How to know the database tables for 0CUST_SALES_LKDH_HIER
Is there any way to find out the underlying data base tables for "0CUST_SALES_LKDH_HIER"?
In general where should I should go to check the underlying data base tables.
Table - KNVH - Customer Hierarchies
Easy ways first check for the datasources at http://help.sap.com/saphelp_nw2004s/helpdata/en/3d/5fb13cd0500255e10000000a114084/frameset.htm
If that really doesn't help you have to have a look at this Excellent blog by Roberto Negro : /people/sap.user72/blog/2005/09/05/sap-bw-and-business-content-datasources-in-pursuit-of-the-origins
Similar Messages
-
How to trace the database table for a structure
hi
am trying to find the database table for a structure unfortunately am failing to use the sql tracer any one know howelse i can do that the structure name is 'busbankcheck' and 'bus000flds'.
thanx in advanceHi florence,
1) U can go to tcode sldb and give ur structure name or if u can find which logical database it is from u can get the tables of the structure....
Suppose it is of HR it may be like pnp logical database and then to sldb and give pnp and u can get all the table of that....
2)If u know which fields u want from the stucture....then go to table DD03L and give ur fields name and it iwll bring where all tables this field is avaialble and u can find them......
3) the st05 sql trace can help u.....
I hope any one of the three will definetely help uuu
Regards
vamsi
Edited by: vamsi talluri on Jan 22, 2009 1:24 PM -
How to find the database table for this screen field
hi in XD02
There is a scrren field customer
name1 (firt line under name)
and email id fields
i wnat to know where the data stores goes w hen user eners in this screen i mean in which table and how to find it
for kunnr name1 i suppose it goes to kna1 but how to find it?
and f or email id whre it gots which table
regards
AroraHi,
when you press F1 it will give the necessary information
but some times it may give the structure names also
those structures are being used by the back end module pool
programm
so every time we can get the exact information about the
data type or length
but not sure that every time we get the exact database table name
and field name
according to me, if i dont know where some field are getting stored in
database ( if the field name and table is structure )
then i will ask my functional consultant ...
thanks & regards,
Venkatesh -
Hi Team,
R12 Instance :
Oracle Installed Base Agent User Responsibility --> Item Instances -->
Item Instance: Item Instances > View : Item Instance : xxxxx> Contracts : Item Instance : xxxxx> Service Contract: xxxxx>
In the above page there are two table regions.
Notes.
-------------------------------------Table Region---------------------------
Attachments
-------------------------------------Table Region---------------------------
--the attachments are shown using the query from the fnd_lobs and fnd_docs etc...
I want to know what are the document types are displayed in this page ?
--We developed a custom program to attach the attachments to the services contracts and the above seeded OAF page displays those ..as needed.
But after recent changes..the Attachments--> table region is not showing the attachments.
I have verified the query..and could not find any clue in that..
but i need some help if you guys can provide..
SELECT *
FROM
*(SELECT d.DOCUMENT_ID,*
d.DATATYPE_ID,
d.DATATYPE_NAME,
d.DESCRIPTION,
DECODE(d.FILE_NAME, NULL,
*(SELECT message_text*
FROM fnd_new_messages
WHERE message_name = 'FND_UNDEFINED'
AND application_id = 0
AND language_code = userenv('LANG')
*), d.FILE_NAME)FileName,*
d.MEDIA_ID,
d.CATEGORY_ID,
d.DM_NODE,
d.DM_FOLDER_PATH,
d.DM_TYPE,
d.DM_DOCUMENT_ID,
d.DM_VERSION_NUMBER,
ad.ATTACHED_DOCUMENT_ID,
ad.ENTITY_NAME,
ad.PK1_VALUE,
ad.PK2_VALUE,
ad.PK3_VALUE,
ad.PK4_VALUE,
ad.PK5_VALUE,
d.usage_type,
d.security_type,
d.security_id,
ad.category_id attachment_catgeory_id,
ad.status,
d.storage_type,
d.image_type,
d.START_DATE_ACTIVE,
d.END_DATE_ACTIVE,
d.REQUEST_ID,
d.PROGRAM_APPLICATION_ID,
d.PROGRAM_ID,
d.category_description,
d.publish_flag,
DECODE(ad.category_id, NULL, d.category_id, ad.category_id) category_id_query,
d.URL,
d.TITLE
FROM FND_DOCUMENTS_VL d,
FND_ATTACHED_DOCUMENTS ad
WHERE d.DOCUMENT_ID = ad.DOCUMENT_ID
*) QRSLT*
WHERE ((entity_name ='OKC_K_HEADERS_V'-- :1
AND pk1_value IN ( 600144,599046) --:2
AND category_id_query IN (1, :3, :4, :5, :6, :7) )
AND datatype_id IN (6,2,1,5)
AND (SECURITY_TYPE =4
OR PUBLISH_FLAG ='Y')))
--='000180931' -- 'ADP118'
The above seeded query is the one which is used for table region to retrieve the data..
how to know the dynamic values for this : AND category_id_query IN (1, :3, :4, :5, :6, :7) )
--SridharHi Patricia,
is it working for restricted key figure and calculated key figure ??
Note Number Fisc Period Opening Days
1 1 2
2 1 3
3 1 0
because I have other restriction, so I create two restricted key figure..
RK1 with restriction : Total Number of Note,
RK2 with restriction : Total Opening Days ,
then I Created a calculated key figure, average opening days in a period
CK1 = RK2 / RK1..
in this case, I am not sure if it will work or not..
for example, during RK2 calclation, it might be this 2+3 = 5, the line with 0 will be ignored..
during RK1 calcualtion, it might be 1 + 1 + 1 = 3. ---> Not sure in this case, the line with opening days 0 will be calculated or not..
could you please confirm.. -
How to find the database table behind the xtags varibles?
if in xtags we find that some varibles are not having the right data coming from xml -> database tables so how can we find out the names of database table behind it .
<!-- <xtags:variable id="msds" context="<%=specs%>" select="//header/msds"/>
<a href="/MSDS/<%=msds%> target="#">MSDS</a>
-->
now how to find the database table and the column name of database table from which the value of id msds is coming
Here they have stored the name of pdf file . from this code pdf file is displayedHi,
Thanks for your response. It is PM related. When I run a T Code - IK18, the field Total Counter Reading field appears. I am looking for that particular fields actual table name and field name. I think I have found it in IMGR table. Now I want to get IMRG-READG in my report, but there is no common fields in neither MKPF or MSEG table. So what can I do to connect IMRG table with either of them ? -
How to Read the internal table for the data download from the spool
HI all,
I have one issue regarding the spool ,we are getting the correct output as per requirement of user but when we send the same to the user in pdf format they did notget the same.
they are telling that the due date is missing from the pdf.
Please advice me how to track the internal table for the spool data converted intopdf in a readable format.
the FM used for the above task is :
call function 'CONVERT_OTFSPOOLJOB_2_PDF'
Please reply if any one worked on the same.
Thanks in advance.
Gaurav,Hi Wang,
Please let me know how you solved your question.
Points will be rewarded.
Thanks,
Arun. -
How to know the output type for particular tcode
Hi
how to know the output type for the VL10D & VAL TCODES.
Can anybody help me out.
Thanks and Regards
KrishnaraoHi Krishna,
GO to NACE and select your application and click on output types and in the next screen select your output type and and dbl click on Processing routines.
Here you will come to know about which driver program is used for which smartform or Script.
and for Program details you can refer table: REPOSRC
Regards,
Sachin -
How to find the Check table for a field ?
Hello All,
I have the filed name f1.
Now I want to know the check table of this field programatically and if this field has a configuration table then I need that table also.
eg: if werks is the field the Master Table is : MARC
and Configuration Table is : T001W.
Is this possible first of all programatically ?
If yes can anyone help me out ?
Regards,
Deepu.KHi again,
1. I don't know the master table for the field werks
A field is never independent. It is always linked to a table,
otherwise the information is only half.
2. So incase if we do not know the tablename,
its best to query the table DD03L with WERKS,
and filer out CHECKTABLE with *,
and take any one record.
regards,
amit m. -
What to know the master table for the following fields
I want to know the master table for the following fields.
Company code ( BUKRS )
Chart of depreciation ( AFAPL)
Main Asset Number (ANLN1)
Asset Sub Number ( ANLN2 )
Asset Class ( ANLKL )hi,
1) t001 (<b>for assets T093C</b>)
2) t096
3 and 4) anla
5) anka
rgds Andreas
Message was edited by:
Andreas Mann -
Need to know the base tables for the QM datasources
Hello SAP Experts,
I want to know the base tables for the below mentioned datasources which stores the transaction data.
1. 2LIS_05_QE1: Inspection Characterstics Results
2. 2LIS_05_QE2: Inspection Characterstics Results (Quan)
3. 2LIS_05_QVUDN: Usage decision for Inspection
Need your inputs.
Thanks,
Lasya.
Edited by: lasya john on Dec 10, 2008 8:28 PMHi Lasya,
You can use help.sap.com for this.
If you do not find this data source there...then
You can go to LBWE t-code in R/3 and then infront of the data source...you have maintenance option.
Click on that ...and go inside it in the display mode.
Here you can see a generic pool of fields on the left side which can be included in the data source........ field present in the data sources in the right side of the pool.
For every field you have a tructure name infront of it like MCXXXX where XXXX is the table name.
So the field is being from that particular table.
Even I would the same thing to reply to your thread.
You can follow the same procedure to find the table for any LO data source.
This is accurate in 99% cases...only in very few cases like purchasing...we get one or two fields from different tables.
Hope it helps.
Thanks
Ajeet -
How to know the corresponding Table-fields in R/3 for fields in BW
Hi,
We need to enhance the extractor for 0CUSTOMER_ATTR. We have added some new attributes in 0CUSTOMER in BW and we want to know the corresponding Table-Fields in R/3 from where we can populate the values.
The list of fields in BW is as follws. All are 0CUSTOMER attributes.
I am searching on the internet. If you know any link/place where I can find the corresponding fields, please let me know.
0AF_CUSTDC
0AF_CUSTID
0CITY_2
0DB87SIC1
0DBANSALES
0DBAREACOD
0DBCTRYCOD
0DBCTYNAM
0DBCUSTAT
0DBDISTRCOD
0DBEMPBND
0DBEMPTOT
0DBGUDUNS
0DBHQDUNS
0DBBLGLSTAT
0DBLOCACOD
0DBREGCOD
0DBSALBND
0DBSECTCOD
0DBYRSBND
0DBYRSTD
0DB_MAKTCOD
0DB_MATCDS
0FAX_NUM
0ID_TXNUMB3
0ID_XCPD
0LANGU
0POBOX_LOC
0SORTL
0TAX_NUMB2
0DBTRDSTYL
0DBADDRES1
0DBADDRES2
0DBCTRYNA
0DBSTPRCOD
0DBPOSTCOD
0DBNATID
0DBNATIDCO
0DBTELPHON
0DBCEONAME
0DBLNOFBUS
0DBANSLUS
0DBCURNCCO
0DBEMPHERE
0DBSUBCODE
0DBHQNAME
0DBHQCTYNM
0DBHQSTPR
0DBHQCTRYN
0DBULDUNS
0DBULNAME
0DBULCTYNM
0DBGUCTRYN
0DBGUCTRYC
0DBGUNAME
0DBNUMFAM
0DBHIERCO
0DBFAMUPDT
0DBBUSNAME
0DB_MATCH
Thanks,
Naveen ChoudharyNaveen,
Check http://help.sap.com/search/highlightContent.jsp
Also see Re: 0customer_attr enhancement
If the source fields in R/3 are standard, you should be able to find the mapping in the help documentation. If its extension field, then you got to see which extractor (based on the base table extension) suits the best and extend it accordingly else create a new generic extractor.
Hope it helps -
How to transport the DATABASE TABLE into the Test system ?
Hi Experts,
I am working on BI7, I had created Database table in BDV system using SE11. Tech_name is ZGLACC_TEMP. I had activated it. I had used this database table for the purpose of writing the start routine in the transformation. while I am transporting the transformations to the test system, It is showing as syntax error in ABAP program,
In BDV system there are no syntax errors. it is working fine,
So now I have to transport the database table to test system so that I can transport the transformations into Test system without any error.
Kindly anyone can give the answer , it will be appreciate and points will be assigned.
thanks
sekharHi Sekhar,
Go to SE11, go into the change mode of your table and change the Object Directory entry (Goto -> Object Directory Entry) to some valid package (other than $tmp). Then it will ask for a transport request. Give a transport request and then I believe you know what to do with that transport.
Another thing to keep in mind ... transport all the data elements and domains you have created for this table. Change their Object Directory Entry and assign them to the same transport request.
Best regards,
Kazmi -
can one tell how to find the database size?
Depends what you mean by database size and how you want the output to look?
Are you referring to the number of rows across all tables of a schema? The number of bytes used by the rows? The number of bytes used by the tablespaces? The number of bytes used by the datafiles? etc. etc. etc. So many options.
Be more clear in your requirements please. -
How to know the database name?
I have installed oracle 10g and developer suite.. I am trying to create forms now.
But its error out: TNS: could not resolve the connect identifier specified!!!
I forgot the Data base name.. How can I know the database name??
Thanks in Advance!!!!!!!!!!I have installed oracle 10g and developer suite.. I'm sorry, but you are going to have be more specific as what you installed!
If you installed Oracle Database 10g Express Edition then it is not (by default) configured to allow a connection through SQL*Plus. It is primarily configured to open a connection through the "Go To Database Homepage" url/link in the Start Menu => Oracle Database 10g Express Edition => Go To Database Homepage. In order to connect to the database from SQL*Plus (which is included with Oracle Developer Suite 10g) you will need to run the Net Configuration Assistant to configure your TNSNAMES.ora and SQLNET.ora files. Go to Start Menu => Oracle - DevSuiteHome1 => Configuration and Migration Tools => Net Configuration Assistant to run the assistant. After you run the assistant, test to make sure can connect through SQL*Plus before you attempt to connect through Forms.
Hope this helps,
Craig... -
How to get the Database table behind condition records
Hello All
In transaction VK13, after giving condition type, I can select sales document.
For a given Sales Document number, there are several conditions.
How can i extract all the conditions for a given sales document?
I am coding a report for this. In which database table can i get the condition between sales document number & different conditions attached to it?
On the screen, i can see that the fields are from the structure KOMG. What is the corresponding table?
Thanks
Chandra SekharHi,
corersponding tables will be konp , a771,a511,a564
here i am providing you sample query related to it
{ -Get the Territory list price YPR0
SELECT vkorgau
zzland1_ag
zzmatgrade
a511~kfrst
datbi
datab
kbetr
INTO TABLE it_list1
FROM a511
JOIN konp
ON a511knumh = konpknumh
WHERE a511~kappl = 'V'
AND a511~kschl = 'YPR0'
AND vkorgau = '5000'
AND zzland1_ag = v_land1
AND loevm_ko <> 'X'.}
Thanks & Regards,
Sateesh.
Edited by: sateesh kumar on Nov 12, 2009 12:59 PM
Maybe you are looking for
-
Jsp tags in .html pages
Hi Is possible to put jsp tags in pages .html? I try this example: <html> <head> <title></title> </head> <% out.print("teste"); %> <body> </body> </html> and the result in the page is the jsp code. Tomcat don't print "teste", print out.print("teste")
-
ICR Process 003 - FBICR3 - Display original FI document
Hello, I am doing several test run of ICR Process 003 and I have found that, without any reason, sometimes functionality "display original FI document2 does not work when pushing the "button". Am I doing something wrong? Is there any functional reaso
-
Where are the media files?
I can't believe I'm asking such a basic question but I can't find the answer! Where are the media clips stored in iMovie 6? In past versions, the media was kept in a folder titled "Media". I've searched my computer for clips I want to export to FCE b
-
Is there and easier way to do keywords?
I love the idea of assigning keywords to my photos, but as soon as I foun that I have to enter in each keyword in the preferences pane before I can use it I am now not looking forward to it. I was hoping that I could just enter in my keywords on each
-
Imaging fails with segmentation fault on file NoName$####
Hi, Trying to take an image of a system and continue to run into this error, though it occurs in various different folders during the imaging process. server is running Zenworks Imaging 6.5 not sure on SP level have tried PXE on disk, as well as the