How to keep a screenshot in white on black

I currently have my MacBook running in white on black mode. I found an emblem/logo that looks really cool in this mode, and I want to take a screenshot of it. When I do so, the screenshot only shows the image in its original form. Is there a way to keep the image that I capture in white on black mode? This would probably be more like taking a picture.

Camera shot then crop in preview or iPhoto seems to be the best bet.
I've tried Grab and the usual command shift 3 .. neither work.
I have graphic converter.. if you have great.

Similar Messages

How to get rid of blank white page next to cover page when converting an indesign file into a pdf flip book

Hey Everyone,
I created an catalog using indesign and now I want to convert that into a pdf flip book. I have exported it as a SWF then changing the SWF back into a pdf. It works great however, I keep getting a blank white page next too my cover page, and I really don't want this. I find it very distracting and visually unappealing. Is there any way to get rid of this blank white page? Or any other suggestions on how to create a flip book out of an indesign file.

It sounds as if you're not checking the pagination properties of the chapter after the problem within the book file.
The book file settings always trump the component file's settings.
So this would mean that, if Chapter 3 is set in the book file to start on a Right page, the book enforces this by adding a blank page to Chapter 2.
You should be able to fix this by selecting all the component chapters in the book, right-clicking and setting all the pagination properties to start on Next Available page, but I don't have 7 on this system so I can't give you the exact key strokes.
Art

How do I re-pair the white Remote with iTunes and/or AppleTV 1

how do I re-pair the white Remote with iTunes and/or AppleTV 1...?
iMac 8,1 - OSX10.6.8

Note that our test system may show more or different columns than yours, but what you see in this screenshot is our iTunes 11 music library in "Songs" view, sorted by artist. The major difference from prior versions of iTunes is the lack of the sidebar that gave you quick access to all of your content.
Don't worry, it's still available! We just have to turn it on. To do so, go to the View menu and choose "Show Sidebar," as shown in the image below:
http://www.macobserver.com/tmo/article/how-to-restore-the-sidebar-in-itunes-11
I saw this on their web site... Hope it helps.
WEU

How to keep tracks together in shuffle mode?

When playing in shuffle mode you can't hear tracks in line together while they should be, e.g. in conceptalbums.
Is there a way to overcome this?
(You can do it with complete albums when downloading in the Library, but what can you do when the tracks are already in the Library?)

Joepiet wrote:
The second tab is calles 'Info' as well. Down under you have the possibilty to mark Part of a collection (Deel van verzameling). It should do the trick but it doesn't. I once tried, but I haven't found out what it does.
In English, that is named as "Part of a compilation" and Google Translates that as "Deel van een compilatie". As far as iTunes is concerned, this means that the album has songs by different artists, albums such as the "Now X" series. It is how iTunes keeps a Various Artists album together.
Joepiet wrote:
I want to shuffle works, not tracks..
Ah! I see what you want now!
Two possibilities that I can think of (number 2 is the better one):
Create a Playlist for each "work", by simply adding all the songs from one work to one Playlist and all songs from the next work to another Playlist and so on. Then, if you want to play one complete work, followed by another complete work, you could simply create a further Playlist and add each "work Playlist" you want to this new Playlist. To make the works random, all you could do is choose for yourself as you are adding them. You would need to play this new Playlist in order, not shuffle.
If you originally imported this music from a CD, you could import from the CD again. But this time, combine the tracks that make up one work, as one track. iTunes names this as "Join CD Tracks" (or CD-tracks samenvoegen in the Dutch iTunes).
In the screenshot above, I have selected tracks one, two and three and then used the options menu to find Join CD Tracks. This third option will not be visible until you select two or more adjacent tracks, as shown above.
In the screenshot below, I have joined tracks one, two and three as one "work". Then joined tracks four, five and six as a separate work. Finally, I've joined tracks seven through twelve as a third work.
Notice in the screenshot that the Options menu says "Unjoin CD Tracks". That is because the highlighted ones (7-12) are currently joined.
And here it is in Dutch:
With this second method, a work (of several tracks) will always be played as one track (or song). You can then simply add all the individual works to one Playlist, and play the Playlist in Shuffle Songs mode. That way, each work would be played in full, followed, at random, by another work.)
And if you really need to - import the CD this second time with a slightly different album name, so that you then have two copies. One, where each song (or track) is the individual song on the album and the second where each "song" is a work.
Now, lets hope I can get my iTunes back into "English" English, as my Dutch is not too good, even though I'm just the other side of the North Sea from you!

How to take a screenshot

A popular question that keeps coming back is how to take a screenshot.
How to do this can differ between models and firmware version but there are two different methods used in Xperia devices.
1.
Press and hold the on/off button. This will bring up the options window you see below. Tap Take screenshot to capture your screen.
This can be done while in any application or menu of the phone.
2.
Press and hold both on/off and volume down (-) key at the same time for about 2 seconds and the phone will take a screenshot of the present screen.
After you’ve taken a screenshot you’ll see this icon in the top left corner of your notification bar. (Goes for both method 1 and 2)
Drop down the notification bar and you will be able to instantly share your screenshot to any of your supported applications by pressing the share button.
All screenshots you’ve taken will be saved so you can view them later in the album application.
- Community Manager Sony Xperia Support Forum
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Command-Shift-3 for the entire screen
Command-Shift-4 for the selection you make( the cursor changes to cross hair)
Command-Shift-4 and then Spacebar will change cursor to camera and you are able to select windows, documents.
This can also be found in the online Help (in the Finder hit Command-? and search for "Shortcuts for taking pictures of the screen"
JJ
Sidney, you beat me to it

How can I change the background of a running webpage on my own. Example Facebook I want to change its backround color from white to black just in my view not for all

How can I change the background of a running webpage on my own. Example Facebook I want to change its background color from white to black just in my view, not for all. Cause I really hate some site with white background because as I read for an hour it aches my eyes but not on those with darker background color.

You can use the NoSquint extension to set font sizes (text/page zoom) and text colors on web pages.
*NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/

How to keep multiple function modules under one Web service

Hi Experts,
I have Three RFC function modules and i need to create one web service for these three RFC function modules. I know How to crearte a web service for one function module.
please suggest me How to keep multiple function modules under one Web service.
Thanks in advance
Lakshminarayana

Hi Lakshmi,
The best way to do it is to assign all the three RFC Enabled FM's to one function group. Later on the top menu in Utilities you get an option to Create a Webservice from a Function Group.
You can create one single Webservice using all the the 3 FM's.
I hope this helps.
Thanks,
Manu

How to keep FI posting period (OB52) closed but keep CO posting periods (OK

Hi SAP Guru's,
how to keep FI posting period (OB52) closed but keep CO posting periods (OKP1) open.
I.e. on Oct 21th the FI posting period 10 should be open but FI posting period 09 should be closed. But on Oct 21th the CO posting period 09 should be open.
Thanks in Advance.
RV

You've already activeted. You can check in IMG-Financial Accounting Global Settings (New) ® Ledgers ® Real-Time Integration of Controlling with Financial Accounting
Check this for more info http://help.sap.com/saphelp_dimp50/helpdata/en/22/c2cf4031288131e10000000a1550b0/content.htm

How to keep file name in print queue when printing crystal report

We are using VB .Net 2003 + Crystal Report 2008 SP2 up to Fix Pack 2.6
When the VB program spools crystal report files to print queue, the print queue only shows "Crystal Report" for each document. How to keep the original file name? In the past when we were using Crystal Report 11, the original file name can be shown in the print queue.
Please help because it's so important for operation to see which report is failed in printing when reports are printed in batch.
Thanks

Hello,
Set the PrintOption.JobTitle value for the print job. Here's C# code on how to:
               System.Drawing.Printing.PrintDocument pDoc = new System.Drawing.Printing.PrintDocument();
            CrystalDecisions.ReportAppServer.Controllers.PrintReportOptions rasPROpts = new CrystalDecisions.ReportAppServer.Controllers.PrintReportOptionsClass();
            CrystalDecisions.ReportAppServer.ReportDefModel.PrintOptions newOpts = new PrintOptionsClass();
               pDoc.PrinterSettings.PrinterName = cboCurrentPrinters.Text;
               rasPROpts.PrinterName = cboCurrentPrinters.Text;
               rasPROpts.PaperSize = (CrPaperSizeEnum)
                    pDoc.PrinterSettings.PaperSizes[cboCurrentPaperSizes.SelectedIndex].Kind;
            // this sets the name of the print job
            rasPROpts.JobTitle = "MYPrintJob";
               rptClientDoc.PrintOutputController.PrintReport(rasPROpts);
               MessageBox.Show("Printing report.", "RAS", MessageBoxButtons.OK,MessageBoxIcon.Information );
Thank you
Don

Macbook Pro - How to keep a low cycle count

hey everyone,
Basically I purchased a new macbook pro 11 days ago, and My current cycle count is also 11. I am eager to keep my cycle count down this time round as my last macbook's battery died at around the 700 mark (the laptop was around 15 months old at the time) which I am told was very high. The average apparently being around 300 for a computer that old.
I have also read on other forums that people have managed to keep their cycle counts much much lower than 300 even for laptops over 15 months old.
So to maintain my battery's life this time round I was wondering if anyone had any tips on how to keep the cycle count down this time round?
Many thanks,
Josh

I should point out that the batteries that seem to survive the longest are those that get used--i.e. relatively high cycle counts. They are like muscles--use them or lose them. I tried keeping cycles down on my first battery and the results were that it made it only 11 months. Most of the "my battery failed..." posts we see here show a low cycle count.
Also, you've posted a question about a new MBP in the forum for older ones made in Early 2008 and before. As the battery technology in your new MBP is different (and apparently better) and you have other hardware improvement made since 2008, you should use the forum for the current-generation MBPs here:
http://discussions.apple.com/category.jspa?categoryID=251
Not to worry. It's not your fault you found the wrong forum. "Original MacBook Pro" is a pretty non-intuitive label! About a dozen people a day with new MBPs end up here and sometimes get inappropriate advise if responders either don't notice of can't tell that the OP is asking about a newer Mac.

How to keep all text and formats the same on multiple computers?

I'm creating a file in InDesign CS6 on my Windows computer. I keep everything on my flash drive. When I go to school, I bring my flash drive with me and open it up on the Mac computer, but then there are are compatibility issues. There seems to be missing fonts and formats but the school uses the same version of InDesign I do. Now I was told a lot of things of how to keep the fonts and formats the same (embed the links, package the files, outline the text, save as IDML). However, it is not clear to me what each of those options do, so I don't know when or why to use them. So I just want to make sure that when I bring in my file in next Monday, I won't have any missing fonts or formats. What would you suggest is the proper things to do to keep everything the same on multiple computers? And could you please explain why?

If you want cross-paltform comaptibility limit the fonts to OpenType or Windows TrueType formats, both of which work on both Mac and PC. To avoid missing font warnings the fonts must either be installed on each computer, or they must be in a folder named Document Fonts in the same location as the .indd file they are to work with. Packaging the file will build taht folder for you.
the rest of the stuff in your list won't help you. .idml would allow you to open on an older version, but does nothing for your situation. Embedding the links will keep you from having missing links, but so will packaging, and embedded links will make the file much larger and harder to work with.
For goodness sake, don't even think about outlining the text. It stops being text when you do that and you can no longer edit it.
And finally. do yourself a big favor and don't attempt to actually work on your file directly from the flash drive. Copy the whole package folder to the hard drive, work on it, then copy back. You don't want to know how many files are fatally damaged by write errors on flash drives.

Does anyone know how to keep all songs in the same album when they say featuring someone?

Each time I load a CD onto Itunes that has an artist who features another artist on that particular song, it puts it in my library as a separate CD even though it will have the same album listed. For instance Lady Gaga's song just dance features Colby O'Donnis that song is in its own spot while the rest of the cd is together that one song is separate and I don't know how to keep them all together. Someone help.

Get the Informations for that song and have a look in the "Sorting" area if there is something different. The data inserted there is just for how iTunes will order the songs.
If the Interpret in the general informations is "Lady Gaga" and in the sorting area is "Lady Gaga feat. xxxx" than you'll see Lady Gaga as the interpret but it's sort to a second entry "Lady Gaga feat. xxxx".

How to keep songs on iphone, work computer and home computer the same?

How to keep songs on iphone, work computer and home computer the same?
This seems like something everyone would want to do. I don't know why Apple won't give us a simple solution. They could even charge us for it. I would pay!
Has anyone solved this? What is your solution?
Thanks!
[email protected]

If you just want to be able to sync your devices to the same PC without having them get overwritten all the times, here is a free method
http://cnettv.cnet.com/sync-your-ipod-two-computers/9742-1_53-50004835.html
Basically, you put the same itunes database file on all the PCs. This fakes itunes into thinking it is always the same PC and the ipod is OK to sync with it. It will NOT keep your libraries truly synced, though. I've just resigned myself to always buying from one PC and manually transferring the content to other PCs I want it on.

How can I get rid of white bar at top of desktop? MacBook Pro 10.5.8

Hello,
There is a 4" blank (or white) bar at the top RIGHT of my desktop, to the left of the Spotlight magnifier icon. The bar blanks out all of these drop-downs: Open Time Machine Preferences, Detect Displays/Display Preferences, Open Bluetooth Preferences, Volume Bar, Open Network Preferences, inport Source, Battey Charge display/Energy Saver Preferences, Date & Time set pref.
Drives me nuts, to use a technical term! I can't see the time in the bar, can't adjust volume, can't check to see how many others are online in my condo complex. I like to try to go on when the highway isn't jammed up.
Can anyone tell me how to remove that annoying blank white bar. I call it white because it covers the color on my desktop. That's why I don't think it's like a blank cell.
Would appreciate any help and give BIG plaudits to anyone who can HELP!
Thanks for reading this.

Hi Clinton,
I appreciate your suggestion and think I'll take your second suggestion. Been chiding myself for waiting so long to go with my begging bowl to the great Genius bar. Don't know if I'm ready to spring for the latest version, since everything else I need seems okay. You know how it is, it seems so simple: "If I could just get the key word the answer would pop up."
It's really nice to know there is someone there reading these questions! Last time I asked a question I must have clicked on something incorrectly: my Inbox was flooded with replies, none of which even slightly addressed my problem, as you have.
Thanks again and happy Sunday!
Cat's PJ's

How to keep track of how many times a link has been clicked?

How to keep track of how many times a link has been clicked or accessed? Do I need to use database for this?

Hi
Proably something like this can work,
1> Have a servlet/bean invoked when the link is linked
2> have a static variable in that servlet/bean wich gets incremented before the control is passed to another desired page..
The problem with this approach is that care has to be taken that the servlet/bean is not re-instalised, in case of which the static variable will also be instalised and the data would be lost.
The best thing is to store the count in the database.
Regards
Arathi.

How to keep a screenshot in white on black

Similar Messages

Maybe you are looking for