How to know how many process chains were scheduled?

Hi guys,
Is there any table o transaction to know how many process chains per client were scheduled?
I need to know per client how many pchains were scheduled and the technical name of each one.
Thks and regards,
EV

Hello,
SM37 - Search for BI_PROCESS_TRIGGER scheduled jobs.
Regards,
Jorge Diogo

Similar Messages

How to know to which process chain a infopackage belongs to?

Hi experts!
I got the name of a infopacakage (also its technical name), but I would like to know to which process chain it belongs to,
Does someone a quick way to know it?
Thank you very much in advance!!

Hi Raul,
If you open the infopackage there is an option at the top 'process chain maint.' Click this and it will give you the proces chain it belongs to.
Thanks,
Nick.

How to know contents of process chain

hi sap guys,
i am currently working on documenting bw support for the infocubes,ods etc..,so how can i know the information like that
Volume Calculation,Overall Parameters,Parameter Default Override Used
Bytes per Dimension ,Bytes per Key Figure ,Factor for PSA,Factor for Aggregrates,Factor for Indexes,Factor for Master Data.
plz help me,and also if possible plz send the sap bw support documentation to my email id:
[email protected]

Hi,
http://help.sap.com/bp_biv170/index.htm
In that..Business Intelligence-Specific Information
Check sizing...you will get most of the answers...
Regards,
San!
if helpful,assign points

How to identify which process Chain is Scheduled.

Hi All,
We have 20 Process Chains in our project.In SM37, i have checked the Scheduled Jobs in SM37 and found "BI_PROCESS_TRIGGER" job is triggered. How can i find which process Chain is scheduled out 20 Process Chains.
Can i get the Process Chain Names from Tcode SM37.Or else, Do i need to check each process chain Start Time ?
Pls suggest.
Thanks,
Jelina.

Hi,
Please refer
/people/gianfranco.vallese/blog/2008/05/30/stop-boring-with-process-chain-monitoring-start-passive-monitoring
https://wiki.sdn.sap.com/wiki/display/BI/Processchainscreationandmonitoring
http://help.sap.com/saphelp_nw04/helpdata/en/39/2ade42fa712b78e10000000a155106/frameset.htm
Hope this helps
Regards
Raj

How can I know who Unscheduled Process Chain

Hi,
I am looking for a way to know who unscheduled process chain.
After looking in forum I got to know about Table TBTCO but there are huge no. of entries in that.
Above that I need to know about a chain that was unshceduled on 4th May can I give that selection while looking in TBTCO Or any selection related to Process chain name ? Please suggest.
Let me know if there is altogether other way to find this out.
Thanks in Advance

Hi,
It is not possible to trace who have de-scheduled the chain....we can de-schedule the chain in two ways.......
open the chain in the Design View --> In the top "Execution" tab --> Remove from schedule.......(In this case the whole chain will turn in grey)
If someone do this then there will be no log........
Secondly, right click on the "Start Process " in the Design View --> Display Scheduled Jobs --> from there delete the released job......In this case also there will be no trace...........no log.........(In this case only the start process will turn in grey, rest of the chain will be in green colour only)...
Now as I have explained the colour difference from there you can understand that how the chain was de-scheduled ....in which method...........
But you can't trace that who has done it......
Regards,
Debjani.......

How to handle delta failed process chain steps

Hi All,
I have a query regarding process chains were in processstep has delta load and there is dependency between the predeseccor and successor process steps,then
if the delta load fails due to any one of the following reasons
1) due to remote_icp locked the prtclr Infoobject the process step is executing .
2) due to any psa records errors and so on
Then how to handle delta and see that correct delta records were updated .
Because again for the nextday loads if the previous delta is incorrect it will give pop-up message that it is not possible.
If any suugestions pl guide me.
thanks
Venkat
[email protected]

1)Remove the lock by force from sm12 or wait till the lock is gone.Then see if the delta data has come till the PSA.Mark failed delta load RED and back it out from target.Then read everything in manually from PSA to target.
In process chains u can go the monitor entry for the failed load by..highlight chain..click log icon..give selection..for proper selection..see the failed node..right click..display messages..click on process monitor.
Sometimes even if infopackage is run successful manually,next steps in the chain do not kick off.
Use Siggi's excellent blog on this..(it works really well)
/people/siegfried.szameitat/blog/2006/02/26/restarting-processchains
2)Make request RED and back it out from target.
Correct records in the PSA and read everything in manually from PSA to data target.
Then use Siggi's blog.
If data hasnt come to PSA do a delta repeat.
Always check yesterday's chain run about 1-2 hrs before today's chain kicks off.
cheers,
Vishvesh
Message was edited by: Vishvesh

How to check the parent process chain of a meta chain

Hello Friends,
Recently I joined a new project, which is of environment BW 3.0. I am trying to find the dependent process chain's parent, but could'nt able to find them. I went through all the process chains manually to check whther the dependent process chain is mentioned in them, but could'nt find any......
Can any of you help me to know how to find the parent process chain of a meta chain ?
I really appreciate your time, will be awarding points to any answers.......
Thanks,

Hello Radhan,
thanks for your quick reply. I searched the table based on your advice, but i could'nt get the parent process chain's name. Can you throw some more ideas please..........
Thanks,

How can we set a process chain to trigger the nodes w/o manual intervention

SDNers,
We have a Master PC which has the loading & activation of some Hierarchies.Wats happening is some of the hier activations are failing (we got track of the root cause as well) and the nodes below are not getting triggered automatically, eventhough they have been designed to get triggered irrespective of success or failure of this hierarchy activation. The chain prompts for the u2018Status change & trigger the following eventsu2019 opo-up and only when it was said u2018yesu2019, the subsequent node gets triggered in the chain. If this manual intervention was not there, the Chain gets struck at the activation node, whic is running in yellow status for long, though a short dump - error has already been thrown.
My query is how can we set a process chain not to anticipate the manual intervention of chnaging the status & trigger events pop-up

Hi ravi,
i'm not sure abt the query but what i got thru ur qustion is u have to automtaically go to the next load/step even the proceess chain fails in the step......
for that we have the same master meta chains with link of so many local chains...for this even if there are some interventions/fails in between the process chains it never gets stopped....
it goes to the next step and we'll work, analyse and finish the failed load manually....the next day it'll be
fine...
b4 to this make sure that there is no dependency for the previous loads....
And now the solution i found for this is in the process chain design itself.......
while giving the links itself we'll be getting the options as status RED,GREEN and RED(or)GREEN.....now if u got for the third option the event goes to the next step even it is unsuceesful....
rgds,
nkr.

How to stop the running process chain

How to stop the running process chains or infopackges...just qm status change is enought?

BI - SM 37 - Kill the Job
ECC - SM 50 - Kill the job

How to create document in process chain

Hi,
can u plz tell me how to create document in process chain and wat i need to edit the text for particular info package when document.

Hi Anil,
Goto Tcode:RSPC and select your load data process type where you have to right click on the process chain and select Select create message,there are three types of messages
1>Successful
2>Error
3>Always
If you already created message then go to maintain message
Where you have two buttons
1>is for Edit Document
2>Maintain Recpiants
Goto Edit Document and put your comment and set their mail address in Mail recipiants.
Note there are 2 types of messages you can kept at execution of infopackage process type.
If load is successful send the mesaage to recipients
If load is failed send the message to mail recipt.
It would help you.

How to trigger a local process chain to run manually

Dear Experts,
In my company, I have a Daily process chain.
In this Daily process chain, it contains many other local process chains which are grouped by modules.
For example, I have created the following 3 process chains:
- Accounts Receivables Process Chain which contains all the required process for loading FIAR data.
- Accounts Payables Process Chain which contains all the required process for loading FIAP data.
- Inventory Process Chain which contains all the required process for loading Stocks data.
These 3 process chains are scheduled one after the other in the main process chain which is called Daily Process Chain.
FIAR needs to be successful before FIAP can run and Inventory chain will run only after FIAP is successful.
Normally it runs without any problems.
But recently, when the previous chain is successful, the next process chain does not get triggered to run.
In the end, I have to manually execute the remaining process chains to start running.
With this, all data are loaded, but the Daily Process Chain status for the day is yellow because it is not complete.
Is there a program or method which I can execute or use to trigger the process chain to continue to run in the Daily Process Chain? If there is, please let me know so that I can avoid having to run the process chains manually one by one.
Thanks in advance for your help.
Regards,
Shunhui.

Check thid thread with the similar issue:
Process Chain - Node untriggered.
/people/siegfried.szameitat/blog/2006/02/26/restarting-processchains

Explain: how to include Infospoke in Process Chain where destination is DB

Explain: how to include Infospoke in Process Chain where destination is local machine database [NOT Flatfile]

Hi vijay,
First you create an Infospoke with destination as a DB table in your local BI or BW Machine. Now add this infospoke by going through below steps.
1. Call up the process chain maintenance. Choose This graphic is explained in the accompanying text Process Chain Maintenance from the Administrator Workbench toolbar. The Process Chain Maintenance Planning View screen appears.
2. In the left-hand screen area of the required This graphic is explained in the accompanying text display component, navigate to the process chain in which you want to insert your InfoSpoke. Double-click to select it. The system displays the process chain plan view in the right-hand side of the screen.
If no suitable process chain is available, you need to create a new process chain. You can find additional information under Creating a Process Chain.
3. To insert a process for extraction by means of an InfoSpoke, choose This graphic is explained in the accompanying text Process Types in the left-hand area of the screen. The system now displays the process categories available.
4.In the process category Loading Process and Post Processing, choose the application process type This graphic is explained in the accompanying text Data Export into External Systems.
5.Insert the Data Export into External Systems application type with Drag&Drop into the process chain. The dialog box for inserting a process variant appears.
6.In the Process Variant field, enter the name of the InfoSpoke that you want to include in the process chain, or select it by means of the input help.
Once You have added the infospoke you have to write a program which will fetch the database table that you filled and transfer the data fetched to other legacy system with the help of XI System
For more information on how to infospoke on 3rd party pls find the link below
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5f12a03d-0401-0010-d9a7-a55552cbe9da
Hope this help
Harish

How to know how many equipments can be produced?

Hello friends,
One equipment is having bill of material. How to know how many equipments can be made with the stores stock? How to know for making min. no. of materials reqd for making optimum no. of equipments?
bye,
srinivas.

Hi,
Please have a look at the Rules of Engagement before posting to these forums. The link is here:
[https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/rulesofEngagement]
Once you have read the above, please provide the necessary information.
Regards,
Amit

How can we delete a process chain?

Dear Ones,
By Mistake I have converted an infopackage group into process chain in Quality system. How can we delete a process chain?
Thanks,
Raj

Hi Bhanu,
I've doubt that what is the difference between cancel with core and cancel without core with respect to process chain.
Could you please advice how do we start a process chain daily without using the schedular window for transaction data.
Thanks in advance...
Amarnath.

HOW TO KNOW HOW OLD IS THE PHONE

How to know how old is the iphone

Plug the SN in here:
http://www.chipmunk.nl/klantenservice/applemodel.html
This will tell you when your phone was made.

How to know how many process chains were scheduled?

Similar Messages

Maybe you are looking for