How to know STO settings in customising

Hello,
i have one dout,
i have one STO i,e plant to plant in purchase order history , i saw delivery and GI document(641 mov type)
how to know that is this two step procedure by SPRO settings
how we come to know by settings, is these plants for two step procedure or one step procedure.
please guide me , by seeing the customising settings we may know the what should be happening in these plants?
regards
sapman

http://www.sap-basis-abap.com/mm/configuring-the-stock-transport-order.htm
http://www.sap-img.com/sap-sd/configure-intercompany-stock-transport-order.htm
Regs
Ravi

Similar Messages

How to know my ipad is 4...y it shows only 13.6 gb in usage when i check in settings....my ipad is 16gb

My Ipad has retina/wifi/cellular/16gb...but how to know its ipad4...because no were i see ipad4 (ipad box/website)...i agree it has lightning to usb but not mentioned on particulars...and also no 16gb is showed in usage when i checked in settings....how do come out of this ?

If it has the Lightning port, it is an iPad 4. iPad 3rd gen and all below came with the 30-pin connector. If you want, post the model number and we will verify what it is exactly.
Identify your iPad:
http://support.apple.com/kb/HT5452

How do i connect my macbook pro to another screen (a fujitsu siemens) i got the cable for it but i want to know the settings so i transfer desc to the fujitsu screen.

How do i connect my macbook pro to another screen (a fujitsu siemens) i got the cable for it but i want to know the settings so i transfer desc to the fujitsu screen.

Welcome to Apple Support Communities
If you have the cable, just connect it to both and the desktop will show up on the external display. Then, you can select different modes, changing arrangement in System Preferences > Displays > Arrangement, or using shortcuts > http://support.apple.com/kb/ht5019

Does anyone know how to change the settings for siri as all he keeps saying to me is he can only look up businesses in the u.s

my siri seems to be a bit confused as he thinks im in america but im in northern ireland is ther anyone who knows how to change the settings as i cant find them alsao he doesnt understand a word im saying

To use another iCloud backup, you have to erase all content and settings or restore it. Either gets you to the backup/setup page.
http://support.apple.com/kb/HT1766

When closing and reopening, my tabs aren't restoring like the once did. My history is only keeping one day. Need to know how to change these settings.

When closing and reopening Firefox, my tabs aren't restoring like they once did. I used to have all my tabs restore each time I opened Firefox. Now it starts with one fresh new tab and all my others are lost. I do a lot of research so this is important.
My history is only displaying one day even though I have never changed my settings even after I updated it last year.
Need to know how to restore these settings.
***OH! special note: I can't use the recently closed tabs or recently closed windows because its a grayed out option****

Are you using cleanup software like CCleaner?
If you use [[Clear Recent History]] to clear the 'Browsing History' when you close Firefox then restoring tabs from the last session ("Save & Quit" or "Show my windows and tabs from last time") doesn't work.
* http://kb.mozillazine.org/Session_Restore
There are other things that need attention:
Your above posted system details show outdated plugin(s) with known security and stability risks that you should update.
*Java Plug-in 1.6.0_05 for Netscape Navigator (DLL Helper)
Update the [[Java]] plugin to the latest version.
*http://www.oracle.com/technetwork/java/javase/downloads/index.html (Java Platform: Download JRE)

How to transfer printer settings from one Mac to another (both OSX)?

Hello, I have not found a detailed description on how to transfer printer settings from one Mac to another.
My issue is that I have a Mac G5 with 3 different settings saved as "presets" for the same printer. This works great, since the posters I print (on the large format printer) need different margins and different paper at times.
This G5 is basically retired and only used for printing. G5 has OSX 10.3.9
I have a MacPro as its replacement (OSX 10.4.11).
The MacPro has all my apps and other settings setup to my liking.
I found several links via Google saying copy this folder or directory, but I am not sure I did it correctly. I don't see the "presets".
I tried launching the Migration Assistant (I hope that's the correct name), but was concerned the settings on the new MacPro would be overwritten with ALL the old stuff on the older G5. I did not start the transfer process because of this.
If someone would list the steps needed to accomplish the transfer of printer settings or advise if this is possible, then I would be very grateful! The previous user of the G5 I am using was a "Genius" and I don't know how he created these "preset" choices.
Thanks!

Hi SCChelpdesk, and a warm welcome to the forums!
I found several links via Google saying copy this folder or directory, but I am not sure I did it correctly. I don't see the "presets".
This is the File that holds that info on Tiger, not certain on Panther...
/Users/YourUserName/Library/Preferences/com.apple.print.custompresets.plist
After moving, you very well might have to change the Owner's Permissions within Get Info window, then log out/in.
I tried launching the Migration Assistant (I hope that's the correct name), but was concerned the settings on the new MacPro would be overwritten with ALL the old stuff on the older G5. I did not start the transfer process because of this.
MA would transfer the info, but/and, if the user that had that info had the same Shortname as on the new one, it'll demand you give it a new Shortname to use... but then those settings would be transferred to that new user on the new machine. I think the 1st one will work though.
The previous user of the G5 I am using was a "Genius" and I don't know how he created these "preset" choices.
We can go through that way if you like... not all that hard.

Using Firefox, I used to be able to open a document on a website and look at it without downloading. Now, I must download a document in order to view it. How can I change settings so that I can open documents without saving them?

Using Firefox, I used to be able to open a document on a website, such as a bank statement, and view it without downloading. Now, I must download and save a document before I can view it. How can I change settings so that I can open documents without saving them first?

Do you know what kind of docs they are? Did you upgrade/Update Firefox lately?
https://addons.mozilla.org/en-US/firefox/addon/pdf-download/
http://kb2.adobe.com/cps/333/333563.html
https://addons.mozilla.org/en-US/firefox/addon/open-it-online/

How to Restore Factory Settings on a Mac?

How to Restore Factory Settings on a Mac OS X 10.6.8?
I have been told you can do this without the Installation CD. I also do not remember the installation CD when i got the laptop. If it's possible then please someone let me know! if not then how can i get a new CD to do this?
my computer keeps freezing on me at random times, and i have tried taking the laptop to my college tech support and also Best Buy and they said they can't do anything and that i need to try resetting the mac.

You may not remember the installer disks but they came in the box. Your profile shows you are running 10.6.6 Snow Leopard. To restore back to factory settings you need those disks. That said to go that route may be unnecessry. Stay away from Best Buy tech people. They know nothing. Without the disks you do a repair disk to see if that helps:
Start up your computer in single-user mode to reach the command line.
Note: If necessary, perform a forced restart as described in the Emergency Troubleshooting Handbook that came with your computer. On desktop computers, you can do this by pressing the reset/interrupt button (if there is one) or holding down the power button for several seconds. On portable computers, simultaneously press the Command-Control-power keys. If your portable computer doesn't restart with this method, you may need to reset the Power Manager.
At the command-line prompt type:
/sbin/fsck -fy
Press Return. fsck will go through five "phases" and then return information about your disk's use and fragmentation. Once it finishes, it'll display this message if no issue is found:
** The volume (name_of_volume) appears to be OKIf fsck found issues and has altered, repaired, or fixed anything, it will display this message:
***** FILE SYSTEM WAS MODIFIED *****
Important: If this message appears, repeat the fsck command you typed in step 2 until fsck tells you that your volume appears to be OK (first-pass repairs may uncover additional issues, so this is a normal thing to do).
When fsck reports that your volume is OK, type reboot at the prompt and then press Return.
Your computer should start up normally and allow you to log in.

How to know if system is running in 40W low performance mode ?

I experienced the same problem than described in this topic: lower performance with charger than with battery!
(But I had set everything on Maximum Performance both in BIOS and in Windows's Power settings, so I think everything was done on software-side).
How to know if the system runs with lower performance (is it a 40W max mode? btw how did you know it is called "40W mode" ? I saw this figure nowhere else than in the mentioned-above topic) , except using a soft to do some benchmarking? Is there a place in BIOS (I didn't find!) ?

Benoit34 wrote:
Hi,
I have a mac book pro & a friend has an Imac, how to know if we are both running Leopard under 32 or 64 bit.
I see that Leopard support 64, but didn't find if it was actually running in 64.
Regards,
Benoit
Welcome to Apple Discussions:
if your computer is 64-bit, Leopard is running in the 64-bit mode. There are a few caveats about this but basically this is the case.

HT5624 How I Know My imei no.

How i know my imei no.

Settings-->General-->About. You'll see the IMEI listed towards the bottom.

How i know my iphone is orignal

how i know my iphone is orignal

Type in the serial number below (Settings > General > About > Serial number)
https://selfsolve.apple.com/agreementWarrantyDynamic.do

How to know my previous version of Mozilla Firefox I used

Mozilla Firefox automatically updated to version 32. Previously I used older version. I want to uninstall this version and again wanted to install older version. But I dont know which version I used. I never checked it.
So please tell me how to know previous version I used
The main problem is in older version I can pause and resume any downloads. But it is not possible in this new version.

Hello,
'''Try Firefox Safe Mode''' to see if you can pause downloads. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings, disables most add-ons (extensions and themes).
If Firefox is open, you can restart in Firefox Safe Mode from the Help menu:
*In Firefox 29.0 and above, click the menu button [[Image:New Fx Menu]], click Help [[Image:Help-29]] and select ''Restart with Add-ons Disabled''.
*In previous Firefox versions, click on the Firefox button at the top left of the Firefox window and click on ''Help'' (or click on ''Help'' in the Menu bar, if you don't have a Firefox button) then click on ''Restart with Add-ons Disabled''.
If Firefox is not running, you can start Firefox in Safe Mode as follows:
* On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac: Hold the '''option''' key while starting Firefox.
* On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
When the Firefox Safe Mode window appears, select "Start in Safe Mode".<br>
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
When you figure out what's causing your issues, please let us know. It might help others with the same problem.

How to know that iphone 4 is locked??, How to know that iphone 4 is locked??

How to know that iphone is locked or unlocked ?
In my case when I put the sim card of SK telecom the iphone display the carrier of SK telecom and when I replace the sim card with KT then it displays the carrier with KT telecom in the settings.
Does that mean my iphone is unlocked and it is carrier free?
In my case these both sim are expired so they dont show any networks.
They just display "Searching " and then "No service" but in the carrier section (settings) it displays the corresponding telecoms and the phone numbers.
So is it unlocked phone.
If it is unlocked phone then I was thinking o use a mini sim card(SK telecom) in it which is not expired by cutting it into micro sim card .Will it work ?
Help me !!!

dipencha wrote:
How to know that iphone is locked or unlocked ?
The ONLY way to know for sure whether your phone is officially unlocked or not is to have purchased your phone from an official source that sells officially unlocked iPhones. If you did so, you have nothing to worry about. If you did not purchase from an official source, well...you take your chances and hope for the best. Many phones, from non-official sources, advertised as "factory unlocked", are in fact hacked to unlock them.

How to know date format of client in webservices

I have made a webservice which takes Date from the client. But these clients can have there own regional settings like DD/MM/YYYY or MM/DD/YYYY or YYYY/MM/DD.
It would be helpful if someone can tell me how to know the date format of the client in server for a webservice
regards,
Saurabh

If a service recieves messages with values that are typed in WSDL as wxs:dateTime or a restriction thereof, then the data is fixed in its format to ISO 8601, and has nothing to do with the localisation settings of the client machine.
The question 'does typing a value as xsd:dateTime in WSDL fix the format' and the question 'how can a server know the regional settings of a client' are not the same question. AFAIK, the majority of public web services do not use WSDL nor WXS.
Pete

How to know date format of client

I have made a webservice which takes Date from the client. But these clients can have there own regional settings like DD/MM/YYYY or MM/DD/YYYY or YYYY/MM/DD.
It would be helpful if someone can tell me how to know the date format of the client in server for a webservice
regards,
Saurabh

If a service recieves messages with values that are typed in WSDL as wxs:dateTime or a restriction thereof, then the data is fixed in its format to ISO 8601, and has nothing to do with the localisation settings of the client machine.
The question 'does typing a value as xsd:dateTime in WSDL fix the format' and the question 'how can a server know the regional settings of a client' are not the same question. AFAIK, the majority of public web services do not use WSDL nor WXS.
Pete

How to know STO settings in customising

Similar Messages

Maybe you are looking for