How to know the date of the deleted delta

Hi,
   Deltas run every 30 min daily.
   One of the delta is deleted .
   How can I know on what date & which delta is deleted.
  Points will be assigned.
Message was edited by:
        vijay ajarla

Hi Vijay,
Are you loading a CUBE or ODS? How did you come to know that a DELTA has been deleted? Is there any message saying that a DELTA or a REQUXXX is missing? any other info?
All the above information would help us in identifying your issue quickly.
But try this anyway .......
Goto Manage of the ODS or CUBE...goto the Contents Tab...Here you will find a Button "Selective Deletion"...click on this button.
This will popup another window....in this window you will find a Button "LOG", click on it, this will again display a list of LOGs, if you know the date on which the DELTA might have deleted...then double click on that LOG and you will find the request id that was deleted(if a request was deleted as a whole) or you will find hte selection used to delete data from the target (if selective deletion was used)
Hope this helps.
Cheers,
Praveen.

Similar Messages

  • How to know the balance and validity of internet data in iPad

    How to know the balance and validity of internet data in iPad?

    Sir I m using internet in ipad4 with airtel network
    They provide me 2gb data with the amount of 255 rupees
    And now I inserted the sim in my ipad4
    And start the surfing on safari n all
    And now I wanted to know how much data is balance.

  • How to know the User name and date, who executed the report last time.

    Hi All,
    We are collecting a list of reports which are not executed for past 3 months. Can anybody tell me how to know the username and date they executed the report last time.
    Is there any table to look ? or is there any process ?
    Thanks,
    Ravi.

    Ravi,
    Use SE16 - then look at rszcompdir.
    We look up Version = 13 for queries.
    Regards
    Gill

  • How to retrive the deleted data in Z table

    Hi Gyes,
    How to retrive the deleted data in Z table.
    Thanks & Regards,
    Suresh

    Hello Suresh
    If you have not activated the technical setting "Log data changes" in the definition of your z-table (which is unlikely) then there will be no change documents available.
    If you have downloaded your z-table entries sometimes you could use these data for recovery.
    Otherwise your last change is to ask your <b>basis team</b> when the last backup has been made.
    Regards
      Uwe

  • How to find the deleted data in tables

    guys,
    how to find the deleted data in tables example: i want to see whether anyone deleted data in MB5B report tables like mbew, etc.,
    regards,

    Hi,
    MBEWH is actually the history table of MBEW. It will record all the changes. As I have told you earlier if you have deleted the record dirctly from the table then it will not come even in the table MBEWH
    That means no changes have been made.
    regards

  • How to know the data transfer is complited? there is any message will get l

    how to know the data transfer is complited? there is any message will get like 'data uploaded is successfully complited' ?

    Hi,
    You can check SY-SUBRC = 0 or if there is an exception raised then an error occured.
    Regards,
    Ferry Lianto

  • HOW TO Know the cube for particular data source

    HI ,
    How to know the standard  data targets for standard  data sources in sap .
    can u give me the some links o it .
    regards ,
    srinvias

    Hi Srinivas,
    Go through this below BI Content Help. Here you will be able to find the data sources for specific application areas with the standard data models, you will find standard cubes as well.
    [http://help.sap.com/saphelp_nw04/helpdata/en/3d/5fb13cd0500255e10000000a114084/frameset.htm]
    Regards,
    Pratap Sone

  • HT3986 Does anyone know how to enable the "Delete" key for logging on the Windows 7 partition on the latest iMac, via the latest Apple wireless keyboard? Many Thanks

    Hi All
    Does anyone know how to enable the "Delete" key for logging on the Windows 7 partition on the latest iMac, via the latest Apple wireless keyboard - the standard wired apple keyboard works fine via this key but not the new wireless keyboard?
    Many Thanks

    Holy crap, this fixes the issue.  At least temporarily it has.  I should add that my issue was single finger forward/back swipe stopped working on the magic mouse in Firefox since Mavericks came along.  I have been fighting this since I upgraded to Mavericks a few months ago.  Thank you, tbirdvet.  You have no idea how much easier you just made using my iMac again.
    Message was edited by: wadems

  • How to retrive the deleted entries in the ztable

    please let me know how to retrive the deleted entries in the ztable.

    >
    Naseer uddin wrote:
    > Hi,
    >
    >   While creating a table have u activated the buffering (full).
    >   if not then it is not possible to retrive the lost data, and if u have activated the full buffering of table then it is possible to retrive data, up to some extent, using transaction Code se14.
    Complete Nonsense.*
    buffering doesn't mean that it will buffer the records back in database ,once you deleted.it means it will allow the buffer the table to memory only while read access.

  • How to know the technical name of psa

    hi BW gurus,
    I need to delete data from psa i need to increase the free space.  so how to know the technical name of psa.  and how to delete the data from psa.
    Thanks in advance

    Shahid,
    Agree with Tarun on this...
    Check the PSA technical name from the delete PSA option on the PSA screen of the AWB...the PSA name would be /bic/b000*...
    Shahid...also chek the table RSTSODS in SE11.
    U can find the PSA technical name in the field ODSNAME_TECH..
    Just enter the name of the PSA in the ODSNAME field..the PSA name would be
    your infosource followed by some extension.
    Deleting the data from the PSA:
    Shahid,
    this can be achieved via a program and also via the standard procedure of going to the PSA in the AWB and choosing the option delete the PSA data...
    Here select the requests which are older than any number of days or before any date..
    Hope this helps...
    Regs.
    Nick.
    Message was edited by:
            Nick

  • How to know the dynamic values for this :AND category_id_query IN (1, :3, )

    Hi Team,
    R12 Instance :
    Oracle Installed Base Agent User Responsibility --> Item Instances -->
    Item Instance: Item Instances > View : Item Instance : xxxxx> Contracts : Item Instance : xxxxx> Service Contract: xxxxx>
    In the above page there are two table regions.
    Notes.
    -------------------------------------Table Region---------------------------
    Attachments
    -------------------------------------Table Region---------------------------
    --the attachments are shown using the query from the fnd_lobs and fnd_docs etc...
    I want to know what are the document types are displayed in this page ?
    --We developed a custom program to attach the attachments to the  services contracts and the above seeded OAF page displays those ..as needed.
    But after recent changes..the Attachments--> table region is not showing the attachments.
    I have verified the query..and could not find any clue in that..
    but i need some help if you guys can provide..
    SELECT *
    FROM
    *(SELECT d.DOCUMENT_ID,*
    d.DATATYPE_ID,
    d.DATATYPE_NAME,
    d.DESCRIPTION,
    DECODE(d.FILE_NAME, NULL,
    *(SELECT message_text*
    FROM fnd_new_messages
    WHERE message_name = 'FND_UNDEFINED'
    AND application_id = 0
    AND language_code  = userenv('LANG')
    *), d.FILE_NAME)FileName,*
    d.MEDIA_ID,
    d.CATEGORY_ID,
    d.DM_NODE,
    d.DM_FOLDER_PATH,
    d.DM_TYPE,
    d.DM_DOCUMENT_ID,
    d.DM_VERSION_NUMBER,
    ad.ATTACHED_DOCUMENT_ID,
    ad.ENTITY_NAME,
    ad.PK1_VALUE,
    ad.PK2_VALUE,
    ad.PK3_VALUE,
    ad.PK4_VALUE,
    ad.PK5_VALUE,
    d.usage_type,
    d.security_type,
    d.security_id,
    ad.category_id attachment_catgeory_id,
    ad.status,
    d.storage_type,
    d.image_type,
    d.START_DATE_ACTIVE,
    d.END_DATE_ACTIVE,
    d.REQUEST_ID,
    d.PROGRAM_APPLICATION_ID,
    d.PROGRAM_ID,
    d.category_description,
    d.publish_flag,
    DECODE(ad.category_id, NULL, d.category_id, ad.category_id) category_id_query,
    d.URL,
    d.TITLE
    FROM FND_DOCUMENTS_VL d,
    FND_ATTACHED_DOCUMENTS ad
    WHERE d.DOCUMENT_ID = ad.DOCUMENT_ID
    *) QRSLT*
    WHERE ((entity_name    ='OKC_K_HEADERS_V'-- :1
    AND pk1_value          IN ( 600144,599046) --:2
    AND category_id_query IN (1, :3, :4, :5, :6, :7) )
    AND datatype_id       IN (6,2,1,5)
    AND (SECURITY_TYPE     =4
    OR PUBLISH_FLAG        ='Y')))
    --='000180931' -- 'ADP118'
    The above seeded query is the one which is used for table region to retrieve the data..
    how to know the dynamic values for this : AND category_id_query IN (1, :3, :4, :5, :6, :7) )
    --Sridhar                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

    Hi Patricia,
    is it working for restricted key figure and calculated key figure ??
    Note Number Fisc Period Opening Days
    1 1 2
    2 1 3
    3 1 0
    because I have other restriction, so I create two restricted key figure..
    RK1  with restriction :  Total Number of Note,
    RK2  with restriction :  Total Opening Days ,
    then I Created a calculated key figure, average opening days in a period
    CK1 = RK2 / RK1..
    in this case, I am not sure if it will work or not..
    for example, during RK2 calclation, it might be this   2+3 = 5, the line with 0 will be ignored..
    during RK1 calcualtion, it might be 1 + 1 + 1 = 3. ---> Not sure in this case, the line with opening days 0 will be calculated or not..
    could you please confirm..

  • With a contract number, how to know the total PO release value against it?

    Usually one contract corresponds to multiple PO records, now we know the contract number, then how to know the total PO release value against this contract.  In other word, we would like to know the total release value of all the POs with the same contract number.  To just input the contract number in EKPO table? but then look for which field in this table to add these PO release values up?
    We will give you reward points!
    Thanks!

    hi Mohammad,
    By following your instruction, input the contract number 4800000112 into Document number field, then hit Enter, get the following (only copy two records here for example), but kind of a mess.  Could you let us know which one is the PO release value for this contract?
    Contract   Type Vendor     Name                                 PGp Agmt. date
      Item  Material           Short text                               Mat. group
      D I A Plnt SLoc                 Targ.qty. Un       Net price  Curr.   per Un
    4800000112 WK   2000012012 GULF INTERSTATE FIELD SERVICES       QBH 06/20/2006
    Agreement start06/20/2006 Agreement end 12/31/2007
    Tgt. val.        1,000,000.00  USD   Open          1,000,000.00 USD   100.00 %
      00001                    Inspection Svcs, Construction            R3VNI
      L   U                                  0  UL            0.00  USD       1 EA
      00002                    Chief Inspector                          R3VNI
      L   U                                  0  DAY         390.00  USD       1 DAY

  • How to know the run time of a program..?

    Hi Gurus,
    How to know the exact run time of a program....?
    Suppose i've a program....I've changed the code to improve the performance.
    Now i want to compare run time of older and new one...How to do this...?
    Pls help me ....
    Thanks and Regards,
    Nagarjuna

    Hi,
    go thru the below mentioned code............
    data:   start TYPE i,
              end TYPE i,
              dif TYPE i.
    GET RUN TIME FIELD start.
    SELECT SINGLE bukrs belnr gjahr blart budat
    FROM bkpf
    INTO (cc, doc, fy, doc_ty, pst_dt)
    WHERE bukrs = p_bukrs
    AND belnr = p_belnr
    AND gjahr = p_gjahr.
    GET RUN TIME FIELD end.
    dif = end - start.
    WRITE: /001 'Time for select',
    067 ':', dif, 'microseconds'.
    Reward all helpful answers.
    Thanks

  • How to know the status of concurrent program from back-end in oracle apps

    Hi,
    Can you please explain me step by step how to know the status of the concurrent program from back end in oracle apps.
    Thanks,
    Raj

    When a record is being updated by a form, if you create a Pre-Update trigger on the block, the trigger will run for each record being updated.
    Same thing happens with a Pre-Insert and Pre-Delete trigger.

  • How to know the Function Module of a standard datasource?

    Hi All,
    As per my understanding there will be an underlying Function Module for each SAP BI datasource. But I dont know how to know the name of that  Function Module for a particular datasource.Could anybody pls help me as i am need of this urgently.
    Thanks in advance.
    Regards,
    kp

    Run transaction RSO2 and enter the required datasource whether transaction data, MD attributes or Text then click on display.  In the message pain and the bottom of the gui it will tell you which function module said datasource uses for extraction.
    Cheers
    Craig

  • How to recover the deleted reports from crystal reports XIR2

    Hi,
    There have been few crystal reports have been deleted from crystal environment and i would like to know how to recover them. please advice the best possible ways to recover them. CMS repositoty in SQL server database
    thanks in advance
    Regards,
    Krishna

    Hope, your question is this "How to recover the deleted Crystal reports in XI R2".
    Answer for this question is...
    Yes, it is possible if you have backup of your CMS and FRS.
    Copy the CMS database from the backup to your database server and point the CMS ODBC system DSN to it.
    Copy the backed up file store to a Temp directory.
    Change the path of input and output file repository servers in the CMC, for each server, to the Temp file store directory.
    You will now be able to find the reports. Copy those reports to the BO server's local disk, or create a BIAR file using the Import Wizard.
    Point the ODBC system DSN back to the original database and also change the paths on input file repository and output file repository servers back to their original locations.
    Publish the reports to Enterprise from the BusinessObjects server's local hard disk.

Maybe you are looking for

  • Issues with spry gallery in a DW template

    Hi all, I have incorporated a spry gallery I originally found at: http://www.adobe.com/devnet/dreamweaver/articles/spry_photo_album_02.html into my page. This works fine until I save my page as a template.The js seems to dissapear leaving the gallery

  • AuthenticateAsClient is taking so much time

    Hi  I am working on a client - server architecture for data transfer. I am using SSLStream for sending and receiving files. I am using AuthenticateAsClient on client side to authenticate server but i am facing an issue.  1. my application getting sto

  • Using RNIF Adapter

    Hi all, We are trying to test RNIF adapter by sending message from XI QA via RNIF adapter (Receiver) to XI DEV via RNIF adapter (Sender). In sxmb_moni (QA) the message is ok, but in RWB (Adapter engine monitoring) the message appears with an error: T

  • Float Data Value and Scientific Notation

    Hello All, SQL Server converts some of the float value into scientific notation for example 0.00001 will be stored as 1E-05. Is there any simple method\formula\threshold to precisely tell when some particular value will be converted to scientific not

  • Send Button is gone from new message toolbar

    I was forwarding a mail message and when I went to "send" it, there was no send button to select. I think thhe default mailbox might have been my defunct .mac address. I toggled the correct email account and still no send button. I rebooted, nothing.