How to know the Cluster name for Hyperion Planning Application

Hi,
We have 2 Hyperion planning clusters in our Planning environment. As per new requirement, we need to make the copy the existing planning application.
We are not able to get the defined cluster information for existing planning application.
Please help on how can we find the cluster name for a Hyperion Planning application.
Quick help will be appreciated!!
Thank You.
Mohit Jain

Hi John,
Thanks for your quick response!!
We tried to run this command on Planning system command. but it did not return any record. We found that table "HSPSYS_APP_CLUSTER_DTL" does not have any record.
is there any other way, where we can check the planning cluster name.
Please help on this further.
Thank You.
Mohit Jain

Similar Messages

  • How to establish the ODBC connectivity for Hyperion Brio

    Hi Every One,
    Please some one let me know how to establish the ODBC connectivity for Hyperion Brio/ interactive reporting studio.?
    Thanks & Regards,
    Raj

    check out the manual
    http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/ir_user.pdf
    chapter 15
    Edited by: [email protected] on Feb 9, 2010 7:00 AM

  • How to know the table name of an InfoCub if we know cube technical name?

    How to know the table name of an ODS if we know the ODS technical name?
    Thanks
    Message was edited by: Kevin Smith

    hi kevin
    if the ODS is a standard ODS then you check the following way in SE16
    (for custom ODS objects)
    /BIC/A<ODS technical name>00 (Active Data Table)
    /BIC/A<ODS technical name>40  (Activation Queue)
    /BIC/B<10 digit number> (Change Log Table)
    (for SAP defined ODS Objects)
    /BI0/A<ODS technical name>00 (Active Data Table)
    /BI0/A<ODS technical name>40  (Activation Queue)
    /BI0/B<10 digit number> (Change Log Table)
    and for Transactional ODS Object you will have only the active data Table. So you need to check with /BIC/A<ODS technical name>00 for the custom ODS objects and /BI0/A<ODS technical name>00 for SAP defined ODS objects.
    hope this helps.
    regards
    vijaykumar

  • How to know the dynamic values for this :AND category_id_query IN (1, :3, )

    Hi Team,
    R12 Instance :
    Oracle Installed Base Agent User Responsibility --> Item Instances -->
    Item Instance: Item Instances > View : Item Instance : xxxxx> Contracts : Item Instance : xxxxx> Service Contract: xxxxx>
    In the above page there are two table regions.
    Notes.
    -------------------------------------Table Region---------------------------
    Attachments
    -------------------------------------Table Region---------------------------
    --the attachments are shown using the query from the fnd_lobs and fnd_docs etc...
    I want to know what are the document types are displayed in this page ?
    --We developed a custom program to attach the attachments to the  services contracts and the above seeded OAF page displays those ..as needed.
    But after recent changes..the Attachments--> table region is not showing the attachments.
    I have verified the query..and could not find any clue in that..
    but i need some help if you guys can provide..
    SELECT *
    FROM
    *(SELECT d.DOCUMENT_ID,*
    d.DATATYPE_ID,
    d.DATATYPE_NAME,
    d.DESCRIPTION,
    DECODE(d.FILE_NAME, NULL,
    *(SELECT message_text*
    FROM fnd_new_messages
    WHERE message_name = 'FND_UNDEFINED'
    AND application_id = 0
    AND language_code  = userenv('LANG')
    *), d.FILE_NAME)FileName,*
    d.MEDIA_ID,
    d.CATEGORY_ID,
    d.DM_NODE,
    d.DM_FOLDER_PATH,
    d.DM_TYPE,
    d.DM_DOCUMENT_ID,
    d.DM_VERSION_NUMBER,
    ad.ATTACHED_DOCUMENT_ID,
    ad.ENTITY_NAME,
    ad.PK1_VALUE,
    ad.PK2_VALUE,
    ad.PK3_VALUE,
    ad.PK4_VALUE,
    ad.PK5_VALUE,
    d.usage_type,
    d.security_type,
    d.security_id,
    ad.category_id attachment_catgeory_id,
    ad.status,
    d.storage_type,
    d.image_type,
    d.START_DATE_ACTIVE,
    d.END_DATE_ACTIVE,
    d.REQUEST_ID,
    d.PROGRAM_APPLICATION_ID,
    d.PROGRAM_ID,
    d.category_description,
    d.publish_flag,
    DECODE(ad.category_id, NULL, d.category_id, ad.category_id) category_id_query,
    d.URL,
    d.TITLE
    FROM FND_DOCUMENTS_VL d,
    FND_ATTACHED_DOCUMENTS ad
    WHERE d.DOCUMENT_ID = ad.DOCUMENT_ID
    *) QRSLT*
    WHERE ((entity_name    ='OKC_K_HEADERS_V'-- :1
    AND pk1_value          IN ( 600144,599046) --:2
    AND category_id_query IN (1, :3, :4, :5, :6, :7) )
    AND datatype_id       IN (6,2,1,5)
    AND (SECURITY_TYPE     =4
    OR PUBLISH_FLAG        ='Y')))
    --='000180931' -- 'ADP118'
    The above seeded query is the one which is used for table region to retrieve the data..
    how to know the dynamic values for this : AND category_id_query IN (1, :3, :4, :5, :6, :7) )
    --Sridhar                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

    Hi Patricia,
    is it working for restricted key figure and calculated key figure ??
    Note Number Fisc Period Opening Days
    1 1 2
    2 1 3
    3 1 0
    because I have other restriction, so I create two restricted key figure..
    RK1  with restriction :  Total Number of Note,
    RK2  with restriction :  Total Opening Days ,
    then I Created a calculated key figure, average opening days in a period
    CK1 = RK2 / RK1..
    in this case, I am not sure if it will work or not..
    for example, during RK2 calclation, it might be this   2+3 = 5, the line with 0 will be ignored..
    during RK1 calcualtion, it might be 1 + 1 + 1 = 3. ---> Not sure in this case, the line with opening days 0 will be calculated or not..
    could you please confirm..

  • How to get the owner name for the file in ftp using abap ?

    Hi folks ,
    How to get the owner name for the file in ftp using abap ? please help me very ugernt . I tried with all standard FTP commands
    but doest work out me . Helping in this regard highly appreciated ...
    Thanks and regards,
    Swarupa Vanarchi

    Hi
    dont you  have used the os user while calling the FTP_CONNECT FM?
    Hope you are not talking about the user executing the FTP program.
    Else If you are talking about the FTP file creator then its not related to abap as you can handle it by maintaining the user in file name itself.
    May be i am going too far with if and elses here as your question possesses no  clarity.
    Plz elaborate your requirement  before anybody can help.
    Regards
    sateesh

  • How to change the package name for a msg class

    Can anybody tell me how to change the package name for a message class.
    and how will it effect in the rerport?
    thanks in advance
    kp

    >>and how will it effect in the report?
    You wouldn't see any direct effect on the Report.. But if you transport the report to QA & leave the Message class in Dev, it might result in syntax issues & you will not be able to execute the report. Just ensure that both of them get transported to QA & you will be fine.
    ~Suresh

  • How to Add the title name for Graph in Excel

    Dear Friends
                      I am using LabVIEW 8.0.I need how to add the title name for chart in Excel.
    Jayavel
    Solved!
    Go to Solution.

    Do you have the Report Generation Toolkit? If so, the Excel Easy Graph VI has an input for that.
    If you don't have the toolkit then you will need to use ActiveX. Please do a search on how to use ActiveX (there are examples that ship with LabVIEW) to control Excel. There are also lots of example in the Excel thread. NOTE: DO NOT POST QUESTIONS IN THAT THREAD. 
    Ultimately you will need to look up the information in MSDN. 

  • How to know the technical name of psa

    hi BW gurus,
    I need to delete data from psa i need to increase the free space.  so how to know the technical name of psa.  and how to delete the data from psa.
    Thanks in advance

    Shahid,
    Agree with Tarun on this...
    Check the PSA technical name from the delete PSA option on the PSA screen of the AWB...the PSA name would be /bic/b000*...
    Shahid...also chek the table RSTSODS in SE11.
    U can find the PSA technical name in the field ODSNAME_TECH..
    Just enter the name of the PSA in the ODSNAME field..the PSA name would be
    your infosource followed by some extension.
    Deleting the data from the PSA:
    Shahid,
    this can be achieved via a program and also via the standard procedure of going to the PSA in the AWB and choosing the option delete the PSA data...
    Here select the requests which are older than any number of days or before any date..
    Hope this helps...
    Regs.
    Nick.
    Message was edited by:
            Nick

  • How to know the output type for particular tcode

    Hi
    how to know the output type for the VL10D & VAL TCODES.
    Can anybody help me out.
    Thanks and Regards
    Krishnarao

    Hi Krishna,
    GO to NACE and select your application and click on output types and in the next screen select your output type and and dbl click on Processing routines.
    Here you will come to know about which driver program is used for which smartform or Script.
    and for Program details you can refer table: REPOSRC
    Regards,
    Sachin

  • How to know the consumer_group belong to which plan

    Dear all,
    How to know the consumer_group belong to which plan? I found a consumer_group name TEST in table DBA_RSRC_CONSUMER_GROUPS
    , but I can not locate it belong to which Plan.

    Do you have enterprise manager db console configured, then its easy to drill to find that information through few clicks. Not sure what's the sql query to get it. if you find one then do post here.

  • How to know the column name using the index name for a particular table

    Hi All,
    I have small query regarding, I have index name and table name so by using this how can I know the column name associated with that index of that particular table specific to Oracle9i.
    Thanks
    Sudheer

    select *
    from user_ind_columns -- or all_ind_columns
    where table_name = UPPER('&table_name')
    and index_name = UPPER('&index_name');
    Regards
    Arun
    Gurgaon

  • How to setup the cluster environment for BPM using weblogic

    want to setup the cluster environment for BPM using weblogic....
    i have installed the oracle weblogic server 10gr3 and oracle BPM enterprise for weblogic 10gR3
    i have used the Admin tools from the "oracle BPM enterprise for weblogic" to setup the configuration and create the weblogic domain servers.
    i can launch the process administrator and import the project exp file to domain server.
    but what should i do to setup cluster environment using weblogic?
    what i want to do is :
    setup one admin machine..
    setup two product machine..
    enable the cluster so the admin machine can monitor the status of the product machine..
    thanks a lot ...

    The install guide at http://download-llnw.oracle.com/docs/cd/E13154_01/bpm/docs65/config_guide/index.html gives a reasonable amount of info on how to do this.
    Personally I have not used the OBPM option to configure WebLogic instead I've used the information in the above install guide to create the weblogic domain in advance of configuring OBPM.
    Once you've setup WebLogic configure OBPM using the values I mention in the following thread: How to set the JMX Engine parameter in Process Administation?
    Let me know any specific config questions and I'll do my best to answer them for you.
    Thanks,
    Mike

  • How to determine the Cluster name ?

    Grid version : 11.2.0.3 on Solaris 10
    When we start installing Grid Infrastructure, we specify a Cluster Name.
    Question1.
    How can I determine the cluster name of a 11.2 RAC Cluster ? We maintain a DB inventory. For each cluster , we want to specify the Cluster name.Hence we require the cluster name .
    Question2.
    The cluster name is of no functional importance. Right ? I don't remember using Cluster Name in any commands (srvctl, crsctl,...)

    To determine the cluster name,[oracle@iron1 ~]$ olsnodes -c
    ironcluster
    [oracle@iron1 ~]$I wouldn't say it has much technical significance, though it is used as a default in a few other names.
    John Watson
    Oracle Certified Master DBA
    http://skillbuilders.com

  • If i know the extract strucute how to know the DS name

    Hi All,
    If i know the extract structure name how to find the DS name?
    Regards
    Kiran

    If it is for LO extractors we can identify the datasource based on the extract structure.
    say if the extract structure name is MC11VA0HDR , 11 will be the application component, VA is the event for salesorder , HDR gives the level of the data it is extracting .So in this case the data source name will be 2LIS_11_VAHDR.
    For MC12VC0ITM the data source will be 2LIS_12_VCITM(12 is the application for delivery ,VC the event for delivery)
    But for generic and other extractors it is not possible to know the datasource name by seeing the extractstructure. We will have all the datasources information in the roosurce table. Here we can check the datasource which is having that extract structure.

  • How to change the tooltip names for my navbar

    Hi,
    Does anyone know how to change the tooltop names on the navbar as i need it to say "Next" instead of "Forward"
    Thank guys

    For SWF you'll need to edit the applicable playbar.fla
    C:\Program Files\Adobe\Adobe Captivate 7 x64\Templates\PlaybackFLA\AS3\
    In the Localization MovieClip:
    var pbcBtnTips_ENU:Array = new Array("Rewind ",
              "Back ",
              "Play ",
              "Pause ",
              "Forward ",
              "Closed Captioning ",
              "Audio On ",
              "Audio Off ",
              "Exit ",
              "Information ",
              "dummy for scratch bar ",
              "Table of Contents ",
              "2x Fast Forward Speed ",
              "4x Fast Forward Speed ",
              "Normal Speed ",
              "Print");
    For HTML 5 you'll need to edit the playbarScript.js file:
    C:\Program Files\Adobe\Adobe Captivate 7 x64\Templates\PlaybackFLA\HTML\
    cp.playbarTooltips =
    AudioOff : 'Audio Off',
    AudioOn : 'Audio On',
    BackGround : 'BackGround',
    Backward : 'Backward',
    Color : 'Color',
    CC : 'CC',
    Exit : 'Exit',
    FastForward : '2x Fast Forward Speed',
    FastForward1 : '4x Fast Forward Speed',
    FastForward2 : 'Normal Speed',
    Forward : 'Forward',
    Glow : 'Glow',
    Height : 'Height',
    InnerStroke : 'InnerStroke',
    Play : 'Play',
    Pause : 'Pause',
    Progress : 'Progress',
    Rewind : 'Rewind',
    Shade : 'Shade',
    Stroke : 'Stroke',
    Thumb : 'Thumb',
    ThumbBase : 'ThumbBase',
    TOC : 'TOC'

Maybe you are looking for