How to keep Motion created titles looking sharp on final DVD?

Hello again... I'm having trouble keeping my motion created titles looking sharp on the final DVDSP project. Im exporting a title sequence out of motion into fcp and then exporting the full project via compressor for burn in DVDSP. I'm familiar with the usual temporary quality loss of titles generated with FCP or Livetype while viewing them within the FCP, Compressor, or DVDSP preview, and understand that once they are compressed and viewed on the TV they look great, but for some reason i can't get my motion created titles to do the same.
Out of Motion- i'm using the preset QT settings on the highest quality. Should i use a different setting out of Motion, perhaps an uncompressed QT or via compressor?

Thanks- i'm trying that now. And by the way.... sorry about the misunderstanding. I am exporting out of motion onto my desktop, and then importing the project using FCP.

Similar Messages

  • How to keep my created network after restart

    hi,
    my mac mini is just used to be connected to a videoprojector. so i don t connect a screen or mouse, keyboard or else.
    i have access to it through the wireless network i created on the macmini.
    but if i restart the macmini, the network is gone and i have to connect mouse keyboard, sceen, to re create the network!
    my problem is that i only have access to my mac mini by wireless network . but i don t want to share internet access. just have a network between two macs , to access to one with share screens.
    If i create a network, and then restart, the network is gone. it disappears.
    so if i restart my mac mini via screenshare , there is no network. and i can t have access to the mac mini anymore.
    how can i keep this created network after restart?
    i tried to make it work with automator but kind of didn t make it to work

    Do you keep other settings (e.g. in Options) that you make in Firefox?
    Create a new profile as a test to check if your current profile is causing the problems.
    See "Creating a profile":
    *https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
    *http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
    If the new profile works then you can transfer some files from an existing profile to the new profile, but be careful not to copy corrupted files.
    *http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

  • How do i get MS Office look sharper to a retina display?

    My MS Office 2011 doesn't look good, it ain't retina.
    Anybody knows if or when a update will come and support retina displays?
    or is there a

    I don't know anyone who has achieved a decent-looking MS Office display using a rMBP. Other apps use Apple's text rendering engine while MS uses its own, apparently (which is why the other 'office' apps look so good).
    Give one of them a shot - from what I understand, both render wonderful looking text and menus/icons while MS Office has fuzzy toolbars and text.
    Clinton

  • Video tutorial "How To Transfer User Created Title Templates from CS5 to CS5.5 Adobe Premiere"

    A friend of Mine asked me this question and he said he looked every where to find.  Instead of trying to explain it to him.  I just made a quick video of it.
    I used a Panasonic hmc 150, Senheiser ME 66 shotgun mic, camstudio (capture the screen) and Adobe CS 5.5 Production Suite.
    I figured I would post it here incase someone searches for this question.   People have helped me so much in the past on this forum.  I just want to try and give back if I can.

    Thank you.

  • How to keep Date created and Date modified when converting nef to dng

    Hi
    I noticed that when we convert NEF files to DNG in it properties the Date Created and Date Modifed are changed to the present date and not the original dates of the files in question. Is there any way to make such a conversion without changing these proeprties? Yes, I know 'Date taken' does not change--but this info does not show up when you hover a file only the info in its properties does hence me asking the question.
    Also am I correct in assuming that this conversion is 100% lossless, nothing but nothing is lost in the qualtiy and info of the file (besides the file size)? Thank you
    OS: Windows 7 (64)

    A DNG from an NEF is a new file so it’s Windows dates are as of its creation on Windows.  The date modified would further change if you updated the DNG with a new preview and/or embedded metadata into it. 
    If you need the files to have the camera’s creation date, then use Windows Explorer to copy them, don’t convert to DNG, and just Add them to your LR catalog, and tell LR not to add a timezone or otherwise adjust the timestamps which might also update the file modification time.

  • How do I preset a title text style in Final Cut Pro X?

    I want to use the same title stye again and again in Final Cut Pro X - font size, style, color. 
    Final Cut Pro is happy to have me "Save a Preset to Library", but then I never see it again.   When I go to the dropdown menu, all I get is Apple's list of truly hideous fonts like 80s, Aqua Fade, Candy, etc.
    I save my favorite style as "Basic" and that does nothing either - as soon as I add a new title and apply the "Basic" setting I get Apple's horrible Gil Sans again.  What's going on?
    Any tips on how to perform what should be a very simple operation?  Have spent more than an hour on this now.

    Well, Tom, I guess I'm just not as fortunate.  Anyone else have any suggestions?

  • Unable to create titles, getting "Out of memory" error message

    I am editing a project on FCE 2.0.3.
    I recently re-opened the project after about a year. It is stored on a 500GB external firewire hard-drive. I am working on a Mac G5 Powermac 7.2 with OS 10.4.11 with 1GB of RAM. I have my system settings on FCE set at 100% for memory usage and still cache. All my system settings on FCE are set to save to the external drive. I have 16GB available on my G5 memory.
    Every time I try to create a title using Title crawl, i get this error message:
    AE Effects Error: Out of memory using "title crawl."
    Also, every time I close the project and re-open it, I have to reconnect all the media and re-render everything, even though I save the project each time. I have also Saved As a different project name multiple times and this doesn't help.
    One other issue: The titles that I have on the project already look clear when the video is paused on a frame, but when they are moving they look very low-res and pixilated. The pixilated look also happens when I output my video to a QT movie. How can I make the titles look sharp?
    Please help!
    THANKS
    -Pierre
    Message was edited by: Pierre Degaillande1

    Before you do anything, trash your preferences exactly as detailed in this link:
    http://fcpbook.com/Misc1.html
    +"AE Effects Error: Out of memory using "title crawl.""+
    Try pushing down the memory usage and still cache a lot, and see if that helps. You only have 1GB of RAM, so keeping them at 100% is not a good idea. A computer can easily use about half a gigabyte just maintaining regular processes. To make sure you don't overload your RAM, you need to set the amount of memory FCE can use to a much smaller amount.
    +"Also, every time I close the project and re-open it, I have to reconnect all the media and re-render everything, even though I save the project each time. I have also Saved As a different project name multiple times and this doesn't help."+
    Are you moving files around on your scratch disk or renaming them? If so, you will have to reconnect them every time you change things.
    +"The titles that I have on the project already look clear when the video is paused on a frame, but when they are moving they look very low-res and pixilated. The pixilated look also happens when I output my video to a QT movie. How can I make the titles look sharp?"+
    Are you looking at the fully rendered movie? Click Option-R to render everything out.

  • Why do vector lines appear different in my Photoshop document compared to the PDF that was created using "Scripts Layer Comps to PDF"? And how do I get them to look the same?

    Why do vector lines appear different in my Photoshop document compared to the PDF that was created using "Scripts > Layer Comps to PDF"? And how do I get them to look the same?

    BOILERPLATE TEXT:
    If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop and of Bridge, machine specs, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • How do I create titles for albums in Photo app?

    When someone sends me photos in an email and I download them to my ipad2 they automatically appear in the native Photo App. When I tap Album they are grouped together with the title “Camera Roll” whatever that means. My question is: How to I change the title “Camera Roll” to a title of my choosing? I know how to do this in iPhoto on my MacBook Pro where most of my photos are grouped in “events” but have no idea how to do this on my ipad. Thanks in advance for any suggestions.

    Photos that are emailed to you and saved to your iPad are automatically saved to the Camera Roll. You can not title the photos or albums on the iPad without using a third party app. The photo captioning ability is not built into the iOS. You can search the apps store but one app that I know of is called Photo-Sort for iPad. You can also organize and create folders for your photos with this app.
    Message was edited by: Demo

  • How do I create this look in illustrator....

    I'm recreating some vintage art and am trying to get this spray paint look. Any suggestions on how to go about achieving this look (see photo) in illustrator?
    I'm currently running CS4 (I'm on my work computer)....
    [URL=http://imageshack.us/photo/my-images/23/aaaov.jpg/][IMG]http://img23.imageshack.us/img23/4 728/aaaov.jpg[/IMG][/URL]
    - I've tried looking in the preset brushes, no luck!
    - I've tried creating my own brush using vector spray paint, no luck!
    - I've tried looking for illustrator brushes online, no luck!
    This seems like a very simple effect to do, I know how to create this look in photoshop but I need this to be vector. Any suggestions would be great!
    Thanks guys!

    First...
    There is nothing wrong with a 1-bit diffusion dither object being raster, as far as printing results is concerned. Such images date back to the days of MacPaint and Hypercard. They are same-size (historically usually 1-point) pixels, randomly distributed at varying frequencies to suggest tones (as opposed to individual printer spots being combined to build varying size halftone dots).
    So if the tiny squares are vector, yes, they are scaleable. But so are 1-bit pixels. When you scale a 1-bit raster, you're scaling square pixels, which are printed as squares. So a scaled 1-bit raster image is just as "resolution independent" as a bunch of vector squares.
    Second...
    This effect was employed in illustrations and designs since the very beginning of desktop publishing. For example, I frequently used it in the 80s thusly:
    1. Draw a vector path of any shape in FreeHand.
    2. Copy it to Photoshop. Blur it. Convert to 1-bit using diffusion dither. Save it as TIFF.
    3. Import into FreeHand. Stack it below the object for which it served as a glow or drop shadow.
    FreeHand had the ability to apply any color to a 1-bit or grayscale raster image, and the ability to set the white pixels of a 1-bit image to transparent. Illustrator didn't gain those abilities until decades later.
    So it's not oppressively tedious to use that method nowadays, even in Illustrator. (And frankly, that's the way I'd do it.)
    Third...
    Illustrator sorely needs to provided a diffusion dither option in its Rasterize command for 1-bit color depth (as I've been arguing for years) instead of its lame pattern diffusion. Then this effect could be applied easily and quickly to any object, either as a "nailed down" rasterization, or as a live effect.
    However...
    You can simulate a vector diffusion dither pattern that you can apply to any path by combining several Scatter Brushes and storing their combined application as a Graphic Style:
    1. Draw a 1 point square.
    2. Store it as a Scatter Brush. Set the Spacing and Scatter settings to Random. To constrain the pattern to one side of the path to which it is applied, set the low limit of Scatter to zero.
    3. Duplicate the Scatter Brush two or more times, changing the Spacing and Scatter upper limits in each duplicate so as to make each duplicate Brush increasingly sparse. In the example shown, the first Brush is named Scatter Brush 1 and has its upper limits for Spacing and Scatter to 300. This Brush was duplicated twice, and those two values doubled each time. But of course you can use whatever settings work for the effect you want.
    4. Draw a temporary path with a 1-point stroke. Apply Scatter Brush 1. Select the Stroke Appearance and duplciate it. Apply Scatter Brush 2 to it. Duplicate the Stroke Appearance again, and apply Scatter Brush 3 to it.
    5. Drag the whole path and drop it into the Graphic Styles palette to define a new Graphic Style. Now you can apply the whole Appearance stack to any other path(s) with one click.
    Being Brushes, the fineness of the pattern can be adjusted by changing the weight of the strokes:
    And, of course, you can apply other effects to the Brushes and strokes involved. For example, set the Colorization Mode of the Brushes to be able to change the color of the dither pattern; and/or apply Transform Effect to offset the pattern from the object to which it is applied (as for dithered drop shadows).
    JET

  • How can we create a look-up in Enterprise Gateway.. like key value pair..???

    How can we create a look-up in Enterprise Gateway.. like key value pair..???

    Hi,
    You want to have a look at KPS, Key Property Store. Link: Key Property Stores
    Cheers,
    Stefan

  • How to create title (heading) in the tabel control

    hi experts,
    i want to create title (heading) in the table control for this what sud i do plz help me....

    In the table control attributes, select With title.
    A dialog box appears, reminding you to create a title element.
    Enter a text field or an input/output element in the title row.
    Enter an element name, and the title in the Text field.

  • How to create good looking GUI workflows without Infopath forms

    Hi All,
    I have to create Good looking GUI without using Infopath Forms for use in workflows.
    Since Infopath support will gradually go off I want to use some other technique so that it can be used in long run.
    Please let me know a good solution.
    Regards,
    Navy

    You can use Visio to obtain nice visual flows.. for your workflow.. In 2013 you can use visual designer..
    Please refer link below..
    http://blogs.msdn.com/b/sharepointdesigner/archive/2012/10/22/introducing-the-new-visual-designer.aspx
    Nintex or K2 are good options specifically nintex if you can afford them..

  • How can I align multiple titles in Premiere Pro?

    We are working on a video (obviously) and we have a bullet list that we'd like to come up as the speaker is naming off specific items. So far we have created a separate title for each bullet point, so that we can control when the bullets fade in. The issue we're having is that we have to eyeball the alignment right now and it's not always accurate. So i'm looking for some help. How can I select multiple titles in the timeline and right align them - OR - is there a way to have all of these bullet points in one title and still maintain control of when they fade in and out?

    This technique will only work with current versions of PPro - it looks harder to do than it actually is:
    Create the title with all the bullet points, aligned as you wish, in the Title Tool.
    Exit the title tool, the title you just created will appear in your project.
    Click on the title to select it (if it is not already selected) and then go to the menu Edit > Duplicate.
    Repeat the duplication process to make as many copies as number of bullet points you want to transition on.
    Place the first copy of the title where you want the Title to appear in your video.
    Double click on the clip of the title on the timeline to re-open the Title Tool. Delete all the text except the first line.
    Now place the second copy where you want it to appear in the video.
    Double click on it to re-enter the Title Tool, and delete all the text except the first two lines.
    Repeat this process for as many bullet points as you have, delating one fewer bullet point each time. You can add transitions at the cut points between the titles (such as a dissolve) to make the next bullet point appear as you wish.
    If you try to to this using an early version of PPro this will not work as the titles and its copies are linked - so if you change one of the copies, it changes all the other titles. Fortunately this has been fixed in the current version.
    MtD

  • How to change the Browser title when report runs on the web?

    Hi folks,
    How to change the title of the browser when I run my report on the web? Iam using Internet explorer and Reports 6i. Is it possible in 6i or 10g reports?
    Could you please tell me the step by step procedure ?
    Right now the browser is displaying the URL when I run the report with format = PDF.
    Thanks.

    It works for me. I don't see why you have a problem with >this code.
    Can you look at the source code of the html >file that was created (so, not in the browser, but in a >text editor). What do the header and title look like?The Html code in the file is same as the above code I specified. Actually I copied the same code and pasted here. But when I run the html file the Title shows up.
    Don't put </html> there. Maybe that helps. I tried this, but it did not work.
    Please let me know is there any way to set it dynamically inside the triggers using SRW built_in.
    Thanks alot.

Maybe you are looking for