How to keep data that is in Palm Desktop

I have more than 10 years of data in Palm Dekstop and my Palm Vx.  The Palm Vx is getting pretty shaky.  What options to I have to replace it without losing my data?
Post relates to: Palm Vx

You can replace the handheld with another model and when you do you will need to change the hotsync conduits to desktop overwrites handheld and then sync your data. Before you sync I would suggest the procedure below for backing up your data. This procedure will not export any categories you have setup in Palm desktop.
The best way to preserve your data is to export the data in each component in Palm Desktop to a seperate folder on your PC.
Create a new folder on your PC somewhere that is convenient. Name it something like Palm Desktop Data. Click on the link below and follow the instructions on that page for the export procedure.
http://www.palm.com/cgi-bin/cso_kbURL.cgi?ID=28734
Make sure you select all for the range in the export window.
With the data saved in the folder you created, make a copy of that folder and save to a flash drive, cd-rw or external hard drive.
Anytime you make a change in Palm Desktop, export the data that was changed to that folder and save again to the external media.
With this process you can always import the data back into Palm Desktop anytime you have a problem with the data in Palm Desktop or if your computer/hard drive/device crashes.

Similar Messages

  • How to keep data in sleep mode

    Dear All
    Any one guide me, " How to keep data in sleep Mode". My data will be in database but it will not active when Oracle server start up.
    i am using oracle 10g r10.2.1 with window server 2003.
    Hope full response will be appreciated.
    Regards,

    some one New wrote:
    Dear All
    Any one guide me, " How to keep data in sleep Mode". My data will be in database but it will not active when Oracle server start up.
    i am using oracle 10g r10.2.1 with window server 2003.
    Hope full response will be appreciated.
    Regards,That's a very new term and AFAIK, there is no such term within Oracle. The data doesn't need to be active or inactive. Its just there when the database comes up and as long as you don't access it, it just stays there. What you can do is either to make the tablespace offline so that the data is not accessible at all or make it read only so that its not modifiable at all.
    But still, as Pierre asked, you may want to tell us exactly what you want to do.
    Aman....

  • How to keep data integrity with the two business service in OSB 10.3.1.0

    How to keep data integrity with the two business service in OSB 10.3.1.0
    In our customer system, customer want to keep data integerity between two businness service. I thinks this is XA transaction issue.
    Basing customer requirment, I created a testcase but I can't keep data integerity, For detail information, please refer the attached docs.

    Can you please explain what you meant my data integrity in your use case?
    Manoj

  • How to keep date time line in  collected alert message in linux platform

    Hi Friends,
    In linux server for 11g oracle. how do I keep date time line for each error message?
    example as
    cat alert_test.log | grep 'ORA'
    grep 'ORA' alert_test.log
    I like output as
    Mon Aug 20 01:54:29 2012
    ORA-01560 caused by SQL...........
    I know we can use diag... But I want to some linux command for my debug.
    Thanks
    newdba

    Another option is to make your alert log accessible as an external table.
    Demo here:
    http://www.morganslibrary.org/reference/externaltab.html
    Find "alert log" on the page. Add a numeric column to the table and create a sequence and you can put in a surrogate row number that will allow you to pull sections using LEAD and LAG as you please.

  • How to keep date format as dd/mm/yyyy in Agentry independent of backend value format?

    I am using Agentry 6.0.38.1 android client and 6.0.32 plugin.
    I want to keep date format as dd/mm/yyyy in Agentry independent of backend value date format.
    How can I do it?
    Regards
    -Prit

    Jason/Sravanthi
    When I log in with 6.0.38.1 android client, I get date format in dd/mm/yyyy independent of device date format (I checked by changing device date format) and when I log in with 6.0.30.x android client, I get date format in mm/dd/yyyy independent of device date format for the same export to same connection.
    Don't know why this is happening.
    Sravanthi,
    The solution you suggested didnt work
    Regards
    Prit

  • How to handle data that got from SAP by Webservice?

    Hi, Gurus.
    I am working on IFbA with ABAP and Adobe LiveCycle Designer.
    I've developed a function module in R/3 system and created webservice, connected the WSDL address to the form. The problem is how can i handle data that got from SAP by Webservice?
    It's Ok if i bind the dataconnection node to the form element, but how can i handle data without binding to the form element? I mean that how can i use the data retrieved from Webserivce in the Javascript, please give me some sample code or script method.
    Thanks.

    Hi Yang,
    If you are using Web Service, then the binding will be done automatically.
    It can't grow automatically, what else should i do to achieve this?
    1.Select the table(make sure you are not selecting subform) in Hierarchy view
    2. Under table select the Row which is having the required fileds for data
    3. In the Binding of that row, check the checkbox "Repeat Row for each item data" and under that check the Min Count which will set the default row **** to 1
    Regards,
    Sachin

  • How to keep data on ipod touch safe.....

    I have lost ALL data on my laptop and thus have to re-install i-tunes. When i sync again for the first time to an ampty i-tunes, will i lose my data that is alrady on my ipod, or will that data be send to my i-tunes?

    check this post by Zevoneer.
    JGG

  • How to recover data that are accidentally backed up with another backed up program?

    I went to sync my Iphone and itunes began to 'restore' it. After it finished restoring, I unplugged it and everything since last month has been deleted( my text messages, pictures, new contacts, etc.) It is very frustrating! how do I get that stuff back? It's really IMPORTANT!!!! PLEASE HELP!

    iTunes: About iOS backups - http://support.apple.com/kb/HT4946 - including a list of what is backed up.
    How to Restore iPhone From Backup - http://ipod.about.com/od/iphonetroubleshooting/ss/restore-iphone.htm
    Restore iPhone from older backup - https://discussions.apple.com/thread/3333725

  • How to print day per page on Palm Desktop?

    I have a .dba Palm DateBook file taken off a Palm Treo 650 phone.  I would like to print the calendar entries with the entries for one day per page.  However the Palm Desktop software appears to only provide for one whole month to be printed on a single page.  Does anyone know how I can print the calendar entries for a particular day on a single page?
    Post relates to: Treo 650 (Unlocked GSM)

    Open Printers & Scanners. Select the HP. Click on Open Printer Queue. From the menubar, click on the Printer menu and then select Print Test Page.

  • New Mac, how to keep Date Added info in new iTunes

    Yesterday I bought a new iMac, replacing my older one.
    I have 66GB of iTunes Music & Videos which I saved on an external hard drive. I copied the "iTunes" folder from my Mac onto the hard drive.
    I know I can just drag the folder into iTunes on my new Mac, but I would lose all the "date added" and "play count" information. I see that in the iTunes folder I saved, there is an "Album Artwork" folder, an "iTunes Library database file", an "iTunes 4 Music Library database file", an "iPod Games Library database file", and an "iPod Games" folder.
    Does the iTunes Library database file contain all the information? Because I tried to replace that file with the current one on my new Mac, and when I opened iTunes, all my songs, playlists, and data added information was there, but all the songs had an exclamation mark beside them. So then I dragged the iTunes folder into iTunes but then I had doubles of each thing.
    So my question is, how can I import my music by keeping the Date Added, Play Count, and playlist information?

    Normally if you want a trouble free move, all your music files must be in the iTunes Music folder as designated in the preferences.
    However if you music is on an external drive and the full path to the music files will NOT change, this is no essential. iTunes cannot tolerate any change to the path to music files that are not in the iTunes Music folder. If the files are in the iTunes music folder, it can tolerate changes to the path above the level of the iTunes Music folder.
    All the data on playlists, count, ratings is in iTunes Library.itl which by default is in ...My Music\iTunes assuming you haven't moved it. This iTunes folder also contains your album artwork, so you need to save the whole folder.
    When you have iTunes installed and working and before you add any more music, you will need to replace the iTunes folder created by the new installation of iTunes with your original iTunes folder and ensure the path for the iTunes Music folder is correctly set in the preferences.
    Because it sounds as though you have a somewhat non standard arrangemnt, I can't be sure that what I have said is exactly right but I hope I have given you neough to sort it out.

  • Master collection CS4, how to keep "Date taken" in captured videos?

    Hello,
    I have the master collection CS4 on a Vista system, and I can easily capture from my old Canon Elura DV tapes, with a firewire cable, either using Premiere Pro, or the simple Windows capture utility.
    Now, no matter what file format I created, both AVI (big) and WMV (smaller) the files' "Date Taken" or "Date Shot" fields are blank. All Date modified/created and accessed are the date of the capture, which I do not really need, since my tapes are 8 years old... !
    Windows Photo Gallery sorts your photo and videos by date taken, but this does not seem to be possible with captured DV videos...
    Now, it seems such a simple feature to have the DV date/time stamp to be translated into the file "Date Taken" field, I am wondering how to do that.
    Is there a plugin? Is there a workflow I am missing in premiere? or AfterEffects?
    The date/time stamp is embeddded in the DV stream, and I read that a AVI capture will simply copy the DV stream to the HD, so how do I extract / see that information?
    And, really, how come such a critical information is so hard to work with? I mean, don't professional movie makers want to know precisely when video clips have been shot?
    Thank you
    regards

    Hi,
    hmm, I use SCLive to capture and the filename becomes the date taken and are numbered sequentially...as it can capture different avi files every time it sees the camera was shut off and turned back on...like those become "scenes" in a way..a new avi file.  But the date and numbers reflect what youre talking about.  I never captured using cs3 which is what I use.  SCLive is actually "better" at capturing mini dv tapes.
    As for movie making the slate gives you that info...and when you start the edit you rename the captured footage according to the slate..so the filenames reflect more readily what the stuff is...
    eg. " scene3-take3-cu " or "scene5-take2-master"...etc.

  • HT4623 how to retrieve data that was not backed up

    SOS!  Being a novice SmartPhone consumer, I tried to safeguard my data on my iPhone 4 only to lose all the data from the date of purchase, is there any way possible that the data (pictures and contacts) are not a total eternal lose? 
    Signed,
    Disperate in Cali

    mpg320 wrote:
    Today I completed a software update for my iPhone 5 without backing it up because I did not receive a warning that all my data would be erased and so, did not realize it would be an issue. Upon completing the update, I realized my mistake but figured it was too late to revert the damage and continued with the restoration of my phone to its factory settings.
    After completing the update, I realized just how much data was lost (including important notes with financial information and images and videos of recent trips around Europe). Now I am desperate to try to recover the data deleted in the update. Is there any chance at all that I can recover something? The notes and videos are most important to me. I am also missing many Messages but that is less important to me.
    Can anyone please help?
    Any response is greatly appreciated!
    Here's the official article from Apple on how to update your iOS.
    Update the iOS software on your iPhone, iPad, and iPod touch - Apple Support
    Before you update
    Back up your device to iCloud or iTunes.
    That's virtually the very first thing it says to do.
    There's no excuse to not have your data backed up prior to updating.  Tell me, what would you have done if, instead of this being an issue where you updated your iOS and had an error, if instead you had dropped your iPhone and it was damaged beyond repair, or if it was stolen or lost, etcetera.
    Perhaps you'd been backing up to iCloud and didn't realize it?  Maybe the missing Notes data is linked to a Mail account?  You might be able to reconstruct the data, but it's going to be an uphill battle.
    Best of luck.  Make sure to backup more frequently in the future.  There are two types of people in the world; those who have lost data, and those that will lose data.  The only difference is how prepared you are for that event.

  • How to keep data and music from iPhone4?

    My computer crashed and had to get a new one but I have a lot of songs on my iPhone4 that I'll like to keep and I also wanted to add more songs to my phone. I'm pretty sure backing up would not restore my music from my old computer. What can I do?

    Did you buy them from iTunes ?

  • How to keep data in session while changing webshop in ISA 4.0?

    Hi All,
    I have one requirement in my current project. We are showing Webshops in "categoriesB2C.jsp" file in "left" side. We have four webshop as below.
    1) Shop By Market
    2) Shop By Product
    3) Shop By Quick Ship
    4) Shop By Price.
    I am hiding webshop in "Categories.jsp" selected in "shoplist.jsp" now when I put some product in shopping cart or I login in B2C. and then click on any link of webshop which I have provided in "categoriesB2C.jsp" I am using below link
    "<a href="/b2b_virco/b2b/init.do?shopId=PRODUCT">" around webshop name in "categoriesB2C.jsp" if I use
    <a href="/b2b_virco/b2b/readshop.do?shopId=PRODUCT"> then I am getting error.
    Now I want to preserve my selection while changing the webshop.  right now it is changing the webshop but it is not preserving the data in "cart" and if I am login then it just throw me out and reset my selection in shopping cart.
    Any idea or any help is a great help for me.
    Thanks.
    Ashish Patel.

    Dr. Iman, thanks, but I made your suggested change and the same result applies. I removed the "Close File" vi from the loop and even wired a "False" boolean variable to the "Close When" port of the "Write to C" vi. The results from previous loops are still being over-written by later loops leaving only one loop of data by the time the vi is finished running.
    Any other ideas? I have attached the latest version of the vi that I am working on this.
    Attachments:
    Traverse_Alive_Triple_Bypass.vi ‏140 KB

  • How to restrict data that is displayed  in adf query

    Hi all,
    i have a VO with query criteria, which i have added to the jsf page as adf query panel with table. There may be particular queires that return large number of records. Suppose i want to restrict the number of records being displayed to 10,000. Is this possible with jdeveloper 11g? How can it be done? pls advice.
    Thnx,
    Nad

    Hi Nad
    You can do this, open the VO Editor go to sql statement option add this code inside the where clause:
    and rownum <= 10000 -- limit your query.
    Good Luck

Maybe you are looking for