How to know the Infotype of a wage type and table ARRRS trigering ?

Dear SAP-HR experts .
I am bit confused in one thing , a wage type named 4EW2 (It is Emp welfare fund)
It is deduction wage type .
(a.) How can i know that in which Infotype this wage will appear .
I tried IT-14 / 15 but it is not there .
(b.)When i see the clusters it is appearing in table ARRRS and DDNTK .
When this table will trigger in payroll run . ?
Thanks & Regards : rajneesh

Hi,
Please check the table v_t512z if you want to check the wagetype that in which infotype it will belong.
2. ARRRS Triggers whenever there is a insufficent funds left in your gross after deducting the staturary deduction, then based on the characterstic of wage type amount will be send to arrears Table. so that it will be deducted in the next pay period.
Diffrence between ARREARS and DDNTK is :-
If amount goes to ARREARS Table then it will be deducted on the next pay period based on buiness logic to handle the arrears.
if amount goes to DDNTK which means deduction not taken then for that particular pay period this deduction is not taken and should not be consider is fututre pay period also.
Hope this would help you.
Thanks,
Amar

Similar Messages

WAD - How to Minimize the Space Between Drop-Down Box and Table

Hi all,
I am trying to display a query in 'Table' with Web Application Designer (WAD). First, I have placed the 'Drop-down box' web-item and 'Table' web-item below it in the Web Template. There is an half-inch of space between the 'Drop-down box' and the 'Table' when it displays on the browser. It doesn't look good with this gap.
How can I eliminate or minimize this gap, PLEASE ?.
Thanks.

Hi Ingo & Hari,
 Thanks a lot for your help. Now it reduced the gap between the drop-down box and table to 3mm on browser.
But, there is no gap on web template. If we change some settings, we could still further reduce the gap while displaying it on browser.
Any new suggestions, PLEASE. Thanks again.

<object>
 <param name="OWNER" value="SAP_BW"/>
 <param name="CMD" value="SET_PROPERTIES"/>
 <param name="TEMPLATE_ID" value="TESTWBOLAPQUERYUSER1"/>
 TEMPLATE PROPERTIES
</object>
<object>
 <param name="OWNER" value="SAP_BW"/>
 <param name="CMD" value="SET_DATA_PROVIDER"/>
 <param name="NAME" value="DATAPROVIDER_1"/>
 <param name="QUERY" value="Z_BWSTAT_OLAP_PER_QUERY_USER"/>
 <param name="INFOCUBE" value="0BWTC_C10"/>
 DATA_PROVIDER: DATAPROVIDER_1
</object>
<html>
<head>
 <title>BW Web Application</title>
 <link href="/sap/bw/Mime/BEx/StyleSheets/BWReports.css" type="text/css" rel="stylesheet"/>
</head>
<body>

<TABLE cellSpacing=1 cellPadding=1 width="75%" border=0>
<TR>
 <TD vAlign=top><object>
 <param name="OWNER" value="SAP_BW"/>
 <param name="CMD" value="GET_ITEM"/>
 <param name="NAME" value="DROPDOWNBOX_1"/>
 <param name="ITEM_CLASS" value="CL_RSR_WWW_ITEM_FILTER_DDOWN"/>
 <param name="DATA_PROVIDER" value="DATAPROVIDER_1"/>
 <param name="WIDTH" value="69"/>
 <param name="IOBJNM" value="0TCTUSERNM"/>
 ITEM: DROPDOWNBOX_1
</object></TD>
 <TD vAlign=top><object>
 <param name="OWNER" value="SAP_BW"/>
 <param name="CMD" value="GET_ITEM"/>
 <param name="NAME" value="DROPDOWNBOX_2"/>
 <param name="ITEM_CLASS" value="CL_RSR_WWW_ITEM_FILTER_DDOWN"/>
 <param name="DATA_PROVIDER" value="DATAPROVIDER_1"/>
 <param name="WIDTH" value="19"/>
 <param name="IOBJNM" value="0TCTIFCUBE"/>
 <param name="MAXVALUES" value="1"/>
 ITEM: DROPDOWNBOX_2
</object></TD>
 <TD vAlign=top><object>
 <param name="OWNER" value="SAP_BW"/>
 <param name="CMD" value="GET_ITEM"/>
 <param name="NAME" value="DROPDOWNBOX_3"/>
 <param name="ITEM_CLASS" value="CL_RSR_WWW_ITEM_FILTER_DDOWN"/>
 <param name="DATA_PROVIDER" value="DATAPROVIDER_1"/>
 <param name="WIDTH" value="34"/>
 <param name="IOBJNM" value="0CALDAY"/>
 ITEM: DROPDOWNBOX_3
</object></TD>
 <TD vAlign=top><object>
 <param name="OWNER" value="SAP_BW"/>
 <param name="CMD" value="GET_ITEM"/>
 <param name="NAME" value="DROPDOWNBOX_4"/>
 <param name="ITEM_CLASS" value="CL_RSR_WWW_ITEM_FILTER_DDOWN"/>
 <param name="DATA_PROVIDER" value="DATAPROVIDER_1"/>
 <param name="WIDTH" value="22"/>
 <param name="IOBJNM" value="0TCTQUERY"/>
 ITEM: DROPDOWNBOX_4
</object></TD></TR></TABLE>
<object>
 <param name="OWNER" value="SAP_BW"/>
 <param name="CMD" value="GET_ITEM"/>
 <param name="NAME" value="TABLE_1"/>
 <param name="ITEM_CLASS" value="CL_RSR_WWW_ITEM_GRID"/>
 <param name="DATA_PROVIDER" value="DATAPROVIDER_1"/>
 <param name="WIDTH" value="505"/>
 <param name="BORDER_STYLE" value="FORM"/>
 <param name="ALT_STYLES" value=""/>
 ITEM: TABLE_1
</object>
 
 
 
 
 
</body>
</html>

What is the difference between /6** wage types and /7** wgae types

Hi All,
Can you please tell me the difference between /6 & /7 wage types
and in what scenario /6 and /7 wage type amounts differ
Thanks in advance
Krishna

- /6XX - Gross wages less pre-tax deduction. For example, if salary is $1,000 and the 401(k) deduction is $200,/6xx will be $800. SAP passes this amount to BSI for tax calculation. (/EXX - Tip income processing)
- /7XX - Reportable taxable amount calculated by BSI. If ceilings on taxable amounts exist and are exceeded, BSI will return a reportable taxable amount of zero. (/FXX - tip income processing).
Arti

How to know the select stmt used in creating a table?

Hi,
If we create a table by selecting some records form another table, can we see the select statement used to create that table.
example: Create table emp2 as select * from emp where deptno=20;
is there any data dictionary table which stores select * from emp where deptno=20
Thanks in advance.
Edited by: 805791 on Jul 28, 2012 9:01 PM

No. The SELECT statement is not associated with the table in the data dictionary.
If the statement was executed recently, you may find the entire CREATE TABLE in the V$SQL view. Or, if you have licensed the AWR, you may find it in the DBA_HIST_SQLTEXT view. But there is no guarantee that the query will be in either view.
Justin
Edited by: Justin Cave on Jul 29, 2012 3:46 AM
Additionally, this question doesn't appear to relate to the Oracle Call Interface so it should probably have been asked in a different forum. The General Questions forum or the SQL and PL/SQL forum would have been more appropriate.

How to identify the data mismatch between inventory cube and tables?

Hi experts,
i have a scenario like how to identify the data mismatch between 0IC_C03 and tables,and what are the steps to follow for avoiding the data mismatch

Hi
U can use data reconcilation method to check the consistency of data between the r/3 and bw. Plz check the below link
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a0931642-1805-2e10-01ad-a4fbec8461da?QuickLink=index&overridelayout=true
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/d08ce5cd-3db7-2c10-ddaf-b13353ad3489
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/7a5ee147-0501-0010-0a9d-f7abcba36b14?QuickLink=index&overridelayout=true
Thanx & Regards,
RaviChandra

How to compare the variances of production order type and get report

Hello All,
I want to compare the variances of production order type wise.
for ex. i want variances of order type PP 01 and PP 02 in a single report.

Hi Sachin,
You have to maintain summarization hierarchies to achieve this.
1. Maintain summarization hierachies with hierarchy level - order type in the t.code.KKR0
2. Generate the hierarchy in KKRC
3. Run the report KKBC_HOE
Regards,
Mukthar

How to Know the changes made on a program and complete activity on it

Hi abapers,
I want to know who is working on a particular report currently and check the complete activity like changes made on the report.
Is there any transaction to check this, please let me know
Thanks in advance
Bond

Hi,
See also this help on version management
http://help.sap.com/saphelp_nw2004s/helpdata/en/57/38e0fb4eb711d182bf0000e829fbfe/frameset.htm
Eddy
PS.
Did you (and your colleagues) put yourself on the SDN world map already? Pls check
/people/eddy.declercq/blog/2006/06/14/from-the-grumpy-old-man-hoy-en-el-mundo
for details.

How to know the previous mozilla fire fox version and get restore it

i cannot download the video eventhough the add on is installed in the latest version so i want to restore the previous mozilla firefox version

You can download older versions of firefox from https://ftp.mozilla.org/pub/mozilla.org/firefox/releases/ . However, most problems are *not* from the new updates. The new updates are safer, but if you want to, the website is available.

How to know the technical name of psa

hi BW gurus,
I need to delete data from psa i need to increase the free space. so how to know the technical name of psa. and how to delete the data from psa.
Thanks in advance

Shahid,
Agree with Tarun on this...
Check the PSA technical name from the delete PSA option on the PSA screen of the AWB...the PSA name would be /bic/b000*...
Shahid...also chek the table RSTSODS in SE11.
U can find the PSA technical name in the field ODSNAME_TECH..
Just enter the name of the PSA in the ODSNAME field..the PSA name would be
your infosource followed by some extension.
Deleting the data from the PSA:
Shahid,
this can be achieved via a program and also via the standard procedure of going to the PSA in the AWB and choosing the option delete the PSA data...
Here select the requests which are older than any number of days or before any date..
Hope this helps...
Regs.
Nick.
Message was edited by:
Nick

To know the user has roles for developer and administrator

Hi,
How to know the user id has roles SAP_XI_DEVELOPER and SAP_XI_ADMINISTRATOR?
Thanks.

Hi,
Go to SE38. Execute report RSUSR002.
Enter the role SAP_XI_DEVELOPER and execute.
You will find out the list of users with the above role.
Your question was a little confusing. If you meant something else let us know.
Regards,
Sumit
Edited by: Sumit Khetawat on Jan 3, 2008 2:10 PM

How to know the dynamic values for this :AND category_id_query IN (1, :3, )

Hi Team,
R12 Instance :
Oracle Installed Base Agent User Responsibility --> Item Instances -->
Item Instance: Item Instances > View : Item Instance : xxxxx> Contracts : Item Instance : xxxxx> Service Contract: xxxxx>
In the above page there are two table regions.
Notes.
-------------------------------------Table Region---------------------------
Attachments
-------------------------------------Table Region---------------------------
--the attachments are shown using the query from the fnd_lobs and fnd_docs etc...
I want to know what are the document types are displayed in this page ?
--We developed a custom program to attach the attachments to the services contracts and the above seeded OAF page displays those ..as needed.
But after recent changes..the Attachments--> table region is not showing the attachments.
I have verified the query..and could not find any clue in that..
but i need some help if you guys can provide..
SELECT *
FROM
*(SELECT d.DOCUMENT_ID,*
d.DATATYPE_ID,
d.DATATYPE_NAME,
d.DESCRIPTION,
DECODE(d.FILE_NAME, NULL,
*(SELECT message_text*
FROM fnd_new_messages
WHERE message_name = 'FND_UNDEFINED'
AND application_id = 0
AND language_code = userenv('LANG')
*), d.FILE_NAME)FileName,*
d.MEDIA_ID,
d.CATEGORY_ID,
d.DM_NODE,
d.DM_FOLDER_PATH,
d.DM_TYPE,
d.DM_DOCUMENT_ID,
d.DM_VERSION_NUMBER,
ad.ATTACHED_DOCUMENT_ID,
ad.ENTITY_NAME,
ad.PK1_VALUE,
ad.PK2_VALUE,
ad.PK3_VALUE,
ad.PK4_VALUE,
ad.PK5_VALUE,
d.usage_type,
d.security_type,
d.security_id,
ad.category_id attachment_catgeory_id,
ad.status,
d.storage_type,
d.image_type,
d.START_DATE_ACTIVE,
d.END_DATE_ACTIVE,
d.REQUEST_ID,
d.PROGRAM_APPLICATION_ID,
d.PROGRAM_ID,
d.category_description,
d.publish_flag,
DECODE(ad.category_id, NULL, d.category_id, ad.category_id) category_id_query,
d.URL,
d.TITLE
FROM FND_DOCUMENTS_VL d,
FND_ATTACHED_DOCUMENTS ad
WHERE d.DOCUMENT_ID = ad.DOCUMENT_ID
*) QRSLT*
WHERE ((entity_name    ='OKC_K_HEADERS_V'-- :1
AND pk1_value          IN ( 600144,599046) --:2
AND category_id_query IN (1, :3, :4, :5, :6, :7) )
AND datatype_id       IN (6,2,1,5)
AND (SECURITY_TYPE     =4
OR PUBLISH_FLAG        ='Y')))
--='000180931' -- 'ADP118'
The above seeded query is the one which is used for table region to retrieve the data..
how to know the dynamic values for this : AND category_id_query IN (1, :3, :4, :5, :6, :7) )
--Sridhar

Hi Patricia,
is it working for restricted key figure and calculated key figure ??
Note Number Fisc Period Opening Days
1 1 2
2 1 3
3 1 0
because I have other restriction, so I create two restricted key figure..
RK1 with restriction : Total Number of Note,
RK2 with restriction : Total Opening Days ,
then I Created a calculated key figure, average opening days in a period
CK1 = RK2 / RK1..
in this case, I am not sure if it will work or not..
for example, during RK2 calclation, it might be this   2+3 = 5, the line with 0 will be ignored..
during RK1 calcualtion, it might be 1 + 1 + 1 = 3. ---> Not sure in this case, the line with opening days 0 will be calculated or not..
could you please confirm..

With a contract number, how to know the total PO release value against it?

Usually one contract corresponds to multiple PO records, now we know the contract number, then how to know the total PO release value against this contract. In other word, we would like to know the total release value of all the POs with the same contract number. To just input the contract number in EKPO table? but then look for which field in this table to add these PO release values up?
We will give you reward points!
Thanks!

hi Mohammad,
By following your instruction, input the contract number 4800000112 into Document number field, then hit Enter, get the following (only copy two records here for example), but kind of a mess. Could you let us know which one is the PO release value for this contract?
Contract   Type Vendor     Name                                 PGp Agmt. date
Item Material           Short text                               Mat. group
D I A Plnt SLoc                 Targ.qty. Un       Net price Curr.   per Un
4800000112 WK   2000012012 GULF INTERSTATE FIELD SERVICES       QBH 06/20/2006
Agreement start06/20/2006 Agreement end 12/31/2007
Tgt. val.        1,000,000.00 USD   Open          1,000,000.00 USD   100.00 %
00001                    Inspection Svcs, Construction            R3VNI
L   U                                  0 UL            0.00 USD       1 EA
00002                    Chief Inspector                          R3VNI
L   U                                  0 DAY         390.00 USD       1 DAY

How to know the balance and validity of internet data in iPad

How to know the balance and validity of internet data in iPad?

Sir I m using internet in ipad4 with airtel network
They provide me 2gb data with the amount of 255 rupees
And now I inserted the sim in my ipad4
And start the surfing on safari n all
And now I wanted to know how much data is balance.

How to know the class method behind an enterprise service

Hi,
SAP has provided enterprise services for Room booking in Real Estate module. They are even shipping the complete application for a nominal price. But the standard version is not suitable for our client requirement so they want to develop this application inhouse.
Now my question is: I know the enterprise services used in this application. How to know the implementing methods behind these enterprise services ?
If possible suggest which approach will be a better option for the inhouse development.
1. Webdynpro ABAP and use directly methods behind the enterprise services.
2. Webdynpro ABAP and create client proxy class for the enterprise services.
3. Webdynpro JAVA and use the enterprise services.
4. Using visual composer modelling the application.
Please suggest the best alternative.
Best Regards,
Aleem Mohiuddin.

Hi
They are even shipping the complete application for a nominal price. But the standard version is not suitable for our client requirement so they want to develop this application inhouse.
I assume you are talking about xApps.
How to know the implementing methods behind these enterprise services ?
In sproxy transaction you can search service and then you can see class and method implemented behind that particular service.
1. Webdynpro ABAP and use directly methods behind the enterprise services.
In my opinion not recommended to bypass ES and use method behind it.
2. Webdynpro ABAP and create client proxy class for the enterprise services.
Not sure why you want to create proxy of ES.
3. Webdynpro JAVA and use the enterprise services.
4. Using visual composer modelling the application.
You can use either Webdynpro (ABAP or Java) or VC to model your application which consume ES in backend. Both options are good, you can chose Java or ABAP flavor of dynpro based on skill available in team. VC is very effective in rapid modelling and can be used in protyping or in development of complete application.
Regards,
Gourav

How to know the error in the goods movement

Hai gurus,
a) while doing goods issue and goods receipt , if there is any
error in the goods movement how to know the same and correct it.
Regards,
sekar chand

Hi,
If You are doing GR and GI during order confirmation then you will find a tab for Display Error(Bell Ikon).At the time of any error you will find this icon highlighted.press it you will find details error description and proposed solution.
Regards,
Dhaval

How to know the Infotype of a wage type and table ARRRS trigering ?

Similar Messages

Maybe you are looking for