How to know is bluetooth exists in win8 device T430s ?

I bought a second hand Thinkpad T430s, I don't know whether or not this device has a Blutooth !
When opening the Setup of BIOS, it shows that (BLUETOOTH [ENABLED])
But I'm using Win 8.1 Pro, and in the drivers list, there is no bluetooth driver for Win 8.1, at the same time, I can't find my icon for bluetooth device in the control panel !
I would like to know how to check if I have Bluetooth device ? Is it possible to show in BIOS that the Bluetooth is enabled while there is no Bluetooth device at all ?!!
Thanx
Solved!
Go to Solution.

If the above page does not list a Bluetooth module (might be listed as something BRCM BT3 or BT4 or something), then your machine did not ship with Bluetooth hardware from the factory.
It is normal for the BIOS to list Bluetooth as an option under I/O Port Access even though you do not have a Bluetooth radio installed.
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

Similar Messages

How do i know if bluetooth is on

How do I know if bluetooth is on? HP ENVY dv6 notebook PC

Hi,
You can see something like this normally:
Hope this helps.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How to know given email id is exists or not

HI,
I am sending email from my application after registration. if the user register with an email which is not existing, i need to find out. but how to know whether the given email id is exists or not.
when i am trying to send email to not existing emails id, it is not throwing any exception also.
can you please help me in resolving this
thanks in advance

Sampi-n wrote:
my requirement is like this.
when the user registers with his email id, it will mails him the password and first time it will automatically login(default login) to the application with out asking for username and password.
here i am sending mail to the given mail id. here i am not able to find the email was delivered or not. if i get to know that ican display registratin fails on the page with put default loginIt's best do it the way pbrockway2 suggested:
Or you could send some mail to the id containing a link which, when followed, completes the registration process. If the recipient doesn't mail back, have the registration fail. So you ask the user to enter his/her email id. Send an email with the verification link and/or key. Tell the user to check their email and either click the link or enter the registration key in some form. Once that is done, you mark their email address as verified and email them their username/password (personally, I dislike it when sites mail me my password. It's an insecure medium and there is no need for me to see my password when I've just registered, I just would like an option to reset it, that's all). Don't send a mail with the username/password before you've verified the account. What if the user misspelled the email id? The username/password could end up with someone else. And since most people use the same username and password everywhere, you'd be exposing their details to a stranger.

How to know the existing NLS_LANG and Character Set

Dear all
How can I know about the existing NLS_LANG and Character set setting for Oracle 8 (Unix platform)
Thank you
Kwan

You can see this from the following
NLS_DATABASE_PARAMETERS (i think it is how database was created)
NLS_INSTANCE_PARAMETERS (this instance)
NLS_SESSION_PARAMETERS (this you can set just for your login session).
HTH
Srinivasa Medam

How to know the existing BDC in the system

how to know the existing BDC in the system
cheers
AJ

Hi,
You can check for existing recordings in your system in t-code SHDB. This transaction is also used for recording a transaction and generating a function module or a program from the recording which you can then use in your program. There are no standard existing BDC's as far as I know. Because most of the times the BDC table is filled programitically and then passed to the Call Transaction.
regards,
Advait Gode.

How to know existing Adobe Flash Player license status-.

how to know existing Adobe Flash Player license status….

There is no "license" for Flash Player as it's free. There is an End User Agreement, but you accept that BEFORE installing.
To check installation status, rtight click ANY flash content and choose "Global Settings". Select the Advanced tab.

Pls let me know how do i cancel my existing cloud subscription as cancel link is not available in my manage subscription page. I am planning to us lightroom cc subscription

pls let me know how do i cancel my existing cloud subscription as cancel link is not available in my manage subscription page.
I am planning to us lightroom cc subscription

This is an open forum, not Adobe support... You need Adobe support to cancel a subscription
-start here https://forums.adobe.com/thread/1703848
-or by telephone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html
--and two links which may provide more details, if the above links don't help you
-http://helpx.adobe.com/x-productkb/policy-pricing/return-cancel-or-change-order.html
-http://helpx.adobe.com/x-productkb/policy-pricing/cancel-membership-subscription.html

How to know username and password from existing PPPOE broadband connection?

Hi All,
I am using windows server 2008 R2, and now I've used PPPOE broadband connection to connect the internet. what I am asking is how to know the username and password from my PPPOE setting, I have the requirement to create same setting in the difference machine.
thanks.

You can get this info from your ISP. This one may help.
Create a Broadband connection using PPPoE in Windows Vista and Windows Server 2008
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

How can I use Bluetooth

I want to know about Bluetooth operating system
How can I connect Bluetooth to other I phone
And get video from them?

You can't do that. That's not a feature of the iPhone.
http://support.apple.com/kb/HT3647?viewlocale=en_US&locale=en_US

How to use the not exists query

Hello,
Using obiee 11g,
i would like to know how to deal with not exists query in the obiee11g,
the query is like this
select count(a.col1),a.col2 from table1 a ,table2 b where a.col1=b.col1
and not exists
(select d.col1 from table3 d, table4 e
where d.col1=e.col1 and d.col1=a.col1)
group by a.col2
there are 4 tables.
table1,table2,table3,tabel4
this is what i need in a report,these tables are used in othere places also,
would prefer if its possible to do in for a report i.e.e analysis itself.
If not possible then may be in rpd since if i change in rpd it may reflect every place
and not in for a report itself.
thanks

Implement this in report itself can be a tricky and tedious job..But better to have it in RPD - Physical - Select Table type
USE NOT IN in place of NOT Exist..You can simply use SELECT statement in SELECT TABLE TYPE
Hope it clear

Memory Upgrade and How do I add Bluetooth to S10-3

Hi,
Newbie here, just got my S10-3 last week and love it. I have upgrade to Windows 7 Pro and would like to increase the memory and add internal Bluetooth if possible. What type of memory card do I need to go to 2M? Lowest cost and brand/model number would be great information if you can provide it. Do you think it's possible to add Bluetooth internally? I know I can add using USB external, but would really like to keep it internal and keep all three USB ports free for other devices.
Thanks Much!!!
Solved!
Go to Solution.

Re: Memory Upgrade and How do I add Bluetooth to S10-3[ New ]
04-05-2010 06:54 PM
Hi ssedqwick you solved Bluetooth?
Thx
EMERSON VIER
No, I have not. I think there is a connector for USB in the motherboard, but don't know for sure. Someone that works on the S10-3 will know the answer, so just have to wait and see if that person shows up.

How can I insert an existing ApDiv into a tab in the Spry Tabbed Panel?

I have 5 of them all containing nested Apdiv within nested ApDivs (a long storie ) that I would like to insert into 5 tabs in the Spry Tabbed Panel.
Please help.

"Hi Gramp,I realize I have made hard work for myself but I really don't know any better. I also realize now that taking on this project may have been a mistake :-)I taught myself how to use the design side of Dream Weaver. These five ApDivs were created in the content area of the spry tool and it worked fine. (yes a lot of work though)For the first time I looked at the code side. I wanted to try to bring a peace of code from another page for something unrelated and when it didn't work I took it out and without noticing, deleting a line from the Spry tool.Of course like a classic newbe I was working without a backup copy so here I am. Loosing hours of tedious work and on the verve of tears :-)I do have some questions though. My APDiv
What does "apDiv1" stands for and what does "My APDiv" stands for?Is the only thing I have to do is changing this line for my five ApDivs and paste it in the appropriate places in the code? Thanks again,Gilaad
Date: Sat, 16 Jun 2012 20:39:07 -0600
From: [email protected]
To: [email protected]
Subject: How can I insert an existing ApDiv into a tab in the Spry Tabbed Panel?
    Re: How can I insert an existing ApDiv into a tab in the Spry Tabbed Panel?
    created by Altruistic Gramps in Spry Framework for Ajax - View the full discussion
You have really made hard work for yourself by using APDiv's. I suppose it can be done, but I would not. To answer your question, I have create an example as per#apDiv1
My APDiv
Content 2
Tab 1
Gramps
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4498679#4498679
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4498679#4498679. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Spry Framework for Ajax by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

How apple support my iphone who ever my serial is replaced and how i know my iphone is refurbished ??

Hi everyone! I have iphone 4s, which was my friends bought it from canada appstore about 1 month before and has serial number DQ*******TDD and IMEI ****. When i try to check warranty on the page https://selfsolve.apple.com/wcResults.do i see
We're sorry, but this is a serial number for a product that has been replaced. Please check your information and re-enter your serial number. If your information is correct, you may need to contact us.
And if i try to enter IMEI here i see
Our records indicate that this product has been replaced. Please provide the serial number for your replacement product to find the support and warranty coverage information. For more information, please contact us.
Does it means, that I was bought a non exist iPhone? Or it was refurbished? I need an official answer to take them to seller because I was bought iPhone as a new.
How I know my iphone is refurbished?
Thank you.
answers that i folow up and find are :
- Did you purchase the device from Apple or an authorized reseller? If not, then you were scammed.
- It means you bought a gray market phone that was replaced, reported lost, or reported stolen, then re-sold illegally. It has no warranty and Apple will not service it with an out of warranty replacement.
- If your phone was replaced, it was most likely refurbished.
- You cannot tell the difference between a refurbished phone and a new one.
- check your serial number if its starts with 5K then its refurbished model
Not true. All it does is identify it as 'service stock'. It may be refurbised, or it may be new. There is no way for you, or even someone at an Apple Store, to tell the difference.
6 - You bought a phone that was stolen, lost, or taken in for repair and then re-sold illegally. get your money back if you can.
If there is ever a hardware problem that requires service, you will most likely not be able to get it serviced or replaced by Apple.
7- During the refurbishment process the devices are assigned a new serial number.
8- This means that your iPhone was replaced by Apple and you entered the serial number for your old iPhone which was replaced.
9- That means that particular phone has been replaced under warranty. Where did you get the phone from? If it was used, the previous owner may have had it replaced and not returned it to Apple as they were supposed to and sold it.
10- Interpreting what you postd, it would seem you had the device replaced at some earlier stage. Apple doesn't repair but instead replaces the whole unit with a refurbished unit which has its own serial number. Whatever the case, you will have to see Apple about the matter.
11- white box (new) or a brown box (refurb)
now my questions :
how i know my iphone is refurbished and how apple support my iphone who ever my serial is replaced ??

How can I know my device is refurbished or new one??Can I check my device is refurbished or new with serial number?

How to know the amount of ora 11g page-out memory (sga and pga)?

How to know the amount of oracle 11g page-out memory ( sga and pga) in the SunSolaris 10 Unix and Linux.
I need to know how many oracle memory are being page-out ( all and for a one oracle server process).
thanks

You can monitor the paging with vmstat or sar commands.
http://download.oracle.com/docs/cd/B28359_01/server.111/b32009/tuning.htm#sthref500
You can also get the paging information on OEM home page if configured for your database.
But I don't know if there exists a method with which one can find out how much memory per session/server process is getting paged out.

How to know oracle client or oracle server installed in m/c ?

Hi all,
Could any one tell me how to know whether oracle 10.1 s/w installed in my machine is client version or server . Is there any easy method..??
Thanks in advance.

Hi,
Check the database / dbs folder exist in the $ORACLE_HOME if yes then SERVER else CLIENT.
PS: Above is not a standard method, i am telling based on DIRECTORY.
Regards,
Taj

How to know is bluetooth exists in win8 device T430s ?

Similar Messages

Maybe you are looking for