How to know if Leopard is running in 32 or 64 bit ?

Hi,
I have a mac book pro & a friend has an Imac, how to know if we are both running Leopard under 32 or 64 bit.
I see that Leopard support 64, but didn't find if it was actually running in 64.
Regards,
Benoit

Benoit34 wrote:
Hi,
I have a mac book pro & a friend has an Imac, how to know if we are both running Leopard under 32 or 64 bit.
I see that Leopard support 64, but didn't find if it was actually running in 64.
Regards,
Benoit
Welcome to Apple Discussions:
if your computer is 64-bit, Leopard is running in the 64-bit mode. There are a few caveats about this but basically this is the case.

Similar Messages

How to know if system is running in 40W low performance mode ?

I experienced the same problem than described in this topic: lower performance with charger than with battery!
(But I had set everything on Maximum Performance both in BIOS and in Windows's Power settings, so I think everything was done on software-side).
How to know if the system runs with lower performance (is it a 40W max mode? btw how did you know it is called "40W mode" ? I saw this figure nowhere else than in the mentioned-above topic) , except using a soft to do some benchmarking? Is there a place in BIOS (I didn't find!) ?

Benoit34 wrote:
Hi,
I have a mac book pro & a friend has an Imac, how to know if we are both running Leopard under 32 or 64 bit.
I see that Leopard support 64, but didn't find if it was actually running in 64.
Regards,
Benoit
Welcome to Apple Discussions:
if your computer is 64-bit, Leopard is running in the 64-bit mode. There are a few caveats about this but basically this is the case.

How to know what reports are running by looking at SSReproting Services to see what reports are running and also any clue of which application is using the reporting services?

How to know what reports are running by looking at SSReproting Services to see what reports are running and also any clue of which application is using the reporting services?

To see what reports are running, take a look at the execution log views that are available in the database. Which views that are available are dependent on your version of SSRS.
http://technet.microsoft.com/en-us/library/ms159110.aspx
To see which application is using SSRS is a little more difficult. You can turn HTTP logging on, which will give you an idea of where connections are coming from, so you can see IP addresses. You can also look at the execution log view to see
user accounts. So, depending on your environment and use of service accounts, this could be easy, or difficult.
http://technet.microsoft.com/en-us/library/bb630443.aspx
If all else fails you can look for clues in the SSRS logs. Good luck...

How to know whether a material run heuristic in apo?

Hi Expert
I want to know whethere a material run heuristic in a heuristic job. We do not need to run heuristic manually.
Just like a material run mrp in R/3 system in mrp job. Which master data field in need to maintain in product in apo?
Thank you : )

Dear Liting,
The First part of your question is already answered by Datta.
If you want to know the fields than there are some on which the heuristics are run.
Product master -> Lot Size Tab.
Reorder point --If the stock comes below the given level than the Planning will triggered.
or
Product Master -> PP/DS tab
Planning Procedure.
PP planning procedure.
I hope this helps you.
Regards,
Srinivas.S

How to know BPEL process is running

Hi,
I have BPEL process which is triggerred by FileAdapter. File Adapter polls for every 120seconds and if any file exists, it reads and BPEL process is initiated.
As BPEL proccess is big and sometimes it executes more than 120seconds and it depends on environment with less load process faster and more load its takes more time.
Due to this is there a way to know BPEL process is running before fetching new file or before starting actual BPEL process.
JDev: 11.1.1.6.0
Thanks,
Bhaskar

Can a singleton bpel will resolve your problem ?
At a time only one bpel process will be running there wont be any parallel instances for that bpel. In that way there wont be any second instance created until the first instance has done with its job.
http://orasoa.blogspot.co.uk/2007/05/create-singleton-process.html
http://blogs.bpel-people.com/2009/04/writing-singleton-bpel-process.html
Give points - it is good etiquette to reward an answerer points (5 - helpful; 10 - correct) for their post if they answer your question.
Thanks,
Vijay

How to know if a MRP run element is using Quota Arrangement and lot size?

Hi all,
Two questions:
A) How to determine if a source is actually pulled from Quota Arrangement?
I am wondering if there is anyway from ABAP table or from Transaction (i.e. Purchasing Order) in which the source is pulled from a Quota Arrangement?
We use scheduling agreement, PIR and source list, and as well as Quota Arrangement for our purchasing.
I just want to know how, from system (table and transaction), to find out the source is from quota, not from PIR or others.
B) Quota Arrangement still can work properly if lot-size procedure's splitting quota indicator not Checked?
If my the lot-size procedure which I am using for a material does not activate the splitting quota indicator, it means split quota will not work during MRP run.
But does this also mean that quota arrangement will not be working for this particular material even if I have create a a quota arrangement object (via MEQ1) for this material?
Thanks
Daniel

Tomek,
If I want to use the split quota, it seems there is some pre-requisite.
If you go to MEQ1 and press F1's on the "Minimum qty split" column, and you will notice the following message.
Allocation by quota using splitting quotas is only carried out via a requirement planning run, subject to the following preconditions:
Through the appropriate entry in the field Quota arrangement usage (on the MRP data screen 2 or Purchasing screen) it must have been specified that a quota arrangement is to be applied in the planning run.
The indicator for the splitting quota must be set for the the lot-sizing procedure used for materials planning purposes in Customizing.
Hence, the quota arrangmeent still workable even if the lot-size does not have the spliting quota box checked?
Indicator: Splitting quota in short-term horizon
The indicator for splitting is used to determine that in the case of the selected lot size, the quota arrangement is to be applied using the splitting logic.
Use
If this indicator has been set, the lot is split up in the planning run according to the following formula:
quota for source X
Quantity for source X = --------------------- * requirement
sum of all quotas

How to know number of databases running

HI Experts,
How to easily know how many databases are running in Windows OS and Solaris OS
Thanks
Shaan

Hi Adith,
It means i have to loggin to sqlplus, but even if i logging to sqlplus it won't show total numbers of databases running on the server. Is there any other way to know.
My query is how do I know about number and name of the databases running on a server which is unknown to me. Lsnrctl is one option, but it also doesn't give the 100% result.
Thanks
Shaan

Installing oracle db in linux, how to know if it's running?

Hi all, I have installed oracle 9i in my red hat linux box, but I'm getting few problems (Logging as root):
1) if I type lsnrctl status i get:
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 9.2.0.1.0 - Production
Start Date 03-MAR-2004 15:49:11
Uptime 0 days 4 hr. 5 min. 4 sec
Trace Level off
Security OFF
SNMP OFF
Listener Parameter File /oracle/db/product/9.2.0.1.0/network/admin/listener.or
a
Listener Log File /oracle/db/product/9.2.0.1.0/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=pingpong
.us.oracle.com)(PORT=1521)))
Services Summary...
Service "ETSDB" has 1 instance(s).
Instance "ETSDB", status BLOCKED, has 1 handler(s) for this service...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "hct.apps.oracle" has 1 instance(s).
Instance "ETSDB", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
is this ok? why does it say BLOCKED?
2) if I try my installation using sqlplus scott/tiger, I get the following:
QL*Plus: Release 9.2.0.1.0 - Production on Wed Mar 3 20:00:17 2004
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
ERROR:
ORA-01033: ORACLE initialization or shutdown in progress
Enter user-name:
why is that?
thanks!

I have installed oracle 9i in my red hat linux box, but I'm getting few problems (Logging as root):
r.- the Oracle services must started as the user Oracle not as root.
2) if I try my installation using sqlplus scott/tiger, I get the following:
QL*Plus: Release 9.2.0.1.0 - Production on Wed Mar 3 20:00:17 2004
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
ERROR:
ORA-01033: ORACLE initialization or shutdown in progress
r.- With what user did you start that instance ?
Joel Pérez

How Would You the Kernel's Running on 64-Bit Mode?

Hi. Is there an indicator in Snow Leopard to know if it's running the kernel in 64-Bit Mode? How would you know the kernel's running in 64-bit? Thank you in advance.
Gbu.

Open System Profiler in the Utilities folder. Click on the Software entry in the sidebar list. You will see the following:
Note the entry labeled, "64-bit Kernel and Extensions." If you are running the 64-bit kernel the entry will say, "Yes."

Command to know number of instance running on Linux

Hi Friends,
Can any body tell me how to know number of instances running on Unix/Linux platform .
Regards
Mukesh

And if you add *| wc -l* to that, it will give you the number of instances + 1. This might be useful for scripting purposes.
wc -l basically gives you the number of lines.
Regards,
Mike

Upon launch of Lightroom after initial instalation a warning came up that said lightroom needs to create temporary files and cant open. The it opened and the catalog i imported will not show the images. How can I give permission? Running windows 8.1 64

Upon launch of Lightroom after initial installation a warning came up that said lightroom needs to create temporary files and cant open. Then it opened and the catalog i imported will not show the images. How can I give permission? Running windows 8.1 64 bit. I have avast virus software.

Upon launch of Lightroom after initial installation a warning came up that said lightroom needs to create temporary files and cant open. Then it opened and the catalog i imported will not show the images. How can I give permission? Running windows 8.1 64 bit. I have avast virus software.

Run on a Windows 64-bit operating system either as a native application or under WOW64

I am using Visual Studio 2013 Professional, and need to compile my application in a way that it works with existing libraries on my system that are only 32 bit.
I read this someplace .... "When you compile an application, you can specify that it should run on a Windows 64-bit operating system either as a native application or under WOW64 (Windows 32-bit on Windows 64-bit). WOW64 is a compatibility
environment that enables a 32-bit application to run on a 64-bit system. WOW64 is included in all 64-bit versions of the Windows operating system."
Can anyone tell me HOW I "specify that it should run on a Windows 64-bit operating system either as a native application or under WOW64 (Windows 32-bit on Windows 64-bit)." ?

Hi Davepc,
Based on your issue, I think the pvdg42 and Wyck's suggestion are really help you. So if possible, I suggest you can try their suggestions to check your issue.
In addition, I get some useful message from the MSDN document, I assume that it maybe useful for you.
(1)So if your application is VB, I suggest you can refer the following document to check your issue.
https://msdn.microsoft.com/en-us/library/8ck8e1y2(v=vs.110).aspx
(2) If your application is c#, please refer to:
https://msdn.microsoft.com/en-us/library/zekwfyz4(v=vs.110).aspx
(3)If your application is c++, please see:
https://msdn.microsoft.com/en-us/library/h2k70f3s(v=vs.80)
Hope it help you!
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How do I install Leopard on the partition I've created on my MacBook Pro running Lion?

I've partitioned my hard drive (running Lion) so that I can run Leopard. How do I install Leopard on the partition? I've put in the Leopard CD and restarted, but all I get is a black screen with a bunch of gibberish.

There's no way the MacBookPro will boot to Leopard.
Snow Leopard may be possible, but you'd need the original discs from Apple customer Service - the retail disc isn't a high enough version.
To check viability of Snow Leopard, have a look at a.brody's article;
https://discussions.apple.com/docs/DOC-2455
If it looks like SL is feasible ring the Apple Customer Services with the model and serial no. and see if the original SL discs are available.

How do I know if I can run a game?

Hi, I know a Mac isn't ideal for gaming. I dont want answers back saying im an idiot for buying a mac for gaming, because that isnt the case. I just want to know what I am compatible of running though. I know there is the Can I Run it site, but I am not sure if that is always reliable. ALSO I WILL BE RUNNING WINDOWS 8 VIA BOOTCAMP.
So, by looking at my cpu and gpu, and looking at the requirements for a game, how do i know if i can run it? I would appreciate it if you can tell me if this example will work, but how does the average person know if it will work, by comparing the specs?
My specs:
MacBook Pro (Mid-2012)
RAM: 8GB
CPU:2.3GHz quad-core Intel Core i7 processor (Turbo Boost up to 3.3GHz) with 6MB L3 cache
GPU:Intel HD Graphics 4000 1024 MB & NVIDIA GeForce GT 650M 512 MB
Here is the game:
Batman Arkham Origins (recommended settings)
RAM: 4GB
CPU: Core i5-750 Quad 2.66GHz
GPU:GeForce GTX 560
Also, if I meet the minimum requirements for the gpu, but far exceed with the cpu and ram, what does that mean?
And... If one of my graphics cards is 1024MB, does that mean I can run games that require that much memory on the gpu? Even though i know the geforce I have is better.
I am just very confused, someone please clarify, I would really appreciate it.

Once your site is published, you can tell if it is text or graphics by trying to select the text when the site is pulled up in your web browser. If you can select it, it is text. If not, it is a graphic.
See this page for a summary of the forum discussions on text to graphic issues.

How to know the timings of the run time of thr report

Hi,
Can you please tell me how to know the run time of the query , i mean how much time it took for the query to dispaly the results .
Also we have these queries in the workbook. How to refresh the work book . is it enough if i refresh the query.
Thanks
Sruthi

Hi
How can we check in RSRT tcode?
And how can we do i RSRTRACE?
Can I know the procedure.

How to know if Leopard is running in 32 or 64 bit ?

Similar Messages

Maybe you are looking for