How to keep bookmar bar from launching

Everytime I open my computer the Bookmarks menu shows up on the left intead of the usual Dock screen.  I cannot seem to be able to get to the old dock screen.  Could someone help....Thanks

Perhaps the question is not clear.
I want the progress bar to remain in front of the parent frame as long as it is visible on screen.that is when i click on the parent frame,progress bar should not go behind the frame.
Can ne1 plz help?
Regards,
Mansi

Similar Messages

  • How do I stop iphoto from launching itself every time I use my laptop?

    How do I stop Iphoto from launching itself every time I use my laptop?

    Some possibilities:
    Right click on the iPhoto icon in the Dock. Is Open at Log In Selected?
    Check your System Preferences -> Accounts -> Log In Items
    Is there a camera or anything that your Mac might think is a camera (flash drive, USB Hard Disk formatted to a FAT format, phone) attached to your Mac. If so, disconnect it. If you don't want to disconnect it, set iPhoto to "Do Nothing" when a camera is attached. You do this in the iPhoto Preferences.

  • How do I stop iPhoto from launching?

    How do I stop iPhoto from launching?
    I usually find it's much easier to just use Photoshop to edit my pictures... iPhoto is slow as molasses in January.
    How do I stop iPhoto from launching everytime I connect my camera?
    I looked everywhere and can't find anyplace to stop it...
    Thanks!

    How do I stop iPhoto from launching?
    The same way one starts it -- Launch Image Capture, open the application's Preferences (from the Image Capture menu) and change the settings associated with connecting your camera.

  • How can I stop applications from launching at login and wake?

    An application, Spotify, launches each time I boot or wake my MacBook. The user preferences do not include Spotify in the login items and Spotify's preferences have "do no start at login" selected. How can I stop Spotify from launching at unwanted times?

    Try system preferences> check disable automatic login.

  • After upgrading to Safari 6.0 (running 10.7.4), when launching Safari, Mail also launches.  How do I disable Mail from launching simultaneously?

    Whenever I try to open only Safari, Mail automatically launches.  I cannot seem to figure out how to stop it from doing this.  I am certain that this is not about programs launching at login.  It only began after I did the Safari 6.0 update.  I cannot find anything in preferences on how to stop Mail from launching. 

    Read this whole message before doing anything.
    Back up all data if you haven’t already done so. Before proceeding, you must be sure you can restore your system to the state it’s in now.
    Quit Safari if it’s running. Then select  ▹ Force Quit... from the menu bar. A small window will open with a list of running applications. Safari may appear in that list, even though you quit it. If so, select it and press return. Close the window.
    Step 1
    In the Finder, press the key combination shift-command-A to open the Applications folder. Select the Safari icon in that folder and press the key combination command-I to open the Info window. There’s a checkbox in the Info window labeled Open in 32-bit mode. Uncheck it, if checked. Close the Info window and the Applications folder.
    Hold down the option key and select Go ▹ Library from the Finder menu bar. Delete the following items from the Library folder (some may not exist):
    Caches/com.apple.Safari
    Caches/com.apple.WebKit.PluginProcess
    Caches/Metadata/Safari
    Preferences/com.apple.WebKit.PluginHost.plist
    Preferences/com.apple.WebKit.PluginProcess.plist
    Saved Application State/com.apple.Safari.savedState
    Leave the Library folder open. Try Safari again. If it works now, stop here. Close the Library folder.
    Step 2
    If you still have problems, quit Safari again.
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the page that opens.
    Drag or copy — do not type — the following line into the Terminal window, then press return:
    rm -fr $TMPDIR../C/com.apple.Safari
    Quit Terminal. Launch Safari and test.
    Step 3
    If Safari still doesn’t work right, quit, go back to the Finder and move the following items from the open Library folder to the Desktop (some may not exist):
    Cookies/Cookies.binarycookies
    Preferences/com.apple.Safari.LSSharedFileList.plist
    Preferences/com.apple.Safari.plist
    Preferences/com.apple.Safari.RSS.plist
    Preferences/com.apple.WebFoundation.plist
    PubSub/Database
    Safari
    (Note: you are not moving the Safari application. You’re moving a folder named “Safari.”)
    Try again. This time Safari should perform normally, but your settings and bookmarks will be lost.
    If the issue is still not resolved, quit Safari again and put all the items you moved to the Desktop back where they were, overwriting the newer ones that will have been created in their place. You don’t need to replace the files you deleted in step 1. Stop here and post again.
    If Safari is now working normally (apart from the lost settings), look inside the “Safari” folder on the Desktop for a file named “Bookmarks.plist”. Select File ▹ Import Bookmarks from the Safari menu bar. Import from that file. Recreate the rest of your Safari settings. You can then delete the items you moved to the Desktop.
    Note: This step will remove your Safari Extensions, if any, and their settings. If you choose to restore them, do so one at a time, testing after each step to make sure you haven’t restored the problem.
    If you don’t like the results of step 3, you can undo it completely by quitting Safari and restoring the items you moved or deleted in that step from your backup, overwriting any that were created in their place.

  • How to keep Folder Windows From Opening When Turning On System

    I have a couple hard drives connected to my APExtreme. When I turn on my Mac Mini it mounts the drives correctly and shows them on the desktop. It also opens windows for each drive. How do I keep these windows from opening?
    Thanks!

    Uncheck this when shutting down:

  • How to replace title bar from image

    Respected Sir/Madem,
    please help me, how we replace title bar of farme from image.and also that image have button like minimiz,restore,and close.
    i want to completely replace my title bar to a image for example NeoPlanet browser.
    plz givehelp.

    Frame.setUndecorated()

  • How to keep homesharing active from iTunes on Lion OS?

    I have 4 Macs (w MBPs, 1 iMac, 1 Mac Mini) and 2 Apple TVs (latest). Only the Mac Mini is on Lion OS (10.7.4) since that is what it came with new. I use it to serve my media to the Apple TVs, but they can also get served from the other 3 Macs (all on Snow Leopard 10.6.8).  Only the Mac Mini on Lion drops homesharing when not in use - the other Macs on Snow Leopard keep homesharing alive. While it is actively streaming, the Mini does not drop the feed.  I have the Mac Mini set to never go to sleep or or to screen saver, so it should remain accessible via homesharing.  But if I don't use it for an hour or two, it drops out of homesharing - and it is the only Mac to do so.  I can get it back by quitting then restarting iTunes or by shutting down homesharing and restarting it while keeping iTunes open.  Of course, a restart of the mini would also bring back full functionality.  None of these are acceptable when you are sitting in another room trying to access media via Apple TV.  As a result of the above, I am assuming that the problem is isolated within Lion OS and how it supports iTunes.
    I have seen other discussions claiming Apple TV drops out, but my problem is definitely the Mac Mini on Lion since at the same time I can see it drops from the other Macs and not just from Apple TV - all homesharing devices lose sight of the Mini but keep seeing each other.
    I'd love to downgrade my Mini to Snow Leopard but apparently can't. I'd buy an older used Mini, but I need HDMI - so, I'm stuck until this is fixed. My other devices will definitely stay on Snow Leopard until I see this problem resolved by Apple.
    Any suggestions on how to keep homesharing alive with iTunes on Lion?

    Everything that is on your ipod should also be on your computer.  is it not?
    You can redownload some purchases:
    Downloading past purchases from the App Store, iBookstore, and ...

  • How do I prevent Elements from launching when I connect a flash drive?

    When I connect a flash drive or SD card to my computer, Photoshop Elements automatically launches a component to save and organize my photos. I already have a system in place to organize my pictures so do not want to use the one from Elements. How do I prevent the program from launching automatically?

      On Windows go to the Control Panel >> AutoPlay
    And change your settings to “Always Ask” for photos and videos and save.
    If your camera, phone or other devices are listed at the bottom you can also change those settings.
    Click to view

  • How to keep .tag-files from accessing request?

    How can i keep .tag-files from accessing the request? I only want to allow the .tag-file access to parameters given to it as input attributes.

    Don't use the request object then.
    People on the forum help others voluntarily, it's not their job.
    Help them help you.
    Learn how to ask questions first: http://faq.javaranch.com/java/HowToAskQuestionsOnJavaRanch
    (Yes I know it's on JavaRanch but I think it applies everywhere)
    ----------------------------------------------------------------

  • How to keep a subject from being affected by a mask

    i have a shot in an office where i have a subject walking in front of some really bright windows.  i added an adjustment layer and made 6 mask squares over the windows and brought down the brightness a bit.  of course when the subject walks in front of those windows you can see the shaded mask on him.
    im not sure what you call it but what do i do to him to keep the mask from showing on him? 
    not sure if i should make another thread but ill ask this as well in here...in the same shot because of the bright windows originally the rest of the scene inside the office is dark.  how do i brighten the rest of the scene without affecting the windows?  i tried duplicating the adjustment layer with the 6 masks and inverting them so i can brighten everything but windows but no matter what i did i couldnt get it to work. 
    TIA

    think layers... you need to separate the person from the background on another layer with an animated mask. This is called Rotoscoping. RotoBrush is a tool that may work.
    Same thing for your second question, LAYERS, not duplicate adjustment layers, but duplicate your scene, do your masking, apply adjustments and you will be OK.

  • How can I prevent iPhoto from launching when I insert an SD card

    I recently upgraded to a new iMac retina and am having trouble disabling iPhoto from launching when an SD card is inserted.
    I have gone to iPhoto setting and disabled iPhoto from launching when a camera is connected.
    I have also gone into image capture and selected no application as the hidden option for SD card actions when inserted.
    Unfortunately the issue persists... two questions: can I do a terminal level disable to prevent iPhoto from launching or can I remove iPhoto from my computer?

    Have you tried this?
    Open the Image Capture app
    Select your SD Card
    Click the little widget in the bottom right corner of the window
    Select the program to launch, or "No application"
    it worked for me

  • How to remove application icon from launcher..

    I want to remove application icon from launcher..
    So, i removed tag <category android:name="android.intent.category.LAUNCHER"/> in intent-filter..
    <application android:enabled="true">
              <activity android:excludeFromRecents="false">
                        <intent-filter>
                                  <action android:name="android.intent.action.MAIN"/>
                        </intent-filter>
              </activity>
    </application>
    but it's not work.. occur installing below error..
    3496 KB/s (42965 bytes in 0.012s)
            pkg: /data/local/tmp/AirTest.apk
    Failure [INSTALL_PARSE_FAILED_MANIFEST_MALFORMED]

    I have same problem with you but I haven't find an answer for that. Did you have your answer for the problem?
    Thanks!

  • How do I stop iPhoto from launching every time I sync my iPhone?

    I have looked for something in Preferences on both my iPhone's PHOTOS tab as well as in iPhoto but cannot find where to tell whatever I need to tell to stop iPhoto from launching automatically every time I hook up my iPhone to my Mac to sync. This is really annoying and I'd so much rather just handle anything like that via the iTunes interface vs. another window/program that has to operate to deal with stuff on the iPhone. It's INelegant at best and just simply a pain in the arse at worst.

    You mean I can use this Image Capture thing for moving stuff from scanners as well?
    You bet. Some don't prefer using iPhoto to store all imported digital camera photos or any such application (not sure why but to each his/her own) so Image Capture can be used instead which is a simple import/transfer application. Using Image Capture, you can download some or all, remove photos from the camera after the download process, select a default download location or create a new folder in the location of choice and use a chosen automatic task such as crop to a 4' x 6' which occurs after the download process is complete.
    A nice simple little application which has some juice for those who don't like using iPhoto or similar type application.
    I'm in the habit of rooting around the applications folder and utilities folder with a new Mac purchase so I was aware of Image Capture but I've always preferred using iPhoto for my digital camera import process.

  • How do I stop photos from launching when I plug in camera

    Can't find anything in the preferences that will stop this new app from launching when I plug in cameras or phones.

    Plug in and let it load, then click on the camera/phone on the left hand pane and uncheck the box:
    You should also be able to do this via Image Capture (in the Applications Folder) but I haven't tested it specifically.

Maybe you are looking for

  • How can we get Dynamic columns and data with RTF Templates in BI Publisher

    How can we get Dynamic columns and data with RTf Templates. My requirement is : create table xxinv_item_pei_taginfo(item_id number, Organization_id number, item varchar2(4000), record_type varchar2(4000), record_value CLOB, State varchar2(4000)); ins

  • How to delete an imported photo album from IPhone when the computer used is no longer in my possession

    I imported some photos from my macbook to my iPhone. I no longer need them and I can't figure out how to remove them from my phone. I no longer have the laptop that I imported these photos from. Thanks for your help

  • How to find multiple entries in the Directory

    Hi, my directory contains lot of multiple entires and I want to find out is there a easier method by a script or command to find out all the mutiple entries in the directory. Thanks!! Message was edited by: Sun_One@TCS Message was edited by: Sun_One@

  • Count of Email by Sender from Outlook folder

    Is am new to writing VBA code , I would really really appreciate if anyone can help me with a VBA macro that can do the job of counting all emails by the sender's email address , within a particular Outlook folder. If the count of emails from a parti

  • What Drive is in my Portable?!

    I tried all mentioned methods, but as I had figured, I only got info returned based on "Helium2" "Iomega" & "USBSTOR". So I decided to just go ahead and disassemble to see if I got a good drive or not. It turned out that it wasn't that bad to disasse