How to keep my created network after restart

hi,
my mac mini is just used to be connected to a videoprojector. so i don t connect a screen or mouse, keyboard or else.
i have access to it through the wireless network i created on the macmini.
but if i restart the macmini, the network is gone and i have to connect mouse keyboard, sceen, to re create the network!
my problem is that i only have access to my mac mini by wireless network . but i don t want to share internet access. just have a network between two macs , to access to one with share screens.
If i create a network, and then restart, the network is gone. it disappears.
so if i restart my mac mini via screenshare , there is no network. and i can t have access to the mac mini anymore.
how can i keep this created network after restart?
i tried to make it work with automator but kind of didn t make it to work

Do you keep other settings (e.g. in Options) that you make in Firefox?
Create a new profile as a test to check if your current profile is causing the problems.
See "Creating a profile":
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
If the new profile works then you can transfer some files from an existing profile to the new profile, but be careful not to copy corrupted files.
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

Similar Messages

How to keep ical alarms displayed after restarting

I notice that my iCal alarms disappear after quitting iCal or restarting my computer. For example "Call Doctor" shows up today at 8 am when I start work. I shut down for a meeting. I restart and the alarm message is gone. The event is still there. But I might forget to call unless I see the alarm again. I remember Microsoft Entourage did this and I found it very helpful. Is there a way to get this same effect with iCal?

Hi, This is not related to your question about ical alarms, but to a previous post you made when your iweb crashed when saving. I also had to use time machine to transfer all info to a new computer and I am having the same problem when I try to save. I did not completely understand your solution because I am not very savvy with computers. I did go in and change all the permissions to read and write, but I still have the problem. I don't know how to "add my account name to the File Info"-
I just spoke with a supervisor from Apple for two hours and who did not solve the problem. (He thought he did, but he did not and he has not called me back).
If you could give me an explanation of your solution, it would be very helpful and immensely appreciated.
Thank you for any assistance you can give me regarding this. I really need my iweb!
[email protected]
Here is the solution you posted:
I figured it out. It was those permissions. I simply added my account name to the File Info. For some reason the Time Machine restoration did not copy the permission for the package (however the contents had the correct permissions.

How to keep connection of network service in win8.1

Dear sir / madam,
i would like to ask how to keep connection of network service in win8.1, after i logout / switch user/ sleep.
thanks

Hi,
Did you have any issue on your computer?
The network is disconnection when you logged off the computer. This is expected behavior.
The network is stayed connection when you switch the user.
For sleep mode, check the following setting:
right click the network device in Device Manager and go up to the top and hit
Power Management. Then uncheck the box that says "Allow the computer to turn off this device to save power".
Karen Hu
TechNet Community Support

How to keep all my itunes after install of leopard?

Assume I am not all that when it comes to macs. Not new but rusty.
I have tiger with itunes and it has loads of podcasts/albums(rips) etc, and also on my ipod touch. I would like some help as to how do I keep all this after I install leopard. I think I am going for a full install rather than an upgrade.
The mac is an imac with pre-installed tiger. I am sure there is some way of keeping my itunes folder after i wipe the drive but have never done anything beyond fill up ipods with stuff.
I thank you in advance for any pointers.

Hi,
I would suggest backing up your entire iTunes Music folder to an external hard drive or disk if the folder size is practical. To retain your playlists for reimport later on, open iTunes, select the Music Library and choose File->Export Library then save it off system along with the back up.
I recommend using Terminal to back up your iTunes Music folder because Finder's drag and drop can sometimes corrupt copied files, particularly when the directory is large. Suppose you've connected a firewire or usb external hard drive and you can see it mounted on your Desktop, here's what I would do using Terminal (/Applications/Utilities):
Open the directory ~/Music/iTunes/
Open Terminal and type the command scp -r. Now drag in the folder iTunes Music (your copy source). Next drag in the external drive mounted on your Desktop (your copy destination). The Terminal window should now read something similar to this, press Return to start the copy process:
scp -r ~/Music/iTunes/iTunes\ Music /Volumes/External HD
When the process is complete the command prompt will return back to you. If you want to see the copy in progress change scp -r for scp -v -r. The -v makes the process verbose.
I'm with you on choosing a clean install, i choose this method every time for upgrades. Archive and Install presents the possibility of dragging old conflicts back into a clean system.

After setting up airport extreme to my existing wireless network after restart unable to conect even the light is green is telling me need to manage network im usin airport utility in pc

I try to set up my airport extreme thru my existing wifi network using airport utility 5.6 on pc after i was done said that after restarting unable to located extreme to check in my manage networks Ican se green light on extreme but can not find in network to manually add on. Any help woul be appreciated!

If nothing works, try a factory reset: disconnect the Extreme from power, press the reset button, plug in power while still pressing the reset button, release reset button after 5 seconds or so.
This method usually helps me with problems with my Airport Extreme and Express (this happens seldom by the way). The only disadvantage is that you have to set it up again completely.

How do I disable resuming downloads after restarting the browser?

I did find how to prevent resuming downloads after a crash. But how can I disable resuming downloads after a manual resart of the browser?

Hi,
You can try to set [http://kb.mozillazine.org/index.php?title=Browser.download.manager.quitBehavior&redirect=no browser.download.manager.quitBehavior] to '''1''' in [http://kb.mozillazine.org/About:config about:config].
# In the [[Location bar autocomplete|Location bar]], type '''about:config''' and press '''Enter'''. The about:config "''This might void your warranty!''" warning page may appear.
# Click '''I'll be careful, I promise!''', to continue to the about:config page.
[http://kb.mozillazine.org/About:config_entries about:config Entries]
The [https://services.addons.mozilla.org/en-US/firefox/discovery/addon/config-descriptions/ Config Descriptions] add-on adds helpful source comments in about:config.
[https://developer.mozilla.org/en-US/docs/Download_Manager_preferences Download Manager prefs]

Lion: how to keep apps from reopening after I restart

How can I keep previously opened apps from reopening every time I restart. I close the apps before I shut down, and then they reopen after I restart.

The following works for me.
One time only.
Quit all apps before shutdown.
Click shutdown.
Uncheck the reopen box and click shutdown.
From then on.
Quit all apps.
Hold the option button while clicking shutdown.

MSI 870A Fuzion.... BIOS keeps resetting it self after restart,

HI NOOB here
I've just brought my first ever parts for my first ever computer build.....fitted everything perfectly and booted....
1st: logo screen came on
then another screen came saying low battery, thunxsomething...IDE, bios clock unset...."hard drive not detected"
3rd: screen came up asking either f1 to go into bios f2 to load defualts
i pressed f2 little dash flashes in the top corner
rstarted with second {the same procedure as explained }try ubuntu live usb loads......
after shutdown and installation of OS
i attempt to troublkeshoot the issue of bios time, IDE, and no hard drive detected
by going into the bios... which was totally from whats expected i.e. in colomns instead rows
i was expecting bios style shown below however after thought i got adjusted to the new rows one
http://www.tomshardware.com/reviews/x48-motherboard-comparison,1781-5.html
loaded optimal settings, changed bios clock and date, adjusted boot preority
saved AND EXITED
BUT foud that my MSI 870A Fuzion.... BIOS' keeps resetting it self to factory defualt... ,
AND>>>>>>>>>>>>>>>>>>>>>>>>>
also found that it didn't go directly into the NEwly installed OS.....
HELPHELPHELPHELPHELPHELPHELPHELPHELPHELPHELPHELP
I'm its quit anoying knowing that this is my first ever computer build

Quote from: npm1 on 18-November-10, 22:29:03
it restarts as expected but it doesn't save it........and it continues saying no hard disk detected low battery even though its connected to psu and say IDE....even though i have sata connectors......
just as an extra, a small splat of water went on the board i simply wiped it away........(happened before first boot) would this by any chance affect the bios
Quote
it restarts as expected but it doesn't save it........and it continues saying no hard disk detected low battery even though its connected to psu and say IDE....even though i have sata connectors......
what message exactly you are getting at bios post screen?

How to keep items on ATV after deleting them on iTunes library

does anyone know how to delete movies/tv shows on the computer's hard disk/i tunes library without loosing them on the ATV after the next sync. My problem is that I am only using a Laptop and my HD is already full and I want to delete some of my movies/tv shows on it and I want to keep them on the ATV. However even if I go to manual sync and uncheck the specific items ATV will delete these movies from its storage upon the next sync process. So is there a way to keep items on the ATV after deleting them in the iTunes library?

Unfortunately, that's not how it's supposed to work.
The important thing to appreciate is that AppleTV is not like an external storage/backup device as you cannot ordinarily get files from it should you need to transfer them elsewhere or you lose the originals. You must back up anything you'd hate to lose in some other way.
Many of us attach an external USB drive to the computer, migrate the iTunes library to that, and stream most content, however that is less practical with a laptop if you need the laptop to be mobile and to use AppleTv when it's on the move.
One thing you could try is to test delete a file from the iTunes library manually. In that way iTunes still holds a reference to the file but complains it can't find it. Not sure if this still causes file deletion from AppleTV as the item is still referenced in the database but you could try it and see (make sure you copy the file somewhere safe first!).
AC
Message was edited by: Alley_Cat

How do web site created with After Effect differ from that created with dream weaver or Flash?

As I have some experiance not much in After Effect..I have created my website in After Effect., I have no knowledge of Dream weaver or Flash.. My web pages take too much time to open., due to it loads SHOCK WAVE and it take much longer time., were as I see many a website created in other software opens prety fast. As such I want to know whether creating website in After effect is right or not., and how to speed up

You do not create websites in AE, you can create at best animations and that is what you ahev done - produce a fat SWF file. You are really using the wrong tool and should better spend your time on learning HTML and CSS proper and do your website in Dreamweaver or otehr web design tools. And no, Flash is not a website design tool, either.
Mylenium

[SOLVED] how to keep urxvt / xterm scrollback after ssh exit

Hey Guys,
Would really appreciate some help. How do you keep the scrollback history in urxvt after exiting a ssh session? After closing the SSH session it appears to do a reset (the inital ssh command is not even shown, but all command prior to ssh are still in scrollback). xterm does the same thing, but terminator keeps the scrollback after exit.
[Unit]
Description=RXVT-Unicode Daemon
[Service]
Type=oneshot
RemainAfterExit=yes
User=%i
ExecStart=/usr/bin/urxvtd -q -f -o
[Install]
WantedBy=multi-user.target
URxvt*font: xft:Ubuntu Mono-12
URxvt*boldFont: xft:Ubuntu Mono-12
URxvt.talicFont: xft:Ubuntu Mono-12
URxvt.bolditalicFont: xft:Ubuntu Mono-12
URxvt*letterSpace: -1
Urxvt.depth: 32
URxvt.colorDB: white
URxvt.colorIT: #87af5f
URxvt.colorBD: #d7d7d7
URxvt.colorUL: #87afd7
URxvt*termName: xterm-256color
URxvt.urgentOnBell: True
URxvt*saveLines: 32767
URxvt*scrollBar: false
URxvt*scrollBar_right: false
URxvt*skipScroll: false
URxvt*jumpScroll: true
URxvt*loginShell: true
URxvt*fading: 20
URxvt*secondaryScroll: true
URxvt*visualBell: true
URxvt.perl-ext-common: default,keyboard-select,url-select,selection-to-clipboard
-J
Last edited by V31GN (2014-08-06 20:45:22)

Glad you got it sorted: please use code tags when pasting ot the boards
https://wiki.archlinux.org/index.php/Fo … s_and_Code

How to add video created in After Effects or Premiere to a Captivate project?

I’m new to Captivate. I received a .cpvc file which is basically a screen capture of using a website. I can create animation of a company logo, and other effects using After effects and I also have Premier. I need to integrate this with the .cpvc presentation.
What is the best way to do this with the minimum loss of quality of the content created with Captivate and After Effects or Premiere?

Hi,
From your description, my understanding is that you want to use video tag in your Office 365.
You should check the video type in your issue, video tag only support mp4 file which you could refer to this article:http://www.w3schools.com/tags/tag_video.asp.
In addition, you could refer to these articles:
Video Player for SharePoint 2013 and Office 365
http://sharepointroot.com/2014/01/22/video-player-for-sharepoint-2013-and-office-365-2/
how to play a video in sharepoint 2013 foundation version
https://social.msdn.microsoft.com/Forums/sharepoint/en-US/2818becf-e132-4b9a-b50f-8990fa28cf88/how-to-play-a-video-in-sharepoint-2013-foundation-version?forum=appsforsharepoint.
Best Regards
Vincent Han
TechNet Community Support

Time Machine Keeps Selecting Different Drive After Restart

Here is my situation, which is a bit different from most people's I think:
I have a Mac Pro running 10.5.5 with 4 internal hard drives: 250GB Original, 750GB, 750GB, and a 500GB. I also have a MacBook. I used to have things setup so that my iTunes for the Macbook was stored over the network on a 750GB drive, and the Mac Pro AND the Macbook had their Time Machine files on the 500GB.
Then I switched things around so that the iTunes is now on the 500GB and the Time Machine is on a 750GB. I used "restore" in disk utility to copy over the Time Machine files (although this worked it could only be done a specific way after much trial and error - ask for details if interested). It worked, and the Mac Pro backs up flawlessly right where it left off on the new drive.
The Macbook WILL find and load the old sparse file from its new location. But I have to manually select it EVERY TIME. The problem is that despite the fact that I completely erased the 500GB drive first, it stills defaults to that drive for TM. AND this is AFTER I have thrown out the time machine preferences from the library. It will work fine for infinite backups as long as I don't shut down the computer. As soon as I restart, it defaults back to the other drive and I have to repeat that cycle all over again of throwing out the preferences, changing the TM disk, and it is never easy to get it to "see" the drive I want...etc.
Any thoughts much appreciated!

Glenn,
Thanks so much for your reply. Unfortunately that did not work. As soon as I connect to my iTunes drive, I can see the name of the backups volume change in the TM preferences pane from "backups" (what it should be) to "music."
In the interest of presenting as much info as possible, I will add that I always have to select my iTunes folder before opening the Itunes app. I had it set up before (when drives were reversed) so that my "music" volume would open as a login item, since I was tired of doing it manually every time. The TM just mounted normally whenever it needed to. It worked perfectly. I thought that maybe I could fix this current problem by having BOTH my music and backups volumes mount at startup. Interestingly, even if I select them both, the mac will only mount one or the other, not both - in fact one of the drives disappears from the accounts>login items pane after startup as if I had never put it there! It CAN mount two drives though if I select another, third drive that I also have shared that is neither for music or backups. Just not THESE two. I am at a loss....I am pretty sure I erased these drives before making the switch - I know one of them I even wrote to zeros.... Thanks again.

How to keep Motion created titles looking sharp on final DVD?

Hello again... I'm having trouble keeping my motion created titles looking sharp on the final DVDSP project. Im exporting a title sequence out of motion into fcp and then exporting the full project via compressor for burn in DVDSP. I'm familiar with the usual temporary quality loss of titles generated with FCP or Livetype while viewing them within the FCP, Compressor, or DVDSP preview, and understand that once they are compressed and viewed on the TV they look great, but for some reason i can't get my motion created titles to do the same.
Out of Motion- i'm using the preset QT settings on the highest quality. Should i use a different setting out of Motion, perhaps an uncompressed QT or via compressor?

Thanks- i'm trying that now. And by the way.... sorry about the misunderstanding. I am exporting out of motion onto my desktop, and then importing the project using FCP.

Dynadock V Keeps Updating same driver after restart and wont connect to external monitor

Earlier this week dynadock did an update and now everytime my computer turns on it installs the same update and says successfully installed. Ever since this started my second monitor connected through dynadock is not working. I've checked cords, cycled power to everything and still the same.

Performed system restore as far back as it would allow me, but i do not believe that it was far enough. Still had same problem. I attempted to uninstall only the video driver, and it failed, so i attempted to uninstall all of dynadock and everything but video driver uninstalled it failed again. restarted tried again failed again. So i'm running the install cd now see if maybe i'll get lucky and it'll work it'self out. but i doubt it.
Any idea how to get the video driver uninstalled? I can't find it under device manager either.

How to keep my created network after restart

Similar Messages

Maybe you are looking for