How to Keep Custom Brushes in the Brush Panel Flyout Menu?

So I have a set of brushes that I mostly commonly use. However, I still use other brushes on occasion. When I load those brushes, my custom brush set doesn't stay in the flyout menu and I have no choice but to find the brush file and reload it. Every time.
It's getting to be a pain in the butt, so I'm wondering if there is a way to permanently keep your custom brush set in the flyout menu of the brush panel I've attached a screen shot in case what I wanted wasn't quite clear! I want my custom brushes to go where the green area is point.
Also I'm running a Japanese version of PS, but I'm pretty sure almost all the menu places remain the same. I translated some of the menu (although it might not be the exact same as the US CS6, but if you give me instructions, I'm pretty sure I can figure it out!)

Thanks! You're a life saver
iPhoneから送信
2014/10/31 16:16、R_Kelly <[email protected]> のメッセージ:
How to Keep Custom Brushes in the Brush Panel Flyout Menu?
created by R_Kelly in Photoshop General Discussion - View the full discussion
Looks like you using mac os x?
There are two places you can put your brush presets file:
1. /Macintosh HD /Applications/Adobe Photoshop CS6/Presets/Brushes
2. /Users/User Name/Library/Application Support/Adobe/Adobe Photoshop CS6/Presets/Brushes
The difference is that the ones in the cs6 application folder show in your red area and the ones in the library show up below the red area with a separator line
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6886054#6886054
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop General Discussion by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Similar Messages

How do I select a square brush for the brush tool in CS6? Sorry if this is a simple question, but nothing has ever been simple for me in Photoshop.

How do I select a square brush for the brush tool in CS6? Sorry if this is a simple question, but nothing has ever been simple for me in Photoshop.

I don't believe there is a square brush among the sets that ship with Photoshop, but there are plenty to download, and it is super easy to make one.
Just drag with the rectangular Marquee tool, fill with black on a new layer, and go Edit > Define brush preset
Browsing Photoshop Brushes on DeviantArt

How to keep customer Pattern/Die Equipment in our plant without value

Hi!
Anybody help me to sort out my problem. The scenario is,
How to keep customer Pattern/Die Equipment in our plant without value
1.My client manufacturing material (A), which is used to produce actual finished goods (B). First material (A) is produced and sold to customer due to the high cost of the material. I followed standard sales order process to sell material (A). (But actually that material is not delivered to the customer, we just deliver it only in the system)
2. Then the same material (A) is to be brought in to the plant as customer material. It wont be included in the value of the plant, because it is customers property lying in our plant to produce actual finished goods (B). How to inward the material in to our plant?
3. Pattern/Die material has periodical maintenance to be done by my client. How do we process this in SAP? (Because that material is not our asset or work centre)

Hi,
You have two main options,
Either you receive the material as a non-valuated item (you can use a PO and zero price if you want, or create a new material for it). The problem with this is that if you use Moving Average Prices and don't use a new material it will corrupt the MAP. If you use a separate material then this would be the preferred option.
If you can't use a separate material (i.e. one that is different from the material used to sell it to the customer) then I would use the second option.
The secomd option is to bring the item in as Vendor Consignment stock. This is stock available to use but has nop value until you consume it. The problem with this option is, if you consume the item (in a PP order or goods issue to your own stock or similar) the system will post a liability to the vendor which it will expect top be paid.
So a lot depends on the detailed process you are planniong to use and if it is a separate material master record.
Steve B

How to keep data integrity with the two business service in OSB 10.3.1.0

How to keep data integrity with the two business service in OSB 10.3.1.0
In our customer system, customer want to keep data integerity between two businness service. I thinks this is XA transaction issue.
Basing customer requirment, I created a testcase but I can't keep data integerity, For detail information, please refer the attached docs.

Can you please explain what you meant my data integrity in your use case?
Manoj

How to keep your email on the server after deleting from the phone?

how to keep your email on the server after deleting from the phone?

If this is a POP mail account:
Settings > Mail.... > Your account > Advanced > Delete from server > Never.
However, this will risk re-downloading as new mail
IMAC accounts mirror what's on the phone in the server, so deleting from the inbox on the phone will either send it to the trans folder on the server or leave it in the inbox but marked as deleted (depending on the server)
Settings > Mail.... > your account > Advanced > Deleted Mailbox > On My iPhone Trash

How to Including custom text in the step "User Decision"

Hi All
Please help me in this regards I got problem
How to Including custom text in the step "User Decision"
Regards
Poonam
Edited by: Julius Bussche on Feb 2, 2009 1:59 PM
Please use the corect forum, meaningfull subject titles and use the search before asking questions

Hi Poonam,
If I understood your problem correctly...
When you create a user decision a screen will appear.
In the decision tab under Title you can give your custom text.
Even if you want to give some variable (value of which will be determined at runtime) you can give that as well.
Like you have created a container for BOR objects MAT_DETAIL, in that object there is a field MATERIAL.
You can define your custom text as below:
Title: Would you like to create new material or display material &
Parameter 1: &MAT_DETAIL.MATERIAL&;
In Title you can give as max. as 4 &(ampersand). And each & will be replaced by each Parameter at runtime in same sequence.
In parameters you use to select the container defined by you earlier.
Hope this will help.

How do you remove items from the assets panel that are duplicated?

How do you remove items from the assets panel that are duplicated?

If you add an item to a slideshow, you'll usually see 2 entries for that image in the assets panel - one represents the thumbnail, and the other represents the larger 'hero' image.
It sounds like you may have added the same image to your slideshow twice. You can select one of the hero images or thumbnail images in your slideshow and use the delete key to remove it. Then the extra 2 entries in the assets panel should disappear.

HT2500 Does anyone know how to remove a group from the address panel in mail?

Does anyone know how to remove a group from the address panel in mail?

I haven't seen too many questions like this on this forum. Did you also try the photoshop forums?

Why does LR5 Beta Keeps crashing when using the brush?

When i use the brush LR5 beta keeps crashing. I have Windows 7 OS. LR5 beta crashes when I am working with the brush on an image. I have to close and re open, but with brush it just crashes again either on the same image or working on another image. Any ideas please?

LR 5 has been released. Please update to the release version and try again.
Download here.

How to add custom fields to the sap standard program ukm_bp_display

How to add new custom fields to the sap standard program ukm_bp_display .
could u please any one help me on this?

Hello Kumar,
You have to modify below structure, as this structure is providing the field catalog for output display (ALV).
Here you can see there are a lot of include structures, so if you want to add fields in the output display you can add those fileds as an append structure to any of the below mentioned structures (Like ukm_s_account, ukm_s_bp_cms_sgm etc as per your requiremnt and positon at which you need to dispaly your fields.)
DATA: BEGIN OF gt_grid_alv OCCURS 0.
       partner LIKE but000-partner,
       credit_sgmnt LIKE ukmbp_cms_sgm-credit_sgmnt.
        INCLUDE STRUCTURE ukm_s_account.
        INCLUDE STRUCTURE ukm_s_bp_cms_sgm.
DATA:   credit_sgmnt_txt LIKE ukmcred_sgm0t-credit_sgmnt_txt.
      Gruppe Vector
        INCLUDE STRUCTURE ukm_s_bp_vector.
      Gruppe OBL = Obligo
      include structure UKM_S_BP_CMS_MALUSDSP_OUT.
        INCLUDE STRUCTURE ukm_s_display_segment.
        INCLUDE STRUCTURE ukm_s_bp_cms.
        INCLUDE STRUCTURE bus000_dat.
*DATA:   icon(4).
      Gruppe RAST (Raster)
DATA:
         rast01 LIKE ukm_s_display_segment-AMOUNT_GRID,
         rast02 LIKE ukm_s_display_segment-AMOUNT_GRID,
         rast03 LIKE ukm_s_display_segment-AMOUNT_GRID,
         rast04 LIKE ukm_s_display_segment-AMOUNT_GRID,
         rast05 LIKE ukm_s_display_segment-AMOUNT_GRID,
         rast06 LIKE ukm_s_display_segment-AMOUNT_GRID.
DATA:    rast2_6 LIKE ukm_s_display_segment-AMOUNT_GRID.
"Summe raster 2 bis 6
DATA: END OF gt_grid_alv.
Another way is you can go to SE38, and you can create implicit enhancements.One enhancement point is available here in this required area. so create an implementation and add your fileds with data types.This way is also simple.
Hope this will solve yiour problems.
Regards,
Antony Thomas

Does anyone know how to keep all songs in the same album when they say featuring someone?

Each time I load a CD onto Itunes that has an artist who features another artist on that particular song, it puts it in my library as a separate CD even though it will have the same album listed. For instance Lady Gaga's song just dance features Colby O'Donnis that song is in its own spot while the rest of the cd is together that one song is separate and I don't know how to keep them all together. Someone help.

Get the Informations for that song and have a look in the "Sorting" area if there is something different. The data inserted there is just for how iTunes will order the songs.
If the Interpret in the general informations is "Lady Gaga" and in the sorting area is "Lady Gaga feat. xxxx" than you'll see Lady Gaga as the interpret but it's sort to a second entry "Lady Gaga feat. xxxx".

How to add Custom Attributes in the SOAP header for OWSM

Hi,
I like to know how to add the Custom Attributes in the SOAP header for OSWM username token authentication.
Currently we are getting the header element like
<wsse:Security xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd" xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">
here we need to add the attribute "soap:mustUnderstand="1" , so the element will look like
<wsse:Security soap:mustUnderstand="1" xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd" xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">
Any info on this will be helpful.
Thanks,
ArunM

Hi Jay, you can make it in more than 1 way.
I suggest you the following:
- create an URL iview that points to any URL you want.
- define a Resource that points to the iview (with a window name, to open in new window)
- define an Area that points to the resource
- add your new Area to the your current Area Group
Regards!

How to pass custom parameters to the Notification message body in a process

Hi All,
We are migrating from ORACLE workflows to Oracle OWB process flows as part of upgrade to Oracle 11g R2. Earlier in workflow notification mesages we could attach custom attributes (eg X_NAME) and reference the custom attributes in the notification message body (&X_NAME) to dynamically build the message body as per the custom attribute values.
I tried to add a cutom parameter X_EMAIL_ID to a OWB process notification activity and trying to pass it to the notification message body by giving the value "This message is from &X_EMAIL_ID" in TEXT_BODY. But when I get the notification message it shows only "This message is from" and it does not show anything about X_EMAIL_ID.
Please advise Please help us if anyone have used any workaround to dynamically populate the TEXT_BODY in a notification activity based on custom parameters.
Thanks and regards,
Shankar

Hi David,
Thank you for your suggestions. When I try to bind the variable to the notification activity parameter TEXT_BODY I get this error - VLD-10035: The value of parameter TEXT_BODY in a NOTIFICATION activity must be a literal value, bindings or expressions are not allowed. It looks like the text_body can have only literal values. Could you please advise if you received any such error or how could you resolve them.
Thanks and regards,
Shankar

How to replicate customer fields in the backend system.

Hi All,
I need to transfer PO customer fields that were created in the SRM system to backend SAP system.
I am using Extended Classic Scenario in SRM and SRM Version is 5.0.
I am able to replicate the data created in SRM system to the backend.
How ever, I found the following BADI while debugging.
1. BBP_DOC_SAVE_BADI
2. BBP_CTR_RELVAL_ICC
3. BBP_DOC_SAVE_ICC
4. BBP_F4_SAVE_DB
5. HRSYNC_P
Hence, please tell me which BADI, I need to use to send my customer fields to the backend system.
Regards,
Venky.

Hi
As Disha told, You need to create a customer Implementation of any othe BADIs using SE19 Transaction.
Say, you create an active customer Implementation of BBP_ECS_PO_OUT_BADI...
See links given in earlier reply for detailed sample code.
Write the following sample code (pls change it as per your business requirement)
METHOD if_ex_bbp_ecs_po_out_badi~bbp_b46b_po_outbound.
** Customer fields
MOVE 'POHEADER' TO w_customer_fields-refobject.
*PO approver
MOVE 'ZZAPPROVER' TO w_customer_fields-fieldname.
MOVE is_header-zzlastapprover TO w_customer_fields-container.
APPEND w_customer_fields TO ct_bapi_customer_fields.
*SC Date
MOVE 'ZZSCDATE' TO w_customer_fields-fieldname.
MOVE lv_scheader-created_at TO w_customer_fields-container(15).
APPEND w_customer_fields TO ct_bapi_customer_fields.
*Requester Org
MOVE 'ZZORGA' TO w_customer_fields-fieldname.
MOVE w_requester_orgunit TO w_customer_fields-container.
APPEND w_customer_fields TO ct_bapi_customer_fields.
endmethod.
BBP_PO_INBOUND_BADI in R/3.
method IF_EX_BBP_PO_INBOUND_BADI~BBP_MAP_BEFORE_BAPI.
data wa_customer_fields TYPE BBPS_IF_CUSTOMER_FIELDS.
data : WA_BAPI_TE_MEPOHEADER type BAPI_TE_MEPOHEADER,
WA_BAPI_TE_MEPOHEADERX type BAPI_TE_MEPOHEADERX.
data WA_EXTENSIONIN TYPE BAPIPAREX.
data txt_960(960) type c.
*** EKKO Customer fields.
*PO Number
move BBP_POHEADER-PO_NUMBER to WA_BAPI_TE_MEPOHEADER-PO_NUMBER.
move BBP_POHEADER-PO_NUMBER to WA_BAPI_TE_MEPOHEADERX-PO_NUMBER.
*ZZAPPROVER
READ TABLE BBP_CUSTOMER_FIELDS INTO wa_customer_fields
WITH KEY refobject = 'POHEADER'
fieldname = 'ZZAPPROVER'.
IF SY-SUBRC EQ 0.
MOVE wa_customer_fields-container TO WA_BAPI_TE_MEPOHEADER-ZZAPPROVER.
WA_BAPI_TE_MEPOHEADERX-ZZAPPROVER = 'X'.
endif.
*ZZSCDATE
READ TABLE BBP_CUSTOMER_FIELDS INTO wa_customer_fields
WITH KEY refobject = 'POHEADER'
fieldname = 'ZZSCDATE'.
IF SY-SUBRC EQ 0.
MOVE wa_customer_fields-container TO WA_BAPI_TE_MEPOHEADER-ZZSCDATE.
WA_BAPI_TE_MEPOHEADERX-ZZSCDATE = 'X'.
endif.
*ZZORGA
READ TABLE BBP_CUSTOMER_FIELDS INTO wa_customer_fields
WITH KEY refobject = 'POHEADER'
fieldname = 'ZZORGA'.
IF SY-SUBRC EQ 0.
MOVE wa_customer_fields-container TO WA_BAPI_TE_MEPOHEADER-ZZORGA.
WA_BAPI_TE_MEPOHEADERX-ZZORGA = 'X'.
endif.
CLEAR txt_960.
CLEAR WA_EXTENSIONIN.
write WA_BAPI_TE_MEPOHEADER to txt_960 left-justified.
WA_EXTENSIONIN-STRUCTURE = 'BAPI_TE_MEPOHEADER'.
WA_EXTENSIONIN-VALUEPART1 = txt_960(240).
WA_EXTENSIONIN-VALUEPART2 = txt_960+240(240).
WA_EXTENSIONIN-VALUEPART3 = txt_960+480(240).
WA_EXTENSIONIN-VALUEPART4 = txt_960+720(240).
append WA_EXTENSIONIN to BAPI_EXTENSIONIN.
CLEAR txt_960.
CLEAR WA_EXTENSIONIN.
write WA_BAPI_TE_MEPOHEADERX to txt_960 left-justified.
WA_EXTENSIONIN-STRUCTURE = 'BAPI_TE_MEPOHEADERX'.
WA_EXTENSIONIN-VALUEPART1 = txt_960(240).
WA_EXTENSIONIN-VALUEPART2 = txt_960+240(240).
WA_EXTENSIONIN-VALUEPART3 = txt_960+480(240).
WA_EXTENSIONIN-VALUEPART4 = txt_960+720(240).
append WA_EXTENSIONIN to BAPI_EXTENSIONIN.
endmethod.
Hope this will help.
Regards
- Atul

How to add custom field to the task via CSOM?

Hello!
I'm trying to add custom fields to my programmatically created task in project 2013. Tasks are created. Then I get them and load custom fields by:
DraftProject projCheckedOut = tstProj.CheckOut();
projContext.Load(projCheckedOut.Tasks);
projContext.ExecuteQuery();
foreach (var task in projCheckedOut.Tasks)
projContext.Load(task.CustomFields);
projContext.ExecuteQuery();
But the each CusomFieldCollection object has only 1 field (Health, because it have a default value and created automatically). But when I load my project in Project professional i saw more than 1 field, but they are empty.
Then I tried to add a new custom field to each CusomFieldCollection of each task.
var newField = new CustomFieldCreationInformation();
newField.FieldType = CustomFieldType.TEXT;
newField.Name = "F_1";
newField.Description = "test description";
task.CustomFields.Add(newField);
task.CustomFields.Update();
New field added to the collection, but when I update the project and publish it nothing is happened.
How to add a custom field to the each task and set it value?
Or how to attach enterprise task custom field to my tasks.
I'm using Microsoft.ProjectServer.Client.

Hi
Hope the below posts are of some helpful for you
http://social.msdn.microsoft.com/Forums/en-US/d79f22f2-7fd2-46af-b778-e189c8611120/use-csom-to-update-projects-custom-fields?forum=project2010custprog
http://msdn.microsoft.com/en-us/library/microsoft.projectserver.client.project.setcustomfieldvalue.aspx
Thanks
Geeth
Geeth If you feel that the answer which i gave you is Helpful please select it as Answer/helpful.

How to Keep Custom Brushes in the Brush Panel Flyout Menu?

Similar Messages

Maybe you are looking for