How to know the existing BDC in the system

how to know the existing BDC in the system
cheers
AJ

Hi,
You can check for existing recordings in your system in t-code SHDB. This transaction is also used for recording a transaction and generating a function module or a program from the recording which you can then use in your program. There are no standard existing BDC's as far as I know. Because most of the times the BDC table is filled programitically and then passed to the Call Transaction.
regards,
Advait Gode.

Similar Messages

How to know the system generated password when reseting users password?

Dear All,
I have reset password using "genarated new password" in the portal from User admin,but dont want to send a e-mail notification to end users, instead of that i want to know the system generated password.
But system doses't shows it.How can I tell what the password is and give it to the user?
I have a All super admin rols.
Pleas guide.
Thanks in advance.

Basically you can't! If you tell it to generate one, then that's only sent to the user. Why not enter your own random password or let the user pick their own through some sort of self service function?

How to know the system configuration using Java.

Hello Everyone,
I wanna know the system configuration (Hard Disk size,Ram capacity,Processor speed) .Can we know it using Java API? Or else is there any API which makes my life easier?
Can someone let me know,please?
All ur answers r most welcome.
Thanks

--> provides you with some basic info on os user and os but my best bet is to find a windows system file that maintains this information and then read the data from it
import com.sun.servicetag.SystemEnvironment;
SystemEnvironment se = SystemEnvironment.getSystemEnvironment();
        System.out.println(se.getCpuManufacturer());
        System.out.println(se.getHostId());
        System.out.println(se.getHostname());
        System.out.println(se.getOsArchitecture());
        System.out.println(se.getOsName());
        System.out.println(se.getOsVersion());
        System.out.println(se.getSerialNumber());
        System.out.println(se.getSystemModel());
        System.out.println(se.getSystemManufacturer());Edited by: emmanuel.putti on Nov 11, 2008 6:43 AM

How to know the System State in java

Hi
I would like to know ,is there a way to get the System status in java, like whether System is idle or any browser is opened or any application is running?
this information is required to run the screensaver as we know Screen saver will run when System is idle.
This is very Urgent
Thank U
Dharma

You cannot get the systems status without running something.
Then when you run something it will say, something is running.
You cannot implement this functionality in Java.
You may be able to get this information in JNI but you will need to have a good low level understanding to do it.
I would suggest you write a Windows screensaver (there should be examples on the web) and then have it run a Java application when it is active.

How to know the system priviledges??

I want to use SQL plus to retrieve the system priviledges that I owned. What can I do?
Thanks

You may have system privs directly or through roles.
select your system privs from following tables
1. user_role_privs
2. user_sys_privs
3. role_role_privs
4. role_sys_privs

How to know the amount of ora 11g page-out memory (sga and pga)?

How to know the amount of oracle 11g page-out memory ( sga and pga) in the SunSolaris 10 Unix and Linux.
I need to know how many oracle memory are being page-out ( all and for a one oracle server process).
thanks

You can monitor the paging with vmstat or sar commands.
http://download.oracle.com/docs/cd/B28359_01/server.111/b32009/tuning.htm#sthref500
You can also get the paging information on OEM home page if configured for your database.
But I don't know if there exists a method with which one can find out how much memory per session/server process is getting paged out.

How to know the dynamic values for this :AND category_id_query IN (1, :3, )

Hi Team,
R12 Instance :
Oracle Installed Base Agent User Responsibility --> Item Instances -->
Item Instance: Item Instances > View : Item Instance : xxxxx> Contracts : Item Instance : xxxxx> Service Contract: xxxxx>
In the above page there are two table regions.
Notes.
-------------------------------------Table Region---------------------------
Attachments
-------------------------------------Table Region---------------------------
--the attachments are shown using the query from the fnd_lobs and fnd_docs etc...
I want to know what are the document types are displayed in this page ?
--We developed a custom program to attach the attachments to the services contracts and the above seeded OAF page displays those ..as needed.
But after recent changes..the Attachments--> table region is not showing the attachments.
I have verified the query..and could not find any clue in that..
but i need some help if you guys can provide..
SELECT *
FROM
*(SELECT d.DOCUMENT_ID,*
d.DATATYPE_ID,
d.DATATYPE_NAME,
d.DESCRIPTION,
DECODE(d.FILE_NAME, NULL,
*(SELECT message_text*
FROM fnd_new_messages
WHERE message_name = 'FND_UNDEFINED'
AND application_id = 0
AND language_code = userenv('LANG')
*), d.FILE_NAME)FileName,*
d.MEDIA_ID,
d.CATEGORY_ID,
d.DM_NODE,
d.DM_FOLDER_PATH,
d.DM_TYPE,
d.DM_DOCUMENT_ID,
d.DM_VERSION_NUMBER,
ad.ATTACHED_DOCUMENT_ID,
ad.ENTITY_NAME,
ad.PK1_VALUE,
ad.PK2_VALUE,
ad.PK3_VALUE,
ad.PK4_VALUE,
ad.PK5_VALUE,
d.usage_type,
d.security_type,
d.security_id,
ad.category_id attachment_catgeory_id,
ad.status,
d.storage_type,
d.image_type,
d.START_DATE_ACTIVE,
d.END_DATE_ACTIVE,
d.REQUEST_ID,
d.PROGRAM_APPLICATION_ID,
d.PROGRAM_ID,
d.category_description,
d.publish_flag,
DECODE(ad.category_id, NULL, d.category_id, ad.category_id) category_id_query,
d.URL,
d.TITLE
FROM FND_DOCUMENTS_VL d,
FND_ATTACHED_DOCUMENTS ad
WHERE d.DOCUMENT_ID = ad.DOCUMENT_ID
*) QRSLT*
WHERE ((entity_name    ='OKC_K_HEADERS_V'-- :1
AND pk1_value          IN ( 600144,599046) --:2
AND category_id_query IN (1, :3, :4, :5, :6, :7) )
AND datatype_id       IN (6,2,1,5)
AND (SECURITY_TYPE     =4
OR PUBLISH_FLAG        ='Y')))
--='000180931' -- 'ADP118'
The above seeded query is the one which is used for table region to retrieve the data..
how to know the dynamic values for this : AND category_id_query IN (1, :3, :4, :5, :6, :7) )
--Sridhar

Hi Patricia,
is it working for restricted key figure and calculated key figure ??
Note Number Fisc Period Opening Days
1 1 2
2 1 3
3 1 0
because I have other restriction, so I create two restricted key figure..
RK1 with restriction : Total Number of Note,
RK2 with restriction : Total Opening Days ,
then I Created a calculated key figure, average opening days in a period
CK1 = RK2 / RK1..
in this case, I am not sure if it will work or not..
for example, during RK2 calclation, it might be this   2+3 = 5, the line with 0 will be ignored..
during RK1 calcualtion, it might be 1 + 1 + 1 = 3. ---> Not sure in this case, the line with opening days 0 will be calculated or not..
could you please confirm..

With a contract number, how to know the total PO release value against it?

Usually one contract corresponds to multiple PO records, now we know the contract number, then how to know the total PO release value against this contract. In other word, we would like to know the total release value of all the POs with the same contract number. To just input the contract number in EKPO table? but then look for which field in this table to add these PO release values up?
We will give you reward points!
Thanks!

hi Mohammad,
By following your instruction, input the contract number 4800000112 into Document number field, then hit Enter, get the following (only copy two records here for example), but kind of a mess. Could you let us know which one is the PO release value for this contract?
Contract   Type Vendor     Name                                 PGp Agmt. date
Item Material           Short text                               Mat. group
D I A Plnt SLoc                 Targ.qty. Un       Net price Curr.   per Un
4800000112 WK   2000012012 GULF INTERSTATE FIELD SERVICES       QBH 06/20/2006
Agreement start06/20/2006 Agreement end 12/31/2007
Tgt. val.        1,000,000.00 USD   Open          1,000,000.00 USD   100.00 %
00001                    Inspection Svcs, Construction            R3VNI
L   U                                  0 UL            0.00 USD       1 EA
00002                    Chief Inspector                          R3VNI
L   U                                  0 DAY         390.00 USD       1 DAY

How to know the balance and validity of internet data in iPad

How to know the balance and validity of internet data in iPad?

Sir I m using internet in ipad4 with airtel network
They provide me 2gb data with the amount of 255 rupees
And now I inserted the sim in my ipad4
And start the surfing on safari n all
And now I wanted to know how much data is balance.

How to know the class method behind an enterprise service

Hi,
SAP has provided enterprise services for Room booking in Real Estate module. They are even shipping the complete application for a nominal price. But the standard version is not suitable for our client requirement so they want to develop this application inhouse.
Now my question is: I know the enterprise services used in this application. How to know the implementing methods behind these enterprise services ?
If possible suggest which approach will be a better option for the inhouse development.
1. Webdynpro ABAP and use directly methods behind the enterprise services.
2. Webdynpro ABAP and create client proxy class for the enterprise services.
3. Webdynpro JAVA and use the enterprise services.
4. Using visual composer modelling the application.
Please suggest the best alternative.
Best Regards,
Aleem Mohiuddin.

Hi
They are even shipping the complete application for a nominal price. But the standard version is not suitable for our client requirement so they want to develop this application inhouse.
I assume you are talking about xApps.
How to know the implementing methods behind these enterprise services ?
In sproxy transaction you can search service and then you can see class and method implemented behind that particular service.
1. Webdynpro ABAP and use directly methods behind the enterprise services.
In my opinion not recommended to bypass ES and use method behind it.
2. Webdynpro ABAP and create client proxy class for the enterprise services.
Not sure why you want to create proxy of ES.
3. Webdynpro JAVA and use the enterprise services.
4. Using visual composer modelling the application.
You can use either Webdynpro (ABAP or Java) or VC to model your application which consume ES in backend. Both options are good, you can chose Java or ABAP flavor of dynpro based on skill available in team. VC is very effective in rapid modelling and can be used in protyping or in development of complete application.
Regards,
Gourav

How to know the error in the goods movement

Hai gurus,
a) while doing goods issue and goods receipt , if there is any
error in the goods movement how to know the same and correct it.
Regards,
sekar chand

Hi,
If You are doing GR and GI during order confirmation then you will find a tab for Display Error(Bell Ikon).At the time of any error you will find this icon highlighted.press it you will find details error description and proposed solution.
Regards,
Dhaval

How to know the PO Created with RFQ or Not..??

Hi MM Gurus,
How to know the purchase order created with one quotation or not. because when i am trying to create PO with /ME21N through DOcumen Overview on. there is list of Quotation. i created PO with XYZ quotation. and after creation of PO i am trying to create another PO with another quotation but in that list still XYZ quotation is Displying. so how to knows once PO cretd with Quotation or not. . and I dont wanted to disply quotation once created Po.
Thanks in Advance.
N.A.Reddy

Hi Pradeep. Thanks for the mail.
the problem is ....with *quotation...*
How to know the purchase order created with one quotation or not.
because when i am trying to create PO with /ME21N through DOcumen Overview on. there is list of Quotation.
I created PO with XYZ quotation. and after creation of PO i am trying to create another PO with another quotation but in that list still XYZ quotation is Displying.
so how to knows once PO cretd with Quotation or not. .
and I dont wanted to disply quotation once created Po.
Thanks in Advance.
N.A.Reddy

How to know the count of record in CR XI?

Post Author: Liu ming
CA Forum: Deployment
Hi All,
I create a report by CR XI release 2. The report is viewed in ASP.Net. So, I would like show a message when the report have no record. My question is how to know the count of record?
Thanks.

I was able to do this by using
ora:countNodes('Receive_1_Read_InputVariable','BILL','/ns2:BILL/ns2:CMS1500')

HT204088 How to know the rest of money in a credit card and the total of purchase amount?

How to know the rest of money in a credit card and the total of purchase amount?

What do you mean 'the rest of money in a credit card' ? All you can see on your purchase history is what you've bought, you can't see how things were billed nor the total amount that you've spent in the store - you will need to sum your purchases yourself to see the total.

How to know the timings of the run time of thr report

Hi,
Can you please tell me how to know the run time of the query , i mean how much time it took for the query to dispaly the results .
Also we have these queries in the workbook. How to refresh the work book . is it enough if i refresh the query.
Thanks
Sruthi

Hi
How can we check in RSRT tcode?
And how can we do i RSRTRACE?
Can I know the procedure.

How to know the existing BDC in the system

Similar Messages

Maybe you are looking for