How to kill feedback loop?

I'm working on a project - no files are selected for recording, but there is feedback always on that's driving me nuts. Sorry, novice user here and I can't find a clue in the manual. Any idea?

Don't have a MBP but ut sounds to me like the internal microphone is feeding back.
Go into Utilities/AudioMIDI Setup and change the input to Line-IN, and or bring down the input volume.
Just a guess.
pancenter-

Similar Messages

  • MIDI feedback loops

    Per a different thread discussion, I've started using Plogue Bidule to host most of my Audio units and I'm using IAC to send MIDI from MainStage to Blogue.
    However, I frequently get popup dialogs warning me that there is a MIDI feedback loop and I'm prompted to "go online" or "stay offline". I'm doing the latter and everything works fine but I'm wondering how to fix this problem (or at least get rid of the dialog).
    I'm not near the machine at the moment but I'm wondering if MainStage is automatically receiving MIDI back from those IAC ports and just blindly sending events out again? If that's what's happening, I can probably create some more dummy MIDI devices and associate them with those ports but it's a pity to have to do this.

    This doesn't really answer your question, but I am using Reason with MainStage through rewire and can remote control reason fine with MIDI. Once I launch Reason I can create an external instrument channel strip in MainStage. Then I can set the port to Reason and choose a channel, and then map one of my knobs to send a specific midi controller on this external channel strip. Then Reason receives this midi controller whenever I turn the knob on screen. I imagine you should be able to do something pretty similar with Live in slave mode...

  • Help: how to kill a bpm process

    I create a bpm process with an infinite loop and my server crash everytime.
    How to kill this process.

    Hi Capro
    Log into NWA
    Navigate to manage processes
    NWA-> Operation management -> Processes and Tasks -> Manage Processes
    Select the nasty process instance and click on Actions> Cancel
    By doing so you will be canceling the process instance and this will help in saving your server from crashing
    If you are using 7.20 there are options to handle this too from BPM System Overview
    Regards,
    Harsha

  • How to kill a BPM Process

    Hi Guys,
    I want to know how to kill a BPM process.
    any help would be appreciated
    Thanks,
    Srini

    Srini,
    Refer this -Re: How to stop infinite loop?
    raj.

  • Plug-Ins in a delay feedback-loop

    I would like to set plug-Ins in a feedback loop from a delay plug-In
    maybe in a simalar way like this:
    from a audio track "send", i route the send signal in a delay. the delay output goes after in other plugins (filter, reverb, pitch shifter) and comes back in the delay input, but only maybe maybe 20%-30% of the output volume.
    Does anybody know how to do this routing?

    Admittedly, I had not tried the routing I had posted. I was just "thinking it through"... evidentially, not very well...
    I knew I'd read multiple posts over at Sonikmatter about this sort of thing. Here's the first one I came across doing a quick search:
    http://community.sonikmatter.com/forums/index.php?showtopic=7282
    See if that gets you closer to what you had in mind...

  • Gmail IMAP "Copying message" feedback loop

    Yesterday I sent an email with 10mbs of attachments from mail.app through gmail imap. after the message sent, I noticed that the spinning icon next to the gmail inbox was perpetually spinning. in the 'activity' window, it says:
    Gmail Synchronizing with server
    copying message
    I figured mail.app and gmail were synchronizing the email. so i let the process go for a few hours yesterday, when I noticed that no new email had come in via gmail, so i checked the account through the web browser. sure enough to find new email, but nothing coming through to mail.app. so i cancelled the process and but the activity status just said "STOPPING: copying message" and didn't go away. So I restarted mail.app. as soon as mail.app was back up and running, the "copying message" status reappeared.
    Last night, I let the operation go throughout the night, to wake up this morning with nothing changed. So this morning I checked my "recovered messages (Gmail).mobx" folder to see several 345mb message files. I removed the whole "recovered messages (Gmail).mobx" folder to the desktop and restarted mail.app but I still have the same error.
    Incidentals:
    The original message with the 10mbs of attachments was a series of 47 photos. Originally, I had dragged full res photos(6-7mbs/photo) into a mail.app message and chose "medium" from the "image size" pop-up at the bottom pane of the message.
    My theory is that in between placing the photos in the message and mail.app resizing them, mail.app and gmail tried to save a draft of the message to the server with all the photos at their original size (they might have been somewhere around that 345mb mark). And somehow mail.app is freaking out continually trying to upload a draft of the message with 345mbs of attachments. just a theory.
    how do i get mail.app and gmail imap out this weird feedback loop?
    Message was edited by: Ed Fladung

    I had the same problem myself, except that the message contained over 200 pictures. The actual email was only 7MB, but Mail must have decided to create a draft before it resized the pictures. I only noticed the problem after Mail had consumed over 1.5GB of my limited bandwidth and was taking up almost 4GB in RAM, and a lot more in swap. The solution here worked, but it's unfortunate that I needed it at all. Why would I ever want Mail to upload attached photos to an IMAP server at their original size, especially after the final version of the email with resized photos has already been sent? This NEEDS to be fixed, since it could be a huge problem for someone who is less computer savvy.

  • Speedy-33 feedback loop

    Hi, i'm using speedy-33 as my DSP target and i wish to perform a feedback loop. i tried the example found in the NI website but it shows error that the array size is mismatch.
    Does anyone know how the data flows?
    Let say when i create an analog input, it is a 1-D array. Inorder to create a feedback loop i need to create an array of known size 1st, am i right to say that?? From there onwards, wat are some of the ways that i can can my array size or when do i need to alter my array?
    Can anyone pls help??
    Thanks

    Hi steven,
    Thanks for the reply,
    Using labview 8.2, DSP target speedy-33
    Currently i'm trying to get a feed back from my sample delay function then add back to my signal to create a reverberation effect.
    problem
    1)the waveform i see from my waveformchart are square wave.
    2)I try to set my frame size at 1024 but the programm just run for a few sec and stop.
    3)my audio signal sounds like transformer singing!! 
    can someone help me point out where my problem lies on??
    Thanks in advance.
    Attachments:
    Feedback using for loop.vi ‏49 KB

  • How to kill Active Data Request in DSO

    Hi all,
    I have 2 dsos ( A, B). Data loads from A to B.
    Now I have deleted data from DSO B by using option delete data ( did killed one running request by turing the status to RED).
    when I try to load data again to DSO B, it is not allowing me to execute the DTP.
    Message is Request 257.617 is stil processing.
    I am SAP BI 7.0 environment.
    Please suggest how to kill active request ( I am not seeing it RSMO/SM37).
    I tried to use Zombie Request FM, it didnt worked.
    Thanks All,
    Jason

    Srinivas,
    Thanks for the reply.
    When I go RSRQ
    I can see the request , the exception it is showing is CX_RS_FAILED logged.
    SM51, when try to kill the process it says
    SAP System Message:
    Work Process restarted; session terminated
    Apologies for earlier post messages saying that I did nt saw the message in RSMO, I can see it is in yellow process.
    Please suggest how to kill the processes .
    Apperciate your response..
    Thank you
    Jason

  • How to kill a job in SM37

    hi All,
             can someone wxplain me how to kill a job in SM37 which is delaed by 10,000 secs.
    cheers

    Hi Rase,
    goto SM37 and click on the active selection and enter the jobname and then click excute the particulr job should appear highlight the jobname then click on the stop iconthat appears on the taskbar( 3 rd from left)
    or goto SM50 Click on the process and select process->stop without core
    or
    set a running infopack of the chain (in RSMO) to red, thats will stop the chain (if there are no parallels, else set all parallels to red).
    ****Assign Points If Helpful****
    Regards,
    Ravikanth

  • How to stop while loop when a specified function is terminated?

    I want to make a program which has 2 thread, one of which is to control some devices, and the other is to measure outputs of the devices.
    To do that, I should make a 2 independent loops, but there comes a problem here.
    I want to terminate 2 loops at the same time, but it's difficult for me to do that, because when I try to notify upper sequence's termination to lower loop by some value change, they have some dependency.
    That's why I need your help. I want to know how to stop lower loop when the upper sequence's termination keeping their independency.
    Please let me know. Thank you.
    Attachments:
    help.JPG ‏200 KB

    Is the upper loop commanding the lower loop at all?  I would think you would have some type of communication between the loops.  Just use that communication to send a stop command.  Or the next best way is to just simply use a notifier.
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines

  • Cant sync my iphone contacts with yahoo, it says "unknown error (4)" and tells me to come back later, been doing it for months. Any ideas on how to kill it?

    cant sync my iphone contacts with yahoo, it says "unknown error (4)" and tells me to come back later, been doing it for months. Any ideas on how to kill it?

    Hey joshuafromisr,
    If you resintall iTunes, it should fix the issue. The following document will go over how to remove iTunes fully and then reinstall. Depending on what version of Windows you're running you'll either follow the directions here:
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    http://support.apple.com/kb/HT1925
    or here:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    http://support.apple.com/kb/HT1923
    Best,
    David

  • How to set a loop on an .flv so that an exported .swf loops?

    hi there. i am using Flash CS4 and I would like to know how to set a loop in an flv file so that when it is exported to swf, the movie will loop. Basically i have taken an existing interactive flash movie and have decompiled it into its individual flv counterparts. what i intend to do is take out all the nonsense from each flv file and then reconstruct the flash movie, export each file to swf and then convert each swf to avi or some other video format. to do this i will be using sothink swf to avi converter which allows you to convert swf files to avi files. this program allows you to convert swf files that loop by looping the swf file for as long as you want until you stop it, in which a video file is created from "the recording"
    after i decompiled the original file, many of the existing flv files were already set to loop. i know this because when exported to swf the swf file would loop. now when i went ahead and went into each flv file to edit a couple things, when i went to export them to swf, the swf files wouldn't loop. mind you, some of them did loop, and some of them did not loop. the ones i have edited are all supposed to loop and i cannot figure out what it is thats preventing some of the flv or exported swf files to loop. all i did was take out a few unnecessary frames from the beginning of each flv and nothing more. i am pretty new to Flash and do not know anything about coding and know very little about flash settings.
    i figured that selecting the "loop playback" option in the control drop down menu might help seeing as the flv file does loop when played in the editor, but again when exported to swf the swf file does not loop. what confuses me the most is that some of the exported swf files do loop. ALL of the exported swf files need to loop and my guess is that in order to make that happen, something in the flv file needs to be set correctly.
    can someone please assist me with this issue? if there is a way to simply loop an existing swf file that does not loop, can someone tell me how to do that? any help with this problem is greatly appreciated and i appologize if something like this has been asked before.... i just couldnt stand looking through 22 pages of search results to find the exact solution to my problem
    thank you!!!

    Hi,
    You can use shortDesc property. Something like
    <af:commandToolbarButton text="Some Button"
          id="ctb1" shortDesc="This button does something.."/>-Arun

  • How to kill TP process at OS Level

    Dear ALL,
    How to kill the TP process at OS level
    Operating System : win 2003

    Q.1 Different Method for Kernel Upgradation
    So far till now, I have known only one method for Kernel upgradation which is very very simple. I dont think we need any other work-around for Kernel upgrade as this method is very very straight forward. The steps to be followed are ---
    Go to the SAP OSS Site :- 
    http://service.sap.com/SWCenter-Main
    From here Download the kernel programs in a temporary folder or use Download Basket toi download the Kernel.
    Now shutdown the R/3 database and all services including saposcol. 
    Create a folder and copy the original executables from  /exe/run/ directory then uncar the downloaded files and replace the original executables in /exe/run/ directory. 
    Then restart your system. 
    A couple of important points to remember are :-.
    a) Always make a copy of the files you're going to replace. For e.g. Create a directory (oldkern) and copy all the old files before replacing them (this helps when sometimes the new Kernel has problems, and you can revert it)
    b) You have to shutdown SAP and the Database using the OLD kernel file. Again it is good practice to shutdown everything first.
    Regards,
    Mandar

  • How to kill process/Actavity in SAP ?

    How to kill process/Actavity in SAP ?

    The core file contains the memory state of the work process at the point it was terminated. You could use it for debugging the work process if you had access to the kernel source code, which you don't unless you are SAP. For most people, then, the core file is of no interest and just takes up space in the operating system's file system. Using "cancel without core" is the thing to do.
    That said, sometimes I find "cancel without core" doesn't actually work but "cancel with core" does. I always try without core first, but occasionally have to resort to with core. If you do cancel with core, make sure to go and delete the core file afterwards to avoid the file system filling up. Work process core files can be large. You'll find it in a directory/folder here - /usr/sap/SID/DVEBMGS00/work (substitute DVEBMGS00 as appropriate).
    Steve.

  • How to kill a  session in stored procedure or trigger.

    Can anyone let me know, how to kill a particular session in stored procedure or trigger.
    Regards
    KVSS

    also you cannot attempt to kill ur own current session.
    But on what circumstances you want to kill the session.
    When anyone trys to access a table and lets suppose the trigger onthat table activates
    and you want to kill that very session which activated the trigger ???
    i dont think its possible. To kill a session definitely you should be in a different session and
    then only you can achieve that.
    pls check it out
    prakash
    [email protected]

Maybe you are looking for