-view) Report D
(i-view) Report E
.>Year to Day report Folder
(i-view) Budget by Cost Element report
(i-view) Actual by Cost Center report
(i-view) Income statement report
(i-view) Balance Sheet report -
How do I change user name on apps store , it keeps showing a different email when I wanna buy apps.
Go to Settings > iTunes & App Stores touch AppleID, sign off, and sign on with the proper AppleID.
-
Larry63
Jun 12, 2012 8:54 AM
Subject:
My IPad (1) keeps showing " user name or password incorrect" .I go to settings and all is okay ,I even deleted email account and reentered the info .How do I correct?
iPad
I have this question too (0) Categories: Mail and Address bookCheck the outgoing mail server setting. Make sure that your username and password are in there.
Settings>Mail, Contacts, Calendars>Your email account>Account>Outgoing mail server - tap the server name next to SMTP and check in the primary server and make sure your username and password are entered and correct - even if it says that the password is optional. -
Subject:
My IPad (1) keeps showing " user name or password incorrect" .I go to settings and all is okay ,I even deleted email account and reentered the info .How do I correct?Maybe ask someone in the Apple iPad forum. This is the Snow Leopard forum.
-
How can i keep my contacts seperate from my wifes with ios5
After installing ios5 the only way to add or edit contacts was to merge them on icloud now i have my son's and wifes's contacts on my devices because we all sync upmto the same pc with the same apple id. We would prefer to keep our conacts seperate.
I've been looking into this as well, since my husband and I each have an iPod and use the same iTunes Store account. I haven't tried this yet, but it sounds like you can set up each person with their own iTunes account and thus their own iCloud account for backups and then go into the Store settings and put the original Store account back in.
I'm waiting to update hubby's iPod because I want to make sure my devices work OK. He's not technically inclined and would panic if he had a problem, so I'll be doing his updating. I really want this tactic to work because he rarely syncs his iPod so I want that cloud backup to go automatically. I've told him that he's responsible for his own data, but I'd still have to listen to the complaining if he loses all his Angry Birds scores. -
How to get the user input while server is waiting for client's message
I have a server/client program (using sockets)
I used a thread to let a server always waiting for client's request, but how should I found that
there is no message pass to server from client.
public void run(){
while (true){
Socket server = serverP.accept();
ObjectInputStream inFromClient = new ObjectInputStream(server.getInputStream());
inMessage = (Message)inFromClient.readObject();
System.out.println("Deadlock may occurred, please enter your command: ");
BufferedReader inFromUser = new BufferedReader(new InputStreamReader(System.in));
String command = inFromUser.readLine();
The server is waiting for the inMessage that is passed from multiple clients. But if the server
received no message after some time, it will assume something is wrong (eg, there is a
deadlock), then it will ask the user to input the command to execute the method.
If I put
"System.out.println("Do you want to take Snapshot: ");
BufferedReader inFromUser = new BufferedReader(new InputStreamReader(System.in));
String command = inFromUser.readLine();"
inside the while loop, it will keep asking user to enter the input when every time the client
connect to the server. But I want to ask the user to enter the command only when the server
can't get the response from clients.
How should I do?
Please help.Your statement:
Socket server = serverP.accept();
it will block until Server receive connect request from client.
So, what u can do is, create a seperate Thread which check if server is idle (no client connect to it) for a certain time.
public class xxxxx extends Thread {
public void run(){
(new WatcherThread()).start()
while (true){
Socket server = serverP.accept();
WatcherThread.acceptFlag();
ObjectInputStream inFromClient = new ObjectInputStream(server.getInputStream());
inMessage = (Message)inFromClient.readObject();
Do something with client request ...
I suggest you to create a WorkerThread for
each client request.
For example:
new (WorkerThread(inMessage)).start();
This way, your server thread will immediately serve
the next client request ASAP.
public class WatcherThread extends Thread {
private static accept = false;
public static void acceptFlag() {
flag = true;
public void run() {
while(true) {
try { sleep(10000); } catch (Exception ex) { }
if (!accept) { // never accepted after 10000 msecs
... do your System.in here ...
flag=false;
}The idea is, your server notify WatcherThread if a client connect. WathcerThread runs at seperate thread. It waits for 10000 msecs and check if Server ever gets connect request from server. If it doesn't then you can do your System.in, otherwise, it will wait for 10000 again..
FYI, next time, please use [ code ] and [ / code ] to format your code. It discourage me to read plain whole-left-aligned code like yours.
See: http://forum.java.sun.com/features.jsp#Formatting
rgds,
Alex -
How to get All Users from OID LDAP
Hi all,
I have Oracle Internet Directory(OID) and have created the users in it manually.
Now I want to extract all the users from OID. How can I get Users from OID??
Any response will be appritiated. If some one could show me demo code for that I shall be greatful to you.
Thanks and reagards
Pravyhi,
the notes from metalink:
bgards
elvis
Doc ID: Note:276688.1
Subject: How to copy (export/import) the Portal database schemas of IAS 9.0.4 to another database
Type: BULLETIN
Status: PUBLISHED
Content Type: TEXT/X-HTML
Creation Date: 18-JUN-2004
Last Revision Date: 05-AUG-2005
How to copy (export/import) Portal database schemas of IAS 9.0.4 to another database
Note 276688.1
Download scripts Unix: Attachment 276688.1:1
Download Perl scripts (Unix/NT) :Attachment 276688.1:2
This article is being delivered in Draft form and may contain errors. Please use the MetaLink "Feedback" button to advise Oracle of any issues related to this article.
HISTORY
Version 1.0 : 24-JUN-2004: creation
Version 1.1 : 25-JUN-2004: added a link to download the scripts from Metalink
Version 1.2 : 29-JUN-2004: Import script: Intermedia indexes are recreated. Imported jobs are reassigned to Portal. ptlconfig replaces ptlasst.
Version 1.3 : 09-JUL-2004: Additional updates. Usage of iasconfig.xml. Need only 3 environment variables to import.
Version 1.4 : 18-AUG-2004: Remark about 9.2.0.5 and 10.1.0.2 database
Version 1.5 : 26-AUG-2004: Duplicate job id
Version 1.6 : 29-NOV-2004: Remark about WWC-44131 and WWSBR_DOC_CTX_54
Version 1.7 : 07-JAN-2005: Attached perl scripts (for NT/Unix) at the end of the note
Version 1.8 : 12-MAY-2005: added a work-around for the WWSTO_SESS_FK1 issue
Version 1.9 : 07-JUL-2005: logoff trigger and 9.0.1 database export, import in 10g database
Version 1.10: 05-AUG-2005: reference to the 10.1.2 note
PURPOSE
This document explains how to copy a Portal database schema from a database to another database.
It allows restoring the Portal repository and the OID security associated with Portal.
It can be used to go in production by copying physically a database from a development portal to a production environment and avoid to use the export/import utilities of Portal.
This note:
uses the export/import on the database level
allows the export/import to be done between different platforms
The script are Unix based and for the BASH shell. They can be adapted for other platforms.
For the persons familiar with this technics in Portal 9.0.2, there is a list of the main differences with Portal 9.0.2 at the end of the note.
These scripts are based on the experience of a lot of persons in Portal 902.
The scripts are attached to the note. Download them here: Attachment 276688.1:1 : exp_schema_904.zip
A new version of the script was written in Perl. You can also download them, here: Attachment 276688.1:2 : exp_schema_904_v2.zip. They do exactly the same than the bash ones. But they have the advantage of working on all platforms.
SCOPE & APPLICATION
This document is intented for Portal administrators. For using this note, you need basic DBA skills.
This notes is for Portal 9.0.4.x only. The notes for Portal 9.0.2 are :
Note 228516.1 : How to copy (export/import) Portal database schemas of IAS 9.0.2 to another database
Note 217187.1 : How to restore a cold backup of a Portal IAS 9.0.2 on another machine
The note for Portal 10.1.2 is:
Note 330391.1 : How to copy (export/import) Portal database schemas of IAS 10.1.2 to another databaseMethod
The method that we will follow in the document is the following one:
Export:
- export of the 4 portal schemas of a database (DEV / development)
- export the LDAP OID users and groups (optional)
Install a new machine with fresh IAS installation (PROD / production)
Import:
- delete the new and empty portal schema on PROD
- import the schemas in the production database in place of the deleted schemas
- import the LDAP OID users and groups (optional)
- modify the configuration such that the infrastructure uses the portal repository of the backup
- modify the configuration such that the portal repository uses the OID, webcache and SSO of the new infrastructure
The export and the import are divided in several steps. All of these steps are included in 2 sample scripts:
export : exp_portal_schema.sh
import : imp_portal_schema.sh
In the 2 scripts, all the steps are runned in one shot. It is just an example. Depending of the configuration and circonstance, all the steps can be runned independently.
Convention
Development (DEV) is the name of the machine where resides the copied database
Production (PROD) is the name of the machine where the database is copied
Prerequisite
Some prerequisite first.
A. Environment variables
To run the import/export, you will need 3 environment variables. In the given scripts, they are defined in 'portal_env.sh'
SYS_PASSWORD - the password of user sys in the Portal database
IAS_PASSWORD - the password of IAS
ORACLE_HOME - the ORACLE_HOME of the midtier
The rest of the settings are found automatically by reading the iasconfig.xml file and querying the OID. It is done in 'portal_automatic_env.sh'. I wish to write a note on iasconfig.xml and the way to transform it in usefull environment variables. But it is not done yet. In the meanwhile, you can read the old 902 doc, that explains the meaning of most variables :
< Note 223438.1 : Shell script to find your portal passwords, settings and place them in environment variables on Unix >
B. Definition: Cutter database
A 'Cutter Database' is the term used to designate a Database created by RepCA or OUI and that contains all the schemas used by a IAS 9.0.4 infrastructure. Even if in most cases, several schemas are not used.
In Portal 9.0.4, the option to install only the portal repository in an empty database has been removed. It has been replaced by RepCA, a tool that creates an infrastructure database. Inside all the infrastucture database schemas, there are the portal schemas.
This does not stop people to use 2 databases for running portal. One for OID and one for Portal. But in comparison with Portal 9.0.2, all schemas exist in both databases even if some are not used.
The main idea of Cutter database is to have only 1 database type. And in the future, simplify the upgrades of customer installation
For an installation where Portal and OID/SSO are in 2 separate databases, it looks like this
Portal 9.0.2 Portal 9.0.4
Infrastructure database
(INFRA_SID)
The infrastructure contains:
- OID (used)
- OEM (used)
- Single Sign-on / orasso (used)
- Portal (not used)
The infrastructure contains:
- OID (used)
- OEM (used)
- Single Sign-on / orasso (used)
- Portal (not used)
Portal database
(PORTAL_SID)
The custom Portal database contains:
- Portal (used)
The custom Portal database (is also an infrastructure):
- OID (not used)
- OEM (not used)
- Single Sign-on / orasso (not used)
- Portal (used)
Whatever, the note will suppose there is only one single database. But it works also for 2 databases installation like the one explained above.
C. Directory structure.
The sample scripts given inside this note will be explained in the next paragraphs. But first, the scripts are done to use a directory structure that helps to classify the files.
Here is a list of important files used during the process of export/import:
File Name
Description
exp_portal_schema.sh
Sample script that exports all the data needed from a development machine
imp_portal_schema.sh
Sample script that import all the data into a production machine
portal_env.sh
Script that defines the env variable specific to your system (to configure)
portal_automatic_env.sh
Helper script to get all the rest of the Portal settings automatically
xsl
Directory containing all the XSL files (helper scripts)
del_authpassword.xsl
Helper script to remove the authpassword tags in the DSML files
portal_env_unix.sql
Helper script to get Portal settings from the iasconfig.xml file
exp_data
Directory containing all the exported data
portal_exp.dmp
export on the database level of the portal, portal_app, ... database schemas
iasconfig.xml
copy the name of iasconfig.xml of the midtier of DEV. Used to get the hostname and port of Webcache
portal_users.xml
export from LDAP of the OID users used by Portal (optional)
portal_groups.xml export from LDAP of the OID groups used by Portal (optional)
imp_log
Directory containing several spool and logs files generated during the import
import.log Log file generated when running the imp command
ptlconfig.log
Log generated by ptlconfig when rewiring portal to the infrastructure.
Some other spool files.
D. Known limitations
The scripts given in this note have the following known limitations:
It does not copy the data stored in the SSO schema: external applications definitions and the passwords stored for them.
See in the post steps: SSO migration to know how to do.
The ssomig command resides in the Infrastructure Oracle home. And all commands of Portal in the Midtier home. And practically, these 2 Oracle homes are most of the time not on the same machine. This is the reason.
The export of the users in OID exports from the default user location:
ldapsearch .... -b "cn=users,dc=domain,dc=com"
This is not 100% correct. The users are by default stored in something like "cn=users,dc=domain,dc=com". So, if the users are stored in the default location, it works. But if this location (user install base) is customized, it does not work.
The reason is that such settings means that the LDAP most of the time highly customized. And I prefer that the administrator to copy the real LDAP himself. The right command will probably depend of the customer case. So, I prefered not to take the risk..
orclCommonNicknameAttribute must match in the Target and Source OID .
The orclCommonNicknameAttribute must match on both the source and target OID. By default this attribute is set to "uid", so if this has been changed, it must be changed in both systems.
Reference Note 282698.1
Migration of custom Java portlets.
The script migrates all the data of Portal stored in the database. If you have custom java portlet deployed in your development machine, you will need to copy them in the production system.
Step 1 - Export in Development (DEV)
To export a full Portal installation to another machine, you need to follow 3 steps:
Export at the database level the portal schemas + related schemas
Get the midtier hostname and port of DEV
Export of the users and groups with LDAPSEARCH in 2 XML files
A script combining all the steps is available here.
A. Export the 4 portals schemas (DEV)
You need to export 3 types of database schemas:
The 4 portal schemas created by default by the portal installation :
portal,
portal_app,
portal_demo,
portal_public
The schemas where your custom database portlets / providers resides (if any)
- The custom schemas you have created for storing your portlet / provider code
The schemas where your custom tables resides. (if any)
- Your custom schemas accessed by portal and containing only data (tables, views ...)
You can get an approximate list of the schemas: default portal schemas (1) and database portlets schemas (2) with this query.
SELECT USERNAME, DEFAULT_TABLESPACE, TEMPORARY_TABLESPACE
FROM DBA_USERS
WHERE USERNAME IN (user, user||'_PUBLIC', user||'_DEMO', user||'_APP')
OR USERNAME IN (SELECT DISTINCT OWNER FROM WWAPP_APPLICATION$ WHERE NAME != 'WWV_SYSTEM');
It still misses your custom schemas containing data only (3).
We will export the 4 schemas and your custom ones in an export file with the user sys.
Please, use a command like this one
exp userid="'sys/change_on_install@dev as sysdba'" file=portal_exp.dmp grants=y log=portal_exp.log owner=(portal,portal_app,portal_demo,portal_public)The result is a dump file: 'portal_exp.dmp'. If you are using a database 9.2.0.5 or 10.1.0.2, the database of the exp/imp dump file has changed. Please read this.
B. Hostname and port
For the URL to access the portal, you need the 2 following infos to run the script 'imp_portal_schema.sh below :
Webcache hostname
Webcache listen port
These values are contained in the iasconfig.xml file of the midtier.
iasconfig.xml
<IASConfig XSDVersion="1.0">
<IASInstance Name="ias904.dev.dev_domain.com" Host="dev.dev_domain.com" Version="9.0.4">
<OIDComponent AdminPassword="@BfgIaXrX1jYsifcgEhwxciglM+pXod0dNw==" AdminDN="cn=orcladmin" SSLEnabled="false" LDAPPort="3060"/>
<WebCacheComponent AdminPort="4037" ListenPort="7782" InvalidationPort="4038" InvalidationUsername="invalidator" InvalidationPassword="@BR9LXXoXbvW1iH/IEFb2rqBrxSu11LuSdg==" SSLEnabled="false"/>
<EMComponent ConsoleHTTPPort="1813" SSLEnabled="false"/>
</IASInstance>
<PortalInstance DADLocation="/pls/portal" SchemaUsername="portal" SchemaPassword="@BR9LXXoXbvW1c5ZkK8t3KJJivRb0Uus9og==" ConnectString="cn=asdb,cn=oraclecontext">
<WebCacheDependency ContainerType="IASInstance" Name="ias904.dev.dev_domain.com"/>
<OIDDependency ContainerType="IASInstance" Name="ias904.dev.dev_domain.com"/>
<EMDependency ContainerType="IASInstance" Name="ias904.dev.dev_domain.com"/>
</PortalInstance>
</IASConfig>
It corresponds to a portal URL like this:
http://dev.dev_domain.com:7782/pls/portalThe script exp_portal_schema.sh copy the iasconfig.xml file in the exp_data directory.
C. Export the security: users and groups (optional)
If you use other Single Sing-On uses than the portal user, you probably need to restore the full security, the users and groups stored in OID on the production machine. 5 steps need to be executed for this operation:
Export the OID entries with LDAPSEARCH
Before to import, change the domain in the generated file (optional)
Before to import, remove the 'authpassword' attributes from the generated files
Import them with LDAPADD
Update the GUID/DN of the groups in portal tables
Part 1 - LDAPSEARCH
The typical commands to do this operation look like this:
ldapsearch -h $OID_HOSTNAME -p $OID_PORT -X -b "cn=portal.040127.1384,cn=groups,dc=dev_domain,dc=com" -s sub "objectclass=*" > portal_group.xml
ldapsearch -h $OID_HOSTNAME -p $OID_PORT -X -D "cn=orcladmin" -w $IAS_PASSWORD -b "cn=users,dc=dev_domain,dc=com" -s sub "objectclass=inetorgperson" > portal_users.xmlTake care about the following points
The groups are stored in a LDAP directory containing the date of installation
( in this example: portal.040127.1384,cn=groups,dc=dev_domain,dc=com )
If the domain of dev and prod is different, the exported files contains the name of the development domain in the form of 'dc=dev_domain,dc=com' in a lot of place. The domain name needs to be replaced by the production domain name everywhere in the files.
Ldapsearch uses the option '- X '. It it to export to DSML files (XML). It avoids a problem related with common LDAP files, LDIF files. LDIF files are wrapped at 78 characters. The wrapping to 78 characters make difficult to change the domain name contained in the LDIF files. XML files are not wrapped and do not have this problem.
A sample script to export the 2 XML files is given here in : step 3 - export the users and groups (optional) of the export script.
Part 2 : change the domain in the DSML files
If the domain of dev and prod is different, the exported files contains the name of the development domain in the form of 'dc=dev_domain,dc=com' in a lot of place. The domain name need to be replaced by the production domain name everywhere in the files.
To do this, we can use these commands:
cat exp_data/portal_groups.xml | sed -e "s/$DEV_DN/$PROD_DN/" > imp_log/portal_groups.xml
cat exp_data/portal_users.xml | sed -e "s/$DEV_DN/$PROD_DN/" > imp_log/temp_users.xml
Part 3 : Remove the authpassword attribute
The export of all attributes from the all users has also exported an automatically generated attribute in OID called 'authpassword'.
'authpassword' is a list automatically generated passwords for several types of application. But mostly, it can not be imported. Also, there is no option in ldapsearch (that I know) that allows removing an attribute. In place of giving to the ldapsearch command the list of all the attributes that is very long, without 'authpassword', we will remove the attribute after the export.
For that we will use the fact that the DSML files are XML files. There is a XSLT in the Oracle IAS, in the executable '$ORACLE_HOME/bin/xml'. XSLT is a standard specification of the internet consortium W3C to transform a XML file with the help of a XSL file.
Here is the XSL file to remove the authpassword tag.
del_autpassword.xsl
<!--
File : del_authpassword.xsl
Version : 1.0
Author : mgueury
Description:
Remove the authpassword from the DSML files
-->
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xml:output method="xml"/>
<xsl:template match="*|@*|node()">
<xsl:copy>
<xsl:apply-templates select="*|@*|node()"/>
</xsl:copy>
</xsl:template>
<xsl:template match="attr">
<xsl:choose>
<xsl:when test="@name='authpassword;oid'">
</xsl:when>
<xsl:when test="@name='authpassword;orclcommonpwd'">
</xsl:when>
<xsl:otherwise>
<xsl:copy>
<xsl:apply-templates select="*|@*|node()"/>
</xsl:copy>
</xsl:otherwise>
</xsl:choose>
</xsl:template>
</xsl:stylesheet>
And the command to make the transfomation:
xml -f -s del_authpassword.xsl -o imp_log/portal_users.xml imp_log/temp_users.xmlWhere :
imp_log/portal_users.xml is the final file without authpassword tags
imp_log/temp_users.xml is the input file with the authpassword tags that can not be imported.
Part 4 : LDAPADD
The typical commands to do this operation look like this:
ldapadd -h $OID_HOSTNAME -p $OID_PORT -D "cn=orcladmin" -w $IAS_PASSWORD -c -X portal_group.xml
ldapadd -h $OID_HOSTNAME -p $OID_PORT -D "cn=orcladmin" -w $IAS_PASSWORD -c -X portal_users.xmlTake care about the following points
Ldapadd uses the option ' -c '. Existing users/groups are generating an error. The option -c allows continuing and ignoring these errors. Whatever, the errors should be checked to see if it is just existing entries.
A sample script to import the 2 XML files given in the step 5 - import the users and groups (optional) of the import script.
Part 5 : Update the GUID/DN
In Portal 9.0.4, the update of the GUID is taken care by PTLCONFIG during the import. (Import step 7)
D. Example script for export
Here is a example script that combines the 3 steps.
Depending of you need, you will :
or execute all the steps
or just execute the 1rst one (export of the database users). It will be enough you just want to login with the portal user on the production instance.
if your portal repository resides in a database 9.2.0.5 or 10.1.0.2, please read this
you can download all the scripts here, Attachment 276688.1:1
Do not forget to modify the script to your need and mostly add the list of users like explained in point A above.
exp_portal_schema.sh
# BASH Script : exp_portal_schema.sh
# Version : 1.3
# Portal : 9.0.4.0
# History :
# mgueury - creation
# Description:
# This script export a portal dump file from a dev instance
# -------------------------- Environment variables --------------------------
. portal_env.sh
# In case you do not use portal_env.sh you have to define all the variables
# For exporting the dump file only.
# export SYS_PASSWORD=change_on_install
# export PORTAL_TNS=asdb
# For the security (optional)
# export IAS_PASSWORD=welcome1
# export PORTAL_USER=portal
# export PORTAL_PASSWORD=A1b2c3de
# export OID_HOSTNAME=development.domain.com
# export OID_PORT=3060
# export OID_DOMAIN_DN=dc=`echo $OID_HOSTNAME | cut -d '.' -f2,3,4,5,6 --output-delimiter=',dc='`
# ------------------------------ Help function -----------------------------------
function press_any_key() {
if [ $PRESS_ANY_KEY_AFTER_EACH_STEP = "Y" ]; then
echo
echo Press enter to continue
read $ANY_KEY
else
echo
fi
echo "------------------------------- Export ------------------------------------"
# create a directory for the export
mkdir exp_data
# copy the env variables in the log just in case
export > exp_data/exp_env_variable.txt
echo "--------------------- step 1 - export"
# export the portal users, but take care to add:
# - your users containing DB providers
# - your users containing data (tables)
exp userid="'sys/$SYS_PASSWORD@$PORTAL_TNS as sysdba'" file=exp_data/portal_exp.dmp grants=y log=exp_data/portal_exp.log owner=(portal,portal_app,portal_demo,portal_public)
press_any_key
echo "--------------------- step 2 - store iasconfig.xml file of the MIDTIER"
cp $MIDTIER_ORACLE_HOME/portal/conf/iasconfig.xml exp_data
press_any_key
echo "--------------------- step 3 - export the users and groups (optional)"
# Export the groups and users from OID in 2 XML files (not LDIF)
# The OID groups of portal are stored in GROUP_INSTALL_BASE that depends
# of the installation date.
# For the user, I use the default place. If it does not work,
# you can find the user place with:
# > exec dbms_output.put_line(wwsec_oid.get_user_search_base);
# Get the GROUP_INSTALL_BASE used in security export
sqlplus $PORTAL_USER/$PORTAL_PASSWORD@$PORTAL_TNS <<IASDB
set serveroutput on
spool exp_data/group_base.log
begin
dbms_output.put_line(wwsec_oid.get_group_install_base);
end;
IASDB
export GROUP_INSTALL_BASE=`grep cn= exp_data/group_base.log`
echo '--- Exporting Groups'
echo 'creating portal_groups.xml'
ldapsearch -h $OID_HOSTNAME -p $OID_PORT -X -s sub -b "$GROUP_INSTALL_BASE" -s sub "objectclass=*" > exp_data/portal_groups.xml
echo '--- Exporting Users'
echo 'creating portal_users.xml'
ldapsearch -h $OID_HOSTNAME -p $OID_PORT -D "cn=orcladmin" -w $IAS_PASSWORD -X -s sub -b "cn=users,$OID_DOMAIN_DN" -s sub "objectclass=inetorgperson" > exp_data/portal_users.xml
The script is done to run from the midtier.
Step 2 - Install IAS in a new machine (PROD)
A. Installation
This note does not distinguish if Portal is sharing the same database than Single-Sign On and OID. For simplicity, I will speak only about 1 database. But I could also create a second infrastructure database just for the portal repository. This way is better for production system, because the Portal repository is only product used in the 2nd database. Having 2 separate databases allows taking easily backup of the portal repository.
On the production machine, you need to install a fresh install of IAS 9.0.4. Take care to use :
the same IAS patchset 9.0.4.1, 9.0.4.2, ...on the middle-tier and infrastruture than in development
and same characterset than in development (or UTF8)
The result will be 2 ORACLE_HOMES and 1 infrastructure database:
the ORACLE_HOME of the infrastructure (SID:infra904)
the ORACLE_HOME of the midtier (SID:ias904)
an infrastructure database (SID:asdb)
The empty new Portal install should work fine before to go to the next step.
B. About tablespaces (optional)
The size of the tablespace of the production should match the one of the Developement machine. If not, the tablespace will autoextend. It is not really a concern, but it is slow. You should modify the tablespaces for to have as much space on prod and dev.
Also, it is safer to check that there is enough free space on the hard disk to import in the database.
To modify the tablespace size, you can use Oracle Entreprise Manager console,
On Unix, . oraenv
infra904oemapp dbastudio
On NT Start/ Programs/ Oracle Application server - infra904 / Enterprise Manager Console
Launch standalone
Choose the portal database (typically asdb.domain.com)
Connect with a DBA user, sys or system
Click Storage/Tablespaces
Change the size of the PORTAL, PORTAL_DOC, PORTAL_LOGS, PORTAL_IDX tablespaces
C. Backup
It could be a good idea to take a backup of the MIDTIER and INFRASTRUCTURE Oracle Homes at that point to allow retesting the import process if it fails for any reason as much as you want without needing to reinstall everything.
Step 3 - Import in production (on PROD)
The following script is a sample of an Unix script that combines all the steps to import a portal repository to the production machine.
To import a portal reporistory and his users and group in OID, you need to do 8 things:
Stop the midtier to avoid errors while dropping the portal schema
SQL*Plus with Portal
Drop the 4 default portal schemas
Create the portal users with the same passwords than the just deleted users and give them grants (you need to create your own custom shemas too if you have some).
Import the dump file
Import the users and groups into OID (optional)
SQL*Plus with SYS : Post import changes
Recompile everything in the database
Reassign the imported jobs to portal
SQL*Plus with Portal : Post import changes
Recreate the Portal intermedia indexes
Correct an import errror on wwsrc_preference$
Make additional post import changes, by updating some portal tables, and replacing the development hostname, port or domain by the production ones.
Rewire the portal repository with ptlconfig -dad portal
Restart the midtier
Here is a sample script to do this on Unix. You will need to adapt the script to your needs.
imp_portal_schema.sh
# BASH Script : imp_portal_schema.sh
# Version : 1.3
# Portal : 9.0.4.0
# History :
# mgueury - creation
# Description:
# This script import a portal dump file and relink it with an
# infrastructure.
# Script to be started from the MIDTIER
# -------------------------- Environment variables --------------------------
. portal_env.sh
# Development and Production machine hostname and port
# Example
# .._HOSTNAME machine.domain.com (name of the MIDTIER)
# .._PORT 7782 (http port of the MIDTIER)
# .._DN dc=domain,dc=com (domain name in a LDAP way)
# These values can be determined automatically with the iasconfig.xml file of dev
# and prod. But if you do not know or remember the dev hostname and port, this
# query should find it.
# > select name, http_url from wwpro_providers$ where http_url like 'http%'
# These variables are used in the
# > step 4 - security / import OID users and groups
# > step 6 - post import changes (PORTAL)
# Set the env variables of the DEV instance
rm /tmp/iasconfig_env.sh
xml -f -s xsl/portal_env_unix.xsl -o /tmp/iasconfig_env.sh exp_data/iasconfig.xml
. /tmp/iasconfig_env.sh
export DEV_HOSTNAME=$WEBCACHE_HOSTNAME
export DEV_PORT=$WEBCACHE_LISTEN_PORT
export DEV_DN=dc=`echo $OID_HOSTNAME | cut -d '.' -f2,3,4,5,6 --output-delimiter=',dc='`
# Set the env variables of the PROD instance
. portal_env.sh
export PROD_HOSTNAME=$WEBCACHE_HOSTNAME
export PROD_PORT=$WEBCACHE_LISTEN_PORT
export PROD_DN=dc=`echo $OID_HOSTNAME | cut -d '.' -f2,3,4,5,6 --output-delimiter=',dc='`
# ------------------------------ Help function -----------------------------------
function press_any_key() {
if [ $PRESS_ANY_KEY_AFTER_EACH_STEP = "Y" ]; then
echo
echo Press enter to continue
read $ANY_KEY
else
echo
fi
echo "------------------------------- Import ------------------------------------"
# create a directory for the logs
mkdir imp_log
# copy the env variables in the log just in case
export > imp_log/imp_env_variable.txt
echo "--------------------- step 1 - stop the midtier"
# This step is needed to avoid most case of ORA-01940: user connected
# when dropping the portal user
$MIDTIER_ORACLE_HOME/opmn/bin/opmnctl stopall
press_any_key
echo "--------------------- step 2 - drop and create empty users"
sqlplus "sys/$SYS_PASSWORD@$PORTAL_TNS as sysdba" <<IASDB
spool imp_log/drop_create_user.log
---- Drop users
-- Warning: You need to stop all SQL*Plus connection to the
-- portal schema before that else the drop will give an
-- ORA-01940: cannot drop a user that is currently connected
drop user portal_public cascade;
drop user portal_app cascade;
drop user portal_demo cascade;
drop user portal cascade;
---- Recreate the users and give them grants"
-- The new users will have the same passwords as the users we just dropped
-- above. Do not forget to add your exported custom users
create user portal identified by $PORTAL_PASSWORD default tablespace portal;
grant connect,resource,dba to portal;
create user portal_app identified by $PORTAL_APP_PASSWORD default tablespace portal;
grant connect,resource to portal_app;
create user portal_demo identified by $PORTAL_DEMO_PASSWORD default tablespace portal;
grant connect,resource to portal_demo;
create user portal_public identified by $PORTAL_PUBLIC_PASSWORD default tablespace portal;
grant connect,resource to portal_public;
alter user portal_public grant connect through portal;
start $MIDTIER_ORACLE_HOME/portal/admin/plsql/wwv/wdbigra.sql portal
exit
IASDB
press_any_key
echo "--------------------- step 3 - import"
imp userid="'sys/$SYS_PASSWORD@$PORTAL_TNS as sysdba'" file=exp_data/portal_exp.dmp grants=y log=imp_log/import.log full=y
press_any_key
echo "--------------------- step 4 - import the OID users and groups (optional)"
# Some errors will be raised when running the ldapadd because at least the
# default entries will not be able to be inserted. Remove them from the
# ldif file if you want to avoid them. Due to the flag '-c', ldapadd ignores
# duplicate entries. Another more radical solution is to erase all the entries
# of the users and groups in OID before to run the import.
# Replace the domain name in the XML files.
cat exp_data/portal_groups.xml | sed -e "s/$DEV_DN/$PROD_DN/" > imp_log/portal_groups.xml
cat exp_data/portal_users.xml | sed -e "s/$DEV_DN/$PROD_DN/" > imp_log/temp_users.xml
# Remove the authpassword attributes with a XSL stylesheet
xml -f -s xsl/del_authpassword.xsl -o imp_log/portal_users.xml imp_log/temp_users.xml
echo '--- Importing Groups'
ldapadd -h $OID_HOSTNAME -p $OID_PORT -D "cn=orcladmin" -w $IAS_PASSWORD -c -X imp_log/portal_groups.xml -v
echo '--- Importing Users'
ldapadd -h $OID_HOSTNAME -p $OID_PORT -D "cn=orcladmin" -w $IAS_PASSWORD -c -X imp_log/portal_users.xml -v
press_any_key
echo "--------------------- step 5 - post import changes (SYS)"
sqlplus "sys/$SYS_PASSWORD@$PORTAL_TNS as sysdba" <<IASDB
spool imp_log/sys_post_changes.log
---- Recompile the invalid packages"
-- On the midtier, the script utlrp is not present. This step
-- uses a copy of it stored in patch/utlrp.sql
select count(*) INVALID_OBJECT_BEFORE from all_objects where status='INVALID';
start patch/utlrp.sql
set lines 999
select count(*) INVALID_OBJECT_AFTER from all_objects where status='INVALID';
---- Jobs
-- Reassign the JOBS imported to PORTAL. After the import, they belong
-- incorrectly to the user SYS.
update dba_jobs set LOG_USER='PORTAL', PRIV_USER='PORTAL' where schema_user='PORTAL';
commit;
exit
IASDB
press_any_key
echo "--------------------- step 6 - post import changes (PORTAL)"
sqlplus $PORTAL_USER/$PORTAL_PASSWORD@$PORTAL_TNS <<IASDB
set serveroutput on
spool imp_log/portal_post_changes.log
---- Intermedia
-- Recreate the portal indexes.
-- inctxgrn.sql is missing from the 9040 CD-ROMS. This is the bug 3536937.
-- Fixed in 9041. The missing script is contained in the downloadable zip file.
start patch/inctxgrn.sql
start $MIDTIER_ORACLE_HOME/portal/admin/plsql/wws/ctxcrind.sql
---- Import error
alter table "WWSRC_PREFERENCE$" add constraint wwsrc_preference_pk
primary key (subscriber_id, id)
using index wwsrc_preference_idx1
begin
DBMS_RLS.ADD_POLICY ('', 'WWSRC_PREFERENCE$', 'WEBDB_VPD_POLICY',
'', 'webdb_vpd_sec', 'select, insert, update, delete', TRUE,
static_policy=>true);
end ;
---- Modify tables with full URLs
-- If the domain name of prod and dev are different, this step is really important.
-- It modifies the portal tables that contains reference to the hostname or port
-- of the development machine. (For more explanation: see Addional steps in the note)
-- groups (dn)
update wwsec_group$
set dn=replace( dn, '$DEV_DN', '$PROD_DN' )
update wwsec_group$
set dn_hash = wwsec_api_private.get_dn_hash( dn )
-- users (dn)
update wwsec_person$
set dn=replace( dn, '$DEV_DN', '$PROD_DN' )
update wwsec_person$
set dn_hash = wwsec_api_private.get_dn_hash( dn)
-- subscriber
update wwsub_model$
set dn=replace( dn, '$DEV_DN', '$PROD_DN' ), GUID=':1'
where dn like '%$DEV_DN%'
-- preferences
update wwpre_value$
set varchar2_value=replace( varchar2_value, '$DEV_DN', '$PROD_DN' )
where varchar2_value like '%$DEV_DN%'
update wwpre_value$
set varchar2_value=replace( varchar2_value, '$DEV_HOSTNAME:$DEV_PORT', '$PROD_HOSTNAME:$PROD_PORT' )
where varchar2_value like '%$DEV_HOSTNAME:$DEV_PORT%'
-- page url items
update wwv_things
set title_link=replace( title_link, '$DEV_HOSTNAME:$DEV_PORT', '$PROD_HOSTNAME:$PROD_PORT' )
where title_link like '%$DEV_HOSTNAME:$DEV_PORT%'
-- web providers
update wwpro_providers$
set http_url=replace( http_url, '$DEV_HOSTNAME:$DEV_PORT', '$PROD_HOSTNAME:$PROD_PORT' )
where http_url like '%$DEV_HOSTNAME:$DEV_PORT%'
-- html links created by the RTF editor inside text items
update wwv_text
set text=replace( text, '$DEV_HOSTNAME:$DEV_PORT', '$PROD_HOSTNAME:$PROD_PORT' )
where text like '%$DEV_HOSTNAME:$DEV_PORT%'
-- Portlet metadata nls: help URL
update wwpro_portlet_metadata_nls$
set help_url=replace( help_url, '$DEV_HOSTNAME:$DEV_PORT', '$PROD_HOSTNAME:$PROD_PORT' )
where help_url like '%$DEV_HOSTNAME:$DEV_PORT%'
-- URL items (There is a trigger on this table building absolute_url automatically)
update wwsbr_url$
set absolute_url=replace( absolute_url, '$DEV_HOSTNAME:$DEV_PORT', '$PROD_HOSTNAME:$PROD_PORT' )
where absolute_url like '%$DEV_HOSTNAME:$DEV_PORT%'
-- Things attributes
update wwv_thingattributes
set value=replace( value, '$DEV_HOSTNAME:$DEV_PORT', '$PROD_HOSTNAME:$PROD_PORT' )
where value like '%$DEV_HOSTNAME:$DEV_PORT%'
commit;
exit
IASDB
press_any_key
echo "--------------------- step 7 - ptlconfig"
# Configure portal such that portal uses the infrastructure database
cd $MIDTIER_ORACLE_HOME/portal/conf/
./ptlconfig -dad portal
cd -
mv $MIDTIER_ORACLE_HOME/portal/logs/ptlconfig.log imp_log
press_any_key
echo "--------------------- step 8 - restart the midtier"
$MIDTIER_ORACLE_HOME/opmn/bin/opmnctl startall
date
Each step can generate his own errors due to a lot of factors. It is better to run the import step by step the first time.
Do not forget to check the output of log files created during the various steps of the import:
imp_log/drop_create_user.log
Spool when dropping and recreating the portal users
imp_log/import.log Import log file when importing the portal_exp.dmp file
imp_log/sys_post_changes.log
Spool when making post changes with SYS
imp_log/portal_post_changes.log
Spool when making post changes with PORTAL
imp_log/ptlconfig.log
Log file of ptconfig when rewiring the midtier
Step 4 - Test
A. Check the log files
B. Test the website and see if it works fine.
Step 5 - take a backup
Take a backup of all ORACLE_HOME and DATABASES to prevent all hardware problems. You need to copy:
All the files of the 2 ORACLE_HOME
And all the database files.
Step 6 - Additional steps
Here are some additional steps.
SSO external application ( that are part of the orasso schema and not imported yet )
Page URL items ( they seems to store the full URL ) - included in imp_portal_schema.sh
Web Providers ( the URL needs to be changed ) - included in imp_portal_schema.sh
Text items edited with the RTF editor in IE and containing links - included in imp_portal_schema.sh
Most of them are taken care by the "step 8 - post import changes". Except the first one.
1. SSO import
This script imports only Portal and the users/groups of OID. Not the list of the external application contained in the orasso user.
In Portal 9.0.4, there is a script called SSOMIG that resides in $INFRA_ORACLE_HOME/sso/bin and allows to move :
Definitions and user data for external applications
Registration URLs and tokens for partner applications
Connection information used by OracleAS Discoverer to access various data sources
See:
Oracle® Application Server Single Sign-On Administrator's Guide 10g (9.0.4) Part Number B10851-01
14. Exporting and Importing Data
2. Page items: the page URL items store the full URL.
This is Bug 2661805 fixed in Portal 9.0.2.6.
This following work-around is implemented in post import step of imp_portal_schema.sh
-- page url items
update wwv_things
set title_link=replace( title_link, 'dev.dev_domain.com:7778', 'prod.prod_domain.com:7778' )
where title_link like '%$DEV_HOSTNAME:$DEV_PORT%'
2. Web Providers
The URL to the Web providers needs also change. Like for the Page items, they contain the full path of the webserver.
Or you can get the list of the URLs to change with this query
select name, http_url from PORTAL.WWPRO_PROVIDERS$ where http_url like '%';
This following work-around is implemented in post import step of imp_portal_schema.sh
-- web providers
update wwpro_providers$
set http_url=replace( http_url, 'dev.dev_domain.com:7778', 'prod.prod_domain.com:7778' )
where http_url like '%$DEV_HOSTNAME:$DEV_PORT%'
4. The production and development machine do not share the same domain
If the domain of the production and the development are not the same, the DN (name in LDAP) of all users needs to change.
Let's say from
dc=dev_domain,dc=com -> dc=prod_domain,dc=com
1. before to upload the ldif files. All the strings in the 2 ldifs files that contain 'dc=dev_domain,dc=com', have to be replaced by 'dc=prod_domain,dc=com'
2. in the wwsec_group$ and wwsec_person$ tables in portal, the DN need to change too.
This following work-around is implemented in post import step of imp_portal_schema.sh
-- groups (dn)
update wwsec_group$
set dn=replace( dn, 'dc=dev_domain,dc=com', 'dc=prod_domain,dc=com' )
update wwsec_group$
set dn_hash = wwsec_api_private.get_dn_hash( dn )
-- users (dn)
update wwsec_person$
set dn=replace( dn, 'dc=dev_domain,dc=com', 'dc=prod_domain,dc=com' )
update wwsec_person$
set dn_hash = wwsec_api_private.get_dn_hash( dn)
5. Text items with HTML links
Sometimes people stores full URL inside their text items, it happens mostly when they use link with the RichText Editor in IE .
This following work-around is implemented in post import step in imp_portal_schema.sh
-- html links created by the RTF editor inside text items
update wwv_text
set text=replace( text, 'dev.dev_domain.com:7778', 'prod.prod_domain.com:7778' )
where text like '%$DEV_HOSTNAME:$DEV_PORT%'
6. OID Custom password policy
It happens quite often that the people change the password policy of the OID server. The reason is that with the default policy, the password expires after 60 days. If so, do not forget to make the same changes in the new installation.
PROBLEMS
1. Import log has some errors
A. EXP-00091 -Exporting questionable statistics
You can ignore this error.
B. IMP-00017 - WWSRC_PREFERENCE$
When importing, there is one import error:
IMP-00017: following statement failed with ORACLE error 921:
"ALTER TABLE "WWSRC_PREFERENCE$" ADD "
IMP-00003: ORACLE error 921 encountered
ORA-00921: unexpected end of SQL commandThe primary key is not created. You can create it with this commmand
in SQL*Plus with the user portal.. Then readd the missing VPD policy.
alter table "WWSRC_PREFERENCE$" add constraint wwsrc_preference_pk
primary key (subscriber_id, id)
using index wwsrc_preference_idx1
begin
DBMS_RLS.ADD_POLICY ('', 'WWSRC_PREFERENCE$', 'WEBDB_VPD_POLICY',
'', 'webdb_vpd_sec', 'select, insert, update, delete', TRUE,
static_policy=>true);
end ;
Step 8 in the script "imp_portal_schema.sh" take care of this. This can also possibly be solved by the
C. IMP-00017 - WWDAV$ASL
. importing table "WWDAV$ASL"
Note: table contains ROWID column, values may be obsolete 113 rows importedThis error is normal, the table really contains a ROWID column.
D. IMP-00041 - Warning: object created with compilation warnings
This error is normal too. The packages giving these error have
dependencies on package not yet imported. A recompilation is done
after the import.
E. ldapadd error 'cannot add add entries containing authpasswords'
# ldap_add: DSA is unwilling to perform
# ldap_add: additional info: You cannot add entries containing authpasswords.
"authpasswords" are automatically generated values from the real password of the user stored in userpassword. These values do not have to be exported from ldap.
In the import script, I remove the additional tag with a XSL stylesheet 'del_authpassword.xsl'. See above.
F. IMP-00017: WWSTO_SESSION$
IMP-00017: following statement failed with ORACLE error 2298:
"ALTER TABLE "WWSTO_SESSION$" ENABLE CONSTRAINT "WWSTO_SESS_FK1""
IMP-00003: ORACLE error 2298 encountered
ORA-02298: cannot validate (PORTAL.WWSTO_SESS_FK1) - parent keys not found
Here is a work-around for the problem. I will normally integrate it in a next version of the scripts.
SQL> delete from WWSTO_SESSION_DATA$;
7690 rows deleted.
SQL> delete from WWSTO_SESSION$;
1073 rows deleted.
SQL> commit;
Commit complete.
SQL> ALTER TABLE "WWSTO_SESSION$" ENABLE CONSTRAINT "WWSTO_SESS_FK1";
Table altered.
G. IMP-00017 - ORACLE error 1 - DBMS_JOB.ISUBMIT
This error can appear during the import when the import database is not empty and is already customized for some reasons. For example, you export from an infrastructure and you import in a database with a lot of other programs that uses jobs. And unhappily the same job id.
Due to the way the export/import of jobs is done, the jobs keeps their id after the import. And they may conflict.
IMP-00017: following statement failed with ORACLE error 1: "BEGIN DBMS_JOB.ISUBMIT(JOB=>42,WHAT=>'begin execute immediate " "''begin wwutl_cache_sys.process_background_inval; end;'' ; exc" "eption when others then wwlog_api.log(p_domain=> ''utl'', " " p_subdomain=>''cache'', p_name=>''background'', " " p_action=>''process_background_inval'', p_information => ''E" "rror in process_background_inval ''|| sqlerrm);end;', NEXT_DATE=" ">TO_DATE('2004-08-19:17:32:16','YYYY-MM-DD:HH24:MI:SS'),INTERVAL=>'SYSDATE " "+ 60/(24*60)',NO_PARSE=>TRUE); END;"
IMP-00003: ORACLE error 1 encountered ORA-00001: unique constraint (SYS.I_JOB_JOB) violated
ORA-06512: at "SYS.DBMS_JOB", line 97 ORA-06512: at line 1
Solutions:
1. use a fresh installed database,
2. Due that the jobs conflicting are different because it happens only in custom installation, there is no clear rule. But you can
recreate the jobs lost after the import with other_ids
and/or change the job id of the other program before to import. This type of commands can help you (you need to do it with SYS)
select * from dba_jobs;
update dba_jobs set job=99 where job=52;
commit
2. Import in a RAC environment
Be aware of the Bug 2479882 when the portal database is in a RAC database.
Bug 2479882 : NEEDED TO BOUNCE DB NODES AFTER INSTALLING PORTAL 9.0.2 IN RAC NODE3. Intermedia
After importing a environment, the intermedia indexes are invalid. To correct the error you need to run in SQL*Plus with Portal
start $MIDTIER_ORACLE_HOME/portal/admin/plsql/wws/inctxgrn.sql
start $MIDTIER_ORACLE_HOME/portal/admin/plsql/wws/ctxcrind.sql
But $MIDTIER_ORACLE_HOME/portal/admin/plsql/wws/inctxgrn.sql is missing in IAS 9.0.4.0. This is Bug 3536937. Fixed in 9041. The missing scripts are contained in the downloadable zip file (exp_schema904.zip : Attachment 276688.1:1 ), directory sql. This means that practically in 9040, you have to run
start sql/inctxgrn.sql
start $MIDTIER_ORACLE_HOME/portal/admin/plsql/wws/ctxcrind.sql
In the import script, it is done in the step 6 - recreate Portal Intermedia indexes.
You can not WA the problem without the scripts. Running ctxcrind.sql alone does not work. You will have this error:
ORA-06510: PL/SQL: unhandled user-defined exception
ORA-06512: at "PORTAL.WWERR_API_EXCEPTION", line 164
ORA-06512: at "PORTAL.WWV_CONTEXT", line 1035
ORA-06510: PL/SQL: unhandled user-defined exception
ORA-06512: at "PORTAL.WWERR_API_EXCEPTION", line 164
ORA-06512: at "PORTAL.WWV_CONTEXT", line 476
ORA-06510: PL/SQL: unhandled user-defined exception
ORA-20000: Oracle Text error:
DRG-12603: CTXSYS does not own user datastore procedure: WWSBR_THING_CTX_69
ORA-06512: at line 13
4. ptlconfig
If you try to run ptlconfig simply after an import you will get an error:
Problem processing Portal instance: Configuring HTTP server settings : Installing cache data : SQL exception: ERROR: ORA-23421: job number 32 is not a job in the job queue
This is because the import done by user SYS has imported the PORTAL jobs to the SYS schema in place of portal. The solution is to run
update dba_jobs set LOG_USER='PORTAL', PRIV_USER='PORTAL' where schema_user='PORTAL';
In the import script, it is done in the step 8 - post import changes.
5. WWC-41417 - invalid credentials.
When you try to login you get:
Unexpected error encountered in wwsec_app_priv.process_signon (User-Defined Exception) (WWC-41417)
An exception was raised when accessing the Oracle Internet Directory: 49: Invalid credentials
Details
Error:Operation: dbms_ldap.simple_bind_s
OID host: machine.domain.com
OID port number: 4032
Entry DN: orclApplicationCommonName=PORTAL,cn=Portal,cn=Products,cn=OracleContext. (WWC-41743)Solution:
- run secupoid.sql
- rerun ptlconfig
This problem has been seen after using ptlasst in place of ptlconfig.
6. EXP-003 with a database 9.2.0.5 or 10.1.0.2
In fact, the DB format of imp/exp has changed in 9.2.0.5 or 10.1.0.2. The EXP-3 error only occurs when the export from the 9.2.0.5.0 or 10.1.0.2.0 database is done with a lower release export utility, e.g. 9.2.0.4.0.
Due to the way this note is written, the imp/exp utility used is the one of the midtier (9014), if your portal resides in a 9.2.0.5 database, it will not work. To work-around the problem, there are 2 solutions:
Change the script so that it uses the exp and imp command of database.
Make a change to the 9.2.0.5 or 10.1.0.2 database to make them compatible with previous version. The change is to modify a database internal view before to export/import the data.
A work-around is given in Bug 3784697
1. Make a note of the export definition of exu9tne from
$OH/rdbms/admin/catexp.sql
2. Copy this to a new file and add "UNION ALL select * from sys.exu9tneb" to the end of the definition
3. Run this as sys against the DB to be exported.
4. Export as required
5. Put back the original definition of exu9tne
eg: For 9204 the workaround view would be:
CREATE OR REPLACE VIEW exu9tne (
tsno, fileno, blockno, length) AS
SELECT ts#, segfile#, segblock#, length
FROM sys.uet$
WHERE ext# = 1
UNION ALL
select * from sys.exu9tneb
7. EXP-00006: INTERNAL INCONSISTENCY ERROR
This is Bug 2906613.
The work-around given in this bug is the following:
- create the following view, connected as sys, before running export:
CREATE OR REPLACE VIEW exu8con (
objid, owner, ownerid, tname, type, cname,
cno, condition, condlength, enabled, defer,
sqlver, iname) AS
SELECT o.obj#, u.name, c.owner#, o.name,
decode(cd.type#, 11, 7, cd.type#),
c.name, c.con#, cd.condition, cd.condlength,
NVL(cd.enabled, 0), NVL(cd.defer, 0),
sv.sql_version, NVL(oi.name, '')
FROM sys.obj$ o, sys.user$ u, sys.con$ c,
sys.cdef$ cd, sys.exu816sqv sv, sys.obj$ oi
WHERE u.user# = c.owner# AND
o.obj# = cd.obj# AND
cd.con# = c.con# AND
cd.spare1 = sv.version# (+) AND
cd.enabled = oi.obj# (+) AND
NOT EXISTS (
SELECT owner, name
FROM sys.noexp$ ne
WHERE ne.owner = u.name AND
ne.name = o.name AND
ne.obj_type = 2)
The modification of exu8con simply adds support for a constraint type that had not previously been supported by this view. There is no negative impact.
8. WWSBR_DOC_CTX_54 is invalid
After the recompilation of the package, one package remains invalid (in sys_post_changes.log):
INVALID_OBJECT_AFTER
1
select owner, object_name from all_objects where status='INVALID'
CTXSYS WWSBR_DOC_CTX_54
CREATE OR REPLACE procedure WWSBR_DOC_CTX_54
(rid in rowid, bilob in out NOCOPY blob)
is begin PORTAL.WWSBR_CTX_PROCS.DOC_CTX(rid,bilob);end;
This object is not used anymore by portal. The error can be ignored. The procedure can be removed too. This is Bug 3559731.
9. You do not have permission to perform this operation. (WWC-44131)
It seems that there are problems if
- groups on the production machine are not residing in the default place in OID,
- and that the group creation base and group search base where changed.
After this, the cloning of the repository work without problem. But it seems that the command 'ptlconfig -dad portal' does not reset the GUID and DN of the groups correctly. I have not checked this yet.
The solution seems to use the script given in the 9.0.2 Note 228516.1. And run group_sec.sql to reset all the DN and GUID in the copied instance.
10. Invalid Java objects when exporting from a 9.x database and importing in a 10g database
If you export from a 9.x database and import in a 10g database, after running utlrp.sql, 18 Java objects will be invalid.
select object_name, object_type from user_objects where status='INVALID'
SQL> /
OBJECT_NAME OBJECT_TYPE
/556ab159_Handler JAVA CLASS
/41bf3951_HttpsURLConnection JAVA CLASS
/ce2fa28e_ProviderManagerClien JAVA CLASS
/c5b98d35_ServiceManagerClient JAVA CLASS
/d77cf2ab_SOAPServlet JAVA CLASS
/649bf254_JavaProvider JAVA CLASS
/a9164b8b_SpProvider JAVA CLASS
/2ee43ac9_StatefulEJBProvider JAVA CLASS
/ad45acec_StatelessEJBProvider JAVA CLASS
/da1c4a59_EntityEJBProvider JAVA CLASS
/66fdac3e_OracleSOAPHTTPConnec JAVA CLASS
/939c36f5_OracleSOAPHTTPConnec JAVA CLASS
org/apache/soap/rpc/Call JAVA CLASS
org/apache/soap/rpc/RPCMessage JAVA CLASS
org/apache/soap/rpc/Response JAVA CLASS
/198a7089_Message JAVA CLASS
/2cffd799_ProviderGroupUtils JAVA CLASS
/32ebb779_ProviderGroupMgrProx JAVA CLASS
18 rows selected.
This is a known issue. This can be solved by applying patch one of the following patch depending of your IAS version.
Bug 3405173 - PORTAL 9.0.4.0.0 PATCH FOR 10G DB UPGRADE (FROM 9.0.X AND 9.2.X)
Bug 4100409 - PORTAL 9.0.4.1.0 PATCH FOR 10G DB UPGRADE (FROM 9.0.X AND 9.2.X)
Bug 4100417 - PORTAL 9.0.4.2.0 PATCH FOR 10G DB UPGRADE (FROM 9.0.X AND 9.2.X)
11. Import : IMP-00003: ORACLE error 30510 encountered
When importing Portal 9.0.4.x, it could be that the import of the database side produces an error ORA-30510.The new perl script work-around the issue in the portal_post_import.sql script. But not the BASH scripts. If you use the BASH scripts, after the import, please run this command manually in SQL*Plus logged as portal.
---- Import error 2 - ORA-30510 when importing
CREATE OR REPLACE TRIGGER logoff_trigger
before logoff on schema
begin
-- Call wwsec_oid.unbind to close open OID connections if any.
wwsec_oid.unbind;
exception
when others then
-- Ignore all the errors encountered while unbinding.
null;
end logoff_trigger;
This is logged as <Bug;4458413>.
12. Exporting from a 9.0.1 database and import in a 9.2.0.5+ or 10g DB
It could be that when exporting from a 9.0.1 database to a 10g database that the java classes do not get compiled correctly. The following errors are seen
ORA-29534: referenced object PORTAL.oracle/net/www/proto/https/HttpsURLConnection could not be resolved
errors:: class oracle/net/www/proto/https/HttpsURLConnection
ORA-29521: referenced name oracle/security/ssl/OracleSSLSocketFactoryImpl could not be found
ORA-29521: referenced name oracle/security/ssl/OracleSSLSocketFactory could not be found
In such a case, please apply the following patches after the import in the 10g database.
Bug 3405173 PORTAL REPOS DB UPGRADE TO 10G: for Portal 9.0.4.0
Bug 4100409 PORTAL REPOS DB UPGRADE TO 10G: for Portal 9.0.4.1
Main Differences with Portal 9.0.2
For the persons used to this technics in Portal 9.0.2, you could be interested to read the main differences with the same note for Portal 9.0.2
Portal 9.0.2
Portal 9.0.4
Cutter database
Portal 9.0.2 can be part of an infrastructure database or in a custom external database.
In Portal 9.0.2, the portal schema is imported in an empty database.
Portal 9.0.4 can only be installed in a 'Cutter database', a database created with RepCA or OUI containing always OID, DCM and so on...
In Portal 9.0.4, the portal schema is imported in an 'Cutter database' (new)
group_sec.sql
group_sec.sql is used to correct the GUIDs of OID stored in Portal
ptlconfig -dad portal -oid is used to correct the GUIDs of OID stored in Portal (new)
1 script
The import / export are divided by several steps with several scripts
The import script is done in one step
Additional steps are included in the script
This requires to know the hostname and port of the original development machine. (new)
Import
The steps are:
creation of an empty database
creation of the users with password=username
import
The steps are:
creation of an IAS 10g infrastructure DB (repca or OUI)
deletion of new portal schemas (new)
creation of the users with the same password than the schemas just dropped.
import
DAD
The dad needed to be changed
The passwords are not changed, the dad does not need to be changed.
Bugs
In portal 9.0.2, 2 bugs were workarounded by change_host.sh
In Portal 9.0.4, some tables additional tables needs to be updated manually before to run ptlasst. This is #Bug:3762961#.
export of LDAP
The export is done in LDIF files. If the prod and the dev have different domain, it is quite difficult to change the domain name in these file due to the line wrapping at 78 characters.
The export is done in XML files, in the DSML format (new). It is a lot easier to change the XML files if the domain name is different from PROD to DEV.
Download
You have to cut and paste the scripts
The scripts are attached to the note. Just donwload them.
Rewiring
9.0.2 uses ptlasst.
ptlasst.csh -mode MIDTIER -i custom -s $PORTAL_USER -sp $PORTAL_PASSWORD -c $PORTAL_HOSTNAME:$PORTAL_DB_PORT:$PORTAL_SERVICE_NAME -sdad $PORTAL_DAD -o orasso -op $ORASSO_PASSWORD -odad orasso -host $MIDTIER_HOSTNAME -port $MIDTIER_HTTP_PORT -ldap_h $INFRA_HOSTNAME -ldap_p $OID_PORT -ldap_w $IAS_PASSWORD -pwd $IAS_PASSWORD -sso_c $INFRA_HOSTNAME:$INFRA_DB_PORT:$INFRA_SERVICE_NAME -sso_h $INFRA_HOSTNAME -sso_p $INFRA_HTTP_PORT -ultrasearch -oh $MIDTIER_ORACLE_HOME -mc false -mi true -chost $MIDTIER_HOSTNAME -cport_i $WEBCACHE_INV_PORT -cport_a $WEBCACHE_ADM_PORT -wc_i_pwd $IAS_PASSWORD -emhost $INFRA_HOSTNAME -emport $EM_PORT -pa orasso_pa -pap $ORASSO_PA_PASSWORD -ps orasso_ps -pp $ORASSO_PS_PASSWORD -iasname $IAS_NAME -verbose -portal_only
9.0.4 uses ptlconfig (new)
ptlconfig -dad portal
Environment variables
A lot of environment variables are needed
Just 3 environment variables are needed:
- password of SYS
- password of IAS,
- ORACLE_HOME of the Midtier
All the rest is found in iasconfig.xml and LDAP (new)
TO DO
- Check if the orclcommonapplication name fits SID.hostname
- Check what gives the import of a portal30 upgraded schema inside a schema named portal
- Explain how to copy the portal*.dbf files in place of export/import and the limitation of tra -
I had my music on my itunes on my old computer (pc), and need to move it to my husband's computer. My husband and I both have iphones and want to keep using our seperate itunes accounts on one computer, as we both have our own media set up on our accounts. I had burned my music from the old computer onto discs and imported onto the new one...works in the library but I can't put them into playlists, which means I can't put the music on my iphone. As for using two seperate accounts on one computer, it was suggested to me to make another profile on windows (vista), and use the second account on that profile. I did that and have had such a frustrating time trying to get this to work. I don't know if I've done something wrong, but it's just headache after headache. Somehow my apps even ended up on my husband's account? Also, how can we share music between our profiles? It seems ridiculous that we should have to buy an album twice just because we have to different accounts. I would be willing to create a third joint account with my husband, but only if we can still have our own music, apps, etc, and can somehow transfer the music we have to this new account...if possible. Suggestions please???? I'm so close to pulling out my hair over this!!!
You'll need to copy the music currently on your iPod to your new PC and into iTunes first before you can sync it to the new iPod.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
B-rock -
My daughter has an iPod touch using my apple ID, I just purchased an iPhone with the same ID. Is there a way to keep my stuff seperate from her ipod but still share the iTunes account? I was looking through the photo section on my iPhone and found pics my daughter has taken from her iPod. I do not want my pics, emails, etc to show up on her iPod. Is there a way to stop this from happening or do I have to create a different Apple ID for her to use instead?
If you have iOS 8 on all devices then:
If under 13 years create a new ID for her by:
Family Sharing and Apple IDs for kids - Apple Support
The use family sharing to share apps
http://www.apple.com/ios/ios8/family-sharing/
Family purchases and payments - Apple Support
If underage and not i)S on all devices then you have to create an ID for here under your name and supervise it use:
Create a NEW account using these instructions so yo do not have to use a credit card.
Make sure you follow the instructions. Many do not and if you do not you will not get the None option. You must use an email address that you have not used with Apple before. Make sure you specify a birthdate that results in being at least 13 years old
Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card
More details of how:
http://ipadhelp.com/ipad-help-tips-tricks/how-to-get-free-apps-from-the-app-stor e-without-a-credit-card/
Use the new ID on her iPod but only for:
Settings>Messages>Send and Receive
Settings>FaceTime
Settings>GameCenter
and Settings>iCloud if you want her to have separate Contacts Calendar and some other things.
Continue to use the same/common Apple ID for Settings>iTunes and App stores so you can share purchases.
Maybe you are looking for
-
How have multiple users create a song together each adding their own track
I want to make a community get well song for a friend - Is it possible to make a track in Garage band and send it around to others to add their voices to in Garage Band? can you drop I tunes files into garage band?
-
Cannot use webcam on my Satellite A300
Hi there I have installed Windows 7 home premium in my laptop (it had windows Vista) and ever since I can't use my webcam. It doesn't appear in device manager and I have install and uninstall many times the drivers but every time I see the message th
-
Hi. I keep getting this error message when I open ical. "The server responded with an error. The request for account "btinternet.com" failed. The server responded with "502" to operation CalDAVAccountRefreshQueueableOperation" This is accompanied wit
-
Logic with a Saphire focusrite or Liquid Mix?
Anyone using logic with the focusrite Liquid Mix or saffire? If so can you guys post some a and b mp3 demos cheers
-
Possible to uninstall Flash Player for specific browser with Uninstaller program?
Greetings, I'm using a domain login script to deploy Flash Player across 400 or so PCs. Currently the script is set up to run the Flash Player Uninstaller executable prior to running the IE Flash Player Installer executable. The problem with this is