How to keep vertically arranged fields to print on the same page?
Hello,
my report contains fields that are vertically arranged. I want the report to print all the fields on the same page and not if the page is too small at the end that the half of the fields are printed on one page and the rest on the next page. But there should be more than one data sets on one page (it is no solution to generally make a page break before the fields - it only concerns the end of a page).
Is there a printing mechanism to anchor fields together?
Thanks in advance for your help.
kind regards
Monika Anna
1. Are these vertically arranged fields within the same group? If so, you can try right click on the Group section, Select Change Group, and then Go to Option Tab and select Change Group together.
2. Otherwise, if you want to fit certain amount of rows into one page, then you can write your own running total and Set New Page when that running total reach eg: 20 rows.
Similar Messages
-
HP Laserjet P3015 double sided - the last odd page prints on the same page when printing two copies
HP Laserjet P3015 double sided printing is set up on Windows 7. When printing two copies of a document, if it has odd number of pages, the last page is printed on both sides of the page. There is no page feed for the last page.
Suppose say there are 3 pages in a document and you want to print two copies. It prints like 1/2, 1/2 and 3/3. The third page (odd number) print on the same page. The last page page does not print on two pages.
It works alright on Windows XP.Hope that you have configured the correct paper type and size in the printer hardware and also selecting the same paper tray, size, type from the printer driver while printing.
It may be caused due to the job formatting done by the application software or some jobs settings done from the job/application or printer driver. Check by toggling the 'collate' option and also try to print from a different application software.
Please mark the post that solves your problem as Accepted Solution
Click the 'Kudos Thumbs Up' if this was helpful. Thank You!
(Although I am an HP employee, I am speaking for myself and not for HP) -
I'm trying to activate my itunes gift card but it keeps saying invalid code. When I follow the iTunes support it keeps taking me round in circles to the same page. What do I do?
I imagine a ton of people are attempting to activate after the update, and the server is getting overloaded. Simple patience, maybe keep trying, and if possible, try a little later. Think of it as all those people lining up at Apple Stores + about a million more.
-
How do I duplicate or copy a table onto the same page?
In Pages, how do I duplicate or copy a table onto the same page?
option drag duplicates anything or copy and paste
Peter -
How to make fields grow dynamically within the same page and in column wise
Hi,
Like the newspaper format: Where contents of news are shown columns wise.
We need to make the fields in a page grow column wise within that same page.
For example, in a page:
Column 1 Column 2
ASDASDASDGKASHDGKAA | ASDFASGFHSJFAJKSD
ASDFASDFASDJFASGJKDFHA | ASDFASDASDFASDFASD
AFSDFASDFASDHGFKASDFASD | ASDFASDFASDFASDFASDFA
ASDFSDGFJASHDGFJKASHDGKFAS |
ASDFAGASDHFKASHDGFHASDJKFHASJKHF |
ASDFHASGDKFASDJGHFASDFJKSDGFJKAGSDJ |
If the Column 1 is full with the fields in the page it should start filling the column 2 which is also in the same page.
If the Column 2 is also full then only it should move to the next page and should continue the same scenario.
Please suggest a better way to do this in the Adobe Output Designer.
Thanks and regards,
Gurunath V.
E-Mail: [email protected]
P.S: Please also mail to my e-mail ID.Hi Gurunath, if you steel need a solution on this problem, I think this could help:
1- place two fields on the form (JF01, JF02), one under each other.
2- Make two subform with them (Sline1, Sline2)
3- Make the field JF02 expand on same subform.
4- Modify the preamble in this way:
^define group:D_line1 \field$POSITION\reserve"0.333",in\subformSline1.\positionsave,"first_line"
^define group:JF01!OnOverflow \groupG_Sline2.\fieldJF02.
^define group:G_Sline2!OnBOF \positionrestore,"first_line"\positionright,"3.65",in
In the data file put all the text in JF01.
-The first line say:
When JF01 is called, save it's y position (\positionsave,"first_line")
-The second line means:
when the text overflow JF01 put it in JF02.
(cause JF02 overflow on itself all the remaining data is overflowed in JF02)
-The third line means:
if JF02 arrives at the end of the page (OnBOF), restore the saved position ( \positionrestore,"first_line") and move to the right of "3,65" inches (\positionright,"3.65",in).
In other words, when JF02 arrive at the and of the age, the next field JF02 is positioned at the same height of JF01 and is shifted on the right
Take care that in this way JF02 cannot anymore go o a new page.
Hope this help.
Andrea -
Multiple marketing labels printed on the same page
Hi Experts,
we are using marketing campaigns in order to get a label for each business partner that to target group. For printing the label we are using a form which we assign to the campaign at execution start time.
The problem is that we get a page for each business partner with its label printed, but what we want is 24 labels be printed on the first page, corresponding to the first 24 business partners of the target group, and so on with the rest of pages and business partners.
Does somebody know how to achieve it? Any suggestion?
Thanks in advance.
Best Regards,
RosaHi Rosa,
I also have same requirement.
I know its old post.. still Did you get solution for it?
-Thanks,
Ankita -
How can I put report parameters and report on the same page?
I want to have a page that has user input (text fields, checkboxes, radio buttons, etc.) at the top of the page, with a submit button. When the user submits the page, I want the resulting report (returned from a query) to display below the input area.
With ASP or JSP I would write a page with a FORM at the top, with the ACTION submitting to the same page. If the ASP/JSP detects it was submitted (by looking at the request URL or form parameters), it queries the database and displays the report; otherwise it doesn't query the DB or show any report.
How would I do this with with portlets?
Thanks!<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Hui Zeng ([email protected]):
1. Create a form using the Appbuilder
2. build a report
3. create a dynamic page, in this page
call the form, then query the databse:
<oracle>
begin
portal30.wwa_app_module.new_instance(
p_moduleid=>1060253649);
end;
</oracle>
<p>
<oracle>
begin
scott.example_report.show(
p_arg_names=>portal30.wwv_standard_util.string_to_table('_show_header'),
p_arg_values=>portal30.wwv_standard_util.string_to_table('NO')
end;
</oracle>
4. expose this dynamic page as a portlet <HR></BLOCKQUOTE>
I tried the above, but it didn't work. The form was displayed, but I couldn't find any way to make it go to the report. Is there something more that needs to be done? I'm new to Portal, so any help you can give me on entering parameters and passing them to a form (preferably on the same physical page) would be appreciated.
null -
Printer printing to the same page - no break or fresh page
When we are submitting more than one request to our printer (simultaneously), it prints the second job not starting from a fresh or new page, however it continues to print continuously on the same page on which it had printed the previous job output.
Please advise.
ManpreetHi Manpreet,
Not sure what you mean by "simultaneously" or what format you are printing, perhaps you need to put a page feed "control-L" in between requests?
Alternatively, if you mean concurrent requests one after the other, sounds like the printer driver you are using is missing the reset string.
System Administrator, Install, Printer, Register
Query the printer you are printing to, note the type.
Click on the Printer Types button
Query the Type you noted.
Find and note the driver for the style you are printing.
Click the Driver Button
Query the Driver you noted.
Make sure the Reset field is present with value like '/eE'
Regards,
Gareth -
How do I get my library to show in the same page as playlists
In the older version of iTunes the library was visible in the Playlists "list", so when I had an item I wanted in a particular playlist, all I had to do was drag it there. I got a dialog box if it was already there. Now, in V11 (which is ugly, slow, clunky, hard to use and generally awful BTW - another post-Steve screw-up) the library nolonger shows up in Playlists, so I have to right click on the song in the library, then select "Add to Playlist", then manually scroll down through the playlists to the one I want, as the mouse wheel is disabled, then highlight the playlist I want. I can't do a multiple select, and the dialog box forgets where I was so it doesn't default back to the same playlist if I'm doing multiple transfers. ***.
system preferences - print and scan - you'll see your printer on the left side - click it and drag it to your dock.
-
HT202297 how do i get a calendar to show on the same page as my reminder as it use to be?
How do I view a monthly calendar to the left on the same task as my reminder screen as it use to be before changes were made?
Did you solve this problem ?
-
How do I get my documents to print on the entire page?
I have an hp 6600 office jet ....
How do I get it to print a full page...every tie I email anything it appears in the top left corner using only a quarter of the page?
Thanks.Hi Hearingaids;
I'm sorry to hear you are having problems printing.
To further assist you would you please provide some further information:
1) What type of HP printer do you have?
2) What is the model/product number of your HP printer?
3) What program are you trying to print from?
4) What steps are you taking to send your print job to the printer?
I have included a link for you on how to find your model/product information.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=bph07555&cc=us&dlc=en&lc=en
Happytohelp01
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP -
How may I assure b/w copy prints at the same-size as my original artwork?
For example, the dimensions of my b/w original artwork are 5 x 8 inches. However, the printed (HP Deskjet 6520)
copy measures appx. 5 1/8 x 8 1/8 inches! I'm unsure why this is happening. What adjustments may I make, and
where may I make them so that my 5 x 8" original art will be 5 x 8" on the printed copy?
Many thanks for your suggestions/directions.
Curious,
GeorgeI have found laser printers, such as the one you are printing on, do distort the print out a small amount usually about .016" or less. Being the nature of toner on paper and a fuser heating both. But for a 5" X 8" image this seems a bit much (as you report .125"). If your Options are set to Do Not Scale and Media Defined By Driver, in the print dialog it should be printing to scale, 100%. Unless you are Ignoring Art Board and using Marks and Bleed to add Trim Marks. This will take the extremities of the artwork and add trim marks to it, which may be the reason you're .125" over.
What is your Bleed set to? Is your document set to Use Document Bleed Settings?
If you have Scale to Page selected with a 8" image, your piece will be enlarged to fit to the page printed to. And if you have an 8" wide (although you put 5" first so I should assume this is the width) and have scale to page selected your image should grow to fill the width of 8.5" sheet, less the printers unprintable margin. -
How do you get 2 different link colors on the same page in DW CS4
Hi
After creating a white link called “white link test” in a blue background, I need to create a blue link called “blue link test” in a white background. How do I accomplish this task In DW CS4? I would greatly appreciate any feedback. Thank you
<style type="text/css">
<!--
#apDiv1 {
position:absolute;
width:117px;
height:47px;
z-index:1;
background-color: #0000FF;
left: 6px;
top: 103px;
a:link {
color: #FFF;
-->
</style>
</head>
<body>
<div id="apDiv1"><a href="file:///C|/wamp/www/laserzone/public_html/add_maintenance.php">white link test</a></div>
<p> </p>
<p>blue link test</p>
</body>
</html>Nothing has changed. A stylesheet is still a stylesheet. And pseudo-classes are still pseudo-classes.
You need to define a set of link states (link, visted, hover, active) for each ID or class name required.
Let's say you want to have red links in your #header and white links in your #footer.
CSS:
#header a {text-decoration:none}
#header a:link {color:red} /**unvisited**/
#header a:visited {color:gray} /**visited**/
#header a:hover, /**on mouse over**/
#header a:active, /**on click**/
#header a:focus {text-decoration:underline}
#footer a {text-decoration:none}
#footer a:link {color:white}
#footer a:visited {color:yellow}
#footer a:hover,
#footer a:active,
#footer a:focus {text-decoration:underline}
HTML:
<div id="header">
<a href="some-link.html">Link in the header</a> |
<a href="some-link.html">Link in the header</a> |
<a href="some-link.html">Link in the header</a> |
</div>
<div id="footer">
<a href="some-link.html">Footer link</a> |
<a href="some-link.html">Footer link</a> |
<a href="some-link.html">Footer link</a> |
</div>
For more on CSS pseudo classes:
http://www.w3schools.com/css/css_pseudo_classes.asp
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb
http://alt-web.blogspot.com -
How to open a link from search engine in the same page
I just noticed that my links are opening in new windows instead of on the same page on Safari. Is there anyway I can change it back to where if I click on a link in the Yahoo search engine that it would just open within the same page without opening a new tab or window, where I can go back and forth between pages? For example, say I type in "wikipedia" on Yahoo home page and click search. Then it takes me to the Yahoo! Search Results page with a link to the Wikipedia website. When I click on that link, the Wikipedia home page loads right within the same page instead of opening a new tab or window and loading into that new tab or window. If I wanted to go back to the search results, I can just click the back button. I remember Safari doing that before, is there anyway to get back to that? Thanks.
You can set the Integer pref <b>browser.link.open_newwindow.override.external</b> to "<i>1</i>" on the <b>about:config</b> page.
*http://kb.mozillazine.org/about:config
The browser.link.open_newwindow.override.external pref uses the same values as this pref for JavaScript window.open() calls.
*http://kb.mozillazine.org/browser.link.open_newwindow.restriction -
How to update a report from a form on the same page when form item changes
I have a portal form from a table and a portal SQL report with a bind variable on a page. I want the report to get updated with details based upon what was selected from a form item. The form item is a selection from a dynamic LOV. Whenever the form item gets changed, the report should get updated to reflect the change. Can this be done using a javascript ONCHANGE event?
Oracle Portal Version is 10.1.2.2.0.Your applet can open an URLConnection and read directly a document from your webserver.
public String readText() {
java.net.HttpURLConnection conn = (java.net.HttpURLConnection)myURL.openConnection(); ...
}So using JavaScript on your page, you might call readText() to fill that textarea.
The interesting link you gave, handled the JavaScript/Applet interaction. Test that with just return "Hello";.
The real programming is more interesting.
Maybe you are looking for
-
What is the correct procedure to
newbie here..loving my logic as oppose to those yrs with a pc....i got some giga cd's..i want to trnasfer them into logic..i read the manual..but i guess i sort of slow with my mac....how do u transfer GIGA files into logic pro 7.2..can anyone pls as
-
Help! I'm in UK and need to recharge but when I plug in (using a power converter) the square white unit is buzzing - what does it mean? I am using a power adaptor that works for other items - shaver, phone etc. and they don't buzz - it's coming from
-
Account payable,account receivable, asset account
HI sir /madam i want to know the process of ACCOUNT RECEIVABLE, ACCOUNT PAYABLE,ASSET ACCOUNT what ficos consultancy do, what are steps in fico do other then mm and sd person do. i want to know the only fico job in in this process AP,AR,AA.
-
Can MII 12.2 be installed on top of a 7.3 NW configured as an AAEX
Hello, To be able to locally leverage the new Java Idoc adapter released with NW7.3, we would like to know if someone has already tried to install MII 12.2 on top of a NW 7.3 configured with AAEX usage type ( PI advanced adapter engine extended) ? i
-
Firefox is showing different amount in bank Account & Government Personal Files
Win 7/64 bits - Firefox 35.0.1 Been using Firefox for few years; 2 weeks ago, I am on my Government Personal File and it shows an amount I received each month. The amount is different from what I am actually receiving. I call the office and they are