How to keep aggregated link interface across live upgrade partitions?

I'm running Solaris 10 11/06 s10x_u3wos_10 X86 on a 2100. I have nge1 and nge0 in an aggregated link interface aggr1. I have the /etc/hostname.aggr1 file, and aggr1 comes up fine on reboots. I also have a Live Upgrade partition, and it doesn't come up when I activate my Live Upgrade partition. I get a message on the console saying it failed to plumb aggr1, so I can see it was at least trying. I do see the /etc/hostname.aggr1 on the Live Upgrade partition and it has the correct IP & netmask, so that file synchronized fine. I don't have any errors or warnings in /etc/lu/sync.log. My other link interface bge0 (not aggregated) comes up fine on the Live Upgrade partition, it is just the aggregated one that doesn't come up. Also, when I removed the aggregated interface, nge1 and nge0 came up fine on the Live Upgrade partition too. It seems to be just the aggregated interface that has problems. Is there something else I need to do on the original partition to make sure aggr1 will come up on the Live Upgrade partition?
This seemed similar to bug id 6369648, but I have the patch 120991-02 installed, and I don't lose aggr1 on reboots. I only lose it after activating the other Live Upgrade partition.

I just found a file /etc/aggregation.conf, which was not added to the Live Upgrade synclist (/etc/lu/synclist). I'm hoping by adding that file, it will get synchronized and the plumb will work.

Similar Messages

How to delete file systems from a Live Upgrade environment

How to delete non-critical file systems from a Live Upgrade boot environment?
Here is the situation.
I have a Sol 10 upd 3 machine with 3 disks which I intend to upgrade to Sol 10 upd 6.
Current layout
Disk 0: 16 GB:
/dev/dsk/c0t0d0s0 1.9G /
/dev/dsk/c0t0d0s1 692M /usr/openwin
/dev/dsk/c0t0d0s3 7.7G /var
/dev/dsk/c0t0d0s4 3.9G swap
/dev/dsk/c0t0d0s5 2.5G /tmp
Disk 1: 16 GB:
/dev/dsk/c0t1d0s0 7.7G /usr
/dev/dsk/c0t1d0s1 1.8G /opt
/dev/dsk/c0t1d0s3 3.2G /data1
/dev/dsk/c0t1d0s4 3.9G /data2
Disk 2: 33 GB:
/dev/dsk/c0t2d0s0 33G /data3
The data file systems are not in use right now, and I was thinking of
partitioning the data3 into 2 or 3 file systems and then creating
a new BE.
However, the system already has a BE (named s10) and that BE lists
all of the filesystems, incl the data ones.
# lufslist -n 's10'
boot environment name: s10
This boot environment is currently active.
This boot environment will be active on next system boot.
Filesystem fstype device size Mounted on Mount Options
/dev/dsk/c0t0d0s4 swap 4201703424 - -
/dev/dsk/c0t0d0s0 ufs 2098059264 / -
/dev/dsk/c0t1d0s0 ufs 8390375424 /usr -
/dev/dsk/c0t0d0s3 ufs 8390375424 /var -
/dev/dsk/c0t1d0s3 ufs 3505453056 /data1 -
/dev/dsk/c0t1d0s1 ufs 1997531136 /opt -
/dev/dsk/c0t1d0s4 ufs 4294785024 /data2 -
/dev/dsk/c0t2d0s0 ufs 36507484160 /data3 -
/dev/dsk/c0t0d0s5 ufs 2727290880 /tmp -
/dev/dsk/c0t0d0s1 ufs 770715648 /usr/openwin -
I browsed the Solaris 10 Installation Guide and the man pages
for the lu commands, but can not find how to remove the data
file systems from the BE.
How do I do a live upgrade on this system?
Thanks for your help.

Thanks for the tips.
I commented out the entries in /etc/vfstab, also had to remove the files /etc/lutab and /etc/lu/ICF.1
and then could create the Boot Environment from scratch.
I was also able to create another boot environment and copied into it,
but now I'm facing a different problem, error when trying to upgrade.
# lustatus
Boot Environment           Is       Active Active    Can    Copy
Name                       Complete Now    On Reboot Delete Status
s10                        yes      yes    yes       no     -
s10u6                      yes      no     no        yes    -        Now, I have the Solaris 10 Update 6 DVD image on another machine
which shares out the directory. I mounted it on this machine,
did a lofiadm and mounted that at /cdrom.
# ls -CF /cdrom /cdrom/boot /cdrom/platform
/cdrom:
Copyright                     boot/
JDS-THIRDPARTYLICENSEREADME   installer*
License/                      platform/
Solaris_10/
/cdrom/boot:
hsfs.bootblock   sparc.miniroot
/cdrom/platform:
sun4u/   sun4us/ sun4v/Now I did luupgrade and I get this error:
# luupgrade -u -n s10u6 -s /cdrom
ERROR: The media miniroot archive does not exist </cdrom/boot/x86.miniroot>.
ERROR: Cannot unmount miniroot at </cdrom/Solaris_10/Tools/Boot>.I find it strange that this sparc machine is complaining about x86.miniroot.
BTW, the machine on which the DVD image is happens to be x86 running Sol 10.
I thought that wouldn't matter, as it is just NFS sharing a directory which has a DVD image.
What am I doing wrong?
Thanks.

How to keep visited links from changing color?

FIRST, I want to say that it took me 10 minutes to find (accidentally) how to start a new thread. In my profile? Could it be any more obscure?
</rant>
Yeah, I go to change page properties and make links and visited links the same color. It still changes, and this happens to be on a page where the background color provides poor contrast to the color the links are changing to. Is there a way to do this that is not overridden by the web gods? Or whatever?
Thanks

Yeah, I'm a dinosaur.
Learned HTML from Elizabeth Castro's first edition; then went to DW MX,
where I am stuck. Works for me, obviously with imperfections, as I am
hardly cutting edge multimedial gripping Web designer.
Thanks for observations.
I'll ask for help again: I really, truly, cannot find how to start a
thread on the forum, nor reply to one, and all that. I don't see any FAQ
tht elementary, nor anyone to e-mail for guidance. If you can offer a
little of that, I will be grateful.
Thanks,
Denno
It's a very dated website using extremely outdated code.
Â
There's a whole mix of HTML formatting and font tags in there which were
deprecated 10+ years ago.
Â
This all means that the website will behave in strange ways sometimes.
Â
Although it can be fixed, it would take hours to debug, explain and
implement the changes required, particularly if you've never used CSS
styling before.
Â
You're better off investing some cash in a modern, well coded, CSS
formatted template which will give you a sound foundation.
e.g. http://www.projectseven.com/products/templates/index.htm
Â
Then you can add your content and get good results quickly.
>

How to keep the ethernet interface up when removing the cable?

On 10.6 I notice that if the ethernet cable is unplugged, it will not bring the interface up. As a result, I cannot test my server without the interface attached. For instance, if en0 is 192.168.2.10 and a web server is running, the local DNS translates the web servers domain to 192.168.2.10, I cannot reach my own web server as there is no route to host. This is probably energy conservation issue, but it makes life rather unpleasant, because if the interface goes down when there is a cable problem, I also get all sorts of internal problems because of the missing host (e.g. a virtual machine looking for a DNS server on 192.168.2.10 which is suddenly unreachable).
This was not the case with 10.5 Server and I think the last time I had this kind of behaviour was with my NeXT cube where the en0 interface would not come up without a cable attached to it and a switch.
So, is there a way I can force OS X 10.6 to bring up the en0 interface on 192.168.2.10 no matter what?

I have made my DNS reachable at all times by using 127.0.0.1 for the "DNS to use" in my ethernet settings in System Preferences.
Using localhost is no go, as I am running three separate IP-addresses (three en intrerfaces) on my single RJ-45. This way, I can let several web sites for different domains listen to different IP-addresses. Furthermore, I can make sure on the router's NAT that for instance only one of those gets the port 443 traffic and that one does not get port 80 and the other way around.
The solution I have now is a cable attached to a switch attached to nothing else. But it is inelegant, I'd rather know how to make the interfaces come up regardless what is attached to the RJ-45.

How to keep from linking

There are 3 devices, my husband, me and my son. I cannot be linked to my husband with ICloud because his is a work phone. When I first set up my ITunes years ago we together put his e-mail etc..The guy at the AT&T store said when we all got new IPhones a few months ago told my husband don't open up an app or download an app yet until your wife gets it seperated or all of you will be linked. Well now he has got to download an app for work. So time has run out. And if he downloads an app, we will be linked and I don't want to know his buisness, he doesn't want to know mine and there are confidentialty reasons I can't see his because of HIPPA. For me and my 11 year old son to be linked not a big deal I enjoyed being able to see ALL texts sent and sent to by my son. HELP. How do I get unlinked?

Welcome to the Apple Community.
Your personal data is stored in contacts, notes, calendars etc. You can each have your own iCloud account so that this data is private, but you can also choose to continue to share the iTunes account so that you share your music and app purchases.
Messages is another separate account as is FaceTime, once again you can each have your own ID for these services for privacy.

How to keep Anchor links for all small piece of Images in a BIG Image?

Hey,
I have a Bigger Image, in which I have some number of Images (created it through Fireworks)..
Now I need a links to all those piece images
For more info: pls check my actual thread here: http://forums.adobe.com/message/4695100#4695100
Hoping for quick soln..
Thanx!

HI,
I just did what mentioned in that link, i was able to create an image with links..
BUT my requirement is quite different: Iam using Nivo Slider JQuery Plugin in which Iam thinking to place an Images in which it displays some 3 products in each images.. so If I place 3 images, it means it displays 9 products (3 products in each Image).. that means, there should be 3 differnt anchor links in each image and total 9 anchor links for 3 images.
I guess iam clear.. BUT iam not sure whether this is POSSSIBLE practically or not..
COuld you please suggest whether this is possible or not..?
FYI, here is a jqurey plugin you can get freely: http://nivo.dev7studios.com/
I will be glad if anyone helps me out in this..
Thanks!

How to keep mail attachments synced across iPhone and Mac?

Hardware: iPhone 4 with iOS 5.0.1, MacBook Pro 10.7.2.
Software: Mail
Services: Yahoo mail
Issue: If I view an email on my phone without opening the attachment, the same email then appears on my Mac but without the attachment. The attachment is still present if I log on to Yahoo webmail.
This issue is causing me a lot of hassle and I risk missing important work related attachments when these are not flagged in the email message.
Is there a fix?

Hi there,
I have the similar problem and I was hoping that a solution has been derived by now.
Actually, already using iPhone, recently switched from PC to iMac and have a small issue with Mail that whenever I open any emails on my iPhone it marks the same email on iMac as "Read" and vice versa.
I need to keep emails on both devices as "UNREAD" until I open the email on that particular device. I do not want to automatically mark (sync) the email on iMac which I open on iPhone and vice versa.
Any help appreciated!
Cheers!

How to keep user settings / app data when upgrading hard drive

I am in the process of upgrading the original 160GB hard drive to something a bit bigger. I'm comfortable with the physical process of installing the new drive, but my question is:
How do I save the existing users / data and transfer to the new installed HD? I really don't want to have to re-install all of the applications, manually save data from each profile and copy, etc etc.
Is there a decent back up utility I can use, and then simply "restore"?

You can get a firewire external drive and use SuperDuper! to clone your current drive to the external. After initializing the new internal drive, all you have to do is perform a reverse clone (which I did yesterday by the way, don't ask) and your new drive will have everything the old one did.
Good luck and let us know how you made out.

How do I add zones to aggregation link in solaris 10

I am not sure what is the best way I should connect my zones to the aggregation link I am creating in my global zone.
This is how I am creating the aggregation link with unused links for backup purposes.
# dladm create-aggr -d bge0 -d bge1 -d bge2 33
# ifconfig aggr33 plumb
# ifconfig aggr33 10.2.XX.XX/23 broadcast + up
At this point I would be ready to have the zones use the aggregated link on the global zone.
I already have bge3 setup on the global zone for my production interface for which the zones are also using.
bge3--> Global zone
bge3:0--> ZoneA
bge3:1--> ZoneB
and so on.
Is it possible to use the same logic when adding the zones to the aggregated link on the global zone.
aggr33 -->Global zone
aggr33:0--> ZoneA
aggr33.1--> ZoneB
And so on.
Thank you
Paul.

Sorry forgot to add that I am running.
-bash-4.3# more release
Oracle Solaris 10 1/13 s10s_u11wos_24a SPARC
Copyright (c) 1983, 2013, Oracle and/or its affiliates. All rights reserved.
Assembled 17 January 2013

How do I delete duplicate songs, but keep a link in their original albums to the single copy of the song left, so it will play in each album in sequence as if it were still there?

Greetings!
After importing my 300 or so CDs into iTunes, I found I have tons of duplicate songs.
Example: I have a song that came in a original album, then in again in a "Greatest Hits" album, then again in a "Hits of the 80's" album, and again in a soundtrack album. I have now have 4 copies of the exact same song.
How do I delete duplicate songs, but keep a link in their original albums back to the single copy of the song left, so it will play in each album in sequence as if it were still there?
I don't think this currently exists, but as my library keeps growing the duplicates keep growing. It would be nice if Apple sees this and adds a way to link songs to multiple albums.
I don't want to create a custom playlist for every album that has a duplicate song or two (I'd have dozens of playlists) - thought about fixing it that way but not really practical.

To my knowledge, there is no way of doing what you want. The only workaround is to create playlists for the other albums containing the track, but that isn't practical for most people.
You could provide Apple with feedback here: http://www.apple.com/feedback/itunesapp.html

How to keep track of how many times a link has been clicked?

How to keep track of how many times a link has been clicked or accessed? Do I need to use database for this?

Hi
Proably something like this can work,
1> Have a servlet/bean invoked when the link is linked
2> have a static variable in that servlet/bean wich gets incremented before the control is passed to another desired page..
The problem with this approach is that care has to be taken that the servlet/bean is not re-instalised, in case of which the static variable will also be instalised and the data would be lost.
The best thing is to store the count in the database.
Regards
Arathi.

How to keep links in a pdf converting from MAc word

Hey.
I need to create a pdf with a document created in MAC word - and keep the links. This doesn't seem to be working.
Help??

That makes sense. So I guess it looks like I have 2 options.
1. Put the JS short code in and have it open the link in a new window if the user opens it in adobe. If a google chrome user opens it in the default viewer, they wont be able to use the link at all.
2. Leave the link how it is, and it will be usable in both viewers, but will not open it in a new window.
I am sureprised that opening the link in a new window isn't just an option in Acrobat Pro. I wouldn't think you'd have to make a workaround like this.
Is there an alternative way to have a page link on the form so that people can go to another .pdf whil keeping the main one open?

I want to bring in text from Word (and the web) that is already hyperlinked into InDesign. How do I do it while keeping the links active?

I want to bring in text from Word (and the web) that is already hyperlinked into InDesign. How do I do it while keeping the links active?
Whenever I copy/paste from web or Word it removes the hyperlinks. And when I try to do it by "Place"ing a Word document into my InDesign project it keeps the formatting with it, the rectangles around the text.
I have the latest version of InDesign.
Any help is appreciated.

Copy-and-paste may not include formatting. A regular import using Place is the best way.
The rectangles around the hyperlinks are just to indicate they are links -- they do not print, but they do show up in your PDF.
You can remove them by double-clicking the hyperlink in the Hyperlinks panel and select "Invisible Rectangle" as type.
Typically, Word hyperlinks are formatted -- blue text, underline -- with a Character Style. If you want to remove or change the formatting, all you have to do is change the character style. My experience, though, is you must check all hyperlinks because for no apparent reason sometimes they appear in the document without the character style.

How to distribute App Store Link before going live?

I'm new to the Itunes Connect process, and am wondering how to distribute my App Store Link before going live. My App is approved and is scheduled to launch on the App Store on September 15th. I'm about to send correspondance out to the various online review sites, but am missing this one important link that I need to supply to them.
Itunes Connect is currently Down for Scheduled Maintenance. Do I find the link there? I do have my App ID and SKU. Can I extrapolate the link based on these?
Any insight would be appreciated!

>Can I extrapolate the link based on these?
Not that I'm aware of, no.
Find the app's store id number in iTunes Connect, then use http://itunes.apple.com/linkmaker/ - this site will generate a link with a button based which book, app, song, podcast etc. you search for in the store.

How can I keep the links between pages in a PDF file after the file has been saved?

My accounting department has just starting using Adobe Acrobat XI Standard to make our account reconciliations. I like that we can create links between one page and the next, so that we can show our supervisor where the account balances tie to the supporting documentation. But I have noticed the links disappear after my supervisor reviews and signs the PDF file. Is there a way we can keep the links after it is signed? Please note that we are not using EchoSign, just the “place signature” function in Acrobat.

When a document is signed, the signer has the option of locking the document. The links won't be active if the document is locked, so to avoid this, instruct the signer not to lock when signing.

How to keep aggregated link interface across live upgrade partitions?

Similar Messages

Maybe you are looking for