How to know my server adress to connect to blackberry messenger ?, how to know my server adress to connect to blackberry messenger ?

anyone can help me ?!

Hi and Welcome to the Community!
With a strong carrier network signal (e.g., not merely WiFi), I suggest the following steps, in order, even if they seem redundant to what you have already tried (steps 1 and 2 each should result in a message coming to your BB...please wait for that before proceeding to the next step):
1) Register HRTKB00510 How to register a BlackBerry smartphone with the wireless networkPlease wait for one "registration" message to arrive to your Messages app2) Delete and Resend Service BooksKB05000Delete the service book for the BlackBerry Internet Service email account from the BlackBerry smartphoneIf you have no CMIME entry, then skip the deletionKB02830 Send the service books for the BlackBerry Internet ServicePlease wait for "Activation" Messages, one per already configured email account, to arrive in your Messages. If you have no already configured email accounts, please wait 1 hour.3) RebootWith power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes.See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.Hopefully that will get things going again for you! If not, then you should contact your mobile service provider for formal support and to be sure that you are subscribed to an adequate data plan from them to enable the services you desire. Unfortunately, with that relatively old device, a full BB data plan is required from a carrier, even if the intent is to use the device via WiFi only.
Good luck!

Similar Messages

I am trying to update my iphone to the latest software version, but am getting a message saying 'make sure your network settings are correction and your connection is active'. i know my connection is active, so how can I fix this problem?

I am trying to update my iphone to the latest software version, but am getting a message saying 'make sure your network settings are correction and your connection is active'. i know my connection is active, so how can I fix this problem?

Hi there pamela123456,
I would recommend taking a look at the troubleshooting steps found in the article below.
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
http://support.apple.com/kb/ts1814
-Griff W.

How to connect to embedded POSTGRESQL on Mac OSX Lion Server

Hi all,
I've upgraded my Mac OSX 10.6 server to 10.7 server 2 days ago.
My web sites databases are still under MySQL server cause it's still running after the upgrade.
I manage to migrate the databases to PostgreSQL, so i've enabled the wiki from the server.app to launch the PostgreSQL server.
I can see that it's now running through a ps -ef | grep sql and that it's listening on the unix domain socket 5432 with netstat -an | grep SQL in a terminal shell.
The problem is that I'am unable to connect to it.
I tried psql -U postgres, and installed the Navcat for postgreSQL Lite, but they failed to connec to the database server twith the same error :
psql: could not connect to server : Permission Denied
Is the server running locally and accepting connections on Unix domain socket "/var/pgsql_socket/.s.PGSQL.5432"?
It seems that there is a permission problem on the Unix Domain Socket /var/pgsql_socket/.s.PGSQL.5432.
It has a 0770 permission on it, but i don't know if it's relly the problem.
I've compared with MySQL server, which I am able to manage through Navcat for MySQL Lite without any problem, and the socket permission are 0777 on /var/mysql/mysql.sock.
Does somebody able to connect to the embedded PostgreSQL server ?
Or am I doing something wrong ?
Thanks.

Thanks for your replies.
I was able to connect but not from navcat
sudo -u _postgres psql template1 (or your database name)
I am able to connect using this command too
1. Need to add yourself or the account accessing the database to Postgres Users group (use admin tools)
So I agree that I have to add my user to the _postgres user group, but how do you did ?
Using the admin tools, I did not find this Postgres Users group ?
I don't understand why server's administrators are not members of this group already ...
2. Create a role on database login in as _posgres
Ok, I will do.
3. To login in navcat you need to check socket to /var/pgsql_socket
OK, I've already set the socket in Navcat to /var/pgsql_socket
4. I was unable to enable TCP connection yet
I am unable to enable it too. I tried to modify the config files in /var/pgsql, without success.
I have no firewall on my server too, it's protected by my router's firewall and NAT.
Thanks again for your help.

How many users can connect to a shared drive on a non-server workstation?

How many users can connect to a shared drive on a non-server workstation? We're waiting for our server to arrive and in the interum we're using a Pegasus 2 R6 attached to an iMac running Mavericks as our fileserver. It's been sketchy, the connection to the server being dropped once in a while or the inability to mount the drive after a week of success. The Pegasus we're using now will be attached to a server once it arrives. For now I need to figure what's coausing trouble before I commit to this being our main storage as planned. The data is backed up every night so I'm not worried, its the usability issues. 5-7 people are mounting this drive and opening/saving at the same time. Is there a limit to Maverick's fileserving ability that may be causing this? Understandable if so.

The file server in the client version of OS X has a default limit of 10 simultaneous connections. That limit can be raised by installing OS X Server, or lowered by setting a hidden preference. Assuming you've done neither, you may be able to solve the problem temporarily by stopping and restarting file sharing in the Sharing preference pane, or permanently by setting another hidden preference on the server to break idle connections quickly.
defaults write /Library/Preferences/com.apple.AppleFileServer idleDisconnectOnOff -bool YES
Stop and restart file sharing. To reverse the change, run this command in the same way:
defaults write /Library/Preferences/com.apple.AppleFileServer idleDisconnectOnOff -bool NO
Credit for this solution to ASC member suter:
this file server will not allow any additional users to log on

I had to get a new iphone and want to know how to tell if my pictures from my previous phone were backed up on itunes. when i connect my c even if i'm going from a 4 to a 5s?

i had to get a new iphone and want to know how to tell if my pictures from my previous phone were backed up on itunes. when i connect to itunes, does it automatically sync / backup even if i'm going from a 4 w/IOS 6 to a 5S w/IOS 7?

Welcome to the Apple Community.
Yes you can probably delete the 2 incomplete back ups they are unlikely to work.
However, I'd be inclined to back up to a computer as well and restore from there, if you are changing your phone.

How to connect captivate file in a database (MS SQL SERVER 2008)

Hi...
How to connect captivate file in a database (MS SQL SERVER 2008) ???
Kindly response please..
thanks!!!

Hi there
See if the link below helps you out.
Click here to view
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Halfway through the OS X Yosemite update it says I am not connected to the internet (when I know I am because I can search through the app store). How can I fix this? I cannot get on Safari because it requires an update to Mac OS X 10.9 or later.

Halfway through the OS X Yosemite update it says I am not connected to the internet (when I know I am because I can search through the app store). How can I fix this? I cannot get on Safari because it requires an update to Mac OS X 10.9 or later.

Just to be clear. You have downloaded the Yosemite installer. However you say while it's updating you get the error you are not online. This is confusing since you shouldn't be able to use your computer in the process of updating.
Exactly where do you see you need to 10.9 to get on Safari?

When I try to connect to iCloud, it says there is a server error and does not log me in. This happens every time. How can I circumvent this server error?

When I try to connect to iCloud, it says there is a server error and does not log me in. This happens every time. How can I circumvent this server error?

Try restarting your computer and your router.
If there is a specific error code, take a look at this article.
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694

I'm trying to connect to my work's VPN. I am connected to the VPN, but I cannot access the server. I keep getting a message that says the server may not exist or is unavailable. I know that's not the case because my coworkers are connected. Can someone

I'm trying to connect to my work's VPN. I am connected to the VPN, but I cannot access the server. I keep getting a message that says the server may not exist or is unavailable. I know that’s not the case because my coworkers are connected. Can someone please help me?

I have the same problem. It is only with tv shows and only with programs I have downloaded after the software update.
Apple support sent me the above link too....but it doesn't solve the problem...my computer is authorized and the content is in my library and will play on my Mac air, but it will not sync the tv shows, it keeps saying my computer isn't authorized for it.
No answers here, but you are definitely not alone with this issue.

I have set up a new email account however it is unable to connect to the smtp server as it seems to be offline - how do i take the smtp server online?

I have set up a new email account however it is unable to connect to the smtp server as it seems to be offline - how do i take the smtp server online?

the smtp server is the property of the mail provider and running in their server room
talk to them
and make sure the ports required by the mail providers smtp server are not blocked by your firewall or by your router or by your isp

Does anyone know how to set up a macbook pro so that other computers can join me and use my internet connection?

Does anyone know how to set up a macbook pro so that other computers can join me and use my internet connection?

Have you set up any security on the Mac Connection Sharing?
Sorry but I don't use that so I'm not familiar with the settings.
But if you haven't setup and security the iPhone might not mind but I know most Windows computers do not like to connect to Open WiFi. and make sure it is WPA or WPA2.
Then again it may be a setting in the connection sharing like some type of MAC filtering or it may simply be that Mac OS X connection sharing only allows one connection at a time. Try disconnecting your phone and then connect the PC.
As to Linc's response about Windows.
Windows basically does care about connecting to open, unsecured, WiFi. But it will normally pop up a windows asking "Are myou sure you want to connect to this open network". And a simple click on yes will get you connected and an IP address.
So this is clearly a Mac OS X problem.

New 5s keeps saying "connection to server failed " and won't restore - ideas how to fix? Thx

New 5s keeps saying "connection to server failed " and won't restore - ideas how to fix?

Other users have been reporting Yahoo mail problems that are not iPad problems. Might be something to try on these links.
iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
iPad Mail
http://www.apple.com/support/ipad/mail/
Try a Reset - iPad How-Tos http://ipod.about.com/lr/ipad_how-tos/903396/1/
Or this - Delete the account in Mail and then set it up again.
 Cheers, Tom

HT1338 I have itunes version 10.6.3 it seems outdated and needs to be updated with latest version so that Iphone 5 can be connected. Can anyone help me know how to have latest version on my MAC

I have itunes version 10.6.3 it seems outdated and needs to be updated with latest version so that Iphone 5 can be connected. Can anyone help me know how to have latest version on my MAC

You need to purchase a Mac OS X 10.6 DVD, which requires an Intel Mac with at least 1GB RAM. Run Software Update twice afterwards.
If you're already running Mac OS X 10.6, run Software Update until it gives you the option of installing iTunes 11.
(74797)

Won't connect: "The proxy server is refusing connections." Why? How do I fix it?

I am not a computer person--the machine is a super typewrrriter and research aid; like an auto, it should just run when you buy it. But. I got a virus; tried my amatuer best to correct or fix things. The computer runs now, but will only access Internet Explorer, and Firefox is my browser of choice. Now when I click on Firefox the opening screen starts, then carries the message: "The Proxy Server is refusing connections."

In Firefox 3.6.4 and later the default connection settings have been changed to "Use the system proxy settings".<br />
See "Firefox connection settings" in [[Server not found]]
You can find the connection settings in Tools > Options > Advanced : Network : Connection<br />
If you do not need to use a proxy to connect to internet then select No Proxy

I am trying to connect my macbook pro to a windows 7 server pc.

I am trying to connect my macbook pro to a windows 7 server pc. I keep getting a connection failed message saying "The server is available on your computer. Access the volumes and files locally". Any ideas on how to resolve this? I cannot find the the volumes or know where to look for this volume

Depends on your model TV. Read your TV user manual. The newer models have "how to hookup" instructions for computer & games.
You can also do a forum search as well as a Google search.

Connection timeout depending on how many client JVMs (but as many requests)

Hello,
sorry for the cryptic title, I hit the length limit.
Here is my problem. I'm asking first for an explanation, or for ways to investigate it. Afterwards I'll need a solution but as I suspect the problem is involved, and involves several tiers, I will probably open dedicated topics instead.
Short Story*: a web service server and 10 test client JVMs work fine - but a single test client simulating 10 virtual users experiences ConnectException.
What can I log or probe to understand why?
Long Story*:
I have an application that I used to simulate load on a WebService server. The app simulates a variable number of clients of these WebServices, each virtual client running in its own thread, and sequentially calling the same set of WebServices in a fixed order, and looping.
I have, on some occasions, met various problems with the server product (under development and validation), or the test client (that may not have had the same level of attention and quality in the design as the product), some of you may remember some of my asking here and there. But we achieved a fair level of reliability.
However, today, after a few weeks' change to the server(1), we load-tested it using the test client simulating 10 concurrent clients. After a few minutes, we repeatedly witnessed a fair number (1% of the requests) of java.net.ConnectException "connection timed out" raised at the client's end. I immediately suspected the server to not honor connection requests timely, and went on monitoring the server's queues, listeners,etc.
As nothing seemed to highlight a problem on this side, a colleague suggested that we instead launch 10 client JVMs (on the same single test client machine), each one simulating one single client. I blatantly qualified his suggestion of "hopeless random try" but let him try his way.
Dang! He repeatedly demonstrated that the 10 client JVMs do not undergo the ConnectException, even though they simulate the same number of concurrent requests (well, 10 at most), at the same thoughput - and we observe the same level of server CPU, and same functional results.
I respectfully apologized for being a pretentious moron (2), but he hasn't proposed any satisfactory explanation so far, and I'm clueless too. So we haven't been able to make the "single JVM load-test client" work. We need to make this one work, for various reasons.
There may be some server-side tweaks (worker thread pools, waiting queues,... for the record it's a Glassfish server) that I may tune, but as the "regular" situation of 10 client VMs is handled appropriately, I deem the server-side setting are correct.
So I'm primarily interested in monitoring the client host and JVM(s) to spot the differences between the two scenarios. But there may be some server-side indicators as well (queue size, keep-alive pool) that may help the investigations - and if need be, I will happily tune the server for the benefit of the "test client investigating".
One track I'd like to investigate, is the way HTTP connections are reused: we're using a JAX-WS client querying a Glassfish server, and both seem to agree on using HTTP1.1 (I checked HTTP packets with tcpmon), which supposedly "reuses connections" (is that the same as "keeps TCP socket open and reuses them"?). Could it be that the 10 threads in the multi-client simulator have a bottleneck of using a shared HTTP connection(s)? I don't know how to log or monitor this:
- I did a couple of netstat dumps during the tests on the (Windows) client test machine, and it exhibits only a few hundreds of sockets in TIME_WAIT state, and a few dozens of ESTABLISHED ones.
- I don't have the numbers for the server, though.
I don't know how to investigate that further. Any clues?
I may exhibit a poor turnaround time in this thread, as the test platform is used for real tests, but I do care about the topic, so I attach shiny little dukes.
Thank you for your time (well if you've read this to the end you at least deserve a thanks!) (3)
J.
(1) and after switching test platform (room & network); lesson one: "Never mix test platform changes and other changes in the same iteration; regression-test the new test platform with the former software version"
(2) lesson two: "When you don't know, don't tell a colleague he doesn't know"
(3) lesson three: "Short posts get better attention, are better understood, and more happily replied to"... (sigh)

Hello ejp,
I not only missed your points, but missed your latest post as well :o)
I'm discovering it.
You've missed the point. Problems that only shows up with multiple clients in the same JVM but not with multiple JVMs don't correspond to real-world situations any more than the configuration does so there is little in even investigating them, and no point whatsoever in trying to fix them.
(...) It's not 'hopeless', but you have to be constantly aware that it can lead to false positives and false negatives.Fixing them woud enable me to continue load tests with a cheaper test platform. I cannot afford 10, 100 or 1000 client machines. I know you're talking about JVMs, but 10 or 100 client JVMs running on a single host is not a real-world situation either, no more than "all clients are on the same LAN". I have to do away with approximations, keeping aware as completely as possible of the differences it introduces.
This is not true for HTTP connection caching: this favors the server as much as the client, so I can't infer that it's a favorable case overall.Again you've missed the point. It can only happen inside a single JVM. So it may present you with false positives.I'm still not sure I got the point now:
-> For the server, wich are the differences between both client configurations (single-JVM vs 10 JVMs)?
- - Does a new TCP connection request from the same JVM involve less work if one is already established?
If not, and if each virtual client uses its own TCP connection, there is no cheating, and I don't need to worry about this level of bias.
- - Does an HTTP request that comes over an established TCP socket require less server work than an HTTP request that reqests a new TCP socket?
Probably (in the second case the server has to accept the TCP request and probably pool it, and assign a reader thread, etc...). So I do need to worry about this bias. One way to avoid it is to manage to have the virtual clients not using each other's HTTP connection.
And so on...
Is it possible to build a comprehensive list of the differences incurred by the single-JVM configuration?
Then for each of them, I can try to evaluate ways to alleviate the bias.
- If I managed to avoid or alleviate each and every bias, I would be back to a realistic simulation.
- If there remained only the biases that handicap the server (such as, the server crashes under a 15 clients load, whereas in reality it could sustain 25), then I could be conservative and announce "the server will handle 15 clients gracefully" to the salespeople that will establish the SLAs. I understand that I may never be able to prove that the server actually scales up to 25 concurrent clients, but as long as the conservative SLA matches the market target that will do.
- If I'm left with biases that do favor the server, then I can't rely on the test platform and I'll reluctantly but resignedly try to have a more realistic platform funded (the more likely outcome is to be asked to provide probabilities and disclaimers in the test reports).
Thanks for your help so far, and please bear with my stubborn but polite request to try to identify further the differences ad causes.
J.
Edited by: jduprez on Dec 14, 2009 5:56 PM
Edited by: jduprez on Dec 14, 2009 5:57 PM

How to know my server adress to connect to blackberry messenger ?, how to know my server adress to connect to blackberry messenger ?

Similar Messages

Maybe you are looking for