How to keep screen on top of others

Hi there,
I'm not sure if this is posted already. If it is I apologise.
I have a question which is to do with keeping one screen on top. By this I mean that I would like to watch a movie (keeping this on top)
and at the same time I would like to maybe do my work, play another game or something that is multi-tasking.
I can't stagger the windows around the screen because the screen sizes are locked... so is it possible if I can keep one screen locked on top of another? instead of staggering them around the screen?
I hope my questions is easy to understand. I'm not usually good with technical terminology. Thank you in advance! 
Kind Regards
Anthony Reid

Settings>General>Auto-Lock>Never.

Similar Messages

  • FF4.0 Windows XPv3 drag tab to 2nd screen, drag bar off screen at top, close other browser window, shuts down both browser instances. BTW, look at how SAFARI does the drag tab to other screen, that is how!

    FF4, drag 2nd tab to new window.
    2. top dragbar is off screen at top. I unmaximize the original screen, now that one also pushes the drag bar to the top off the screen. I resize the bottom of the screen and I can see a sliver of the top dragbar. If I close one browser window, both shut down. Auch!
    Please take a look at how safari renders a second browser window when you drag one tab to the other window. Cool!

    FF4, drag 2nd tab to new window.
    2. top dragbar is off screen at top. I unmaximize the original screen, now that one also pushes the drag bar to the top off the screen. I resize the bottom of the screen and I can see a sliver of the top dragbar. If I close one browser window, both shut down. Auch!
    Please take a look at how safari renders a second browser window when you drag one tab to the other window. Cool!

  • How to keep screen on while charging

    how to keep the screen on the iphone while it is charging

    Settings>General>Auto-Lock>Never.

  • How to keep adjustment layers separate from other layers (PSE8)?

    I'd appreciate some guidance on how to keep the adjustment layers for a standard layer from adjusting the background (lowest) layer.
    Scenario:
    I've created a solid background layer to serve as a backdrop for the image of a small sculpture. Above the background layer is a layer of just the sculpture image. Above the layer of the sculpture image are a number of adjustment layers that are meant to apply to the sculpture layer only. I'd like to know how to keep the upper adjustment layers from adjusting the background (lowest) layer.
    Thanks

      Highlight each adjustment layer (Ctrl+Click) in the layers pallet
    Then press Ctrl +G
    The thumbnail icons should move slightly right with a downward arrow indicating clipping to the sculpture layer below.
     

  • How to keep firefox on top when veiwing other web pages?

    i just installed a dish receiver with sling and would like to watch tv in the corner of the computer screen and browse with a second window. but as soon as i do anything on the second window the tv window is gone from viewing.

    You can use an extension to set a default font size and page zoom on web pages.
    *Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/
    *NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/

  • How to keep SCROLLING AT TOP

    I have a JScrollPane in which I put JTextArea and it goes always
    to the end. How can I keep scrolling at the top of the pane?
    Thanks alot
    Tamer

    Use the "setCaretPosition(int)" method of JTextArea and set it to 0.

  • How to keep the horizontal top column letters and left row numbers????

    When working on a table, there is a vertical column on the left of the row numbers and a row across the top with letters that identify columns. I would like to keep this (as in Appleworks) but whenever I click on the table, or use Print View, or Print, these two identifying features disappear! I have tried everything to keep them, but no luck. Is there any way to do this?
    thanks

    Hello
    may you take care of the existence of the Search field on the right side of this forum?
    may you also look at the already existing threads (at least in the first two pages).
    Your question is available four or five rows below yours.
    Using it with the button more options and selecting The Numbers forum
    enter the keywords lock AND title .
    You will discover that yoy may get quick respnce to a lot of questions without asking for them in the forums.
    I know that some posters dislike this kind of response.
    I think that it's more useful to teach how to fish than to give a fish
    Yvan KOENIG (from FRANCE mercredi 23 janvier 2008 15:52:01)

  • How to keep screen from flashing?

    The built-in monitor on my MacBook Air flashes to full painful brightness when I disconnect from an external monitor. How do I avoid this? I have visual issues and bright lights and flashing lights are both very painful.

    Michael Levin wrote:
    Ok, but no way to leave the timer visible in the lock screen?
    No
    And, if I turn off the autolock, won't the screen still dim (and then go off) after a while?
    No, if you set it to never, then the screen will never dim.

  • How to keep a printer invisible to other part of network

    I share a cable modem line with a suite mate (professional office). my equipment is plugged into my switch, and the switch is also receiving a feed from the cable modem. When my suite-mate had someone print some work, that work went to my printer instead of the suite-mate's printer. How do I make sure that my printer never appears as an available option? I am using Mac OS 10.7.5 and the suite-mate is using Windows XP through WIndows 8. In fact, this situation is a cause for concern, because we both need to assure that no other parties can wander into and through our files. This isn't the first time this has happened.

    At its simplest, you'll partition your network.  That can be via a managed switch with vLAN support, or by connecting up an IP router which will inherently block the typical Bonjour traffic — which is likely how the printer is being detected here — or via a firewall connected at the cable modem and particularly that has support for multiple network segments and run those to the different areas (which will keep the networks quite separate). 
    Of these, the latter probably most closely meets your needs; the firewall.  Particularly because that can be configured to block other traffic between the LANs; more than just the Bonjour chatter will be blocked.  Locally, I'm using various ZyXEL ZYWALL USG series firewalls, which does have support for multiple local networks (two LANs plus a DMZ are common on various of the low- to mid-range models).  (I've not tried the USG without NAT, but the device does have options to do that.)
    You don't want to have two devices both doing NAT here, so either disable NAT at the cable modem and use a firewall that does NAT, or — if you can't switch the cable modem into its bridge mode, or the modem doesn't support bridging — then you'll have to avoid allowing any NAT at your firewall.

  • How to keep screen on while using Sprint Navigation?

    I have the problem where the BB screen goes black after several seconds without use. How do I stop this from happening when I am using Sprint Navigation? I've looked in Options/Adv. Options to no avail. Please advise.

    Bifocals wrote:
    You might try BBLIGHT it's freeware and you can set parameters for your backlght to stay on longer.
    Here is the link:
     http://www.blackberryfreaks.com/BBlight.html
    Please let me know if this resolves the issue, or if you need more information!
     That copy is old (1.82), go to BlackBerryForums for the latest version (1.85) of BBLight. One of the BBF members updated BBlight earlier this year.

  • How to keep screen appearance of pro 6.0 & 8.0 when using X-pro

    I've installed x-pro, each new pdf now opens opens a new screen window.
    My old versions 6.0 - 8.0 have the "classic" screen appearance with all pdfs opening in same window with option to view each doc within same window.
    I'd also like the look of the old style toolbars.
    Can I customise x-pro to give me the screen view and tool bars I'm used to from my earlier versions of pro?

    You have a lot less control over the toolbars with Acrobat 10.You can configure the QuickTools toolbar by adding tools to it, but that's it.
    Acrobat 9 introduced the multiple document interface (MDI), and it is all that's available.

  • How to keep screen on while reading something

    While reading some detailed articles on the web in Safari,I face a lot of problem.The screen goes dim and then turns off.
    Is there any way by which I can program my mac in such a way that it automatically detects that I am reading some article and the screen doesn't off or go dim ??
    Thanks

    I don't know of any software that detects when you're reading the screen - that's not to say some doesn't exist.
    I'm sure there used to be an option to elect whether the screen should dim before sleeping/screen saving, but I can't actually find it. I'm on an iMac, maybe it's laptop specific and I haven't got one any more to check.
    At least if it dims first you've got the chance to touch a key/mouse/trackpad to prevent it sleeping.

  • HOW TO KEEP SCREEN ON WHEN USING GPS OR SHOOTING THE VIDEO

    I was wondering if there any setting I could leave the screen on when using GPS or shooting the video, I'm currently set backlight timeout is 2 mins. After 2 mins device will automatically out and I have to reenter the password for continue my video, This is very inconvenience when using GPS or shooting the video.  
    Is there any one out there can assist? thanks in advance. 

    Did you get an answer?

  • Keep QT on top

    Is it possible to keep QuickTime on top of other windows at all times?

    You can turn off a preference in FCP's user prefs, to bring all windows to front on activation. That way only the windows you click on come in front of the DVD player.
    But probably a better way to handle the problem is to use the tab+apple key to bounce back and forth between the two apps. Try that...
    My book will work just fine in FCP 5, comes with a ton of media to work with, and will hone your skills I think.
    Also Apple's Pro Training series is much the same, and are written well. I'm working now on a training DVD...
    Jerry

  • How can I get an album to play in order on Itunes?  The songs keep skipping all around to other albums that I did not want to listen to at that time?

    How can I get an album to play in order on Itunes?  The songs keep skipping all around to other albums that I did not want to listen to at that time?

    It sounds like you might have the shuffle button at the bottom left of the iTunes (the button with the squiggly lines).
    If that's not the case, then maybe you just need to sort your library by album by clicking the album tab at the top.
    Is your music in a playlist, or are you trying to play it from the entire library?

Maybe you are looking for