How to keep image from moving when cropping?

I have been using LR for quite a while, but all of a sudden when I crop a photo, the image slides to the left or right and out of view.
In the past when I move the crop frame the photo would not move, that way I can see exactly how much of the photo I am cropping.
I have tried doing searches regarding a setting, but all I get are answers about locking the crop ratio and that is not what I need.
I need to keep the entire image in view when I slide the crop window.
Thanks!

Geoff the kiwi wrote:
Agfaclack - no need to even mention PS for this, it is only confusing.
i don´t think so.
because i had the same "problem" when i started with LR.
i was confused because lightrooms crop tool worked different then photoshops and i thought i had changed some settings that made LR behave "strange".

Similar Messages

How to keep original aspect ratio when cropping in Camera Raw?

How to keep original aspect ratio when cropping in Camera Raw? Cant figure it out! With shift, the aspect ratio is 1:1. But I didnt set it to 1:1 (I checked "normal").

The Shift key works once you’ve set your crop ratio. DSLRs would typically do 2:3 and others sometimes do 3:4.

How do I keep my images from moving when extending or contracting in browser?

Can anyone tell me if there is a solution to keeping multiple images from moving as the size of the browser is made larger or smaller. I am in the jewelry business and when I have multiple images, and a customer makes the browser window larger or smaller, it of course moves the images out of position and mixes everything up on different lines. As opposed to a site like Bluenile.com which images stay stationary as the browser window moves. I did try to make all my images on "one image" in Photoshop and that does seem to do what I want as far as the images go, but then I cant add links to individual pictures within that page. Please help !
One of my pages is http://www.milesgoldberg.com/Gentsbandsspecific.html
This is one when I extend or contract the window, the content gets all mixed up.
Now look at http://http://www.bluenile.com/wedding-rings/mens-wedding-rings
If you extend or contract the window, the content stays in place.

You're using a liquid layout based on percentages that resizes with browser viewport. As Ned said, a fixed width Table would be one approach. Another would be to use a Fixed Width CSS grid like this one (view page source to see the code)
http://alt-web.com/TEMPLATES/2-col-fixed-layout.shtml
HTH,
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/
www.twitter.com/altweb

How to keep Keywords from Bridge when importing photos

I am moving images from Bridge on my old computer to LR on my new computer. The photo comes in fine but the IPTC Core fields are not there.
How do I fix this?
Thanks!

I’ve never done it but I think the only way to do it is to use the export command to send files to the desktop or an external hard drive before moving to your new computer. Try selecting a test batch of images in Bridge and using:
File >> Export
After selecting the destination, click on the Image Options tab and choose all metadata.

How do i keep timeline from moving when my arrow moves over it?

I want to disable this so I can stop and start the clips without the arrow moving the scene along or back. does this make sense?

This does not make sense in the iMovie interface. iMovie has a "copy/paste" metaphor rather than a "timeline/scotch tape and scissors" metaphor.
I would recommend that you watch this [video tutorial for the basics|http://www.apple.com/findouthow/movies/imovie08.html#tutorial=create] and then watch other tutorials as you need them.

How to keep files from disappearing when using Dynamic link to AE in PremProCS4?

I am at my wits end here and hope someone can offer a solution. I use Dynamic Link in PremProCS4 to link a clip in my timeline to AfterEffects. I follow the instructions in my book and everytime I close my files and reopen..I loose the clip along with the effects...I get the place card instead. Here are the steps I do as per the Adobe Classroom in a Book Explains:
I double click on my .MTS file in the Project Board so it comes up on my Source Screen.
I take select the part of the clip I wish to use in my timeline and drag it to the appropriate spot on a video layer.
I then right click the "clip" and select "Replace With After Effects Comp"
I then name the new file. name or whatever.aep
It opens in AE
I then apply two simple effects... keying and a cartooning effect I use from NewBlue Cartooner.
As instructed I then go directly back to PremPro and do a "render" by pressing the Enter Key. This does not work since I only get a yellow bar above the clip instead of a red on???
So then I save the PremPro project and close it then go to the AE project, save and close it.
When I reopen PremPro the file has a place card in it and in AE it says I am missing a file.
I have tried many different ways to do this process including re-importing the .MTS file.
I can close PremPro and reopen it and all is the same as long as I don't close the AfterEffects project. Once AE is closed it looses the file. On a note here I keep all my computer source files in the same place and it never changes plus they are in my PPro Project as well. I never change the names so this isn't this reason.
Is there a tried and true method to select a piece of clip in the video layer in Prem Pro and add effects from AE and not have it misplace the files?
Thanks Kate

Hi Curt, and thank you for taking the time to respond.
Its odd how I've been trying to figure this one out for a long time and I tried your suggestion but it didn't make any difference..darn.
In the AE forum they say this is quite common and no one really knows why...double darn.
So I went back with a fresh mind this morning and tried something else..and it worked...so far anyway.
So far I figured it out... I guess I just needed to ask the question and write it all out to help get my brain working in the right direction:
Since the normal process to do this doesn't work for me ..and apparently many others..here is the solution for those of you having similar issues.
In PremPro select the desired clip you wish to place effects on
Rename it and save
R click and "Replace with AE composition"
Name new file
You will see three files pop up in AE in the project panel.
The original source clip .. in my case.. shows an icon that lets me know it isn't the true file.
Highlight this file with a click and then go Ctrl H (for PCs)
The group of computer source clips you use for your project will come up.. double click on the original clip you had imported into your PPro project.
The source file icon in AE will change to an icon that denotes the true file...save
Go to your still open Ppro project and make sure it carried the effects over..save.
Now you can save and close the AE project.
So for this works for me today and I hope this helps anyone else dealing with a similar issue.
Thanks.

How to keep files from disappearing when using Dynamic link to AE from PremProCS4?

I am at my wits end here and hope someone can offer a solution. I use Dynamic Link in PremProCS4 to link a clip in my timeline to AfterEffects. I follow the instructions in my book and everytime I close my files and reopen..I loose the clip along with the effects...I get the place card instead. Here are the steps I do as per the Adobe Classroom in a Book Explains:
I double click on my .MTS file in the Project Board so it comes up on my Source Screen.
I take select the part of the clip I wish to use in my timeline and drag it to the appropriate spot on a video layer.
I then right click the "clip" and select "Replace With After Effects Comp"
I then name the new file. name or whatever.aep
It opens in AE
I then apply two simple effects... keying and a cartooning effect I use from NewBlue Cartooner.
As instructed I then go directly back to PremPro and do a "render" by pressing the Enter Key. This does not work since I only get a yellow bar above the clip instead of a red on???
So then I save the PremPro project and close it then go to the AE project, save and close it.
When I reopen PremPro the file has a place card in it and in AE it says I am missing a file.
I have tried many different ways to do this process including re-importing the .MTS file.
I can close PremPro and reopen it and all is the same as long as I don't close the AfterEffects project. Once AE is closed it looses the file. On a note here I keep all my computer source files in the same place and it never changes plus they are in my PPro Project as well. I never change the names so this isn't this reason.
Is there a tried and true method to select a piece of clip in the video layer in Prem Pro and add effects from AE and not have it misplace the files?
Thanks Kate

Hi Mylenium, and thank you for taking the time to respond.
Your idea of renaming comps got me to thinking..hmm.
So I went back with a fresh mind this morning and tried something else..and it worked...so far anyway.
So far I figured it out...
Since the normal process to do this doesn't work for me ..and apparently many others..here is the solution for those of you having similar issues.
In PremPro select the desired clip you wish to place effects on
Rename it and save
R click and "Replace with AE composition"
Name new file
You will see three files pop up in AE in the project panel.
The original source clip .. in my case.. shows an icon that lets me know it isn't the true file.
Highlight this file with a click and then go Ctrl H (for PCs)
The group of computer source clips you use for your project will come up.. double click on the original clip you had imported into your PPro project.
The source file icon in AE will change to an icon that denotes the true file...save
Go to your still open Ppro project and make sure it carried the effects over..save.
Now you can save and close the AE project.
So for this works for me today and I hope this helps anyone else dealing with a similar issue.
Thanks.

Keeping image from moving

I'm having trouble with a sidebar at:
http://www.lets-eatnow.com
I have nested the sidebar in it's own table to make it stable
so when I add text to the right side the sidebar stays the same.
Three of the pages the image in the sidebar is lower than the
others.
What can I do to solve this problem?

geovino wrote:
> I'm having trouble with a sidebar at:
http://www.lets-eatnow.com
> I have nested the sidebar in it's own table to make it
stable so when I add
> text to the right side the sidebar stays the same.
> Three of the pages the image in the sidebar is lower
than the others.
> What can I do to solve this problem?
>
Well, your banner is causing the sidebar to appear lower on
the non-home
pages. BTW, how come no link back to home? And what does this
mean?
"It's 6 p.m. and today's hunter-gatherers are lining up at
the checkout
stand with their hot deli dinner of fattening fried, sauteed
soaked,
cheesy bland selections, paines at the cost of yet another
unhealthy meal."
Bonnie
in California
8 ^ )

How do I keep my images from moving in browser ?

Can anyone tell me if there is a solution to keeping multiple images from moving as the size of the browser is made larger or smaller. I am in the jewelry business and when I have multiple images, and a customer makes the browser window larger or smaller, it of course moves the images out of position and mixes everything up on different lines. As opposed to a site like Bluenile.com which images stay stationary as the browser window moves. I did try to make all my images on "one image" in Photoshop and that does seem to do what I want as far as the images go, but then I cant add links to individual pictures within that page. Please help !

One of my pages is http://www.milesgoldberg.com/Gentsbandsspecific.html
This is one when I extend or contract the window, the content gets all mixed up.
Now look at http://http://www.bluenile.com/wedding-rings/mens-wedding-rings
If you extend or contract the window, the content stays in place.

I have a ipod nano 4G, and to sync my music, i have to put my ipod in disk mode. but when i try to turn it on regularly, it gets stuck on the apple logo screen. any idea how to keep it from getting stuck?

i have a ipod nano 4G, and to sync my music, i have to put my ipod in disk mode. but when i try to turn it on regularly, it gets stuck on the apple logo screen. any idea how to keep it from getting stuck?

Did you also check under Albums? All Songs?
iPod Nano 5th Gen. User Manual

Itunes launches itself and starts playing even when my laptop is closed, but I can still hear it. I can't figure out how to keep it from doing it

itunes launches itself and starts playing even when my laptop is closed, but I can still hear it. I can't figure out how to keep it from doing that.

See if a device is attached and "open iTunes when iPod is connected" is selected. https://discussions.apple.com/message/16483979#16483979
Check for other iTunes preference settings that might cause this.
Hacks to stop Bluetooth speaker from starting iTunes -
http://forums.macrumors.com/showpost.php?p=19045335&postcount=4
LincDavis June 2014 post - https://discussions.apple.com/message/25998941

Prevent lower text from moving when accordion panels open

I tried out the Accordion Panel from Project Seven which is
really nice and works well. My only issue right now is that I would
like to prevent the rest of the text outside and below this widget
within the same column from moving. When any panel opens it causes
the contents of the entire column to shift down thus causing the
page to shift down as well.
I have tried using a new div for the content below the panels
and also a new table below but can't seem to figure out how to keep
the content from shifting. Curently I have a table cell nested and
have tried with CSS to keep it from moving but that is not working
either.
Thanks in advance for any help with this.
Here is the code for the column in question:

no takers on this one? Does anyone know how I could fix this
with divs? Is it possible to put this accordion into a separate div
and create another below it that would not move? Like on the new
apple site...They have some really awesome accordion style navs on
the sides that do not throw the rest of the page off when they open
or close.
Thanks.

How to copy images from another MC in reversed order??

Hi everyone,
I'm new to AS3 and have been fighting and searching for a solution to this problem for a week now, and I'm VERY close!
I crated a MC holding of a series of images (about 50) and I jump around in it using plenty AS3 scripts (most of which I don't fully understand yet, but I'm working on that to! )
I had to find a way to "rewind" (= play backwards) the MC. Since there is a stop(); command in almost every frame, prevFrame does not work and if I put that in a loop, it goes WAY to fast (but worked).. So I could think of only one way...
Create a new (reverserd) MC with the same image sequence ald reverse it manually and play that one.
This all works fine (very proud of it ).
Now my question:
To get this to work for multiple image sequences, I have to load all images twice (once in MC_1 and again in MC_2 and select them and reverse them).
Not a big one, unless you want to create MANY of those SWF's...
Is it possible to load the 50 images of the first MC in reverse into the second MC dynamically? JUST the images, noting else.
extra info: the MC_2 is already in the lib(empty) and placed on the stage.
something like:
var pointer:Number=1;
for (var:i:Number=50;i>=0;i--) {
get MC_1.picure(var);
put it in MC_2.frame(pointer);
pointer = pointer + 1;
All help is welcome and please take into account that I have little experience and copy most of my scripting from people like you
T.I.A.
Melluw

I tried your advice (thanks for that)
The event I already have is the mouse leave
I //-d out the part I removed (what did work)
The code I ended up with is:
function Start() {
stage.addEventListener(Event.MOUSE_LEAVE, cursorHide);
function cursorHide(evt:Event):void {
var currFrame = MC_1.currentFrame;
if (CCW == true) { //it is true in this case
movStart = (50 - currFrame);
else {
movStart = currFrame;
if (movStart>25) {
MC_1.prevFrame();
// removed swapChildren(MC_1, MC_2); // This is the part I removed
// removed MC_2.gotoAndPlay(movStart);
else {
MC_1.gotoAndPlay (movStart);
And if I leave the stage on the part where movStart is indeed >25
Nothing happens,
So I guess this is not what you meant
Subject: Action Script 3 how to copy images from another MC in reversed order??
I cannot direct you in the loading of the images approach, it will be too complicated, and will probably not work anyways... when you move away from a frame that has dynamic content, you lose the content. So basically, there is nothing practical in taking that approach.
I do niot understand what the problem will be with the enterFrame/prevFrame approach. If everything you can do with the mouse is already used (which I doubt) by the first mc, then there is nothing else you can do with this file. You probably just need to rethink your control scheme. You should search Google for "AS3 slideshow tutorial", and to lighten up your design, add "XML" in that search.
>

How to load images from css file in JavaFX 8

I have this css file which loads images in JavaFX 8 application:
#pill-left {
    -fx-padding: 5;
     -fx-border-image-source: url("/com/dx57dc/images/left-btn.png");
    -fx-border-image-slice: 4 4 4 4 fill;
    -fx-border-image-width: 4 4 4 4;
    -fx-border-image-insets: 0;
    -fx-border-image-repeat: stretch;
     -fx-background-color: null !important;
#pill-left:selected { -fx-border-image-source: url("/com/dx57dc/images/left-btn-selected.png"); }
#pill-left .label {
    -fx-text-fill: #d3d3d3;
    -fx-effect: dropshadow( one-pass-box , rgba(0,0,0,0.75) , 0, 0.0 , 0 , -1 );
#pill-left:selected .label {
    /* -fx-text-fill: black; */
    -fx-text-fill: white;
    -fx-effect: dropshadow( one-pass-box , white , 0, 0.0 , 0 , 1 );
#pill-center {
    -fx-padding: 5;
     -fx-border-image-source: url("/com/dx57dc/images/center-btn.png");
    -fx-border-image-slice: 4 4 4 4 fill;
    -fx-border-image-width: 4 4 4 4;
    -fx-border-image-insets: 0;
    -fx-border-image-repeat: stretch;
     -fx-background-color: null !important;
#pill-center:selected { -fx-border-image-source: url("/com/dx57dc/images/center-btn-selected.png"); }
#pill-center .label {
    -fx-text-fill: #d3d3d3;
     -fx-effect: dropshadow( one-pass-box , rgba(0,0,0,0.75) , 0, 0.0 , 0 , -1 );
#pill-center:selected .label {
    -fx-text-fill: black;
    -fx-effect: dropshadow( one-pass-box , white , 0, 0.0 , 0 , 1 );
#pill-right {
    -fx-padding: 5;
    -fx-border-image-source: url("/com/dx57dc/images/right-btn.png");
    -fx-border-image-slice: 4 4 4 4 fill;
    -fx-border-image-width: 4 4 4 4;
    -fx-border-image-insets: 0;
     -fx-border-image-repeat: stretch;
    -fx-background-color: null !important;
#pill-right:selected { -fx-border-image-source: url("/com/dx57dc/images/right-btn-selected.png"); }
#pill-right .label {
     -fx-text-fill: #d3d3d3;
    -fx-effect: dropshadow( one-pass-box , rgba(0,0,0,0.75) , 0, 0.0 , 0 , -1 );
#pill-right:selected .label {
    -fx-text-fill: black;
    -fx-effect: dropshadow( one-pass-box , white , 0, 0.0 , 0 , 1 );
The images are located at the Java package com.dx57dc.images
In Java 7_25 this code works as expected but in JavaFX 8 b99 I get this error:
ava.lang.NullPointerException
at com.sun.javafx.sg.prism.NGRegion.renderContent(NGRegion.java:1129)
at com.sun.javafx.sg.prism.NGNode.doRender(NGNode.java:1598)
at com.sun.javafx.sg.prism.NGNode.render(NGNode.java:1520)
at com.sun.javafx.sg.prism.NGGroup.renderChildren(NGGroup.java:233)
at com.sun.javafx.sg.prism.NGGroup.renderContent(NGGroup.java:199)
at com.sun.javafx.sg.prism.NGRegion.renderContent(NGRegion.java:1249)
at com.sun.javafx.sg.prism.NGNode.doRender(NGNode.java:1598)
at com.sun.javafx.sg.prism.NGNode.render(NGNode.java:1520)
at com.sun.javafx.sg.prism.NGGroup.renderChildren(NGGroup.java:233)
at com.sun.javafx.sg.prism.NGGroup.renderContent(NGGroup.java:199)
at com.sun.javafx.sg.prism.NGRegion.renderContent(NGRegion.java:1249)
at com.sun.javafx.sg.prism.NGNode.doRender(NGNode.java:1598)
at com.sun.javafx.sg.prism.NGNode.render(NGNode.java:1520)
at com.sun.javafx.tk.quantum.ViewPainter.doPaint(ViewPainter.java:99)
at com.sun.javafx.tk.quantum.AbstractPainter.paintImpl(AbstractPainter.java:210)
at com.sun.javafx.tk.quantum.PresentingPainter.run(PresentingPainter.java:95)
at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:471)
at java.util.concurrent.FutureTask.runAndReset(FutureTask.java:304)
at com.sun.javafx.tk.RenderJob.run(RenderJob.java:58)
at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1145)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:615)
at com.sun.javafx.tk.quantum.QuantumRenderer$PipelineRunnable.run(QuantumRenderer.java:129)
at java.lang.Thread.run(Thread.java:724)
D3D Vram Pool: 13,331,480 used (5.0%), 13,331,480 managed (5.0%), 268,435,456 total
20 total resources being managed
4 permanent resources (20.0%)
1 resources locked (5.0%)
7 resources contain interesting data (35.0%)
0 resources disappeared (0.0%)
D3D Vram Pool: 13,331,480 used (5.0%), 13,331,480 managed (5.0%), 268,435,456 total
20 total resources being managed
4 permanent resources (20.0%)
1 resources locked (5.0%)
7 resources contain interesting data (35.0%)
0 resources disappeared (0.0%)
D3D Vram Pool: 13,331,480 used (5.0%), 13,331,480 managed (5.0%), 268,435,456 total
20 total resources being managed
4 permanent resources (20.0%)
1 resources locked (5.0%)
7 resources contain interesting data (35.0%)
0 resources disappeared (0.0%)
What is the proper way to load images from css in Java 8?
Ref
How to load images from css file in JavaFX 8 - Stack Overflow

There is nothing special to do - you execute the statement from your program just like any other SQL statement. The only thing to be aware of are the privilege/permission issues:
When loading from a file on a client computer:
READ CLIENT FILE privilege is also required for the database user.
Read privileges are required on the directory being read from.
The allow_read_client_file database option must be enabled.
The read_client_file secure feature must be enabled.
Revoking these privileges is also the only way you can prevent a user from executing the statement.

How to move images from Picasa to Lightroom 5 on a mac?

How to import images from Picasa to Lightroom 5 on a mac?

Hi, lnmyers,
I have thousands of pictures stored in Picasa, all of which are stored in my Picasa Web Albums. They are no longer in a directory on my hard-drive, that particular hard-drive having died ages ago. Thank goodness I uploaded them to Picasa's cloud before the hard-drive died. Should that ever darken, I am in trouble. I digress. I downloaded the pictures I wanted from Picasa Web Albums to my new external hard-drive that I set up and attached to my mac. For example: I had a an album called "California 2013" stored in the Picasa cloud. I downloaded the entire album to a folder on my Seagate external drive that I call Lightroom within which I have a folder called California 2013. It took about twenty minutes to get them all (300+ photos). Then, I pointed LR to the California 2013 folder on the Seagate external drive when I wanted to catalogue the pictures into LR. I did not worry about metadata; I took whatever came with the pictures and didn't worry about it. I added copyright, keywords, and ownership info with LR.
I hope that helps.

How to keep image from moving when cropping?

Similar Messages

Maybe you are looking for