How to keep the Book panel in the same location after saving the book

I almost always have the Book panel open. I like to dock all the panels, including the Book panel, at the right edge of the workspace. But whenever I save a book file, the Book panel reappears in the middle of my screen. I then have to drag it back over to the right edge of the workspace, where I want it to be. Is there any way to keep the Book panel where I put it (whether docked, or floating)?

This is simply a "ditto" to the problem; it's a major irritation not to be able to save this as part of the workspace--but to have to drag the book panel to the side every single time. Frustrating.

Similar Messages

  • How to keep the waveform chart updated when changing states in state machine/

    Hello Everyone,
                           Can anyone please sugest me how to keep the waveform chart updated even if I am changing the states in a state machine??
    I am having analog inputs on the waveform chart...
    Thanks in advance...
    Now on LabVIEW 10.0 on Win7

    hello guys,
                    thanks a lot for the suggestions, here is the attached code... please follow the following steps to run it..
    ONce you hit play,press either Start Main/Cyl UP button on the front panel,
    once you start observing the waveforms, you can press the Cyl_Dwn button on the front panel... You can observe that the state changes to Start Counter state,
    and the waveform chart also stops updating... I would like both the waveform charts to conitnuously show the data even if the state is changed....
    Now on LabVIEW 10.0 on Win7
    Attachments:
    Soda Vending MAchine.vi ‏212 KB

  • How to keep the WBS & Order in account assignment tab of SD contract item?

    Hi Experts,
    If I remove the plant from the shipping tab in the contract item (the contract type is WV), I will be able to enter the WBS or Order in accounting assignment tab. However, if I enter the plant (in order to determine the tax in pricing), the WBS and Order are disappered and there is one new settlement rule button showed up.
    Do you know any configuration could keep the WBS and order in the accounting assigment tab even the plant is there.
    Thanks in advance!
    Norman

    Hi Chandra,
    Thanks for your answer. However, I even added the plant in the WBS, the tax (we use tax jurisdiction) still could not be determined.
    The problem is that SAP changes the account assignment tab screen (it suppresses the WBS and Order fields, but addes settlement rule) with the plant in the shipping tab. Do you know how to keep the same account assignment tab screen with the plant in the shipping tab?
    Thanks,
    Norman

  • How to keep the data entered on a page apex

    how to keep the data entered on a page apex
    so, I've got a registration page then wish go to another page P2 and I return to this P1 without losing data

    Hi,
    As long as the registration page is within the same session, the values will remain in the session until they are specifically cleared out. This can be done by a process on a page - so check if you have a "reset page" process on P1 and, if you do, delete it. This can also be done on a branch - so check the branch that takes you to P2 and see if there is anything entered in the Clear Cache setting and, if it shows *1*, remove that. There are other ways as well, but these are most typical.
    Andy

  • How to keep the filtered output in a page after user navigates back?

    How to keep the filtered output in a page after user navigates back to all records from another page.
    Currently it clears the search

    Hi,
    user13091824 wrote:
    How to keep the filtered output in a page after user navigates back to all records from another page.
    Currently it clears the search---While returing from page AM Return status should be True in pageContext.setForwardURL.:::
    pageContext.setForwardURL("OA.jsp?page=/XXX/oracle/apps/po/msg/webui/SearchPG",
    "SUPP_SEARCH",
    OAWebBeanConstants.GUESS_MENU_CONTEXT,
    null,
    null,
    true, // Retain AM
    OAWebBeanConstants.ADD_BREAD_CRUMB_NO,
    OAWebBeanConstants.IGNORE_MESSAGES);
    ---After setting AM Status to true u can able to c the values.
    Regards
    Meher Irk

  • HT202213 how to keep the songs on your iphone

    i have itunes home sharing i would like to know how to keep the songs on your iphone after you turn home sharing off or get out of range.

    You sync them via iTunes.
    You canot copy them to the iPhone using Home Sharing.

  • The popup window won't open at a normal size. Any ideas on how to keep the popup window a normal size when opening?

    I recently did the latest update for my MacBook Air and when I use a specific website it won't open the popup blocker at a normal size. Any ideas on how to keep the popup blocker at the size that I select?

    This is a user to user forum and Adobe Staff does drop by.
    First thing to try is Reset the Type Tool by right-clicking on its' icon in the Options bar.
    If you still have problems, it could be related to fonts. Here is a step by step troubleshooting help doc for that.
    Troubleshoot fonts | Photoshop CC 2014, CC, CS6, CS5
    And basic troubleshooting: Photoshop: Basic Troubleshooting steps to fix most issues
    Gene

  • How to keep the field open for input with error message in report program

    Hi,
      Need a help in solving the below issue.
    "How to keep the field open for input with error message in report program"
    Regards,
    C.Shasiraj.

    Hi...
    you have to use the event:
    <b>AT SELECTION-SCREEN ON <FIELD> EVENT.</b>
    u have to give an error message in this event.
    Consider the following <b>Example:</b>
    <b>PARAMETERS : NUMBER TYPE I.
    AT SELECTION-SCREEN ON NUMBER.
      IF NUMBER = 10.
        MESSAGE 'Number vakue is 10' TYPE 'E'.
      ENDIF.
    START-OF-SELECTION.
      WRITE NUMBER.
    </b>
    in this if u give the value of number = 10, it will not proceed further, if u give some other value other than 10 you will proceed further...
    Execute this program once u will understand....
    also Consider the following links :
    <b>Regarding events:</b>
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/79/34a237d9b511d1950e0000e8353423/frameset.htm
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/79/34a23ad9b511d1950e0000e8353423/frameset.htm
    <b>Regarding messages:</b>
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/c5/aa575426ad11d2954d0000e8353423/frameset.htm
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/c5/aa575426ad11d2954d0000e8353423/frameset.htm
    This is very useful.......
    Reward points if useful....
    Suresh....

  • How to keep the Recent Call Record more than a week?

    How to keep the Recent Call Record more than a week? I found the iPhone only can keep the Recent Call Record for only a week.

    I have to disagree with your response with respect. My i phone is limiting me to call going back only 7 days ie today is 29 July and my call log will only go back to 22 July. I have only 40 calls logged for that period. I cannot view up to the 100 you mention. I have included all calls for a single caller as well ie one caller shows 7 so ive counted that as 7 calls. There appears no way to set up to 100 in the settings
    Thanks
    Graham

  • Does Anybody know how to keep the license files and Certificates in ISE-3315 During the upgrade.

    Hi,
    I have two ISE-3315 Appliances in production network.
    I need someone's help to explain, how to make the Secondary node as the primary admin note to reset-config.
    And then I would like to know how to keep the license files and Certificate during the Upgrade.
    Please help me to answer my questions.
    Thanks
    CSCO11872447

    The Cisco Identity Services Engine (ISE) provides distributed  deployment of runtime services with centralized configuration and  management. Multiple nodes can be deployed together in a distributed  fashion to support failover.
    If you register a  secondary Monitoring ISE node, it is recommended that you first back up  the primary Monitoring ISE node and then restore the data to the new  secondary Monitoring ISE node. This ensures that the history of the  primary Monitoring ISE node is in sync with the new secondary node as  new changes are replicated.
    Please  Check the below configuration guide for Secondary ISE- Nodes.
    http://www.cisco.com/en/US/docs/security/ise/1.0/user_guide/ise10_dis_deploy.pdf

  • How to keep the highlight when the JTextComponent lose focus?

    I wanted to do some basic copy/cut/paste on the JTextPane from the Menu. But when I selected the menu, the highlight disappeared. How do keep the highlight?
    The only topic I found about this was here:
    http://forum.java.sun.com/thread.jsp?forum=57&thread=214931
    but it appeared intimidating and not exactly what I needed.

    Most javax objects will accept things in <html> tags why don't you try setting them onto the JTextPane (never tried this btw but should be worth a try) using html and the transferring the same syntax to the output email

  • How to keep the current http session after returning from external web site

    Hi,
    When I use the response.sendRedirect api to redirect the web page to the external payment site, after payment and return back to the current application, I found that the current http session is lost.
    How to keep the current http session after returning from external web site?
    Thanks

    You should make your sidebar1 and sidebar2 fixed positioned. Make your content DIV fluid.
    This should help you: http://www.glish.com/css/7.asp

  • How to keep the doucuments in ep

    Hi Experts,
    how to keep the documents in Enterprise portal?
    and this douments will be seen to allthe employees.
    how we will do this?
    Thanks in advance
    Regards,
    Sid

    Hi Sid,
    I'm not sure what your problem is, but maybe you are searching for something like KM.
    KM is Knowledge Management and gives you a highly configurable User Interface to access various document repositories.
    KM is shipped with EP.
    See [this|http://help.sap.com/saphelp_nw70/helpdata/EN/4c/9d953fc405330ee10000000a114084/frameset.htm] link for futher information.
    HTH,
    Carsten

  • How to keep the MB powered on with Lid closed

    How to keep the MB powered on with Lid closed and no monitor connected?

    You can't. And you shouldn't due to heating issues.
    There are however 'hacks' that allow you to bypass
    this.
    http://www.alxsoft.com/mac/sleepless.html
    http://semaja2.net/insomniaxinfo/
    Blackbook C2D   Mac OS X
    (10.4.10)   120Gig, 1Gig, Superdrive.
    This may be true of overheating, but ONLY in the iBooks and very old laptops, if you think about it what is the difference between native clamshell mode (Using the monitor/keyboard etc) and the hacked clamshell mode? does plugging a screen in to the laptop some how create more ventilation :S
    This rumor is really really wrong, and as stated only affected the old machines which were not capable of native clamshell mode, but of course we keep the warnings there because we dont want to be sued if some idiot places it in there laptop bag while rendering a movie.
    PS. If anyone can give me evidence to prove otherwise i will add it to the investigation that im slowly compiling to "bust" this annoying myth

  • How to keep the Sonogram settings and make them "Sticky"?

    I am a Forensic Audio Examiner and would love to use Soundtrack Pro. Does anyone know how to keep the Sonogram settings and make them "Sticky" so you don't have to reset it every time you open up the project?
    Also the Sonogram loses it's frequency range settings while changing the zoom.
    Where is the feedback link for this application?
    Thanks

    are you talking about the spectrum analysis?

Maybe you are looking for