How to know in which roles an iview is being used

Hi,
We would like to know if a specific iview is being used by any portal role.
It there any kind of "where used" report where I can investigate the relations between portal content objects (iview, page, workset, role) ?
I tried the PCD Toool but it seems of no help
thanks
Moti

Dear Moti,
As Debasish stated, you can check the Tracing Delta Link Dependencies for the iview in which you can find the where particular iview is used in the page, workset or role in the SAP Portal.
Refer to [Tracing Delta Link Dependencies|http://help.sap.com/saphelp_nw70ehp1/helpdata/en/76/3a0841aaccf023e10000000a155106/content.htm]
Hope it will helps
Best Regards
Arun Jaiswal

Similar Messages

  • How could I find which i-views/pages are being used

    Hello
    I am pritty new in portal area. I have to administrate an ESS/MSS portal during hollydays. I am trying to find everywhere the way.
    How could I find which i-views/pages are being used. Let say I can see which group I belong and which roles are behind.
    How could I know in which PCD folder they are taken into account (to e.g give permission to someone not in the group)

    HI,
    the user administration (UME) gives you the information about the user <-> group <-> role assignment.
    When you know the role, search in the PCS for it, open the role and you will see all the pages / iviews assigned to the role.
    SAP Help: Role Assignment: http://help.sap.com/saphelp_nw04s/helpdata/en/59/bf2287b3cb5e48af94f99929ad15b9/content.htm
    SAP Help: Content Administration: http://help.sap.com/saphelp_nw04s/helpdata/en/5a/0339000c0b11d7b84800047582c9f7/content.htm
    br,
    Tobias

  • How to know in which roles a given query is ?

    Hello,
    Suppose I have a certain query.
    Is there a way to know in which roles this query is other than do a manual search in pfcg?

    Hi Roy,
    You need to recheck the settings ,  i tried assigning web template to role , and while i try to transport it thorugh transport connection using following options
    Grouping indataflow afterwards
    collection mode : collect automatically
    display as list.
    And this shows me query involved and roles to which it is attached to.
    Hope that helps.
    Regards
    Kapadia
    ***Assigning points is the way to say thanks in SDN.***

  • Which version of jwsdp is being used

    How can I determine which version of jwsdp is being used? Is it by jar name?

    Depends entirely on what you choose to export:
    File -> Export Photo
    Will export The current version, the original, a jpeg, tiff or png. All of them will be the edited version except the Original.
    If you want to move all your versions between Libraries check out iPhoto Library Manager
    Regards
    TD

  • How can I see which roles or users have access to a table?

    How can I see which roles or users have access to a table?
    For a given table, how can I see the grants, who and what?
    Many thanks

    dba_tab_privs.
    Grantee can be a role or an user, as roles are fake users.
    Sybrand Bakker
    Senior Oracle DBA

  • HT201407 how to know under which carrier has the phone been issued

    how to know under which carrier has the phone been issued

    If you bought it from an authorized Apple reseller, it should say on the receipt. If you bought it from a private seller, ask that seller, or call Apple Support and they may be able to tell you.
    Regards.

  • How to find out which type of the driver is used in our application?

    Hi all,
    can anyone tell me how to find out which type of the driver is used in our application?
    Thanks in advance,
    Phoeniox

    Hi,
    Check out this...
    Class.forName("com.mysql.jdbc.Driver"); //if u r using MySql
    List drivers = Collections.list(DriverManager.getDrivers());
                   for(int i=0;i<drivers.size();i++)
                        Driver driver = (Driver)drivers.get(i);
                        String driverName = driver.getClass().getName();
                        System.out.println("Driver "+i+":::"+driverName);
    you need to load the driver and display in the same program.
    Then only you'l get the required result.
    prakhyath

  • In a Smart Group in AddressBook 6.1, how do I designate which email addresses I want to use?

    In a Smart Group in AddressBook 6.1, how do I designate which email address I want to use for contacts who have more than one address when I'm mailing to the whole group? The "Edit Distribution List" is grayed out.

    Thanks, Barney, but that's not really my question. The "Edit Distribution List" is in the Edit menu on my version, too, but I can't use it to edit the email addresses of contacts who are in Smart Groups. In the version of AddressBook I was using before I bought a new MacBook Pro and upgraded to Mac OSX Lion, I could use the "Edit Distribution List" to pick which email address I wanted to use for contacts in Smart Groups with more than one address. Apparently that isn't an option in Lion. The Help menus for AddressBook 6.1 even say that "Edit Distribution Lists" doesn't work for Smart Groups.
    Okay. I get that. But some of my contacts have more than one email address, so how do I choose which email address I want Mail to use for these contacts when I send an email to a Smart Group they're in?

  • How can I determine which profile Firefox 5 is currently using?

    How can I determine which profile Firefox 5 is currently using?

    in address bar type:
    '''''about:cache'''''
    and look at '''''Offline cache device -> Cache Directory'''''

  • Hi when i am giving credit card number in payment gatway it should change to password dots , how it is possible, which plug in i have to use

    <blockquote>Locking duplicate thread.<br>
    Please continue here: [[/questions/891259]]</blockquote>
    Hi when i am giving credit card number in payment gatway it should change to password dots , how it is possible, which plug in i have to use for this feature...

    Hi vishwanath123-
    Most websites when asking for your credit card do encrypt your password, but it is not based on a plugin. The website is responsible for securely receiving and storing your data. If you do not trust the website is secure, be careful with your data.

  • HT2101 i got an iphone 5c last saturday. i noticed that after merely 5minutes of using facebook, my phone got warmer than the usual. i know that phones will get warm if being used but getting a warm phone after just 5minutes of surfing with 3G seems not n

    i got an iphone 5c last saturday. i noticed that after merely 5minutes of using facebook, my phone got warmer than the usual. i know that phones will get warm if being used but getting a warm phone after just 5minutes of surfing with 3G seems not normal. compared it with iphone 5 and 5s and they are not getting warm like that. is it a software or hadware issue?

    My eyes just glazed over...Please in the future break down each of your issues with paragraphs separated by two carriage returns. It would be much easier when trying to address your issues.
    Go to Apple menu -> System Preferences -> Keyboard and Mouse -> Mouse
    And edit your mouse settings to do what you want it to do.
    Secondly, this is not the place to vent. If you have a complaint, there is:
    http://www.apple.com/feedback/
    or http://www.apple.com/contact/
    We are just end users here helping other end users.
    Third, from my understanding, it would appear you are concerned about the noise the hard drive makes when it falls asleep? Why not put your machine in screen saver mode instead? Apple menu -> System Preferences -> Energy Saver turn off all Energy Saver settings, or set them to run Never.
    Fourth, if your machine was purchased just a few days ago, you may still be able to get an exchange from the store, quicker than you can get a repair done. You may want to look into that possibility.
    Fifth, it does appear you found the Logic forum. I would persist in asking there how to solve your technical issue with Logic regarding the audio. It may be you don't have to do anything special to the hard drive. Remember audio can be transmitted by wire, avoiding ambient sounds.
    Good luck!

  • How to know on which time dimension level we are ?

    Hello,
    I would like to know is there a variable or a mean to know dynamically on which time dimension level we are in order to use that in a CASE WHEN clause ?
    By using a sort of aggregation tables in which one of the column contains the name of the level, I could know on which level I am but I can't use that for drill down. What I mean :
    Tab1 :
    'Year' as typelevel, year
    Tab2 :
    'Month' as typelevel, year, month
    In BMM, I have made one logical table with as Source tab1 and tab2 and as columns typelevel, year and month.
    tab1 has in content column the year level
    tab2 has in content column the month level.
    So when in Answers I retrieve
    typelevel, year
    the result is : 'Year', 2008
    and when I request : typelevel, year, month
    the result is : 'Month', 2008, 1
    But if I want to drill from year to month in order to have :
    'Year', 2008
    and then after drill
    'Month', 2008, 1
    it is impossible as a filter on typelevel='Year' is added on the month level, so it retrieves 0 columns.
    If someone has an idea on how to do that it would be very great.
    Thanks in advance for your help.

    Hi Supriya,
    OOTB I think you can use SharePoint designer, but I would suggest  custom code to iterate to all pages, and get the lists that are associated with these pages.
    http://stackoverflow.com/questions/633633/sharepoint-how-can-i-find-all-the-pages-that-host-a-particular-web-part
    another one would be if those lists were never used and you can check for list with empty data.
    I would use Get-SPLists to get all of the lists to check for zero items.
    http://blogs.technet.com/b/heyscriptingguy/archive/2010/09/15/use-windows-powershell-to-manage-lists-in-sharepoint-2010.aspx
     http://sharepointrelated.com/2011/11/28/get-all-sharepoint-lists-by-using-powershell/
    Hope this helps!
    Ram - SharePoint Architect
    Blog - SharePointDeveloper.in
    Please vote or mark your question answered, if my reply helps you

  • How to know on which pages a particular list is being used?

    Hi
    So we have this site which has not been cleaned up for a while resulting in the creation of many lists many of which are not being used as well. I want to know that where all a particular list is being used i.e on which all pages so that if the list is not
    being used, I could delete it. Is there any simple way to do it.
    Please share your thoughts:)
    Thanks
    Supriya Sinha

    Hi Supriya,
    OOTB I think you can use SharePoint designer, but I would suggest  custom code to iterate to all pages, and get the lists that are associated with these pages.
    http://stackoverflow.com/questions/633633/sharepoint-how-can-i-find-all-the-pages-that-host-a-particular-web-part
    another one would be if those lists were never used and you can check for list with empty data.
    I would use Get-SPLists to get all of the lists to check for zero items.
    http://blogs.technet.com/b/heyscriptingguy/archive/2010/09/15/use-windows-powershell-to-manage-lists-in-sharepoint-2010.aspx
     http://sharepointrelated.com/2011/11/28/get-all-sharepoint-lists-by-using-powershell/
    Hope this helps!
    Ram - SharePoint Architect
    Blog - SharePointDeveloper.in
    Please vote or mark your question answered, if my reply helps you

  • How to find out which roles belong to a collective role?

    Hello,
    i loop over at an internal table which contains names from agr_1251-agr_name.
    No I want to find out if the role is a collective one, and if this is true, i want to find all single roles belonging to that collective role.
    Do you have any ides if there is a Function existing or in wich tables I can find I am looking for?

    Thx for your answer.
    Yes I did.
    In this table can I see if a role is a collective one, but I don´t see which roles belong to this role.

  • How to know the which week in GregorianCalendar API

    Dear all
    does someone know that way when i use GregorianCalendar this API to know the which week is
    for example in this month has 6 week and 2008/08/27 is week 5 , dose any idea i can know it in this program
    import java.util.Calendar;
    import java.util.GregorianCalendar;
    import java.util.Date;
    import java.text.DateFormat;
    public class DateExample5 {
         public static void main(String[] args) {
              DateFormat dateFormat =
              DateFormat.getDateInstance(DateFormat.FULL);
              // Create our Gregorian Calendar.
              //GregorianCalendar cal = new GregorianCalendar(2008,05,10);
              GregorianCalendar cal = new GregorianCalendar();
              //cal.setTime(new Date());
              System.out.println("System Date: " +dateFormat.format(cal.getTime()));
              // Set the day of week to FRIDAY
              cal.set(GregorianCalendar.DAY_OF_WEEK,GregorianCalendar.SUNDAY);
              System.out.println("After Setting Day of Week to Friday: " + dateFormat.format(cal.getTime()));
              cal.set(GregorianCalendar.DAY_OF_WEEK,GregorianCalendar.MONDAY);
              System.out.println("After Setting Day of Week to Friday: " +dateFormat.format(cal.getTime()));
              cal.set(GregorianCalendar.DAY_OF_WEEK,GregorianCalendar.TUESDAY);
              System.out.println("After Setting Day of Week to Friday: " +dateFormat.format(cal.getTime()));
              cal.set(GregorianCalendar.DAY_OF_WEEK,GregorianCalendar.WEDNESDAY);
              System.out.println("After Setting Day of Week to Friday: " +dateFormat.format(cal.getTime()));
              cal.set(GregorianCalendar.DAY_OF_WEEK,GregorianCalendar.THURSDAY);
              System.out.println("After Setting Day of Week to Friday: " +dateFormat.format(cal.getTime()));
              cal.set(GregorianCalendar.DAY_OF_WEEK,GregorianCalendar.FRIDAY);
              System.out.println("After Setting Day of Week to Friday: " +dateFormat.format(cal.getTime()));
              cal.set(GregorianCalendar.DAY_OF_WEEK,GregorianCalendar.SATURDAY);
              System.out.println("After Setting Day of Week to Friday: " +dateFormat.format(cal.getTime()));
              cal.add(GregorianCalendar.DAY_OF_MONTH,7);
    }Edited by: roger5089 on Aug 26, 2008 9:25 AM

    import java.util.Calendar;
    import static java.util.Calendar.WEEK_OF_MONTH;
    public class DateExample5 {
        public static void main(String[] args) {
            Calendar cal = Calendar.getInstance();
            int weekOfMonth = cal.get(WEEK_OF_MONTH);
            System.out.println(weekOfMonth); //5
    }Never used Calendar.WEEK_OF_MONTH, but I had a butcher's hook and found this documentation:
    <quote>
    Field number for get and set indicating the week number within the current month. The first week of the month, as defined by getFirstDayOfWeek() and getMinimalDaysInFirstWeek(), has value 1. Subclasses define the value of WEEK_OF_MONTH for days before the first week of the month.
    </quote>

Maybe you are looking for