How to keep just the selected angles in a multicamera sequence??
Hello,
Is there any way to "uncollapse" ala Final Cut for lack of another word, the multi camera clips??
I just want to keep in the sequence the selected angles and not be in a multi camera nested environment type thing.
If I disable the mutlicamera what stays is completely different to what I selected.
Thanks a lot
F.
Greg, check this article about multicam. This is the same thing I was saying.
Link to full article.
http://provideocoalition.com/index.php/ssimmons/story/working_with_multicam_in_adobe_premi ere_pro_cs6/
And no way to commit or collapse those multicam edits
One other thing that is missing from Premiere Pro CS6’s multicam editing is a way to commit multicam edits (as Avid Media Composer calls it) or collapse multiclips (as Final Cut Pro 7 calls it) when you’re done with an edit. This function basically replaces all group clips (as Avid calls them) or multiclips (as FCP7 calls them) with a normal, single clip in the timeline. This can be very important if you’re sending out AAFs or XMLs to another finishing system as multicam-type clips might cause some problems on conform.
It looks like PPro CS6 has something similar because if you right+click on a multicam clip and look at the Multi-Camera submenu there’s an option to Enable:
When you toggle that Enable check mark and disable the multicam clip it doesn’t “commit” that clip to the timeline but rather it seems to default to whatever clip is on the top most video layer in the Multi-Camera Source Sequence timeline. That doesn’t make a lot of sense to me but I think that’s a holdover from the older PPro versions when you had to edit a sequence into a sequence and then enable Multi-Camera to make it work. If Adobe wants to make Premiere Pro play nice with conform and finishing applications (and I think they do) then some way to collapse/commit multi-camera edits to a timeline with one swift click will help.
Similar Messages
-
How to get only the selected layer data?
Hi All,
I'm using dissolve sample plugin. I added two layers in photoshop both of different dimensions, say 1000 * 1000 & 2000 * 2000. Now I select the layer with 1000 * 1000 dimension and click on Dissolve plugin. The preview image what is shown in dissolve plugin dialog is not just the selected layer, but also some extra pixels around the selected layer.
Do I need to set any flag for getting only selected layer data to display in preview?
Also I need to get only the selected area in a particular layer. When I checked FilterRecordPtr, haveMask flag is TRUE if the part of the layer is selected. But how do I get only the part of the layer that is selected for displaying preview image?
Please let me know if the description is not clear.
Thanks,
DheerajThanks Tom Ruark for the response.
That is exactly the same thing what I'm seeing.
1.Is there a direct way to know the bounds of the layer without the transparency grid so that I can show only the layer?
2. If I select an area of 50*50 within a layer(1000*1000) using Rectangular Marquee tool, then I want only that selected area to be shown in preview. For this there is a haveMask flag which indicates whether or not there is selection, but the selected bounds are not available. I'm currently calculating the bounds. I just wanted to know if Photoshop SDK has any field for getting the bounds? -
How i can show the selection screen input field in the top of page in alv
hi ,
how i can show the selection screen input field in the top of page in alv grid output.
tell me the processHi,
excample from my program:
FORM topof_page.
DATA: l_it_header TYPE TABLE OF slis_listheader WITH HEADER LINE,
l_info LIKE l_it_header-info.
DATA: l_it_textpool TYPE TABLE OF textpool WITH HEADER LINE.
DATA: l_key LIKE l_it_textpool-key.
READ TEXTPOOL c_repid INTO l_it_textpool LANGUAGE sy-langu.
DEFINE m_selinfo.
if not &1 is initial.
clear l_it_header.
l_it_header-typ = 'S'.
l_key = '&1'.
translate l_key to upper case.
read table l_it_textpool with key key = l_key.
if sy-subrc = 0.
shift l_it_textpool-entry left deleting leading space.
l_it_header-key = l_it_textpool-entry .
endif.
loop at &1.
case &1-option.
when 'EQ'
or 'BT'
or 'CP'.
write &1-low to l_it_header-info.
when others.
write &1-low to l_it_header-info.
concatenate &1-option
l_it_header-info
into l_it_header-info
separated by space.
endcase.
if not &1-high is initial.
write &1-high to l_info left-justified.
concatenate l_it_header-info
l_info
into l_it_header-info
separated by space.
endif.
if &1-sign = 'E'.
concatenate ']'
l_it_header-info
into l_it_header-info.
endif.
append l_it_header.
clear: l_it_header-key,
l_it_header-info.
endloop.
endif.
END-OF-DEFINITION.
m_selinfo: s_trmdat,
s_trmext,
s_trmint,
s_fkdat,
s_delno,
s_vbeln,
s_deact,
s_kdmat.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
it_list_commentary = l_it_header[].
ENDFORM.
I hope, this will help you.
Regards
Nicole -
How can we pass the select-option value to modulepool program?
hi,
how can we pass the select-option value to modulepool program ?
Because if i declared select-options in executable program and i used SSCRFIELDS to define push buttons in selection screen.
My requirement if enter the values to select-options and press UPDATE pussbotton then i want call screen which contains tablecontrol.
How i get select-option values to PAI of call screen for getting the data from database table to my internal table?Oh I thought that you have selection-screen and again you are working on dialog programming.
if you want to use select-option directly in module pool then it is not possible.
but you can do other way.
create two varaiables
data : v_kun_low like kna1-kunnr,
v_kun_high like kna1-kunnr.
use these two variables in layout ,let user knows that he can not give options like gt,lt,eq ,it will be always BT.
and also when you see normal report program,you can use multiple values in either low or high,but here it is not possibel.
use can enter only low value and high value.
when you come to program point of view
declare one range
ranges r_kunnr for kna1-kunnr.
do the coding like
r_kunnr-low = v_kun_low.
r_kunnr-high = v_kun_high.
r_kunnr-options = 'BT'.
r_kunnr-sign = 'I'.
append r_kunnr.
now you can use r_kunnr in select query ,it will work like select-option.
other than this there is no option.
Thanks
Seshu -
How to find out the selected column in Table Control
Hi all,
How to find out the selected column in Table Control?
Thanks & Regards,
YJRHi,
Let your table control name in Screen painter be TC1.
READ TABLE TC1-COLS INTO WA_COLS (some wok area)
WITH KEY SELECTED = 'X'.
IF SY-SUBRC = 0.
CLEAR: W_DUMMY, W_COL_NAME.
SPLIT WA_COLS-SCREEN-NAME AT '-' INTO W_DUMMY
W_COL_NAME.
endif.
W_COL_NAME gives you the column name.
Hope it helps.
cheers
sharmistha -
How can I reduce the selection for the characteristics value in a BW query
Good morning,
I need to find out how I can reduce the selection for the characteristics values in a BW query.
In a BW query I have a characteristic "Due month".
The characteristic values shown in the query are from 01.2001->03.2007. I would like to reduce it to the last 2 years,in the query view, without deleting the data for the other years in the cube.
Do you know how this can be done?
Thank you in advance for your feedback.
Kind regards,
Linda Verding
Staff Consultant - CSChi,
First thing you have to do is check the report how the data is being restricted only to those months.
1) one it can be variable in which the code is written for that to populate for last few years.
or else it must have been hardcoded for these months.
Go into your report and underneath the characteristicsCALMONTH there must be an variable or hardcoding.
You need to change this here in the report.
You dont have to delete anything there.
Regards, Siva -
How can I access the selected element of a DropDownByIndex-box?
Hi,
I want to create a WebDynpro with two web services. I created the first request with the first web service and the results are displayed in a DropDownByIndex-Box. Now the user should choose one of the results and I would like to use this for the request with my second web service. How can I access the selected Element of a DropDownByIndexBox in the Code?
Thank you!!
JuliaHi Julia,
when user select one element in drop down it automatically set lead selection of node binded to dropdown.
For example if you bind a dropdown to node myNode with value attribute myAttribute the lead selection of node myNode is set in the position of element choose from user.
So to take this chooised element use this code:
wdContext.currentMyNodeElement.getmyAttribute()
bye
Andrea -
How to find out the selected line in list
Hi all,
Can any one tell me how to find out the selected event in the listYour subject said 'selected <b>line</b> in list' and your description says 'selected <b>event</b> in the list'. Which one is it you want to know?
For line you will use the event AT LINE-SELECTION and for event you will use AT USER-COMMAND.
Please reward and close if answered, if not, please revert back to the forum with more details.
Thanks,
Srinivas -
How could i get the selected node in the JTree
getLastSelectedPathComponent() �returns the parent node of currenr selected, so how could I get the selected node itself in the JTree
I will appretiate for any help!i think you can get by....
TreePath treePath = tree.getSelectionPath();
DefaultMutableTreeNode treeNode = (DefaultMutableTreeNode) treePath.getLastPathComponent(); -
How can I see the selected tags in the tag bar clearly
How can I see the selected tags in the tag bar clearly (they used to be in black, now they do not change color; a highlight or Bold would help)
The History menu lets you revisit the page where you can drag any page element from it.
How would you sort through thousands (tens of thousands) of files found in a cache? -
How to find out the selected item in the lsit
Hi all,
How to find out the selected item in the list,can any please post some examples which easy to understand,because iam not a good programmerThis sample program uses a checkbox as selection, you could also use a HOTSPOT.
report zrich_0002 no standard page heading.
data: imara type table of mara with header line.
data: check_box(1) type c,
report_lines type i.
start-of-selection.
* Create the gui status with BACK button in standard place
* and a READ button in the application toolbar
set pf-status 'CHECK'.
select * into corresponding fields of table imara from mara up to 100 rows.
loop at imara.
write:/ check_box as checkbox, imara-matnr, imara-matkl.
hide imara-matnr.
endloop.
report_lines = sy-linno - 1.
top-of-page.
write: 'List of materials'. uline.
top-of-page during line-selection. write: 'Material.....'. uline.
at user-command.
case sy-ucomm.
when 'READ'.
check_box = space.
set pf-status 'CHECK' excluding 'READ'.
do report_lines times.
read line sy-index field value check_box.
if check_box = 'X'.
write:/ 'You have selected material',
imara-matnr.
endif.
enddo.
endcase.
Regards,
Rich Heilman -
The selection tool is missing from my tool bar in indesign. Instead the page tool is there. How do I get the selection tool back?
Your reply is blank. The forums do not accept attachments, so if that's how you tried to post a screen shot please come back to the web page and use the camera icon to embed it in a post, like this:
-
How can we make the selected Debug User Agent Netscape 7.0 stick?
To get into http://gap.com I have to go to the Debug menu, choose User Agent and choose Netscape 7.0.
It works Ok.
Then I quit Safari. Get back into Safari. User Agent is back to Automatically Chosen, and gap.com to not working.
How can we make the selected User Agent stick?
Thanks,
RobertoUnfortunately, I don't think there is an automated way of going about this. To begin with, the 'Debug' menu was never meant to be user accessible in the most common context.
However, that said, you could lessen the pain by assigning a keyboard shortcut to the 'Netscape 7.0' menu-item in the 'Keyboard & Mouse' preference pane (under the 'Keyboard Shortcuts' tab). Hope that helps, somewhat.
Yang -
Any ideas or thoughts on how to locate JUST the iTunes music?
I’d like to know if there is a way to run a program/script to identify the songs purchased from iTunes only?
I have my CD’s uploaded digitally to an external drive and purchased iTunes songs and I’m trying to organize what I have.
Any ideas or thoughts on how to locate JUST the iTunes music?Found a solution, but it's not ideal or what I was really requesting. However it will work for now.
Add the "Kind" column and sort by "ACC Purchased audio file" and you can get what you need.
I was really looking for a shell script to do this.... If anyone has a way of doing this let me know. -
How do view ONLY the selected clip?
Is the sequence marker the ONLy way to view a selected clip(s) -- along with the Play-In to Out button?
Often times, I just want to view just one clip in the timeline after I've added effects. If I don't set a sequence marker, PPro plays the entire sequence in the entire timeline of the project, which is more than what I want to view.
Is there any other way, other than setting sequence markers, to view JUST the selected clip(s)?
I thought that, intuitively, selecting a clip (or group of clips) with my pointer would by default playback ONLY the selected clip(s). But I guess not.I used the work area bar and it did nothing. I played the clip(s) under the work area bar, but it continued playing beyond the bar. Also, when I hit Play again, it started from the beginning of the timeline, not the beginning of the clip under the bar. So, the work area bar seems to only have use when you want to preview something by rendering the tracks under the bar. Otherwise, nothing special. The work area bar is useless to me, unless someone shows me the light.
Maybe you are looking for
-
Using Portal navigation for KM Integration in ABAP
Hi All, I am trying to call the KM Navigation iview from ABAP webdynpro view. it is like implement the same functionality as currently available for Repository filters through ABAP coding. I have to create a new Folder in the KM and call the KM Navig
-
I have a problem that iOS7 gives me headache, how to turn these features of?
Hi, I do have a problem that when using iPhone with the new iOS7 I do get a headache, and so do several of my company employees. I have tried to turn of in settings but this do not help... I would be sad to have to replace all iPhones in the company,
-
Suddenly cannot open webpage file ending IDX
I am very new to Apple. I have a MacBook Pro. There is a wesite I use ften and I have never had problems with it. Suddenly I get halfway through it and nothing happens when I submit. Nothing at all. As if I never pressed submit at all. Now this site
-
We must use JSSE because of SHA256RSA sign algorithm. Business Service calls a remote webservice over two way ssl. Client-cert configured, Key Provider is correctly set, PKI Provider Mapping is fine. Everything is tested with SoapUI 2way SSL and work
-
How to come to know that the BEx queries created in whether in 3.X or 7.X
Hi Friends, How to come to know that the BEx queries created whether in 3.X or 7.X. Some queries created in 3.X and some in 7.X in my system. How to know that the query created in which version. Where we can find such information. It might be smaal i