How to keep a FLA in an older format?

I've got Flash CS6 now in all its glory, but I work on shared files with other people who are still using 5.0 and 5.5 and aren't going to upgrade. So I need to "Save As..." to version 5.0 every single time I save (or at least remember to do it before checking a file in to svn).
Is there some way to permanently mark a file as that version so I can use the Ctrl+S hotkey again? Or to tell Flash CS6 to always save in CS5.0 format?

You aren't alone... the folks with 5.5 should be having the same problem as you - it's those 5.0 folks that are the real problem.  In my case, I just got into the habit of doing Save As since all my work with any newer version has been directed to someone with an older version.
You could always offer up a suggestion to the Adobe Development team...
Adobe - Wishlist & Bug Report
http://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

Similar Messages

  • In report program how to keep includes as per the sap format

    hi friends,
      iam geetha , i have a doubt like , just i want to keep includes as per sap format, like
    if i go for first include or double click on include
    it should give list of includes and choose option to choose to choose one of the include and get in to that include.
    regards
    geetha

    Hi Sangeetha....
    Develop one include with four includes....
    If your requirement is defferent plz.. come again...
    Thanks,
    Naveen.I

  • HOW TO KEEP PUSHBUTTON IN OUTPUT SCREEN(ALV)

    HOW TO KEEP PUSHBUTTON IN OUTPUT SCREEN ( ALV FORMAT)

    Hi,
    At selection screen use this below code:
    Eg:
    *SELECTION-SCREEN FUNCTION KEY 1. "Adds button to application toolbar
    Declaration of sel screen buttons
    selection-screen begin of line.
    selection-screen pushbutton (20) w_button user-command but1.
    selection-screen pushbutton (25) w_but2 user-command but2.
    selection-screen end of line.
    Madhu
    Pls reward me if it is useful

  • Macbook Pro - How to keep a low cycle count

    hey everyone,
    Basically I purchased a new macbook pro 11 days ago, and My current cycle count is also 11. I am eager to keep my cycle count down this time round as my last macbook's battery died at around the 700 mark (the laptop was around 15 months old at the time) which I am told was very high. The average apparently being around 300 for a computer that old.
    I have also read on other forums that people have managed to keep their cycle counts much much lower than 300 even for laptops over 15 months old.
    So to maintain my battery's life this time round I was wondering if anyone had any tips on how to keep the cycle count down this time round?
    Many thanks,
    Josh

    I should point out that the batteries that seem to survive the longest are those that get used--i.e. relatively high cycle counts. They are like muscles--use them or lose them. I tried keeping cycles down on my first battery and the results were that it made it only 11 months. Most of the "my battery failed..." posts we see here show a low cycle count.
    Also, you've posted a question about a new MBP in the forum for older ones made in Early 2008 and before. As the battery technology in your new MBP is different (and apparently better) and you have other hardware improvement made since 2008, you should use the forum for the current-generation MBPs here:
    http://discussions.apple.com/category.jspa?categoryID=251
    Not to worry. It's not your fault you found the wrong forum. "Original MacBook Pro" is a pretty non-intuitive label! About a dozen people a day with new MBPs end up here and sometimes get inappropriate advise if responders either don't notice of can't tell that the OP is asking about a newer Mac.

  • How to keep all text and formats the same on multiple computers?

    I'm creating a file in InDesign CS6 on my Windows computer. I keep everything on my flash drive. When I go to school, I bring my flash drive with me and open it up on the Mac computer, but then there are are compatibility issues. There seems to be missing fonts and formats but the school uses the same version of InDesign I do. Now I was told a lot of things of how to keep the fonts and formats the same (embed the links, package the files, outline the text, save as IDML). However, it is not clear to me what each of those options do, so I don't know when or why to use them. So I just want to make sure that when I bring in my file in next Monday, I won't have any missing fonts or formats. What would you suggest is the proper things to do to keep everything the same on multiple computers? And could you please explain why?

    If you want cross-paltform comaptibility limit the fonts to OpenType or Windows TrueType formats, both of which work on both Mac and PC. To avoid missing font warnings the fonts must either be installed on each computer, or they must be in a folder named Document Fonts in the same location as the .indd file they are to work with. Packaging the file will build taht folder for you.
    the rest of the stuff in your list won't help you. .idml would allow you to open on an older version, but does nothing for your situation. Embedding the links will keep you from having missing links, but so will packaging, and embedded links will make the file much larger and harder to work with.
    For goodness sake, don't even think about outlining the text. It stops being text when you do that and you can no longer edit it.
    And finally. do yourself a big favor and don't attempt to actually work on your file directly from the flash drive. Copy the whole package folder to the hard drive, work on it, then copy back. You don't want to know how many files are fatally damaged by write errors on flash drives.

  • How to keep track of the users who are all currently logged in

    Hi All,
    I have basic knowledge of Session and Servlets. I am wondering how to keep track of the users who are all currently logged in. There should be some way of achieving it.
    I thought of it and come up with having an Application variable that hold it when ever a user successfully logged in.
    Thanks in advance for any reply.

    You can do this by keeping data in a static veriable in a some class of yours. The variable will need to be a collection.
    Whenever a user loogs in to the site a servlet/jsp should put the users information in to the collection and when logs off or when the session expires the entry should be take off.
    You can achive this by storing the velues in a some sort of a week collection where the entries are automaticaly removed when all the other refferences to the entry goes out of scope.
    You might need to read bit about java.lang.ref package and WeekReference
    Or you can make the entry in the collection contain the last time that the user visited any of the pages and a thread can run time to time and clean up the older entries which have timed out

  • How to keep 1 full set of Podcast while the rest is "last 10..."?

    Hello all.
    Inside iTunes 7 under the Podcast settings preferences, you can set either to
    -Keep all podcasts, this will just accumulate in the podcast as more new content is downloaded
    -(For example) Keep most recent 10 podcast, older ones will be deleted, right?
    Storing the whole lot of podcast, in iTunes is OK, but especially video podcasts, if chose 1st settings, will just fill up my iPod
    Actually this is what I wanted:
    I have subscribed to the "Happy Tree Friends" video podcasts, and I want to keep the entire lot, and keep them in my iPod too
    But the rest of the podcasts, I just want the most recent ones as most of them are news etc.
    How do I set this in iTunes?
    Thanks and cheers

    I want to do this, too, but can't.
    I can't seem to find any sort of answer anywhere!

  • How to keep homesharing active from iTunes on Lion OS?

    I have 4 Macs (w MBPs, 1 iMac, 1 Mac Mini) and 2 Apple TVs (latest). Only the Mac Mini is on Lion OS (10.7.4) since that is what it came with new. I use it to serve my media to the Apple TVs, but they can also get served from the other 3 Macs (all on Snow Leopard 10.6.8).  Only the Mac Mini on Lion drops homesharing when not in use - the other Macs on Snow Leopard keep homesharing alive. While it is actively streaming, the Mini does not drop the feed.  I have the Mac Mini set to never go to sleep or or to screen saver, so it should remain accessible via homesharing.  But if I don't use it for an hour or two, it drops out of homesharing - and it is the only Mac to do so.  I can get it back by quitting then restarting iTunes or by shutting down homesharing and restarting it while keeping iTunes open.  Of course, a restart of the mini would also bring back full functionality.  None of these are acceptable when you are sitting in another room trying to access media via Apple TV.  As a result of the above, I am assuming that the problem is isolated within Lion OS and how it supports iTunes.
    I have seen other discussions claiming Apple TV drops out, but my problem is definitely the Mac Mini on Lion since at the same time I can see it drops from the other Macs and not just from Apple TV - all homesharing devices lose sight of the Mini but keep seeing each other.
    I'd love to downgrade my Mini to Snow Leopard but apparently can't. I'd buy an older used Mini, but I need HDMI - so, I'm stuck until this is fixed. My other devices will definitely stay on Snow Leopard until I see this problem resolved by Apple.
    Any suggestions on how to keep homesharing alive with iTunes on Lion?

    Everything that is on your ipod should also be on your computer.  is it not?
    You can redownload some purchases:
    Downloading past purchases from the App Store, iBookstore, and ...

  • How to keep multiple function modules under one Web service

    Hi Experts,
    I have Three RFC function modules and i need to create one web service for these three RFC function modules. I know How to crearte a web service for one function module.
    please suggest me How to keep multiple function modules under one Web service.
    Thanks in advance
    Lakshminarayana

    Hi Lakshmi,
    The best way to do it is to assign all the three RFC Enabled FM's to one function group. Later on the top menu in Utilities you get an option to Create a Webservice from a Function Group.
    You can create one single Webservice using all the the 3 FM's.
    I hope this helps.
    Thanks,
    Manu

  • How to keep FI posting period (OB52) closed but keep CO posting periods (OK

    Hi SAP Guru's,
    how to keep FI posting period (OB52) closed but keep CO posting periods (OKP1) open.
    I.e. on Oct 21th the FI posting period 10 should be open but FI posting period 09 should be closed. But on Oct 21th the CO posting period 09 should be open.
    Thanks in Advance.
    RV

    You've already activeted. You can check in IMG-Financial Accounting Global Settings (New) ® Ledgers ® Real-Time Integration of Controlling with Financial Accounting
    Check this for more info http://help.sap.com/saphelp_dimp50/helpdata/en/22/c2cf4031288131e10000000a1550b0/content.htm

  • How to keep file name in print queue when printing crystal report

    We are using VB .Net 2003 + Crystal Report 2008 SP2 up to Fix Pack 2.6
    When the VB program spools crystal report files to print queue, the print queue only shows "Crystal Report" for each document.  How to keep the original file name?  In the past when we were using Crystal Report 11, the original file name can be shown in the print queue.
    Please help because it's so important for operation to see which report is failed in printing when reports are printed in batch.
    Thanks

    Hello,
    Set the PrintOption.JobTitle value for the print job. Here's C# code on how to:
                   System.Drawing.Printing.PrintDocument pDoc = new System.Drawing.Printing.PrintDocument();
                CrystalDecisions.ReportAppServer.Controllers.PrintReportOptions rasPROpts = new CrystalDecisions.ReportAppServer.Controllers.PrintReportOptionsClass();
                CrystalDecisions.ReportAppServer.ReportDefModel.PrintOptions newOpts = new PrintOptionsClass();
                   pDoc.PrinterSettings.PrinterName = cboCurrentPrinters.Text;          
                   rasPROpts.PrinterName = cboCurrentPrinters.Text;               
                   rasPROpts.PaperSize = (CrPaperSizeEnum)
                        pDoc.PrinterSettings.PaperSizes[cboCurrentPaperSizes.SelectedIndex].Kind;
                // this sets the name of the print job
                rasPROpts.JobTitle = "MYPrintJob";
                   rptClientDoc.PrintOutputController.PrintReport(rasPROpts);
                   MessageBox.Show("Printing report.", "RAS", MessageBoxButtons.OK,MessageBoxIcon.Information );
    Thank you
    Don

  • I was running Firefox on another computer that lost it's motherboard, was able to salvage the harddrive, but my mail files on the older hard drive have a different name, how can I pull or import those older files into firefox running on another computer?

    I had been running other email clients for years and finally switched to Firefox. All the while importing my other email folders. So I had quite a large history of email. I had been backing up my system using Acronis for years. My desktop's motherboard crashed and was not worth repairing. I pulled my desktop hard drive and turned it in a standalone drive. I re-established my email on a laptop starting from scratch using Firefox. I would like to import (if possible) the emails history that is stored on the standalone drive (formerly my old hard drive). However, the names of the mail folders on the drives are different. For example: current computer the mail folder is named garlic.com. On the standalone drive (old hard drive) there are several folders and they are named, for instance; mail.garlic.com, mail.garlic-1.com , and so forth. it goes up through garlic-4.com.
    How can I pull or import these older folders into my current email folder and see all my old email archives?

    You are not going to be able to run your old system from the backup on this old computer as the hardware is incompatible.
    You need to get a new computer or a refurbished one.

  • Does anyone know how to keep all songs in the same album when they say featuring someone?

    Each time I load a CD onto Itunes that has an artist who features another artist on that particular song, it puts it in my library as a separate CD even though it will have the same album listed.  For instance Lady Gaga's song just dance features Colby O'Donnis that song is in its own spot while the rest of the cd is together that one song is separate and I don't know how to keep them all together.  Someone help.

    Get the Informations for that song and have a look in the "Sorting" area if there is something different. The data inserted there is just for how iTunes will order the songs.
    If the Interpret in the general informations is "Lady Gaga" and in the sorting area is "Lady Gaga feat. xxxx" than you'll see Lady Gaga as the interpret but it's sort to a second entry "Lady Gaga feat. xxxx".

  • How to keep songs on iphone, work computer and home computer the same?

    How to keep songs on iphone, work computer and home computer the same?
    This seems like something everyone would want to do. I don't know why Apple won't give us a simple solution. They could even charge us for it. I would pay!
    Has anyone solved this? What is your solution?
    Thanks!
    [email protected]

    If you just want to be able to sync your devices to the same PC without having them get overwritten all the times, here is a free method
    http://cnettv.cnet.com/sync-your-ipod-two-computers/9742-1_53-50004835.html
    Basically, you put the same itunes database file on all the PCs. This fakes itunes into thinking it is always the same PC and the ipod is OK to sync with it. It will NOT keep your libraries truly synced, though. I've just resigned myself to always buying from one PC and manually transferring the content to other PCs I want it on.

  • How to keep track of how many times a link has been clicked?

    How to keep track of how many times a link has been clicked or accessed? Do I need to use database for this?

    Hi
    Proably something like this can work,
    1> Have a servlet/bean invoked when the link is linked
    2> have a static variable in that servlet/bean wich gets incremented before the control is passed to another desired page..
    The problem with this approach is that care has to be taken that the servlet/bean is not re-instalised, in case of which the static variable will also be instalised and the data would be lost.
    The best thing is to store the count in the database.
    Regards
    Arathi.

Maybe you are looking for