How to keep track of count from repeating table - INFOPATH 2007

Hello,
I have a repeating table with two columns: Title (dropdownlist 'A') and
Count (integer). Let's assume the user picks Title1
with count of 3 and next row, Title2 with count
2. Now, I have a repeating section which contains a dropdownlist
'B' that uses 'A' as a datasource.  I need to develop a fucntionality to put some validation on dropdownlist
B, where you should throw error if user inserts more than 3 repeating sections that has
Title1 and no more than 2 repeating sections where dropdownlist
B has Title2.
Please assist.
Thanks
smith

Hi,
To get the count of the repeating tables dynamically with custom logic, custom code behind the InfoPath form will be required.
The link below will show how to count the total amount of sections in a Repeating Section in InfoPath on the change event of the repeating section, you can apply extra custom
logic to it to meet your requirement:
http://www.bizsupportonline.net/infopath2007/programmatically-count-total-amount-repeating-sections-infopath.htm
Another two links about how to work with InfoPath form programmatically for your reference:
http://msdn.microsoft.com/en-us/library/bb509311(v=office.12).aspx
http://blogs.msdn.com/b/infopath/archive/2010/03/18/introduction-to-programming-in-infopath-2010.aspx
Best regards,
Patrick
Patrick Liang
TechNet Community Support

Similar Messages

  • How to keep track of how many times a link has been clicked?

    How to keep track of how many times a link has been clicked or accessed? Do I need to use database for this?

    Hi
    Proably something like this can work,
    1> Have a servlet/bean invoked when the link is linked
    2> have a static variable in that servlet/bean wich gets incremented before the control is passed to another desired page..
    The problem with this approach is that care has to be taken that the servlet/bean is not re-instalised, in case of which the static variable will also be instalised and the data would be lost.
    The best thing is to store the count in the database.
    Regards
    Arathi.

  • How to keep track of emails btn Blackberry & Outlook???

    Hi,
    I'm considering buying a Blackberry Curve (Sprint).  My hangup thus far is that I want to have all of my sent emails in my Outlook on my home computer.  My solution thus far has been to use GoToMyPC so that I can connect to my home PC from any computer and take care of my emails.  Also, I work mostly from home, so this isn't a huge problem in terms of convenience and efficiency. 
    Most people tell me that they CC themselves when they send an important email from their Blackberry.  This is how they keep track of important emails sent from their Blackberry.  IS THERE ANOTHER WAY?  A MORE RELIABLE WAY?  IS THERE A WAY TO HAVE ALL EMAILS SYNC'D WITH OUTLOOK WHEN (THEORETICALLY) SYNCING MY BLACKBERRY WITH MY HOME COMPUTER?  IF NOT, WHAT IS THE BEST WAY?
    Thanks in advance,
    Gary 
    Solved!
    Go to Solution.

    I have two (2) EMails addresses; on is my blackberry address, and the other is my Outlook.  I mostly give out my Outlook address so I could have it on my PC at home, and when Isync it is there,. Or, in the field if I inadvertantly delete a message, I know it will still  be on my PC at Home. I think your friend is correct. If she has the Blackberry
    Enterprise System through her IT Dept. at work. I have the BIS (Blackberry Internet Service).
    I hope this helps. It is quite confusing
    Writer~
    Thanks,
    Writer~

  • How to keep track of last song played?

    Hi!
    Does anyone know how to keep track of which song played last time before itunes was closed? I have a big list of songs in my playlist and I play it everyday while I'm working. If I shut down my computer and start it again the next day, I have to manually look for the song I played the previous evening. Is there a way where it will keep track of the last song and play it from that?
    Thanks
    JB

    Subwaygirl, welcome to the Mac family! I'm not sure whether you're asking about beginning to play from the last song played on your iPod or iTunes so I'll answer both.
    From the iPod, simply hit Play and it will begin at the next song. It cannot go back to the last song played.
    From iTunes, use my answer to Chris to add the Last Played column, sort by that and select the song at the top of the list. That is your most recently played song. If you hit the >> or Next button you will then go to the next song in the randomly-sorted list.
    Powerbook G3 Mac OS X (10.3.9)

  • How to keep track of the users who are all currently logged in

    Hi All,
    I have basic knowledge of Session and Servlets. I am wondering how to keep track of the users who are all currently logged in. There should be some way of achieving it.
    I thought of it and come up with having an Application variable that hold it when ever a user successfully logged in.
    Thanks in advance for any reply.

    You can do this by keeping data in a static veriable in a some class of yours. The variable will need to be a collection.
    Whenever a user loogs in to the site a servlet/jsp should put the users information in to the collection and when logs off or when the session expires the entry should be take off.
    You can achive this by storing the velues in a some sort of a week collection where the entries are automaticaly removed when all the other refferences to the entry goes out of scope.
    You might need to read bit about java.lang.ref package and WeekReference
    Or you can make the entry in the collection contain the last time that the user visited any of the pages and a thread can run time to time and clean up the older entries which have timed out

  • How to keep track of the changes done in ALV GRID Report

    Hi Experts,
    how to keep track of the changed record in ALV GRID Report. how to set the field to be editable even for the entire row also. Can anybody guide along with code also?...
    Valuable answers will be rewarded.
    Thanks,
    Satish.

    Hi,
    Access the table through SM30. It comes blank as standard. Click "New Entries" and make entries for changes to be tracked. For example, whenever an org. unit changes 002 and 003 relationship, you will make entries like:
    01 O 1001 B002 Activate box checked
    01 O 1001 B003 Activate box checked
    Here, 01 is your active plan version, O is org. unit, 1001 is infotype and B002 and B003 are the subtypes. You can also use * for infotype and subtype which means every change will be logged.
    If you then run the report RHCDOC_DISPLAY through SA38, it will pick up all the changes pertaining to B002 and B003 relationship for org. units (in the above example).
    Similarly, you can set up this table for other object types.
    For more information, follow SPRO>Personnel Management>OM>Basic Settings>Activate change documents and go through the documentation for that node. Also, read up the documentation for the report.
    Hope this helps.
    Donnie

  • How to keep Track of the wagetype Changes

    Hi Experts,
    How to keep Track of the Changes after changing the wagetype values.If any body has made changes to the existing wagetype, how do we keep a track of what changes has done, is there any standard Tcode through  which we can get the information.
    Thanks in advance,
    Regards,
    Magesh.S

    Hi,
    Access the table through SM30. It comes blank as standard. Click "New Entries" and make entries for changes to be tracked. For example, whenever an org. unit changes 002 and 003 relationship, you will make entries like:
    01 O 1001 B002 Activate box checked
    01 O 1001 B003 Activate box checked
    Here, 01 is your active plan version, O is org. unit, 1001 is infotype and B002 and B003 are the subtypes. You can also use * for infotype and subtype which means every change will be logged.
    If you then run the report RHCDOC_DISPLAY through SA38, it will pick up all the changes pertaining to B002 and B003 relationship for org. units (in the above example).
    Similarly, you can set up this table for other object types.
    For more information, follow SPRO>Personnel Management>OM>Basic Settings>Activate change documents and go through the documentation for that node. Also, read up the documentation for the report.
    Hope this helps.
    Donnie

  • How to keep track of changes made for a particular Inq Doc number.

    hi all,
    my senario is as follows :
    the requirement is to send mail every time we take print for a sapscript for inquiry ..however the header and the body of the mail will change depending whether the user created a new inquiry doc or changes an existing doc. how to keep track of the changes.
    please give me some suggestion.
    thanks in advance
    Srinivas

    its time cosuming process :
    check table CDHRD/CDPOS tables to keep track of changes.
    Regards
    Prabhu

  • How to keep track of the sequence of the BSP Pages being invoked.

    Hi,
    How to keep track of the sequence of the BSP Pages being invoked.
    I have a BSP Page A.htm. There are two other pages B.HTM and C.HTM in the same BSP Application.
    The page B.HTM has a link A.HTM. The page C.HTM also has a link A.HTM. On clicking  these links the Page A.HTM would be invoked. Is there any way to keep track which BSP Page  (i.e B.HTM or C.HTM) invoked the page A.HTM.
    Any input on this Regard would be of great help.
    Thanks and Regards,
    Pavithra

    Hi Pavithra,
    Declare in page attributes:
    appl_url type string
    In the onClick event of the link that calls the A.htm page , use:
    call method runtime->get_url
    receiving
    URL = appl_url.
    Now appl_url contains the url (also name) of the page that invoked A.htm .
    Hope it helps.
    Anubhav.

  • How to keep track of what I've previously draw

    They said:
    Everytime the paint method is called, everything that was drawn before must be redrawn. The paint method has no way to keep track of what you've previously drawn, it is your responsibility as the programmer to keep track of such things.
    Is this right?
    How can keep track of my random shades of random amounts?
    Is there a simple way to do that?
    In a example, I must use getGraphics to get JPanel's graphics, then I use it to random draw something in the JPanel.
    I just want to keep them in my JPanel when it resizes.I haven't get the answer yet.
    Can you help me?

    Ok I haven't got time to write the code for you, but here's the idea:
    //User drags mouse around to draw on screen
    //use mouseActionListener to catch MouseDragged event
    int x = mouseEvent.getX();
    int y = mouseEvent.getY();
    Point p = new Point(x,y);
    arrayListOfPoints.add(p);
    // end mouse action capture
    //override paint method of component
    public void paint(Graphics g){
        super(g);
        Iterator it = arrayListOfPoints.iterator();
        while(it.hasNext()){
            Point p = (Point)it.next();
            g.drawLine(p.getX(),p.getY(),p.getX(),p.getY())   

  • How to stop Adobe Flash plugin from repeatedly crashing Firefox?

    How to stop Adobe Flash plugin from repeatedly crashing Firefox?

    yeah, having the same problem.
    Hulu is working on my internet explorer 8, tho... Interesting thing is that it detected I didn't have the 10.1 version of adobe flash player even though I just downloaded that on firefox. So MAYBE the problem is between firefox and adobe. Just a guess

  • Collumn Count from Database Table

    Hello,
    I wan't to get a Collumn Count from a Table in my Database, but I don't know how to do that.
    I use a ResultSet, and if i press ctrl + spacebar in NetBeans I get a list of all kind of things I can get out of the result set but I can't find CollumnCount anywhere.
    I thought I could use a try catch statement like this:
    try
    for(i=1; i<999; i++)
    myResultSet().getString(i);
    catch( Exception e )
    AantalKolommen = i--;
    But everytime I get an Exception over Invalid Crursor State and "i" keeps standing on 1.
    Does anybody know a way to find out how to get a collumns count????

    To retrieve the columns for a table use
    http://java.sun.com/j2se/1.4.2/docs/api/java/sql/DatabaseMetaData.html#getColumns(java.lang.String,%20java.lang.String,%20java.lang.String,%20java.lang.String)
    To get the columns for your result set use
    http://java.sun.com/j2se/1.4.2/docs/api/java/sql/ResultSetMetaData.html#getColumnCount()
    To get the ResultSetMetaData use
    http://java.sun.com/j2se/1.4.2/docs/api/java/sql/ResultSet.html#getMetaData()

  • How to delete the duplicate data  from PSA Table

    Dear All,
    How to delete the duplicate data  from PSA Table, I have the purchase cube and I am getting the data from Item data source.
    In PSA table, I found the some cancellation records for that particular records quantity  would be negative for the same record value would be positive.
    Due to this reason the quantity is updated to target but the values would summarized and got  the summarized value  of all normal and cancellation .
    Please let me know the solution how to delete the data while updating to the target.
    Thanks
    Regards,
    Sai

    Hi,
    in deleting the records in PSA table difficult and how many you will the delete.
    you can achieve the different ways.
    1. creating the DSO maintain the some key fields it will overwrite the based on key fields.
    2. you can write the ABAP logic deleting the duplicate records at info package level check with the your ABAPer.
    3.you can restrict the cancellation records at query level.
    Thanks,
    Phani.

  • How can i convert the data from mutiple-table to the other database(MSSQL)?

    Dears,
    How can i convert the data from mutiple-table to the other database such as MS-SQL?
    I have a third party system based on MS-SQL 2000.
    Now we want to make a integration between SAP R/3(Oracle) and SQL server.
    When my user releases the purchase order in R/3, the application we coded will convert the releated data to the temp database on the SQL server.
    But i don't know which tools will help me reach the purpose.  BAPI, LSMW, IDoc... ???
    Would anybody tell me which way is better and how to do?
    Thanks a lot!
    Kevin Wang

    Hello Kevin,
    The question to use which method depend on your detail requirements. If you use BAPI, you need to find which Bapi can provide the data you want. Bapi normally use as a function called by external system. So you need to develop an external program like VB/Java to call this Bapi and move it to SQL. LSMW is use when you want to upload data from an external system to SAP. So it does not serve your requirement. Idoc can be use to export data to an external system. Again like Bapi, you need to find what Idoc can provide the data you want. However, it does not any programming from the external system. If I were you, based on your requirements, I think writing an Abap program that read the data you want and download it to NT/SQL server will be faster and easier.

  • How to list all the rows from the table VBAK

    Friends ,
    How to list all the rows from the table VBAK.select query and the output list is appreciated.

    Hi,
    IF you want to select all the rows for VBAK-
    Write-
    Data:itab type table of VBAK,
           wa like line of itab.
    SELECT * FROM VBAK into table itab.
    Itab is the internal table with type VBAK.
    Loop at itab into wa.
    Write: wa-field1,
    endloop.

Maybe you are looking for