How to know the capacity of Onboard memory of 5142 digitizer or any other digitizer

We have purchased couple of digitizers and AWGs for a particular project for our customer, my customer is asking us to show the onboard memory capacity. How can i show to them the capacity of the onboard memory of those card? We have purchased (5142,5622,5451,5442)

Hi Tejeswar,
   I think you already figured this out, but just incase not, you could see the on board memory details in the hardware documentation(Start >> All Programs >> National Instruments >>NI-SCOPE>>Documentation>>Specification).

Similar Messages

  • With a contract number, how to know the total PO release value against it?

    Usually one contract corresponds to multiple PO records, now we know the contract number, then how to know the total PO release value against this contract.  In other word, we would like to know the total release value of all the POs with the same contract number.  To just input the contract number in EKPO table? but then look for which field in this table to add these PO release values up?
    We will give you reward points!
    Thanks!

    hi Mohammad,
    By following your instruction, input the contract number 4800000112 into Document number field, then hit Enter, get the following (only copy two records here for example), but kind of a mess.  Could you let us know which one is the PO release value for this contract?
    Contract   Type Vendor     Name                                 PGp Agmt. date
      Item  Material           Short text                               Mat. group
      D I A Plnt SLoc                 Targ.qty. Un       Net price  Curr.   per Un
    4800000112 WK   2000012012 GULF INTERSTATE FIELD SERVICES       QBH 06/20/2006
    Agreement start06/20/2006 Agreement end 12/31/2007
    Tgt. val.        1,000,000.00  USD   Open          1,000,000.00 USD   100.00 %
      00001                    Inspection Svcs, Construction            R3VNI
      L   U                                  0  UL            0.00  USD       1 EA
      00002                    Chief Inspector                          R3VNI
      L   U                                  0  DAY         390.00  USD       1 DAY

  • On iTunes when i plug my iphone in, the bar at the bottom with contains the information about the capacity of my iphone, it has a bar called 'other' which has 4GB. I don't know what is taking up that space or how to get rid of it. please help :)

    On iTunes when i plug my iphone in, the bar at the bottom with contains the information about the capacity of my iphone, it has a bar called 'other' which has 4GB. I don't know what is taking up that space or how to get rid of it. please help

    You can reduce the size to normal, which is about 1GB, by restoring the phone.
    Backing Up, updating, and restoring your iPhone and iPod touch software
    The size of this part can increase when something goes wrong during a sync, or some files can't be read anymore by iTunes.

  • How to know the amount of ora 11g page-out  memory (sga and pga)?

    How to know the amount of oracle 11g page-out memory ( sga and pga) in the SunSolaris 10 Unix and Linux.
    I need to know how many oracle memory are being page-out ( all and for a one oracle server process).
    thanks

    You can monitor the paging with vmstat or sar commands.
    http://download.oracle.com/docs/cd/B28359_01/server.111/b32009/tuning.htm#sthref500
    You can also get the paging information on OEM home page if configured for your database.
    But I don't know if there exists a method with which one can find out how much memory per session/server process is getting paged out.

  • Is there a limit for the apps that i purchased or i can purchase as much i want? and how can i know the capacity it's taking? Thank you

    Is there a limit for the apps that i purchased or i can purchase as much i want? and how can i know the capacity it's taking? Thank you

    Yes you can buy whatever you want if your credit card is in good standing.
    Before you buy, read the size of the download in iTunes/App/iBook Store.
    Rule of thumb, you need to reserve about 10% of your total space.

  • How to know the memory

    Hi
    Following is the output of sh ver of cisco 2621 router. There is two place saying about the memory
    cisco 2621 (MPC860) processor (revision 0x600) with 53248K/12288K bytes of memory.
    another
    32K bytes of non-volatile configuration memory.
    what is the actual memory size? is it 64 or 32?
    Can i install an IOS which minimum requires 64Mb memory in this Router?
    #sh ver
    cisco 2621 (MPC860) processor (revision 0x600) with 53248K/12288K bytes of memor
    y.
    Processor board ID JAD05440L9D (3776779414)
    M860 processor: part number 0, mask 49
    Bridging software.
    X.25 software, Version 3.0.0.
    2 FastEthernet/IEEE 802.3 interface(s)
    32K bytes of non-volatile configuration memory.
    16384K bytes of processor board System flash (Read/Write)

    In addition to Andrew info..
    How to know the memory ?
    cisco 2621 (MPC860) processor (revision 0x600) with 53248K/12288K bytes of memory.
    when you get the above output from sh ver,
    simply add 53248k + 12288k and always devide by 1024.
    e.i
    53248k + 12288k / 1024 = 64
    64MB is your total memory in your router
    Rgds
    Jorge

  • How to know the progress of the Sync when I call PullAsync()

    Hi,
    I am developing a Windows 8.1 app, In that I am using offline data concept using Azure mobile services with JavaScript Backend.
    My questions is how can I show the status or progress of the Sync When I call PullAsync() method.... I want to show the number of records sync or how much percentage synced like that...
    private async void ButtonPull_Click(object sender, Windows.UI.Xaml.RoutedEventArgs e)
    await todoTable.PullAsync();
    //How to know the progress of sync
    await RefreshTodoItems();

    Hi Narendra,
    I suggest you to check this information for more details.
    PullAsync() call can either pull all items from the remote table, or just pull a subset of the items. Only pulling some items from the table is often advisable, as stuffing everything from the (potentially large) remote database table into the (restricted by
    the device memory) local table may have some bad performance implications. You can pass an OData-formatted query to select which items to pull from the server, or you can also use the (more friendly) Linq expressions to determine the query of items to be pulled.
    var localTable = client.GetSyncTable<TodoItem>();
    var query = localTable.Where(t => !t.Complete);
    await localTable.PullAsync(query);
    var localItems =
    await localTable
        .Select(i => i.Text)
        .ToListAsync();
    AddToDebug("Items from the server (in the local table): {0}",
    string.Join(", ",
    localItems));
    One important thing to notice regarding pull operations – if there are items in the pending synchronization queue, those items are first pushed over to the server, then the pull operation takes place. That prevents a scenario where an update is done to a
    local item, but a pull operation would overwrite the changes locally and potentially leave the data in an inconsistent state. That’s one the first synchronization rule: a pull triggers a push. In the example below, the insert operation for the “Buy milk” item
    will first be pushed to the server, then the items will be pulled into the local table.
    await client.SyncContext.InitializeAsync(store);
    AddToDebug("Initialized the sync context");
    var localTable = client.GetSyncTable<TodoItem>();
    var item =
    newTodoItem { Text =
    "Buy milk", Complete =
    false };
    await localTable.InsertAsync(item);
    var query = localTable.Where(t => !t.Complete);
    await localTable.PullAsync(query);
    var localItems =
    await localTable
        .Select(i => i.Text)
        .ToListAsync();
    AddToDebug("Items from the server (in the local table): {0}",
    string.Join(", ",
    localItems));
    for us to better understand both Push() and pullasync() feature is used while querying from the Database.
    http://blogs.msdn.com/b/azuremobile/archive/2014/04/07/deep-dive-on-the-offline-support-in-the-managed-client-sdk.aspx
    Girish Prajwal

  • Hello...please i wish to know the capacity of this version of macbook air "macintosh 10.7.4"

    Hello...please i wish to know the capacity of this version of macbook air "macintosh 10.7.4"?

    That's the total RAM in your system (Random Access Memory)
    The total storage capacity should be 128GB, 256GB or 512GB, the 59.81GB is what is available on your SSD drive. 

  • How to know the dynamic values for this :AND category_id_query IN (1, :3, )

    Hi Team,
    R12 Instance :
    Oracle Installed Base Agent User Responsibility --> Item Instances -->
    Item Instance: Item Instances > View : Item Instance : xxxxx> Contracts : Item Instance : xxxxx> Service Contract: xxxxx>
    In the above page there are two table regions.
    Notes.
    -------------------------------------Table Region---------------------------
    Attachments
    -------------------------------------Table Region---------------------------
    --the attachments are shown using the query from the fnd_lobs and fnd_docs etc...
    I want to know what are the document types are displayed in this page ?
    --We developed a custom program to attach the attachments to the  services contracts and the above seeded OAF page displays those ..as needed.
    But after recent changes..the Attachments--> table region is not showing the attachments.
    I have verified the query..and could not find any clue in that..
    but i need some help if you guys can provide..
    SELECT *
    FROM
    *(SELECT d.DOCUMENT_ID,*
    d.DATATYPE_ID,
    d.DATATYPE_NAME,
    d.DESCRIPTION,
    DECODE(d.FILE_NAME, NULL,
    *(SELECT message_text*
    FROM fnd_new_messages
    WHERE message_name = 'FND_UNDEFINED'
    AND application_id = 0
    AND language_code  = userenv('LANG')
    *), d.FILE_NAME)FileName,*
    d.MEDIA_ID,
    d.CATEGORY_ID,
    d.DM_NODE,
    d.DM_FOLDER_PATH,
    d.DM_TYPE,
    d.DM_DOCUMENT_ID,
    d.DM_VERSION_NUMBER,
    ad.ATTACHED_DOCUMENT_ID,
    ad.ENTITY_NAME,
    ad.PK1_VALUE,
    ad.PK2_VALUE,
    ad.PK3_VALUE,
    ad.PK4_VALUE,
    ad.PK5_VALUE,
    d.usage_type,
    d.security_type,
    d.security_id,
    ad.category_id attachment_catgeory_id,
    ad.status,
    d.storage_type,
    d.image_type,
    d.START_DATE_ACTIVE,
    d.END_DATE_ACTIVE,
    d.REQUEST_ID,
    d.PROGRAM_APPLICATION_ID,
    d.PROGRAM_ID,
    d.category_description,
    d.publish_flag,
    DECODE(ad.category_id, NULL, d.category_id, ad.category_id) category_id_query,
    d.URL,
    d.TITLE
    FROM FND_DOCUMENTS_VL d,
    FND_ATTACHED_DOCUMENTS ad
    WHERE d.DOCUMENT_ID = ad.DOCUMENT_ID
    *) QRSLT*
    WHERE ((entity_name    ='OKC_K_HEADERS_V'-- :1
    AND pk1_value          IN ( 600144,599046) --:2
    AND category_id_query IN (1, :3, :4, :5, :6, :7) )
    AND datatype_id       IN (6,2,1,5)
    AND (SECURITY_TYPE     =4
    OR PUBLISH_FLAG        ='Y')))
    --='000180931' -- 'ADP118'
    The above seeded query is the one which is used for table region to retrieve the data..
    how to know the dynamic values for this : AND category_id_query IN (1, :3, :4, :5, :6, :7) )
    --Sridhar                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

    Hi Patricia,
    is it working for restricted key figure and calculated key figure ??
    Note Number Fisc Period Opening Days
    1 1 2
    2 1 3
    3 1 0
    because I have other restriction, so I create two restricted key figure..
    RK1  with restriction :  Total Number of Note,
    RK2  with restriction :  Total Opening Days ,
    then I Created a calculated key figure, average opening days in a period
    CK1 = RK2 / RK1..
    in this case, I am not sure if it will work or not..
    for example, during RK2 calclation, it might be this   2+3 = 5, the line with 0 will be ignored..
    during RK1 calcualtion, it might be 1 + 1 + 1 = 3. ---> Not sure in this case, the line with opening days 0 will be calculated or not..
    could you please confirm..

  • How to know the balance and validity of internet data in iPad

    How to know the balance and validity of internet data in iPad?

    Sir I m using internet in ipad4 with airtel network
    They provide me 2gb data with the amount of 255 rupees
    And now I inserted the sim in my ipad4
    And start the surfing on safari n all
    And now I wanted to know how much data is balance.

  • How to know the class method behind an enterprise service

    Hi,
    SAP has provided enterprise services for Room booking in Real Estate module. They are even shipping the complete application for a nominal price. But the standard version is not suitable for our client requirement so they want to develop this application inhouse.
    Now my question is:  I know the enterprise services used in this application. How to know the implementing methods behind these enterprise services ?
    If possible suggest which approach will be a better option for the inhouse development.
    1. Webdynpro ABAP and use directly methods behind the enterprise services.
    2. Webdynpro ABAP and create client proxy class for the enterprise services.
    3. Webdynpro JAVA and use the enterprise services.
    4. Using visual composer modelling the application.
    Please suggest the best alternative.
    Best Regards,
    Aleem Mohiuddin.

    Hi
    They are even shipping the complete application for a nominal price. But the standard version is not suitable for our client requirement so they want to develop this application inhouse.
    I assume you are talking about xApps.
    How to know the implementing methods behind these enterprise services ?
    In sproxy transaction you can search service and then you can see class and method implemented behind that particular service.
    1. Webdynpro ABAP and use directly methods behind the enterprise services.
    In my opinion not recommended to bypass ES and use method behind it.
    2. Webdynpro ABAP and create client proxy class for the enterprise services.
    Not sure why you want to create proxy of ES.
    3. Webdynpro JAVA and use the enterprise services.
    4. Using visual composer modelling the application.
    You can use either Webdynpro (ABAP or Java) or VC to model your application which consume ES in backend. Both options are good, you can chose Java or ABAP flavor of dynpro based on skill available in team. VC is very effective in rapid modelling and can be used in protyping or in development of complete application.
    Regards,
    Gourav

  • How to know the error in the goods movement

    Hai gurus,
    a) while doing goods issue and goods receipt , if there is any
        error  in the goods movement how to know the same and correct it.
    Regards,
    sekar chand

    Hi,
    If You are doing GR and GI during order confirmation then you will find a tab for Display Error(Bell Ikon).At the time of any error you will find this icon highlighted.press it you will find details error description and proposed solution.
    Regards,
    Dhaval

  • How to know the PO  Created with RFQ or Not..??

    Hi MM Gurus,
    How to know the purchase order created with one quotation or not. because when i am trying to create PO with /ME21N through DOcumen Overview on. there is list of Quotation. i created PO with XYZ quotation. and after creation of PO i am trying to create another PO with another quotation but in that list still XYZ quotation is Displying. so how to knows once PO cretd with Quotation or not. . and I dont wanted to disply quotation once created Po.
    Thanks in Advance.
    N.A.Reddy

    Hi Pradeep. Thanks for the mail.
    the problem is ....with *quotation...*
    How to know the purchase order created with one quotation or not.
    because when i am trying to create PO with /ME21N through DOcumen Overview on. there is list of Quotation.
    I created PO with XYZ quotation. and after creation of PO i am trying to create another PO with another quotation but in that list still XYZ quotation is Displying.
    so how to knows once PO cretd with Quotation or not. .
    and I dont wanted to disply quotation once created Po.
    Thanks in Advance.
    N.A.Reddy

  • How to know the count of record in CR XI?

    Post Author: Liu ming
    CA Forum: Deployment
    Hi All,
    I create a report by CR XI release 2. The report is viewed in ASP.Net. So, I would like show a message when the report have no record. My question is how to know the count of record?
    Thanks.

    I was able to do this by using
    ora:countNodes('Receive_1_Read_InputVariable','BILL','/ns2:BILL/ns2:CMS1500')

  • HT204088 How to know the rest of money in a credit card and the total of purchase amount?

    How to know the rest of money in a credit card and the total of purchase amount?

    What do you mean 'the rest of money in a credit card' ? All you can see on your purchase history is what you've bought, you can't see how things were billed nor the total amount that you've spent in the store - you will need to sum your purchases yourself to see the total.

Maybe you are looking for

  • Accounting document missing for MIGO

    A migo document doesnu2019t have corresponding FI document. While selecting FI document option it says No subsequent document found in Accounting Message no. RW011 Diagnosis All documents generated in Financial Accounting for object type 'MKPF', Refe

  • How to use csv files in OWB

    Hi Experts I have one UNIX server and i my user is putting the csv files on windows machine. I want 1. If User put some new csv file in windows machine it should automatically reflect in UNIX machine. 2. If user enter some data in windows csv files t

  • Can I update the number of processes, cache etc per workshift via backend

    Hi everyone, after cloning from PROD to a TEST environment, i'd like to be able to reduce the number of concurrent processes and the cache size for the standard manager to a lower number. Most of my post cloning steps are automated through a script,

  • Problem in displaying selection options in report

    Hi Team, There is a report running in production. It has one select option for data element PROJ-PSPNR. But the requirement changes and the selection option should be for PROJ-PSPID instead. I started changing the code in development box and deleted

  • Change 8-bit binary image back to 8-bit grayscale

    Can some one help me please in NI vision how to convert the image back to grayscale after I did my thresholding by using 'IMAQ Local threshold' from a 8-bit grayscale to a binary image but the problem now I don't know how to convert it back. I need s