How to keep the Sonogram settings and make them "Sticky"?

I am a Forensic Audio Examiner and would love to use Soundtrack Pro. Does anyone know how to keep the Sonogram settings and make them "Sticky" so you don't have to reset it every time you open up the project?
Also the Sonogram loses it's frequency range settings while changing the zoom.
Where is the feedback link for this application?
Thanks

are you talking about the spectrum analysis?

Similar Messages

  • Does Anybody know how to keep the license files and Certificates in ISE-3315 During the upgrade.

    Hi,
    I have two ISE-3315 Appliances in production network.
    I need someone's help to explain, how to make the Secondary node as the primary admin note to reset-config.
    And then I would like to know how to keep the license files and Certificate during the Upgrade.
    Please help me to answer my questions.
    Thanks
    CSCO11872447

    The Cisco Identity Services Engine (ISE) provides distributed  deployment of runtime services with centralized configuration and  management. Multiple nodes can be deployed together in a distributed  fashion to support failover.
    If you register a  secondary Monitoring ISE node, it is recommended that you first back up  the primary Monitoring ISE node and then restore the data to the new  secondary Monitoring ISE node. This ensures that the history of the  primary Monitoring ISE node is in sync with the new secondary node as  new changes are replicated.
    Please  Check the below configuration guide for Secondary ISE- Nodes.
    http://www.cisco.com/en/US/docs/security/ise/1.0/user_guide/ise10_dis_deploy.pdf

  • Why are my Illustrator images getting thicker strokes when I take the bounding box and make them smaller?

    Why are my Illustrator images getting thicker strokes when I take the bounding box and make them smaller? This has never happened to me. I'm not an expert at Illustrator, but I do know some fundamentals.

    Thank you for responding so quickly. No apologies necessary - I know this Forum isn't McDonalds - don't expect an answer to be served up right away. You helped me out with a big issue yesterday.
    I am using a mac - OSX 10.7.5
    I have Adobe Creative Suites - CS5 - Illustrator version is 15.0.2
    The contents I am placing are all  Vector - Illustrator files
    But, I wonder about some of the vector files I work with.  Could a "line weight/thickness" be 'assigned' to the drawing and screw things up? I used 'simple' linear (line) drawings from SolidWorks that have been converted to ai files. It's just weird because I checked the stroke of the drawing and it's not out of line.
    I am attaching part of some box labels. You can see how the drawings, of the products, on the 'left side' are "thick" after embedding them. I think the "Global Logo" was pasted into a template not linked that's why it's okay. But look at the Quiet Thunder logo - it looks terrible. These labels are only 2.25" X 6.5", so its important I keep the images lightweight. 
    Your help is very much appreciated. Thank you!

  • How to create the custom method and make it available to clients:

    Hello, Can any one help me with this problem ASAP??
    I am trying to work on an example of "Customizing the Query and Creating an Associated Custom Method"
    from http://helponline.oracle.com/jdeveloper/help/topics/jdeveloper/developing_mvc_applications/adf_pviewcustommethod.html?tp=true#method. To do that, the first task is to create the custom method and make it available to clients.
    Following instructions in the helponline documentation, I completed the three steps: (1) "Specify a custom query for the View Object definition for EmployeesView", (2) "Add the custom method to the application module Java class", and (3) "Make the method available to clients".
    The following is the error message I got to test the application module. Can anyone tell me what the message really means and what I should do. I am wondering if there is any mistakes in the document.
    (oracle.jbo.SQLStmtException) JBO-27122: SQL error during statement preparation. Statement: SELECT Employees.EMPLOYEE_ID, Employees.FIRST_NAME, Employees.LAST_NAME, Employees.EMAIL, Employees.PHONE_NUMBER, Employees.HIRE_DATE, Employees.JOB_ID, Employees.SALARY, Employees.COMMISSION_PCT, Employees.MANAGER_ID, Employees.DEPARTMENT_ID FROM EMPLOYEES Employees WHERE Employees.SALARY > :1 and Employees.DEPARTMENT_ID = :2
    ----- LEVEL 1: DETAIL 0 -----
    (java.sql.SQLException) ORA-01008: not all variables bound

    You need to set values for the parameters in your query before you try to execute the query in the view object.
    So you need to call the setBindVars method before the query.

  • How do I change my security settings and make them STAY changed?

    I have set my settings in Tools - Options - Privacy - Never remember history - about a thousand times now, but it never STAYS set to that. It keeps reverting back to Use custom settings for history instead, which is annoying in the extreme and is ultimately a security risk.
    This has only happened since I upgraded to Firefox 4.0.1 - it was set on Never remember history in the previous version and remained on that beautifully. How do I get this newer version to retain what I set it at please???? It's driving me mental!!!!

    Only if all settings are the default then you will see "Firefox will: (Never) Remember History".<br />
    The "Use custom settings for history" choice reverts to "(Never) Remember history" if all History and Cookies settings are the default.<br />
    If you see "Use custom settings for history" then at least one of the History / Cookie settings is not the default.
    If you select "Never Remember history" then you enter Private Browsing mode and "Permanent Private Browsing mode" will be selected.

  • How to keep the repeating table and all of its contents on the same page

    Hi All,
    I use 5.6 build version of xml publisher. My problem is about, repeating table in rtf is divided, so i want to keep the object and its contents on the same logical page.
    How it can be done?
    Thanks.

    I'm glad to hear someone who doesn't have this problem. I tried that to make a connection between my phone and PC, but then I am unable to accomplish that: it says (on my phone) how I'm not playing something... :@ I mean "WTF, it is a bluetooth...".
    I did disable the software from starting, but I is not all of the software - it is all around me: in main many, in control panel... And I can smell some other processes running!
    Also, the computer continues to restart it self for no reason, and it has to do something with installation of Toshiba BT...
    I will remove this thing from my PC even if that meant reinstalling operating system!
    No, I don't have Toshiba notebook... Maybe I had, if that was one part of the uninstalled components.
    I don't get it, it looks like Toshibas developers wanted to scr*w with us - why did they make it so hard to remove all of those components. The internet is full of peoples post who had the same problem as I do!

  • How to organize apps into folders and make them stick in iphone 3gs?

    Four hours down the drain! Darn, I decided to finally learn how to organize my apps into folders and do it right. Instead I spent four hours and must have got it wrong.
    I opened iTunes on my MacBook with my iPhone attached. Then clicked on the iPhone in the left side list of my iTunes. Then clicked on apps which brought up a nice page with all my iPhone apps listed in one window on the left and all the pages of the apps that are on my iPhone in the window on the right. So far this is what I think the User Manual and Help said to do.
    At that point I created new folders by dragging one app over another. For example, I would find a photography app and drag it onto another photography app. That automatically created a folder with the name photography. Just what I wanted. I then looked for more photography apps and dragged them to the folder.
    This is not too easy because I had eight pages of apps. At first, I would grab an app on a page and drag it to where I knew the corresponding folder would be and put it into the folder.
    Later I found another way was to use the list of my apps on the right to put them in apps.
    In the end, from what appeared on the screen, it seemed to me that most of my apps were in folders and the folders were either on page one, two, or three. At that point I thought that I should sync the MacBook with the iPhone, I believe, and did so.
    When the sync was finished I took the iPhone off the computer and looked at it. NONE of the folders I created, nor the organization into folders of the apps were on my iPhone!
    Obviously, I did something wrong since the same mess was on the iPhone as before, with apps all over the place and impossible to locate without taking too much time. This after four hours of work looking at a 13 in. laptop screen!
    What I hope is that someone smarter than me will look at what I did and tell me where I went wrong.
    I want the apps on the iPhone to be organized into logical folders so it is easier to find them. Something along the lines of a good database, you know?
    Thank you for reading to the end of this question,

    OK, I spent another afternoon doing the job started yesterday. Last night (could not sleep, so might as well think) I got to thinking that I really must have missed a step or something because all my work was done on the Mac and I did not recall any time when I transferred the new setup with folders to the iPhone.
    Sure enough, when I tried it today I did find that missing step. When looking at the Home Page of the iPhone or any page being worked on, in the lower right hand corner two buttons say
    SYNC APPLY
    I do not recall using the APPLY button on the first day trying this, but I used it this time.
    After making changes, I hit APPLY and the computer began to sync with the iPhone.
    This time, although there is nothing telling the user what is going on, the sync actually makes the iPhone pages to look exactly like the pages created on the Mac.
    Too bad the instructions and help did not say to do things in this way, which is the only correct way, as far as I can tell.
    I have about 155 apps on the iPhone, making the job extra lengthy. However, I never could do it on the iPhone’s tiny screen, even though it is possible, so this was good - working on the larger screen of the MacBook.
    There are also some (undocumented?) tricks in using the MacBook for this task. For example, it is possible to create a folder and then, using the list of all apps on the iPhone that is on the left side of screen, open the folder, click on the check box next to any app you want to put in the folder and it will jump right in!
    If the check box already has a check mark, just click the box to remove it, click again to put the check mark in the box and voila the app takes off for the folder. This also works to just put apps onto a certain page, if you want to do that, but dragging apps around sometimes works better.
    I hope it will not be necessary to do this again because of the time involved, and he need for quite a bit of thinking on how to move the apps and folders around to get everything just where you want it on the iPhone. The work reminded me of an old kids game that has a small square case with, I guess eleven movable numbers, that are all mixed up, and one space that is not filled with a number. You can move the little squares with the numbers around inside the case to try to line the numbers up in order from 1-11 and do it faster than anybody else.
    Well, unfortunately lining up all my apps was like that because each page of the iPhone only holds 16 folders or apps and each folder is limited to 12 apps. Starting with 155 apps it takes too much mouse maneuvering to make the process easy.
    Finally, the automatic folder names are very broad, as in MUSIC, LIFESTYLE, SPORTS and such, so I often just deleted the given categories and put my in my own. Also, some day I may break down the folders more because twelve apps in one folder means the apps are still pretty much out of view.
    I wrote this in case anyone else finds it and has the same irksome product. If I just reinvented the wheel, please do not tell me now.

  • How to determine the system color and set them for my app?

    Hi,
    I'd like to set the colors of my application to the system's colors. Especially the backgrounds of my JPanels, JButtons and so on should look like in the operating system. If you change the systems color scheme, my application looks really wierd with it's grey canvas an components and the border and menu of the window is displayed in the system's colors.
    any idea??
    koem

    The UIManager only seems to have control over
    awt-controls. All swing controls are not listed, when
    you try this:
            UIDefaults defaults =
    UIManager.getLookAndFeelDefaults();
    for(Iterator i = defaults.keySet().iterator();
    ator(); i.hasNext();)
    String name = (String)i.next();
    System.out.println(name);
    }It would be nice to have it set globally somewhere in
    the program.
    koemActually, the truth is quite the opposite, the UIManager only has control over swing components.
    There are many ways you can set these globally. You can sublcass your own look and feel, use the system look and feel, call UIDefaults.put() etc.
    Graeme

  • How to keep the page-setting and the extension of a file uploaded to a form

    Hi,
    I created a form based on table witch contain a blob.
    If i upload into it an HTML file, when i load it in a report it look fine. But, if i upload a MSword or PDF file
    it display binary characters.
    Please help.
    Thanks.

    Hi Scafandri ,
      LEAD SELECTION IS A PROPERTY OF A NODE.  YOU CAN CHECK AND UNCHECK THAT PROPERTY UNDER NODE PROPERTIES.
    OR IF YOU WANT TO SET SELECTED ROW AS LEAD SELECTION THEN USE THE BELOW LINK IT WOULD BE HELPFUL
    retreiving the selected row index value
    In onclick  event of alv table,
    first get the index value of selected row  using r_param->get_index( ).
    Then using this value  set lead selection  like below
    lo_nd_itab->set_lead_selection_by_index ( above index value ).
    Then selected row will become the leadselection.
    Regards
    Srinivas

  • MultiTrack: How to copy mute and effects settings and shift them forward an exact amount

    I have mute and effects settings I need to shift forward.
    Let's deal with mute on and off automations settings first: I recorded mute automation for instruments on multiple tracks. I need to keep the exact mute on/off settings for the second verse, so I need to shift them forward and start them at the beggining of a specific bar (the vocals have no settings that need shifting).
    I need to copy the mute settings and apply them again at a certainbar of music.  Is this possible?
    I need to keep the original settings at the beginning of the track in place as well, so I can't grab and drag them unless it creates a copy and leaves the original mute settings in place.
    Thank you greatly, I'm working multiple projects trying to get to them all in time.

    Hello Crispin,
    I'm definitely with you on the pain of making multiple tweaks just to make everything look the same. We do not currently have a way of copying properties, but if you have an idea for how you'd think it might work, we'd love to hear from you at:
    http://ideas.adobe.com/ct/s.bix?c=DA4859AD-8934-4F93-983A-4219E2DD9275
    where we are collecting ideas for future directions for Catalyst.
    For now, I would suggest trying to factor similar portions into components as much as possible. For example, perhaps you could create an empty button with all of the effects you want (like the glow, sizing, etc), and then just create a component where that button is above the text and image for a specific button. That way, when you change the appearance of your single button component definition, the appearance will change for all of your buttons. If you got really carried away, you could even create a custom component where each of the states is a different image / text pair, and just set the state of that component for each instance on the artboard.
    -Bear

  • Would like to know how to take itunes and make them caller tunes on iphone

    would like to know how to take itunes on iphone and make them caller tones

    Then type "create iphone ringtones"  or similar into the google search bar.
    You will find several ways to it.
    If you have a Mac as your signature says, then you have posted in the wrong forum - this is the windows forum - and you can use Garageband to make ringtones.

  • I have just required a second hand mac and when I try to download a song or import a cd to iTunes an error notice says that I am not priveledged to make changes? The preference settings and apple I'd seem to be ok. How do I fix this?

    I have just required a second hand mac and when I try to download a song or import a cd to iTunes an error notice says that I am not priveledged to make changes? The preference settings and apple I'd seem to be ok. How do I fix this?

    Greetings,
    I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
    At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
    The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
    I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
    You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
    Good Luck - Cheers,
    M.

  • How do you Customize the weather on the home page and make it default to that setting? I have Customize several times and it keeps changing back to McLean, VA in English

    How do you Customize the weather on the home page and make it default to that setting? I have Customize several times and it keeps changing back to McLean, VA in English.
    [email protected]

    '''''What''''' webpage do you have set as your homepage? <br />
    Are you saving cookies for that page?

  • I'm going to be using a borrowed computer, so don't want to make permanent changes to that FF. Is there a way to sync the FF settings and keep them on a thumb drive for temporary use?

    Is there a way to sync the FF settings and keep them on a thumb drive for temporary use? I know you can try to copy the "default" folder in .mozilla, but that usually ends up a mess. The home computer runs on Linux, don't know what the borrowed one will be.

    There's Portable Firefox for Windows - http://portableapps.com/apps/internet/firefox_portable - and another for Macs - http://www.freesmug.org/portableapps/firefox/ - not for Linux, AFAIK.
    Firefox Sync works thru a server, either Mozilla's sync server or a local sync server the user has running on their own LAN. There's no way to sync the data to a thumb drive unless it has a version of Firefox on that thumb drive.
    You didn't mention which "settings" are involved, but you can export your Firefox bookmarks in HTML format to a thumb drive, and view that bookmarks.html file on any web browser on just about any operating system.
    Bookmarks > Show All Bookmarks ''(or Organize Bookmarks for 3.6 and earlier versions)''-> Import & Backup - Export HTML...
    For your other personal data in Firefox, there is no real solution outside of using Firefox.

  • How can i keep the optimize settings in Muse

    Hello
    I just uploaded a web site www.coopdebici.com
    I was very carefully optimizing the images in adobe photoshop, and make them always at 100%.
    When the web site was oline i takes a lot to charge some images and i just realized that Muse increase a lot the file size of most of them!
    So, how can i keep the original optimize settings?
    I don't want to replace the images manually using ftp
    Help me please
    Sebastián

    I just realized what happens.
    I see that some images keep the original names an its compression and size, but other images doesn't.
    The "problem" is with the round corners that i used, the original images are in jpg, but in order to make the round corner the Muse convert them in to png and it increases a lot the file size.
    This can be helpful for you

Maybe you are looking for