How to keep session open in hibernate to avoid lazyinitializationexception

how to keep session open in hibernate to avoid lazyinitializationexception - please suggest a simple solution ....

Are we talking about Spring here?
Then this document is going to save you:
http://www.jroller.com/kbaum/entry/orm_lazy_initialization_with_dao

Similar Messages

Why does the wheel for the apps close and how to keep it open?

why does the wheel for the apps on the tool bar close and how to keep it open? i've checked thru all the information on your site..

Exactly which driver did you downlaod and from where? By "GET STRAT", do you mean one of the Getting Started VIs? Error 5 means "NI-488: Command requires GPIB Controller to be System Controller." Are you using GPIB to control the instrument? If so, what type of board are you using and which version of VISA and NI-488? If the error only occurs on a read, try issuing the query from MAX and see if the error occurs there. In a couple of the Xantrex drivers I looked at, there seemed to be some fixed delays after a write and before a read. You might try increasing those values to see if that makes any difference.

How to Keep popupButton open to allow multiselect

I have a popup button Having check box in it ..
It is in Header Rendere of the column ..
I want to keep it open For multiselect ...
How Can I do that??
TIA

Are we talking about Spring here?
Then this document is going to save you:
http://www.jroller.com/kbaum/entry/orm_lazy_initialization_with_dao

How to keep NAT OPEN.

I've been having some trouble with NAT for awhile now. I've mostly been having trouble because of my Xbox 360. When I look at the NAT type it says strict. I want to know how to get it to say OPEN. I've mostly been messing around with the Time Capsule trying different things, it worked once, but now it switched back to strict. Thanks!

Please click on the tab "Application and gaming" and click on sub
tab "Port range forwarding"
1) On the first line in Application box type in "Xbox", in start box
type in 88, in end box type in 88, in protocol keep it both, in ip
address type in 192.168.1.20 and give a check mark on enable box.
2)   On the second line in Application box type in "Xbox", in start box
type in 3074, in end box type in 3074, in protocol keep it both, in ip
address type in 192.168.1.20 and give a check mark on enable box.
3) Now save the settings
4) Once you return to the setup page, click on the tab "Administration"
and disable the UPNP and save the settings.
5) Now assign the given ip address on your xbox
   ip address :- 192.168.1.20
   subnet mask :- 255.255.255.0
   default gateway :- 192.168.1.1
Please assign the dns address on the xbox
primary dns :- 4.2.2.2
secondary dns :- 192.168.1.1
6) Please try to test your xbox live.

ITunes 12--How to keep iPod open in sidebar?

I upgraded to iTunes 12, and mores the pity. How do I keep my iPod open on the sidebar so that I can drag songs to my playlists? It closes after every "drag," so I have to keep clicking the arrow to open it again, which is a real drag.
Thanks in advance!

The Playlist Shuffle button hasn't gone anywhere:
Cheers,
GB

WOW Final CUT PRO Training DVDS! MORE? How to keep QT open (on top) more?

1st of, I've seen the Lynda training for FCP but really enjoy the training DVD's with the surfer (Into The Blue)...
Where can I get more training video DVD's with files like this to help me and build a reel?
Also, part II, is there a way if using a MBP to keep QT DVD ontop so I don't have to keep APPLE TAB to get back to the training DVD? My work flow is follow along and pause DVD then go back, etc.
Thanks!
I am prediciting with OctoMACS due out next year or end of this year, FCP is going to make a splash in some of the AVID marketshare (most of television work that I have seen)..and want to get a jump on FCP.
Thanks!!!!!!!!!!!!
I would love to also know as mentioned above, some good books with DVD and project files thanks!

You can turn off a preference in FCP's user prefs, to bring all windows to front on activation. That way only the windows you click on come in front of the DVD player.
But probably a better way to handle the problem is to use the tab+apple key to bounce back and forth between the two apps. Try that...
My book will work just fine in FCP 5, comes with a ton of media to work with, and will hone your skills I think.
Also Apple's Pro Training series is much the same, and are written well. I'm working now on a training DVD...
Jerry

Afraid to upgrade to LR4- how to keep option open to revert to LR3?

Due to reports of poor LR4 performance, I am afraid to upgrade. But because of my desire to use some LR4 presets, I think I want to try it. What steps do I need to take when I upgrade to preserve the option to return to LR3 if LR4 doesn't work well for my system?

mistyprochaska wrote:
Due to reports of poor LR4 performance, I am afraid to upgrade. But because of my desire to use some LR4 presets, I think I want to try it. What steps do I need to take when I upgrade to preserve the option to return to LR3 if LR4 doesn't work well for my system?
Adding to the wise words above, it is generally true that you can roll back to your previous “state” if you retain your LR3 catalogue just prior to the upgrade. However, if you use publishing services of any kind (Flickr, SmugMug etc) then keep in mind that your estate is more than just the LR database and images on your hard drive and includes these external things as well.
If you use these services, it may be prudent to consider their use or not in LR 4 until you are confident you will not want to roll back, or have considered the implications of it.

How to make Firefox open automatically a new, empty tab in each start, but keep last sessions?

How to make Firefox open automatically a new, empty tab in each start? (keep last sessions as well) It will be good, because Firefox wont load the previous sessions last watched tab after start straight away, but keep my previous sessions tab as well in the browser.

Hello,
You can change your home page settings to open a blank tab:
* Tools (or [[Image: New Fx Menu]]) > Options > General
* Beside "Startup", change to "Show a blank tab"
* See the article [[Startup, home page and download settings]] for more information
To retrieve your previous browsing session, first make sure that you are not running in [[Private Browsing - Browse the web without saving information about the sites you visit|Private Browsing mode]]. When you start Firefox, to recover your previous session, you can go to:
* History (or [[Image: New Fx Menu]] > History) > Restore Previous Session
* Please see [[Restore previous session - Configure when Firefox shows your most recent tabs and windows]] for more information

Session state consistency - how does APEX keep session state across pages

I would like to know how the APEX develper tool keeps session state from being overwritten across mutiltple pages in the same Session. Because this is difficult to explain I'll use an example from withing the APEX dev tool
For Example:
1. I navigate to the page (4150) thet allows me to edit my Page 880 [Window 1]
2. I now do a Cntrl^N to Open a New Window in the same session (this opens on the same Page 880 in the new window) [Window 2].
3. In Window 1, I click an item to update ie I want to put a comment on the Unconditional Branch so click this to go to the Update page. I see the F4000_P4313_ID is passed in the URL (ie the context, UID of the Branch).
4. In Window 2, I change the page to 881 - ie this is overwriting my Session State variables for page 880 with page 881.
5. I click an item in Page 881 to update ie I want to put a comment on the Unconditional Branch so click this to go to the Update page. I see the F4000_P4313_ID is passed in the URL (ie the context, teh UID of the Branch).
6. In Window 1 (the Page 880), I add a comment to the Branch and 'Apply' changes. On returning to the Page the context has changed from 880 to 881 (as expected as Window 2 had overwritten the session state). Slightly confusing for the user as they did go from Page 880 not 881 but ok
What intrigues me is how the Edit Branch page applied the update to the correct branch [good !]. Why weren't the Branch Session state variables (ie the Branch for Page 880) overwritten with the Branch Session state variables for the Branch from Page 881 ?
Both navigations go to the same Page passing the UID of the branch, hence I would of thought the last navigation is the one that would be persisting (ie from Page 881 Window) ?
Any tips on preventing users updating the wrong record because of the Session State being overwritten would be most welcome.
Look forward to hearing from you.

Let me take a shot at explaining this.
Session state is stored in Oracle database tables. When a APEX page is rendered, those tables are read and the HTML is sent to the browser. When that page is submitted, all the HTML form inputs on the page are saved back into session state over-writing any existing values for that session
So, in your example, since Page 4313 has the hidden page item (the "GUID" of the branch), it doesn't matter if any other window has the same page open with some other GUID. Each page is a self-contained "unit" which has all the information necessary to properly process that page when it is submitted.
Think of it this way...in your example, when you have windows 1 and 2 open (window 2 was opened after window 1), go back to Window 1 and click the browser's Reload/Refresh button. Instead of refreshing the same page (branch 9000000), you will find that it will load branch 8000000! This is because session state is read from the database and when Window 2 was rendered, it has set F4000_P4313_ID in session state to 8000000.
Hope this helps.

I like to keep 2 sessions open, but today a new session opens with blank page and no bookmarks - why?

I keep a session open pretty much all day but minimize it when I leave so someone else can use a session for whatever they want. Today when I open a new session (while mine is minimized) the page is blank and there are no bookmarks. I can hit the home icon and go to view and see my bookmarks but this is a pain

Hey mate,
I was having the same problem. If you upgraded to Lion - apparently there is a 'general tab' in the system preferences that has a box that you need to un check. (The box says something about restoring all last windows from last session)
If you updated Safari but are not using Lion, here is how to fix it. Simply delete this item fromyour Mac HD and restart Safari.
[USERHOME]/library/preferences/com.apple.safari.plist
Hope this helps... It worked for me!

How to keep that valve open for certain period of time and shut off automatically

Hi everyone,
The objective of the VI is to measure pH and then open acid or base valve based on pH valve. Below is my UNFINISHED VI
My question is: if, for example, the pH is 10, then, the program will open acidic valve for 5 seconds and then shut off automatically. After that, wait for 5 second. this process will go on and on as I use while loop, but I just dont know how to control the valve on for 5sec and off and then wait for 5sec.
Anyone can help me out? Thank you very much
In the picture, please enter those values before running
P.S The VI is based on previously posted vi by someone who made it 1 yrs ago.
Attachments:
project_trial_1_26.vi ‏27 KB
Capture.JPG ‏79 KB

1. The reason the valves close immediately is that the Elapsed Time VI does not cause any wait, it only measures the time. So the valves closed within a small fraction of a second of the time they opened.
2. I modified your VI to wait until the Elapsed Time has ended. See the "wait" state. I probably modified some of your other functionality in the process, but this shows one way you could do the timing.
3. You do not need any Value property nodes. They should never be used if the value can be wired directly.
4. You do not need any sequence structures. Dataflow will determine the order of things occurring.
5. If you use an enum for the state machine (and it is a good way to name and select states), you should make it a type def. Then when you need to change it as I did to add several states, you only need to change the Type Def in one place and the changes propagate through to every place you used the control or constants derived from it.
6. I added a Halt state which will close both valves before stopping the program. When you are controlling a real world process, it is important to consider the start up and shutdown requirements. For example the digital outputs of the USB-6008 default to inputs when the device is first powered up. And, the inputs are pulled high by a 4700 ohm resistor (at least I think I recall that value). Will this open your valves before the program starts running and sets the I/O lines to outputs and forces them low?
The USB-6008 has rather limited drive on the digital lines. You will probably need a buffer between it and the valve coils.
PID and PWM are more complicated than I want to get into here. First, are your valves proportional or on/off? Second, (assuming that they are on/off) how fast can you open and close them without destroying them in the first week? What is their expected lifetime in terms of the number of operations? How fast do you need to be able to change them to keep your pH where you want it? Are these values compatible?
Lynn
Attachments:
pH State.ctl ‏12 KB
project_trial_1_28.2.vi ‏66 KB

Have a new PC desktop with 4 hard drives, new c, d and old c, d, My ipad library is in old c, how to get my itune open the right drive, it keeps on open in new c drive.

Have a new PC desktop with 4 hard drives, new c, d and old c, d, My ipad library is in old c, how to get my itune open the right drive, it keeps on open in new c drive. It said my computer is not authorized. I want to move all the old c to the new c drive, or get the itune to open my old c drive when I log in.

might be some help on one of these links.
Windows - Change iPad default backup location
http://apple-ipad-tablet-help.blogspot.com/2010/07/change-ipad-default-backup-lo cation.html
Windows - Changing IPhone and iPad backup location
http://goodstuff2share.wordpress.com/2011/05/22/changing-iphone-and-ipad-backup- location/
Sync Your iOS Device with a New Computer Without Losing Data
http://www.howtogeek.com/104298/sync-your-ios-device-with-a-new-computer-without -losing-data/
Syncing to a "New" Computer or replacing a "crashed" Hard Drive
https://discussions.apple.com/docs/DOC-3141
 Cheers, Tom

I keep Mail open on my MacBook Pro and prior to Mavericks items would open on my 27" secondary display. How can I make this happen in Mavericks?

I keep Mail open on my MacBook Pro and prior to Mavericks items would open on my 27" secondary display. How can I make this happen in Mavericks?

In System Preferences > Mission Control, uncheck mark Displays have seperate windows. This should bring you back to the secondary display you had before the upgrade. You may have to open Mail, the first time and place it on your secondary display. You also won't have the advantages of the dock and menus on the secondary display.
I keep my own secondary display with these settings because I need the ability to expand a window across both displays.

How do I keep forms opened on the web - if they close themselves at times

How do I keep forms opened on the web - if they close themselves??

Hi,
When you have completed design your form on design tab, you may open form to filling out and submit. At this time, if you don’t change your form, it will keep the open state. if you change or edit your form, it will showing a warning dialog to let you know form will be changed to closed, and remind you to open it again.
Thanks,
Guanshuai

How to keep finder in mountain lion from opening at startup

How to keep finder in mountain lion from opening at startup.?

Now you got me thinking....
One can set things up so Finder can be quit like any other application. In Terminal:
defaults write com.apple.finder QuitMenuItem 1
Then relaunch the Finder.
I guess it might be possible to make a an Applescript or Automator application which runs at start up and quits the Finder.
charlie

How to keep session open in hibernate to avoid lazyinitializationexception

Similar Messages

Maybe you are looking for