How to keep the macbook pro at operating temp

What is the normal temperature and how to keep it there

tmorphey,
the normal temperature will vary according to the tasks that your MacBook Pro is executing. In my case, it’s typically in the low 40s °C, though it occasionally reaches triple digits °C (e.g. when it’s busy with source code compilation). Your MacBook Pro’s fan(s) should spin up as needed to keep the interior at an acceptable temperature. Be sure that you use your MacBook Pro in a location that doesn’t have airflow blocked, since that airflow is critical for the fans to do their job properly.

Similar Messages

  • How resilient is the macbook pro unibody from scratches?

    How resilient is the macbook pro unibody from scratches? I get a little OCD about these things lol

    It scratches easily. Handle it with care.

  • HOW TO GET THE MACBOOK PRO 13" TO RUN ON THE 1440x900 RESOLUTION

    Hey guy, this is not a question bu more of an answer. I have read many forums with people wanting to up there res on the macbook pro from 1280x800 to something higher. i got my 13" MAcbook pro mid 2012 to run on the 1440x900 although its blurry and this is how. Firstly you want to download and instal switchresX. open the app go into last option (colour lcd), go to the custom resolution tab, click the + button on the buttom left,  the at the top chage the option to scaled resolution, change the res to horizontal: 1440 and vertical:900. click ok then apply now experimental. reboot your make go into system preferences, display, scaled and select the one you just created. All done . 

    Your best option would be to sell yours and buy a used, unscratched model. A case replacement by apple is going to cost a small fortune.

  • How easily can the MacBook Pro be scratched with another aluminium product?

    I have a MacBook Pro 15' and an iPad 2 with a Smart Cover.  Every now and then, if I carry both in my hands, I stack the iPad on top of the MacBook Pro.  I will hear a sound of metal VS metal and I have figured what it was.  The hinge of the Smart Cover was rubbing against my MBP.  I was wondering, can the 2 scratch each other?  I have noticed wear on the metal Smart Cover hinges, and was wondering if the same thing could happen to my MBP.
    Thanks for helping!

    Aluminum, while flexible and lightweight, is a very soft metal. Apple was very careful with engineering the MBP to round the edges and make the shell as damage proof as possible. Still, with a little bit of hand pressure, you can cut into aluminum with an everyday table knife. That should tell you something.

  • How easy does the MacBook Pro case bend?

    Hello All,
    I've been waiting for the problems with the MacBook Pro to slow down before I purchase one. But, I've recently read numerous stories (on this and other forums) about the case bending in various places.
    From what I have read, it sounds like the aluminum case has weak spots and will bend with little pressure.
    The complaints I have read indicated that the area around the CD-ROM drive may bend slightly where you rest your palms while typing.
    It sounds like the bends are usually minor, but occasionally more severe.
    My question is:
    Is this something that is fairly common?
    Is this just one of the issues that people don't complain about much since it is mostly cosmetic?
    I have never owned one of the Aluminum Mac Portables. So, I can't judge this for myself. And, I'm not particularly sure that the local dealer would let me flex on the computer a bit to see if it would bend.
    The iBook we have is plastic. So, that obviously wouldn't have the same potential.
    I guess I am just asking what everyone's experience is with this. It would be helpful to me to determine whether this is a machine that I should continue considering (once the bugs are worked-out) or if I should stick with a plastic machine like the iBook when the new models come out.
    I imagine that both PowerBook and MacBook Pro owners would be able to comment on the potential for the aluminum case to bend.
    Thank you in advance for your answers and experience.

    So it is very stiff then?
    I guess I got the impression that over time the panel would bend slightly from resting your hands on it.
    I am wanting something that is very durable, and won't become easily damaged when I finally purchase another computer.
    Some people have mentioned that it bent slightly, or that the edges of the CD-ROM drive could make an impression on the case from the weight of your hands resting on the case (or maybe with a little pressure).
    So, I was concerned that this might be something that I should consider when evaluating which machine I should get as my next computer.
    I should add that I do also have a young daughter that will sometime use the computer to play with her programs and such.
    So, structural strength is very important.
    I am generally not concerned with out current machines because the keyboards are very solid (especially with the Mac Mini and iMac G3).
    But, with a machine that has the keyboard and palm-rest built-in, I would be concerned that it might be easily damaged if the material is not strong enough.

  • How long does the macbook pro 13 retina battery last

    I just recently got my macbook and was wondering this because i am a bit scared. Apple says their battery lasts around 9 hours, what does that mean? If just doing simple work like pages and other programs a like, my battery will last up to 9 or 10 hours but that is when my brightness is less than 60%, it lasts maybe 8 hours at full. However, when I'm doing searches on safari like going on websites and youtube, my battery only lasts about 6.5 hours at 40% brightness, for some reason if i am on netflix it will last longer, maybe for about 7.5 hours 40% brightness. I personally would be happy with 6+ hours and keeping it at a low brightness but if I'm supposed to get more battery than why not?! P.S. When i go on activity monitor it says that none of the applications are using more than 5% (except activity monitor).

    Hey samraymond,
    Welcome to the Apple family, I’m glad to hear that you have purchased a new MacBook Pro with Retina Display. Our marketing pages state that the 13-inch MacBook Pro with Retina Display can last up to 9 hours. However, please keep in mind that battery life will definitely vary by use and configuration. Our technical specifications page provides more information on the testing that was conducted to determine battery life:
    Apple - MacBook Pro with Retina display - Technical Specifications
    http://www.apple.com/macbook-pro/specs-retina/
    Testing conducted by Apple in July 2014 using preproduction 2.5GHz quad-core Intel Core i7–based 15-inch MacBook Pro units, preproduction 2.2GHz quad-core Intel Core i7–based 15-inch MacBook Pro units, and preproduction 2.8GHz dual-core Intel Core i5–based 13-inch MacBook Pro units. The wireless web test measures battery life by wirelessly browsing 25 popular websites with display brightness set to 12 clicks from bottom or 75%. The HD movie playback test measures battery life by playing back HD 720p content with display brightness set to 12 clicks from bottom or 75%. The standby test measures battery life by allowing a system, connected to a wireless network and signed in to an iCloud account, to enter standby mode with Safari and Mail applications launched and all system settings left at default. Battery life varies by use and configuration. See www.apple.com/batteries for more information.
    If you’d like to learn more about maximizing your battery life, see this helpful resource:
    Apple - Batteries - Maximizing Performance
    http://www.apple.com/batteries/maximizing-performance/#macbook
    Thanks,
    Matt M.

  • How durable is the macbook pro june 2012

    I am wondering because, well I have a hardbody case on the bottom of my mbp and when i try to take it off i hear a noise and I fear that I may accidently dent or bend the unibody of the macbook so I am wondering how durable this macbook is?

    Pretty durable - I've had MacBook Pros (and, before that, PowerBook G4s) and have never put a dent in the casing nor even scratched it. I don't know what sort of 'noise' you might be hearing when you take the cover off the bottom of your MacBook Pro - maybe it's the plastic on the 'cover'? But I don't think that you need to worry about the bottom casing being damaged if your 'cover' is from a reputable manufacturer such as Speck.
    Good luck,
    Clinton

  • How strong is the Macbook pro 13 hinge?

    I have a 2011 high end macbook pro 13 and when ever I go to use it and look at the hinge, I always have doubts about the hinge. Why such a small peice of plastic as a hinge? I am wondering how much the hinge can take. Is it fragile(you can break the hinge by normal opening and closing) or is it durable (you can open and close it as much as you want and it won't break-of coarse there is a limit). Please give me an idea on how durable it is. I usually try to prevent from opening or closing it normally. I always baby my products and just want to stop my endless worry about the hinge. Please no bad comments. Thanks!

    Strong enough that in normal use it should last 4-8 years without a problem. If you abuse it, Yanking it open and closed repeatedly, it may only last a very short time.
    Why are you bothered by the strength? Is it not working correctly?

  • How good is the MacBook Pro ?

    Dear member:
    I am considering the purchase of a new MacBook Pro to replace my aging notebook. After reading reviews and reports from customers it became apparent to me that many users are experiencing problems with the new Intel technology and the new notebooks.
    1. What problems are all of you experiencing with the new notebooks ?
    2. How does the performance compare with that of the Power PC notebooks ?
    3. How are companies doing in regards to converting their software to run on the new Intel machines ?
    4. Initial reports on Rosetta seem to reveal it is not as fast as Apple initially claimed. How is Rosetta running and what software can't be run with it ?
    What other advice would you have for me ? Should I purchase the new MacBook Pro or wait until all issues have been properly addressed ?
    Thank you in advance for your help and suggestions.
    Best regards,
    Joseph Chamberlain

    1. What problems are all of you experiencing with the new notebooks ?
    I only have two complaints. The first is the display 'buzzing' if it's not turned onto maximum brightness. I run my display at maximum 90% of the time, so it's not that big of an issue. The second complaint is that every once in a while I can hear a slight buzz, which some have attributed to a noisy power supply within the MBP.
    2. How does the performance compare with that of the Power PC notebooks ?
    I used a 15" G4 Powerbook for years, and this is much faster. Like night and day faster. I wouldn't go back.
    3. How are companies doing in regards to converting their software to run on the new Intel machines ? It's hit or miss, but I think Apple has been so quick on getting the machines out (and demand for them has been so high) that some companies are struggling to get their software out as quickly as they'd like. The universal binaries that I've used have been great and fast.
    4. Initial reports on Rosetta seem to reveal it is not as fast as Apple initially claimed. How is Rosetta running and what software can't be run with it ?
    Honestly, I haven't seen this. I have a dual 2.0Ghz, and MS Office runs just fine under rosetta. I don't use any pro apps so I can't speak for those.
    Seriously, just buy it. I love mine. Best laptop I've ever owned.

  • How durable is the MacBook Pro?

    I woke up to a loud bang and somehow my MacBook had fallen off my desk, there Afars to be no major damage, but when I close the laptop it seems to not want to close quite all the way, and it make a slight scraping noise when I open it but other than that it seems ok should I be concerned?

    1. Backup your data.
    2. Take the computer to an Apple store  for a free diagnosis.
    Best.

  • How well does the MacBook Pro 2.0Ghz run games?

    I am quite interetested because from the looks of the specs, it doesn't have the 'muscle' that you would see in a PC. Does it not need the high clocking speeds and memory that a PC needs? I pay quite a few game, mostly FPS and though I have a PC as my main gaming machine, I am wondering if this will be able to play games fluently. Games include (for both PC and Apple) Counter-Strike: Source, America's Army, Battle Field 1942, etc. Sorry if this seems... off.. but I am new to the Apple way.
    -Ryan

    Macs until this January ran on PowerPC CPUs, but the switch is on to bring them all into the "Intel inside" world. Apple realized this transition would be very hard for software vendors who would have to recode their products for the new CPUs so they basically bought a company called Transitive for its translation technology, which Apple calls Rosetta.
    Under Rosetta PowerPC code is translated to Intel code. This means there is considerable overhead on startup and when new code is needed by the application during use, but it's much faster than emulation which is basically a virtual hardware machine made out of software within the OS - pretty technical, and not fast.
    Anyway what you need to know is that PowerPC programs, the vast majority of them, run just fine under Rosetta, but at somewhat of a performance penalty. In something like a text editor this would be almost undetectable, but in a 3D FPS it could really drag down frame rates and overall performance.
    The answer is Universal Binaries: programs that are compiled to run natively on both Intel and PowerPC. More and more are released every day. UT2004 patch 3369-3 (I believe it is) is a good example; it's over 100MBs but contains code for both PowerPC and Intel Macs, making the game "hardware agnostic" and giving you great performance on either CPU.
    Hope this explains it.

  • HT6065 How long is the MacBook Pro upgrade supposed to take, I think something must be wrong... Been installing for 4 hours.:(

    Started the update of software by accident actually, it has been installing for 4 hours, help what do I do?

    I did just power down. Guess I won't upgrade until I hear it works!

  • How Good Can The MacBook Pro Play Minecraft and other games like assassins creed?

    Please Answer!

    You shouldn't have any problem running Minecraft; It's Java based and will run on most platforms. I'm running Minecraft without a hitch.
    Assasins Creed? Hmm, depending on your hardware spec i shouldn't see you having a problem.
    I'm running on the 2013 15" Retina, with dedicated graphics chip though; However the Activity Monitor shows that it is using the Iris chipset to run Minecraft.
    Hope that helps.

  • How do I delete my user ID photo, taken with the camera in the MacBook Pro.  It keeps appearing randomly when I sign in....even after I make changes.

    How do I delete my user ID photo, taken with the camera in the MacBook Pro (when you first buy and set up the computer...).  The photo keeps appearing randomly, even after I've changed it to a "better picture".  I can't get the change to "stick".  Anyone else having trouble with this?  Thanks!

    what OS are you using?

  • How is the best way of keeping your macbook pro battery healthy

    what is the best way of keeping your macbook pro battery healthy there are so many ways what is the best way?

    Read these two Apppe articles:
    http://http://www.apple.com/batteries/notebooks.html
    http://support.apple.com/kb/HT1446
    I generally keep my MBP connected to AC as much as possible and try to make certain that at least monthly I run it on the battery to about the 40% charge level.
    Ciao.

Maybe you are looking for

  • Status list based on status lists.../ Indicator values always 0

    Hi, any help or thoughts would be appreciated. Basically what I'm doing is calculating status list values based on data in excel sheets. This seems to work as expected. I'll call these sub-status lists from now on. The next thing I wanted to do is ha

  • Generic Object Services(GOS)-Link to URL

    Hi, I have a requirement in Generic Object Services.I have to Create External Document(URL) [example:www.sap.com] in <b>background</b> for a FI document(which is viewed in Txn FB03). Any idea to achieve it? Thanks, S.Banukumar

  • Can read TEDS in MAX but not with DAQmx VIs

    Hi, I have a cdaq 9181 with a 9234 accelerometer module.  I have 3 teds equipped accelerometers connected to ai0, ai1, and ai2 repectively.  In MAX, when I reserve the chassis I can read all three teds, no errors.  When I do the same thing in labview

  • Problem displaying memo field

    I have a table in MS access with a memo field. Everything the user inputs in the field is recorded in the table. When I try to output the memo field I am on getting part of the field. Attached is the code for displaying the data from the acty_comment

  • Closed captioning for rtmp streaming video

    hi, is it possible to do closed captioning in  adobe captivate 5.5 if the video is set to rtmp? any reply would be helpful. thanks!