How to keep the photoshop selection to directly use in afx?

I need to draw a line around a form created in photoshop.
How can I keep the selection photoshop and then convert it directly with "draw line effect" on After Effects to save time?
(i speak french so sorry for my english..)

Convert the selection to a layer clipping path in Photoshop, then import the PSD as a comp. The path will automatically be converted to a mask which you can use with teh Stroke effect.
Mylenium

Similar Messages

The popup window won't open at a normal size. Any ideas on how to keep the popup window a normal size when opening?

I recently did the latest update for my MacBook Air and when I use a specific website it won't open the popup blocker at a normal size. Any ideas on how to keep the popup blocker at the size that I select?

This is a user to user forum and Adobe Staff does drop by.
First thing to try is Reset the Type Tool by right-clicking on its' icon in the Options bar.
If you still have problems, it could be related to fonts. Here is a step by step troubleshooting help doc for that.
Troubleshoot fonts | Photoshop CC 2014, CC, CS6, CS5
And basic troubleshooting: Photoshop: Basic Troubleshooting steps to fix most issues
Gene

How to keep the field open for input with error message in report program

Hi,
Need a help in solving the below issue.
"How to keep the field open for input with error message in report program"
Regards,
C.Shasiraj.

Hi...
you have to use the event:
AT SELECTION-SCREEN ON <FIELD> EVENT.
u have to give an error message in this event.
Consider the following Example:
PARAMETERS : NUMBER TYPE I.
AT SELECTION-SCREEN ON NUMBER.
IF NUMBER = 10.
MESSAGE 'Number vakue is 10' TYPE 'E'.
ENDIF.
START-OF-SELECTION.
WRITE NUMBER.

in this if u give the value of number = 10, it will not proceed further, if u give some other value other than 10 you will proceed further...
Execute this program once u will understand....
also Consider the following links :
Regarding events:
http://help.sap.com/saphelp_erp2005vp/helpdata/en/79/34a237d9b511d1950e0000e8353423/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/79/34a23ad9b511d1950e0000e8353423/frameset.htm
Regarding messages:
http://help.sap.com/saphelp_erp2005vp/helpdata/en/c5/aa575426ad11d2954d0000e8353423/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/c5/aa575426ad11d2954d0000e8353423/frameset.htm
This is very useful.......
Reward points if useful....
Suresh....

How to keep the highlight when the JTextComponent lose focus?

I wanted to do some basic copy/cut/paste on the JTextPane from the Menu. But when I selected the menu, the highlight disappeared. How do keep the highlight?
The only topic I found about this was here:
http://forum.java.sun.com/thread.jsp?forum=57&thread=214931
but it appeared intimidating and not exactly what I needed.

Most javax objects will accept things in <html> tags why don't you try setting them onto the JTextPane (never tried this btw but should be worth a try) using html and the transferring the same syntax to the output email

How to avoid the user selecting a different path in my installer

Hello again all you helpful forum-goers!
I have an application and a corresponding installer, and then I have a separate installer putting some support files in the same directory. My problem is that if the user selects a different path to which to install my primary application, the secondary installer will not put the required support files in the same spot.
Now, I think I've figured out how to get the user-selected path from the "Run executable at the end of installation" option in the Advanced pane of the LabVIEW installer configuration, and I can pass that in to my secondary installer, and that should fix the problem. However, what I'd really like to do is just not give the user the option to install my primary application in a different directory to begin with. I've looked, but cannot find any way to do that.
Does anyone know of any way to not present the option to install an application in a different directory when using the LabVIEW installer?
Thanks in advance for any suggestions,
-Joe

Ben64,
That's great! Thank you so much for your quick reply. The only reason I haven't already accepted that as my solution is that it requires a manual post-compile change to a text file. Ideally I'd prefer not to have to remember to do that every time I rebuild my installer. Is there any way that you know of to automate the process?
If not, I'm happy to have a good solution even if it takes an extra step each time to implement.
-Joe

How to keep the WBS & Order in account assignment tab of SD contract item?

Hi Experts,
If I remove the plant from the shipping tab in the contract item (the contract type is WV), I will be able to enter the WBS or Order in accounting assignment tab. However, if I enter the plant (in order to determine the tax in pricing), the WBS and Order are disappered and there is one new settlement rule button showed up.
Do you know any configuration could keep the WBS and order in the accounting assigment tab even the plant is there.
Thanks in advance!
Norman

Hi Chandra,
Thanks for your answer. However, I even added the plant in the WBS, the tax (we use tax jurisdiction) still could not be determined.
The problem is that SAP changes the account assignment tab screen (it suppresses the WBS and Order fields, but addes settlement rule) with the plant in the shipping tab. Do you know how to keep the same account assignment tab screen with the plant in the shipping tab?
Thanks,
Norman

How to get the previoulsy selected value in a combobox

How to get the previoulsy selected value in a combobox. i WANT the current and the previously selected value of the combobox.

Just add to combobox ItemListener. When item is changing in itemStateChanged arrives 2 events. ItemEvent.DESELECTED and ItemEvent.SELECTED with corresponding item's values. Just write something like this:
        comboBox.addItemListener(new ItemListener() {
            Object prevValue;
            public void itemStateChanged(ItemEvent e) {
                if (e.getStateChange() == ItemEvent.SELECTED) {
                    //do what you need with prevValue here
                } else {
                    prevValue = e.getItem();
        });

How to get the old selection in ListSelectionListener valueChanged() method

Hi,
Is anyone know how to get the old selection index/value in the ListSelectionListener valueChanged() method? The list.selectedValue() always return the same value which is the new selection. The ListSelectionEvent.getFirstIndex() and getLastIndex are always firstIndex <= lastIndex so that you cant' tell which one is the old selection.
Please help and thanks!

Just test the two indexes (first and last): if the corresponding row is selected, then the other is unselected. That gives you the old (unselected) and new (selected) item.
Of course, I have supposed that you were using a SINGLE_SELECTION model...
Hope this helped,
Regards.

How to set the default selection to "Select All" in a Multi valued parameter in SSRS 2008?

Hello Everyone,
How to set the default selection to "Select All" in a Multi valued parameter in SSRS 2008?
Regards
Gautam S
Regards

You need to specify "Default Values" in the report parameter property. Choose similar option used in the "Available Values" option, this will allow the parameter to check "Select All".
Regards, RSingh

How to keep the data entered on a page apex

how to keep the data entered on a page apex
so, I've got a registration page then wish go to another page P2 and I return to this P1 without losing data

Hi,
As long as the registration page is within the same session, the values will remain in the session until they are specifically cleared out. This can be done by a process on a page - so check if you have a "reset page" process on P1 and, if you do, delete it. This can also be done on a branch - so check the branch that takes you to P2 and see if there is anything entered in the Clear Cache setting and, if it shows *1*, remove that. There are other ways as well, but these are most typical.
Andy

How to read the Lead Selection in Search UIBB

Hello,
I have a Search UIBB implementation with the list from Search UIBB.
When the user double click any line in the List we want to call another program. Not sure how to read the Lead selection. I see the event ID FPM_RESULT_LEAD_SEL in Process_Event method and GET_DATA method but not sure how to get the actual line.
Thanks in advance for any help.
Regards,
PK

Hi ,
method IF_FPM_GUIBB_SEARCH~PROCESS_EVENT.
CASE IO_EVENT->MV_EVENT_ID.
WHEN IF_FPM_GUIBB_SEARCH=>FPM_RESULT_LEAD_SEL.
READ TABLE IT_RESULT_LIST into IS_RESULT_LIST index IV_LEAD_INDEX.
ENDCASE.
Where IT_RESULT_LIST -> is the internal table of ET_RESULT_LIST( This can be declared in attributes section and assigned value in GET_DATA method )
IS_RESULT_LIST-> is a structure of type table IT_RESULT_LIST.
IV_LEAD_INDEX has to be created at attributes section and the value of the selected row of type I can be assigned in IF_FPM_GUIBB_SEARCH~FLUSH method for the same event.
Regards,
Harsha

How to keep the filtered output in a page after user navigates back?

How to keep the filtered output in a page after user navigates back to all records from another page.
Currently it clears the search

Hi,
user13091824 wrote:
How to keep the filtered output in a page after user navigates back to all records from another page.
Currently it clears the search---While returing from page AM Return status should be True in pageContext.setForwardURL.:::
pageContext.setForwardURL("OA.jsp?page=/XXX/oracle/apps/po/msg/webui/SearchPG",
"SUPP_SEARCH",
OAWebBeanConstants.GUESS_MENU_CONTEXT,
null,
null,
true, // Retain AM
OAWebBeanConstants.ADD_BREAD_CRUMB_NO,
OAWebBeanConstants.IGNORE_MESSAGES);
---After setting AM Status to true u can able to c the values.
Regards
Meher Irk

How to get the default selection color from JTable

Hi, there,
I have a question for how to get the default selection color from JTable. I am currently implementing the customized table cell renderer, but I do want to set the selection color in the table exactly the same of default table cell renderer. The JTable.getSelectionBackgroup() did not works for me, it returned dark blue which made the text in the table unreadable. Anyone know how to get the window's default selection color?
Thanks,
-Jenny

The windows default selection color is dark blue. Try selecting any text on this page. The difference is that the text gets changed to a white font so you can actually see the text.
If you don't like the default colors that Java uses then use the UIManager to change the defaults. The following program shows all the properties controlled by the UIManager:
http://www.discoverteenergy.com/files/ShowUIDefaults.java
Any of the properties can be changed for the entire application by using:
UIManager.put( "propertyName", value );

How to Disable the Lead selection Action on aTable n How to Refreh a Page

HI....
1)How to Disable the Lead selection Action on aTable n How to Refreh a Page r web dynpro application.
In my case i have a table n user enters data on multiple rows in table , n i have some input fields outside of table for those Inputs fields am settiing the data at the screen initilization(in Init() moethod by hard code).the problem is whenever the is clicking in th 2nd row of a table the Lead Selection is triggerig and the data in the Input Fields outside the table is not displayinig.
So by removing the lead Selection Action of a table i thought i can reslove this,
2) How to refresha page(like we click F5 on key board),is it can be done thru code in web dynpro application
Regards
Rajesh

Hi,
You did not explained what is your functionality or coding in leadselection. Is that action on leadselection is necessary for you?.
1)If you just want to remove the action then go to table properties and remove the action for leadselection.
2)If you still want to continue with your leadselect action, then what you can do is.. write the code in leadselection action to again set the input fields which are out from table. That is what you did in your init method.
Page Refreshing
3) What do you mean by page refreshing? is that refreshing your table only or both the table and input fields.
What I understood is you are allowing the user to enter values in table and soon after pressing a button the values should be saved and the data in input fields shld be deleted. For this if you only invalidate the node then the user entered data will be lost.
So what you do is after getting the input data from the user add it to a ArrayList and then invalidate the node which clears the data in input field. Finally bind the Arraylist to your node. see the following code. This is a concept make changes according to your requirement
ArrayList list1=new ArrayList();
wdContext.nodeAbc().bind(list1);
IPrivateExcelviw.IAbcElement ele = wdContext.createAbcElement();
ele.setNo(wdContext.currentAbcElement().getNo());
ele.setName(wdContext.currentAbcElement().getName());
ele.setMarks(wdContext.currentAbcElement().getMarks());
list1.add(ele);
wdContext.nodeAbc().invalidate();
wdContext.nodeAbc().bind(list1);
Revert me if you have any doubts
Regards
Raghu
Edited by: Raghunandan Madarikuruva on Oct 16, 2008 8:07 AM

HT202213 how to keep the songs on your iphone

i have itunes home sharing i would like to know how to keep the songs on your iphone after you turn home sharing off or get out of range.

You sync them via iTunes.
You canot copy them to the iPhone using Home Sharing.

How to keep the photoshop selection to directly use in afx?

Similar Messages

Maybe you are looking for