How to know Partikular Attribute belongs to which Characteristic
Hi, I have a doubt about Attribute,
For example I have a info object 0REJECTN_ST ( Rejection Status ) , my question is How to know this Attribute belongs to which Characteristic , I have to load the Master Data for 0REJECTN_ST, when I am SD master data Info sources this is not available in master data info source , when I am going to create master data info source for 0REJECTN_ST, system is giving the message
<b>Characteristic 0REJECTN_ST cannot be a master data InfoSource,</b>
If I want to load status related data , How to load ?
Shaik,
ooks like the IOBJ was created without texts or attributes. You would not be able to load any textx or attributes against the same.
use the where used option and find out where the IOBJ has been used and then you can look at how best you can att the descriptions to the IOBJ.
Arun
Assign points if helpful
Similar Messages
-
How to know the consumer_group belong to which plan
Dear all,
How to know the consumer_group belong to which plan? I found a consumer_group name TEST in table DBA_RSRC_CONSUMER_GROUPS
, but I can not locate it belong to which Plan.Do you have enterprise manager db console configured, then its easy to drill to find that information through few clicks. Not sure what's the sql query to get it. if you find one then do post here.
-
How to know the recipient belongs to which site ?
there are two sites site-1 and site-2 in a domain, and also there is a mailbox [email protected] in site-1 and a mailbox
[email protected] in site-2.
when a user for [email protected] in site-1 want to send a mail to
[email protected] ,the hub transport role can get that the
[email protected] is in site-2, so it delivery the mail to the hub transport in site-2, so my question is how did the hub transport know that the
[email protected] located in site-2,?did it get that by inquiry the global catalog,or something else?
Please click the Mark as Answer button if a post solves your problem!Site membership is determined with a series of DNS queries
during startup of the server; the Netlogon service is responsible for this. When you check the DNS entries of your Active Directory you’ll see not only the standard A records but also service records. These service records are used to find other services in
the Active Directory site. Site membership is determined by comparing the local IP address with information found in DNS. The Active Directory Topology service also
queries Active Directory, by default every 15 minutes, to retrieve a list of Domain Controllers and Global Catalog Server in the Active Directory site. This information is written to the Application Eventlog:
http://www.msexchange.org/articles-tutorials/exchange-server-2010/planning-architecture/smtp-routing-exchange-2010-part3.html
it seems what your stated is the site membership of the sender , but what I want to know is the site membership of the recipient.
Please click the Mark as Answer button if a post solves your problem! -
How to know the port number to which the server process is listening
I have created oracle 10g Release 1 database(orcl) in Windows Xp Professional edition through DBCA . I also created one more database(sample) manually .
The ORCL server process listens to port no 1521 and
SAMPLE server process listens to port no 1522
Once I start the OracleServiceORCL (Service for orcl) from services.msc and check the listener status it displays
Service "orcl" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
But when I start OracleServiceSAMPLE (Service for sample) from services.exe and check the listener status there is no change . Only when i start the instance the dynamic registration takes place with port no 1521 .
There is no entry for listener parameter in init.ora file . My question is how is the service ORCL able to get itself registered with the listener even before the instance is up ?
And how can i know which port no is linked with which server process?
Also if we provide a different port number(other than 1521 say 1522) in tnsnames.ora for a service and consider the listener is listening to both 1521 and 1522 . Now consider that port number 1521 is free . In this case to which port number will the service be listening to ?
The listener file looks like this
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = D:\oracle\product\10.1.0\Db_2)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = irobo)(PORT = 1521))
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = irobo)(PORT = 1522))
The tnsnames file has the following entry
ORCL =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = irobo)(PORT = 1522))
(CONNECT_DATA =
(SERVICE_NAME = ORCL)
SAMPLE =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = irobo)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = ORCL)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
)Service "orcl" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...[coe]
The status tells you the instance is up. Starting the service often means the instance gets started also, but whatever "often" means, "READY" means "The instance is up, running and taking callers".
Your statement that "ORCL [is] able to get itself registered with the listener even before the instance is up" is therefore factually incorrect: you started the service, that started the instance. The instance is up and running. Instances that aren't running don't exist. Things which don't exist don't register themselves. Things which HAVE registered themselves therefore do exist.. and if they say they are "ready", it means they are completely, 100% up and running and behaving quite normally.
I have not set LOCAL_LISTENER initialization parameter.How is this happening ?
You only need to set LOCAL_LISTENER if (a) you're not using TCP/IP, (b) you're not using port 1521. Otherwise, PMON is hard-coded to register itself with listeners running on port 1521 and using TCP/IP and you don't need to set LOCAL_LISTENER to achieve that.
Server Processes do not listen. Listeners do (there's a clue in their name). Listeners receive a call to connect to an instance, they spawn a server process to handle your call, and then they connect you to that server process (or send a message back to you telling you how to contact the server process). Each server process of course receives communications from its dedicated client on a specific port (usually in the 50000+ range), and that port is chosen randomly by the listener when it's spawning it. It's a bit blurry and vague to call that server process port a port on which server processes "listen", however.
If you're talking dedicated server, each client causes one new server process to be spawned, and there is a one-to-one correspondence between server processes and the port that server process happens to accept client communications on.
If you're going to ask a listener to do listening duty on multiple ports, I'd first question your need to do that and I'd then point out that unless your client tnsnames.ora knows to talk on the second or subsequent port numbers, the listener is never actually going to make use of that second port.
In either case, the port the listener listens on has nothing whatsoever to do with the port your client-to-server-process communication ends up taking place on. -
How to know Number of the Row which is selected in Advanced table
Hi All
I have a requirement where in an advanced table, when user clicks on copy icon against a row..a new row is created with copied values of the row against which copy action is performed.My issue is: assume in table i have got 5 rows..when user clicks on copy..my copied row gets created in the end..but i want tht row to be created directly under the row against which copy action is performed.I think somehow if i am able to know the position number of the row against which copy action is performed..i should be able to achieve it...can you please help me on this.
Thanks
Rajhi raj,
create a fire action to the copy image.
and then copy this method in to u r AM,
public void copy action(String s)
PwrPosViewShipmentsVOImpl sVO = getPwrPosViewShipmentsVO();
RowSetIterator rowsetiterator;
OADBTransaction oadbtransaction;
rowsetiterator = sVO.findRowSetIterator("ships");
int i;
int j;
if(rowsetiterator == null)
rowsetiterator = sVO.createRowSetIterator("ships");
oadbtransaction = getOADBTransaction();
rowsetiterator.reset();
i = 0;
if(!sVO.isPreparedForExecution())
rowsetiterator.setRowValidation(false);
String s1;
PwrPosViewShipmentsVORowImpl sVORowImpl1;
PwrPosViewShipmentsVORowImpl sVORowImpl=null;
do
if(!rowsetiterator.hasNext() || i >= sVO.getFetchedRowCount())
break;
i++;
sVORowImpl = (PwrPosViewShipmentsVORowImpl)rowsetiterator.next();
s1 = copyServerUtil.replaceNull(sVORowImpl.getAttribute("view attribute of the referenced column"));
} while(!s.equals(s1));
j = sVO.getRangeIndexOf(sVORowImpl);
sVORowImpl1 = (PwrPosViewShipmentsVORowImpl)rowsetiterator.createRow();
sVO.insertRowAtRangeIndex(j + 1, sVORowImpl1);
rowsetiterator.closeRowSetIterator();
* create a new class file under the server folder and paste the below into that. and then import that class file into u r AM. and then try to run as a whole. u will get ur required work.
public static final String replaceNull(Object obj)
if(obj == null || obj.equals("null"))
return "";
} else
return obj.toString();
} -
How to know querry level fields from which tables in the source system
Hi Experts,
let's say we've two fields in the querry e.g: Actual GI Quantity, Actual Value of GI
This fields from PP Querris level how would i know from which table we're getting data is there any easy process to find out please drop your suggestions..
Next doubt is when generate querry e.g. PM Module we don't know exatly what're the available tables & fields technical names but in my currently project using SAP Delivered Infocubes & Querries at the moment & generating querries but when we test in the Portal it's shows some fields '0', X. I've to check in source system weather it's having any values or not.
Can anybody drops your valuable words
Cheers
SureshHi all,
I'm a colleague of Maarten, and I think maybe we didn't explain well enough what we want. So let me try to elaborate:
We want to obtain the reference (within the SOAP-Body of the XI-message) to the attachment which contains the main payload (at least, in XI itself). This reference seems to have gone missing, once our adapter module (after having gone through XI) is entered (and, by the way, before we enter the SOAP-receiver-adapter).
The JAVA-representation of the XI-message seems to hide the fact that in XI itself, the main payload is an attachment, referenced from within the SOAP-Body.
Nevertheless, we would like to obtain/retain(?) that reference, in order to put it in our own to-be-created-additional-attachment, which would go (via the PayloadSwapBean-module of SAP) into the SOAP-body of the final SOAP-call, and should then reference the 'new attachment' (which was (in XI itself) the main payload).
So, I think both answers (up to now) don't help us much (however: thanks for your reaction anyway of course).
So, maybe someone has another idea?
Regards, Fred -
Reg: How to know name of server in which ejb is deployed
Hello:
Can anyone tell me what the best way to know the name of the server in which
ejb is deployed inside bean class.
Thanks,
VijayBut if i remember using java.net inside is a violation of spec.. and whats
the reason u want to know ant the network level things inside a EJB..
Amar
"Arjuna Chala" <[email protected]> wrote in message
news:3c644718$[email protected]..
if you want to know the system name then the call
System.out.println(java.net.InetAddress.getLocalHost().getHostName())should
work.
"VijayKumar" <[email protected]> wrote in message
news:3c643a2c$[email protected]..
Hello:
Can anyone tell me what the best way to know the name of the server
in
which
ejb is deployed inside bean class.
Thanks,
Vijay -
Re: How to know name of server in which ejb is deployed
Hello:
My current configuration of my project is we have
one Adminitration Server
four Managed Servers
All the servers are running on LocalHost
Now suppose I deploy my ejb in say ManagedServer 1
Now inside my ejb code I want to know on which managed server it is deployed.
Is there any way to know this.
My concoren is if the same ejb is deployed in Managed server 2
then query inside ejb to know managed server name should return managed server
2.
Thanks,
VijayI didnt understand what did u mean by all the servers are running on
Localhost u mean on the same physical machine?
May be u can get the name of the Managed Server using MBeans i mean JMX
....But I dont know exact way or using the API's to get the Managed Server..
Check the Weblogic JMx documentation...
But before this my most clear question will be what r u trying to achieve by
getting the name of the MAnaged Server....I meant for what purpose u want to
get the name of the server it has deployed?
Amar
"VijayKumar" <[email protected]> wrote in message
news:[email protected]..
>
Hello:
My current configuration of my project is we have
one Adminitration Server
four Managed Servers
All the servers are running on LocalHost
Now suppose I deploy my ejb in say ManagedServer 1
Now inside my ejb code I want to know on which managed server it isdeployed.
Is there any way to know this.
My concoren is if the same ejb is deployed in Managed server 2
then query inside ejb to know managed server name should return managedserver
2.
Thanks,
Vijay -
How to know which sub process(function) transaction codes belong to.
Greetings all,
I would like to know transaction codes belong to which sub process on SAP system.
For example, MD04 belongs to 'MQ-MRP-R/3-MRP', SE38 belongs to 'IT-PRO-R/3-Programming'..something like that.
Is there any way to check the definition on the system instead of just guessing by the function?
Thank you very much in advance.
Best regards,
Miki KomatsuHi,
As per your query you create profile as per your requirment like PP,MM,FI,CO,SD etc and assign complete module. Here you will find all the related t-code which is belong to specific module.
Anil -
How to know which master data objects need to activated in R3
SALES OVERVIEW CUBE -0SD_C03
How to know which master data objects need to activated from delivery version to active version in R/3 for a particular standard cube like 0SD_C03.
its very urgent please advise.
R/3 in RSA5
Sales Master Data
0ACCNT_ASGN_TEXT Account assignment group for this customer
0ACCNT_GRP_TEXT Customer account group
0BILBLK_DL_TEXT Locked
0BILBLK_ITM_TEXT Billing block for item
0BILL_BLOCK_TEXT Billing block in SD document
0BILL_CAT_TEXT Billing Category
0BILL_RELEV_TEXT Relevant for Billing
0BILL_RULE_TEXT Billing rule
0BILL_TYPE_TEXT Billing Type
0CONSUMER_ATTR Consumer
0CONSUMER_LKLS_HIER Consumer
0CONSUMER_TEXT Consumer
0CUST_CLASS_TEXT Customer Classification
0CUST_GROUP_TEXT Customer Group
0CUST_GRP1_TEXT Customer Group 1
0CUST_GRP2_TEXT Customer Group 2
0CUST_GRP3_TEXT Customer Group 3
0CUST_GRP4_TEXT Customer Group 4
0CUST_GRP5_TEXT Customer Group 5
0DEALTYPE_TEXT Sales Deal Type
0DEL_BLOCK_TEXT Delivery block (document header)
0DEL_TYPE_TEXT Delivery Type
0DISTR_CHAN_TEXT Distribution Channel
0DIVISION_TEXT Division
0DLV_BLOCK_TEXT Schedule line blocked for delivery
0DOC_CATEG_TEXT SD Document Category
0DOC_TYPE_TEXT Sales Document Type
0INCOTERMS_TEXT Incoterms (Part 1)
0INDUSTRY_TEXT Industry keys
0IND_CODE_3_TEXT Industry code 3
0IND_CODE_4_TEXT Industry code 4
0IND_CODE_5_TEXT Industry code 5
0IND_CODE_TEXT Industry code
0ITEM_CATEG_TEXT Sales document item category
0ITM_TYPE_TEXT FS item type
0KHERK_TEXT Condition Origin
0MATL_GRP_1_TEXT Material Group1
0MATL_GRP_2_TEXT Material Group 2
0MATL_GRP_3_TEXT Material Group 3
0MATL_GRP_4_TEXT Material Group 4
0MATL_GRP_5_TEXT Material Group 5
0MATL_TYPE_TEXT Material Type
0MAT_STGRP_TEXT Material statistics group
0NIELSEN_ID_TEXT Nielsen ID
0ORD_REASON_TEXT Order reason (reason for the business transaction)
0PICK_INDC_TEXT Indicator for picking control
0PRODCAT_TEXT Product Catalog Number
0PROD_HIER_TEXT Product Hierarchy
0PROMOTION_ATTR Promotion
0PROMOTION_TEXT Promotion
0PROMOTYPE_TEXT Promotion Type
0PROV_GROUP_TEXT Commission Group
0REASON_REJ_TEXT Reason for rejection of quotations and sales orders
0REBATE_GRP_TEXT Volume rebate group
0RECIPCNTRY_TEXT Destination country
0ROUTE_TEXT Route
0SALESDEAL_ATTR Sales deal
0SALESDEAL_TEXT Sales deal
0SALESORG_ATTR Sales organization
0SALESORG_TEXT Sales Organization
0SALES_DIST_TEXT Sales district
0SALES_GRP_TEXT Sales Group
0SALES_OFF_TEXT Sales Office
0SCHD_CATEG_TEXT Schedule line category
0SHIP_POINT_TEXT Shipping point/receiving point
In BW
Base Unit of Measure 0BASE_UOM
Bill-to party 0BILLTOPRTY
Calendar Day 0CALDAY
Calendar Year/Month 0CALMONTH
Calendar Year/Week 0CALWEEK
Change Run ID 0CHNGID
Company code 0COMP_CODE
Cost in statistics currency 0COST_VAL_S
Credit/debit posting (C/D) 0DEB_CRED
Distribution Channel 0DISTR_CHAN
Division 0DIVISION
Number of documents 0DOCUMENTS
Sales Document Category 0DOC_CATEG
Document category /Quotation/Order/Delivery/Invoice 0DOC_CLASS
Number of Document Items 0DOC_ITEMS
Fiscal year / period
Fiscal year variant 0FISCVARNT
Gross weight in kilograms 0GR_WT_KG
Number of Employees 0HDCNT_LAST
Material 0MATERIAL
Net value in statistics currency 0NET_VAL_S
Net weight in kilograms 0NT_WT_KG
Open orders quantity in base unit of measure 0OPORDQTYBM
Net value of open orders in statistics currency 0OPORDVALSC
Payer 0PAYER
Plant 0PLANT
Quantity in base units of measure 0QUANT_B
Record type 0RECORDTP
Request ID 0REQUID
Sales Employee 0SALESEMPLY
Sales Organization 0SALESORG
Sales group 0SALES_GRP
Sales Office 0SALES_OFF
Shipping point 0SHIP_POINT
Ship-To Party 0SHIP_TO
Sold-to party 0SOLD_TO
Statistics Currency 0STAT_CURR
In R3 RSA5 we have all the Master data data sources as mentioned above, and BW also. How to find the related Master data Infosource in R/3 Master data Data sources.
Thanks in advance,
Bhima.
Message was edited by: Bhima Chandra Sekhar GuntlaHi,
<i>How to know which master data objects need to activated from delivery version to active version in R/3 for a particular standard cube like 0SD_C03.</i>
I think, you are looking for master data sources(text,attributes,hier).Am i right?
If so, This cube has almost all SD master data characterstics. So you can activate all the all master data datasources of SD in r/3 (SD-IO).
Any way you requirement does not stop only by using this cube . You will activate all other cubes in SD also. So if you want to activate only needed master data datasources when you are activating a cube, the job becomes senseless. There is no problem(wrong) in activating all master data available under that application , even though you want to activate only one cube.
With rgds,
Anil Kumar Sharma .P -
How to know which hard drive contains the OS in Hp Pavilion dv7-4069wm? Upgrading.
I'm thinking about upgrading one of my hard drives (320GB ea) in my HP Pavilion dv7-4069wm laptop for more storage. I would like to keep the drive that contains the OS to avoid the hassle of making a copy, but I'm not sure which one that is. I haven't replaced a hard drive before, let alone a dual drive. I recently added more RAM and noticed both hard drives looked the same. Can anyone tell me how to know the difference? .
This question was solved.
View Solution.Hi,
The primary HDD with the operating system is shown on the diagram on Page 49 of your Maintenance & Service Guide.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
How to know which condition amount of PO will be added to invenotry
Hi,
I am making a report of material moving average price vs last Po price aginst which GR is made so I want to know how to know that from the purchase order all conditions which condition amount will be added to inventory like in case of import PO along with material cost octri and fright conditioon which are added as delivery cost amount of those conditions are added to invenotry and excise duty which is also delivery cost are updated in cenvat, so how to know from all condition which amount will be added to invenotry.
I dont want to take amoun which is updated at the time of GR.
regards,
zafarHi,
Thanks for your reply, in case of FI condition in OBQ3 if any accout key is assign there we can check this in OBCN from there it is easy to understand whethere it is dedcuctible or non deductable but in MM i am not getting details whethere the condition is deductable or non deductable
FRB1 delivery cost condition account key Z04 is assign the amount of this codnition is added to the materila account
JCVD delivery cost condition account key is Z07 the amount of this condition is not added to the material now in customizing of those account key Z04 and Z07 in Define Transaction/Event Keys there is no setting for this then how to know whether the amount of particular condition will be added to inventory or not.
regards,
zafar -
How to know which interfaces are going to which switch?
How to know which interfaces are going to which switch ?
I know that cdp will show this information. But CDP will not show info about the devices connected to my device and whose link between is administratively down.
Regards,
ChanduI don't want to the end devices location.
For example, i have a switch that connect to multiple switches few using etherchannels and few using stand-along ports.
So assume that one of the link whether it may be entire port-channel or a stand alone link that connects to another switch has been shut down manually by some x person...
Then how can i know that which interfaces are connecting to that switch. In this case i think CDP will not help because it will hold the information of ports that are up.
Regards,
Chandu -
How to know which stock type updated within movement type
Expert,
I need to know which stock type updated within each movement type.
I'm using two different system (SAP and Oracle) which is in each system updating stock. So i need to do stock calculation manually from that two systems.
I'm planning to imported material document data (from MKPF & MSEG) to Oracle and then combine the stock calculation.
And then i'm facing this :
Ilustration :
MIGO transaction - Goods Receipt PO - Stock Type Unrest
in MSEG field BWART : 101, SHKZG : S, INSMK : blank --> no problem
MIGO transaction - Goods Receipt PO - change Stock Type to Quality Inspection
in MSEG field BWART : 101, SHKZG : S, INSMK : 2 --> no problem
MIGO transaction - Transfer Posting - movement type 322 (reversal QI to Unrest.)
in MSEG field BWART : 322, SHKZG : S, INSMK : blank --> problem
in MSEG field BWART : 322, SHKZG : H, INSMK : blank --> problem
I have a problem that in MKPF & MSEG there is no indicator which stock type updated within movement type (BWART) 322.
How to know that first row will be updating stock QI and second row will be updating stock Unrest.??
I've already checked to OMJJ, SM30-V_156SC_VC, table T156... and still having no clue.
Or is it just a 'hardcode' ? And i need to do 'hardcode' too in Oracle system?
Thank you so much.The stock type indicator doesn't update for the movement type 322 in table MSEG.
At the time of transferring, you do not have to enter the stock type for movement type 322.
I can give you one clue, check can it fulfill your requirement.
You have two line items for movement type 322 in MSEG table, There are a field XAUTO will be updated as X for credit entry.
You can assume, the line item (without value for XAUTO) is for less from QI stock and the line item (with value X for XAUTO) is for add to unrestricted stock. -
How to know the standard MVT which the customized MVT is copy from ?
Hi, all:
please help me
I created a new MVT, how do I know the original standard MVT which I copy from?
where I can get the infomation?
Best Regard!
Thanks!
Shafiat.GHello,
When ever you Create new Mvttype you should craete with 9XX or Zzz or yyy, so that you can identity what is new Mvt type , thats what SAP says, we have to fllow with that
Maybe you are looking for
-
I would like to access the one that I no longer have a functioning email address for.
-
Hi friends, We have the Requirement of taking customer data from Legacy to ECC through PI. The Client has 167 fields in his customer database . But ECC needs Only 25-30 fields . BI needs all fields. So my PI consultant has create on
-
ITunes lost ... how to sync iPhone data back to blank iTunes ..
Hello Everyone, Previous iTunes was lost and now have formatted and reinstalled Windows7 x64. iPhone (10.5.1) is currently backed up, via the new iTunes, to iCloud. And to the new computer as well. No other devices or computers involved. How do I
-
Reports 9i Jdbc Query dialog box
Hi, Is it possible to base a report on a pl/sql stored procedure in Reports builder 9i environment using with jdbcpds.If possiblePlease provide step by step details and how we can call that particular procedure in JDBC query dailog box. Please provid
-
I am unable to upload documents.