How to keep figures at the top of the page.

Hi there
I have three figures which I have draw with Drawing tools.
The first figure I want to keep always in the middle of my first page.
Second figure I want to keep always on the top of my second page.
Third figure I want to keep always on to of my third page.
There position should not change even if I add few more paragraphs just before my first figure. How do I say OpenOfifice to keep the figure in place for me? I can do that in Latex. However, I am newbee in OpenOfifice .

My previous post is regarding OpenOffice Writer

Similar Messages

  • How do you rotate the PDF you created in Acrobat but keep everything on the page from rotating?

    How do you rotate the PDF you created in Acrobat but keep everything on the page from rotating with it?
    I made a very complex form, but have decided it would be best to have it as a portrait instead of landscape.
    Of course, when I rotate it, everything on the form is turned sideways.

    Assuming that you created the form fields in Acrobat and those were just imposed on top of a document that you created from another application you might try these steps:
    1. Create a new PDF in landscape from the original document.
    2. Copy the form fields from the previous document to the new document.
    3. Move the fields to the proper locations.
    At least I think this has a chance of working. You might give it a try on a single page or such.

  • How can I close out the page I am working on in safari when error boxes keep popping up?

    How can I close out the page I am working on in safari when error boxes keep popping up?

    What do the error messages say ?

  • How can i figure out the answers to my security questions if i forgot the answers

    how can i figure out the answers to my security questions if i forgot the answers

    Welcome to the Apple Community.
    Start here, and reset your password, you will receive an email with your new password, then go tomanage your account > Password and Security and change your security questions.
    If that doesn't help you might try contacting Apple through iTunes Store Support

  • My iphone got stolen. how do i figure out the emei number?

    my iphone got stolen. how do i figure out the emei number?

    Here is what you should do:
    http://support.apple.com/kb/HT5668
    And here is how to report the theft:
    http://support.apple.com/kb/HT2526

  • How to keep track of the users who are all currently logged in

    Hi All,
    I have basic knowledge of Session and Servlets. I am wondering how to keep track of the users who are all currently logged in. There should be some way of achieving it.
    I thought of it and come up with having an Application variable that hold it when ever a user successfully logged in.
    Thanks in advance for any reply.

    You can do this by keeping data in a static veriable in a some class of yours. The variable will need to be a collection.
    Whenever a user loogs in to the site a servlet/jsp should put the users information in to the collection and when logs off or when the session expires the entry should be take off.
    You can achive this by storing the velues in a some sort of a week collection where the entries are automaticaly removed when all the other refferences to the entry goes out of scope.
    You might need to read bit about java.lang.ref package and WeekReference
    Or you can make the entry in the collection contain the last time that the user visited any of the pages and a thread can run time to time and clean up the older entries which have timed out

  • How to keep track of the changes done in ALV GRID Report

    Hi Experts,
    how to keep track of the changed record in ALV GRID Report. how to set the field to be editable even for the entire row also. Can anybody guide along with code also?...
    Valuable answers will be rewarded.
    Thanks,
    Satish.

    Hi,
    Access the table through SM30. It comes blank as standard. Click "New Entries" and make entries for changes to be tracked. For example, whenever an org. unit changes 002 and 003 relationship, you will make entries like:
    01 O 1001 B002 Activate box checked
    01 O 1001 B003 Activate box checked
    Here, 01 is your active plan version, O is org. unit, 1001 is infotype and B002 and B003 are the subtypes. You can also use * for infotype and subtype which means every change will be logged.
    If you then run the report RHCDOC_DISPLAY through SA38, it will pick up all the changes pertaining to B002 and B003 relationship for org. units (in the above example).
    Similarly, you can set up this table for other object types.
    For more information, follow SPRO>Personnel Management>OM>Basic Settings>Activate change documents and go through the documentation for that node. Also, read up the documentation for the report.
    Hope this helps.
    Donnie

  • How to keep Track of the wagetype Changes

    Hi Experts,
    How to keep Track of the Changes after changing the wagetype values.If any body has made changes to the existing wagetype, how do we keep a track of what changes has done, is there any standard Tcode through  which we can get the information.
    Thanks in advance,
    Regards,
    Magesh.S

    Hi,
    Access the table through SM30. It comes blank as standard. Click "New Entries" and make entries for changes to be tracked. For example, whenever an org. unit changes 002 and 003 relationship, you will make entries like:
    01 O 1001 B002 Activate box checked
    01 O 1001 B003 Activate box checked
    Here, 01 is your active plan version, O is org. unit, 1001 is infotype and B002 and B003 are the subtypes. You can also use * for infotype and subtype which means every change will be logged.
    If you then run the report RHCDOC_DISPLAY through SA38, it will pick up all the changes pertaining to B002 and B003 relationship for org. units (in the above example).
    Similarly, you can set up this table for other object types.
    For more information, follow SPRO>Personnel Management>OM>Basic Settings>Activate change documents and go through the documentation for that node. Also, read up the documentation for the report.
    Hope this helps.
    Donnie

  • How to keep track of the sequence of the BSP Pages being invoked.

    Hi,
    How to keep track of the sequence of the BSP Pages being invoked.
    I have a BSP Page A.htm. There are two other pages B.HTM and C.HTM in the same BSP Application.
    The page B.HTM has a link A.HTM. The page C.HTM also has a link A.HTM. On clicking  these links the Page A.HTM would be invoked. Is there any way to keep track which BSP Page  (i.e B.HTM or C.HTM) invoked the page A.HTM.
    Any input on this Regard would be of great help.
    Thanks and Regards,
    Pavithra

    Hi Pavithra,
    Declare in page attributes:
    appl_url type string
    In the onClick event of the link that calls the A.htm page , use:
    call method runtime->get_url
    receiving
    URL = appl_url.
    Now appl_url contains the url (also name) of the page that invoked A.htm .
    Hope it helps.
    Anubhav.

  • I have an IPad with a Restriction code that we cannot remember.  Is it possible to delete and restore the IPad without the code?  If not how do I figure out the code or how t? o remove it?

    I have an IPad with a Restriction code that we cannot remember.  Is it possible to delete and restore the IPad without the code.  If not how do I figure out the code or how to remove it?

    The only option is to wipe the device clean and restore it to factory settings.  Hope you have a backup.
    Follow the instructions in  iOS: How to back up your data and set up your device as a new device http://support.apple.com/kb/HT4137 to restore the device to factory settings.
    Once you have setup the device as a new one, you can then sync it back with your iTunes account and all your music, apps, contacts and any other content sync'ed with iTunes will be loaded on the device. Any content that is stored only on the device and not sync'ed with iTunes, like app logins or data, will be lost during this process. Be forewarned that this is a long process and can take a couple of hours or more to complete. This can be painful, but it is necessarily so to prevent users from working around the security settings. After the restore is complete, you can setup a new Restrictions passcode. Make a note of the passcode to avoid this situation in future.
     Cheers, Tom

  • How do I figure out the size of an image in my iPhoto. How do I know if it is Kilobytes or megabytes. I assume Megabytes are larger than kilobytes and gigabytes are largest.

    How do I figure out the size of an image in my iPhoto. Soe applications require a certain size and I have no way of knowing what they are.
    Please confirm that Kilobytes are smaller than megabytes and gigabytes are the largest.

    You're correct, Kilobytes are smaller than megabytes and gigabytes are the largest.
    When you attach the images to an email, look on the bottom line for the total size of the email.  You can also change the image from Actual size to medium or small.

  • How can I open a new page (using "Pages") when I already have another page open?  It just keeps reverting to the page I have opened already and won't let me open another one?

    How can I open a new page (using "Pages") when I already have another page open?  It just keeps reverting to the page I have opened already and won't let me open another one?

    To make a new document, go to File > New From Template chooser and choose the type of document you wish to create.
    To add a new page to an existing document go to Insert > Sections > Blank.

  • When i save the PDF it saves it as secured.  How do i figure out the password?

    When i save the PDF it saves it as secured.  How do i figure out the password?

    Based on that comment, I would suggest you recreate the PDF from that app. Apparently there is something in the app that set the security. You would have to check with the app if security continues to be set as to the password. You might try a blank password or our OS password (but take care you are not sending your passwords out by way of some JavaScript).

  • When using my ipad air it keeps coming off the page I'm on or app and going back to the home screen. Also when using my ipad the screen will go white with a black apple icon in the middle for about 20 seconds then it makes a ping

    When using my ipad air it keeps coming off the page I'm on or app I am using and going back to the home screen. Also when using my ipad the screen will go white with a black apple icon in the middle for about 20 seconds then it makes a ping sound and goes to the home screen. Could anyone help please. Thank you :-)

    Read here:
    http://help.apple.com/ipad/8/#/iPad9a245e3e

  • How can I re-arrange the pages in a Pages document now?? I used to be able to click on the thumbnails and shift their position which is important in creating documents.  Any ideas?

    How can I re-arrange the pages in a Pages document now?? I used to be able to click on the thumbnails and shift their position which is important in creating documents.  Any ideas?

    This feature has been removed from Pages 5 along with over 90 others:
    http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&mforum=iworktipsn trick
    Pages '09 is still in your Applications/iWork folder.
    Trash/archive Pages 5 and rate/review it in the App Store.
    Peter

Maybe you are looking for

  • Generic file I/O error. Cannot save VI "filename.VI"

    Hi, I have LV 8.2.  I am having problems saving VI's after editing them.  I am getting the message: Generic file I/O error.  Cannot save VI "filename.VI" I can recreate the problem by creating a blank VI, placing a property node on the block diagram,

  • Oracle jdbc driver spending 40 seconds to make connection to Oracle db 11g

    we are using weblogic 10.3.3 and teh default Oracle11.1.0.7 Driver ojdbc6.jar to talk to Oracle db 11.2.0.1 After reviewing weblogic logs I see that it takes 50 secodns for each connection to db HHere is a snippet (note I put in a 10 sec login dleay

  • Active tab in Tabstrip on Report screen

    Hi. I developed a Report which has a tabstrip on its selection screen. After user press F8 and execute the report and it writes the result. When it come back to selection screen, it always come back to first tab. I want to back to last selected tab.

  • Compressor 3.5 Watermark Rendering Bad

    Hi All, Just upgraded to Final Cut Studio 3 (Compressor 3.5) and when I render Watermarks that looked fine in Compressor 3, they are now almost totally 'washed out' or faded. Specifically, the watermarks were made in Photoshop (PSD) and the Opacity w

  • How can I import my music files from my other computer

    I got a a new laptop, and I would like to import the music files from my older PC. How can I do this? Best regards.