How to know the number of children at the first visit of a view ?

Hello,
I'd like to make a modification to the JSF lifecycle so that when a view is first visited, it is possible to know the number of children before the RenderResponse phase.
It seems that, following the RI source code, the dispatch method of the ExternalContext is called.
This method calls itself the RequestDispatcher of the javax.servlet package.
How can I do that ?
Thanks in advance.
bgOnline

I've been here all the time, ever since I got my G4 and could finally OS X (started with 10.1.5). Don't know how ya coulda missed me.... I'm usually in the Using the OS Forum and the Finder forum, with occasionaly excursions in the Spotlight forum.
BTW, so this isn't completely off topic, after getting frustrated by the file count and Finder displaying correct sizes I experimented with a couple of Applescripts but then found a wonderful little Contextual Menu item, CalculateSize:
http://www.pixture.com/software/macosx.php
It tells you not only the number of files and sub-folders in a given folder, it also tells you the number of invisibles of each and the total size of the items, and it calculates sizes ever so much faster than the Finder does.
Francine
Francine
Schwieder

Similar Messages

  • How to get customer number and name from the SD document

    Hi All,
    Can you please let me know how to get Customer Number and Name from the SD Document?
    Thanks a lot....
    Anil

    Hi,
    It will be displayed in the SD (BIlling document) itself,  you clikc on the VF03. The customer name and number will also appear in the SO document also Tcode VA03
    regards,
    radhika
    Edited by: kolipara radhika on Jul 10, 2009 5:32 AM

  • HT3696 How to know if your mac is using the latest Haswell architecture processor or not? and how to know the difference between the new imac and the 2012/13 imac?

    How to know if your mac is using the latest Haswell architecture processor or not? and how to know the difference between the new imac and the 2012/13 imac?

    Sorry to reopen an old post, but I've just purchased a 2nd hand late-2013 iMac (or so thats what the seller said).
    I'm always sceptical though, and just wanted to know if there is a way to check if my iMac is indeed the late-2013 model that included Haswell?
    I've attached screenshots of the About This Mac section hoping it may help shed some light.
    Thank you in advance for your help!
    PS - I can't compare to the iMac specs link you posted above because its now showing the late-2014 models.
    <Image Edited by Host to Remove Serial Number>

  • How, using Adobe Connect can increase the number of participants in the meeting? I need more than 25 people.

    Hi, I use licensed Adobe Connect. Earlier in the meeting could involve up to 100 people. Now only 25. How, using Adobe Connect can increase the number of participants in the meeting? I need more than 25 people.
    Thanks for your help.

    The purchasing option through adobe.com only allows up to 25 attendees. If you need more than that, you will need to purchase through a reseller. You can find one that is able to sell in your part of the world, here: Adobe Connect Partners. Just reach out to one of the Global Partners.

  • When i send a imessage it sends it from the number that was on the sim before i transfered my number how do i change it to my number?

    when i send a imessage it sends it from the number that was on the sim before i transfered my number how do i change it to my number?
    ive tried to change it in message settings but the number is grey so im unable to de-select it ?
    any ideas?
    cheers Dan

    Hello joinerdan,
    It sounds like you are unable to change the phone number that Messages is sending messages from because it is grayed out. I recommend the steps outlined in the following article named:
    iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
    http://support.apple.com/kb/HT5538
    Unlink a phone number
    To remove a phone number from an Apple ID, sign out of FaceTime and Messages on your iPhone:
    Settings > Messages > Send & Receive. Tap your Apple ID, then tap Sign Out.
    Settings > FaceTime. Tap your Apple ID, then tap Sign Out.
    This should remove your phone number from other devices using the same Apple ID with FaceTime and Messages. If the phone number is still available on other devices after you sign out of FaceTime and iMessage on the iPhone, you may need to sign out of iMessage and FaceTime on all your devices, then sign in to FaceTime and Messages again on devices you want to use.
    Note: If you no longer have access to the iPhone that is using the number you want to remove, reset your Apple ID password.
    Thank you for using Apple Support Communities.
    All the best,
    Sterling

  • In i photo11,how do I change the number of thumbnails in the rows?

    In I photo 11, how do I change the number of thumbnails in the rows?  I now have 5 large thumbs across, but
    I would like to have 10 or 12  normal sized thumbnails in each of the rows.  Thanks

    tab --
    Here's where to read up on your question.
    If you don't find your answer, post a new topic there:
    https://discussions.apple.com/community/ilife/iphoto

  • How can I view the number of tunes in the Library? The number shows for Playlists but not for the total Library.

    How can I view the number of tunes in the Library? The number shows for Playlists but not for the total Library.

    Hello,
    I apologize for submitting this question.  Soon after I posted it I saw a similar question that had my answer..
    Again, my bad for not looking first.
    Ron Morris

  • How to control the number of fields in the Advanced mode in af:query

    Hi,
    How to control the number of fields in the Advanced mode in <af:query>?
    Say i have 20 fields in my table and i created a view criteria with 2 fields. It would work perfectly in Basic mode. But in the Advanced mode all other fields selection is possible on clicking the ADD Fields button. I did not want the client to make a search with all 20 fields. Only 10 fields are to be listed in the Advanced Mode even though there are 20 fields in my table.
    How do i control the list of fields in ADDFields button?
    Any ideas?
    KR

    You can uncheck the Querable property of the attributes which you need not show up in the Advanced Mode (but they will not show up in other modes too !) or programatically set the same as mentioned here -
    http://adfcodebits.blogspot.com/2010/11/bit-27-setting-view-object-attributes.htmlAlso you can hide the AddFields button as suggested here - http://www.notjustjava.com/2011/12/cool-tips-to-showhide-components-of-the-query-control-of-adf/

  • How do I configure the number of connection in the pool for webservice axis

    Hi
    How do I configure the number of connection in the pool using xml.
    We are using axis 1.4 and commons-httpclient-3.0.1Is there any way we can do it using the client-config.wsdd file.
    We do not want to do any modification in the code for this.
    Is it possible to set socket timeout also in the wsdd file.
    Your resolution will be really helpful for us.
    Thank You
    Ottran

    Export them at a smaller size:
    File -> Export - not the options at 'Size'
    Regards
    TD

  • Updating my iPhone 5 software has shortened the number of rings before the answer phone kicks in, how do I extend the time delay?

    Updating my iPhone 5 software has shortened the number of rings before the answer phone kicks in, how do I extend the time delay?

    If the codes Tanzim mentioned don't work, just call your carrier and ask them to extend your time until voicemail picks up, to 30 seconds. They do this routinely.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • HT4515 how do I set the number of rings before the caller goes to voice mail ?

    How do i set the number of rings before the coller goes to voice mail on my iphone?
    Thanks you.

    Determined by your carrier, so contact them.

  • How do you adjust the number of rings before the incoming call goes into voicemail?

    How do you adjust the number of rings on the iphone before the incoming call goes into voicemail?

    Set by your carrier, so contact them.

  • In my numbers when I click on a cell it shows the formula but what I want ot see is the number I input inot the cell.  what did I do and how can I change it?

    In Numbers, when I click on a cell I see the formula, how do I see the number I input inot the cell?

    Gerald,
    A cell either contains:
    1) what you typed (or entered) OR
    2) the result of a formula
    to enter a formula, select a cell, then type the "=" sign then the formula, then enter
    to enter a number oer text, then type the number(s) or text you want, then the enter key
    the contents of a cell is the last thing you typed into that cell.  If there was a formula, then selecting the cell and typing will result in losing the formula.
    B3 will change as you modify the cell contents in B1 and B2

  • I wanted to know why they call me when I do not show the number but I get the words private number, and even when I call out to another private number.

    I wanted to know why they call me when I do not show the number but I get the words private number, and even when I call out to another private number.I tried it in the settings to activate id shows but nothing has changed. I hope you can help me.

    Cloud programs do not use serial numbers... you log in to your paid Cloud account to download & install & activate... you MAY need to log out of the Cloud and restart your computer and log back in to the Cloud for things to work
    Some general information for a Cloud subscription
    Log out of your Cloud account... Restart your computer... Log in to your paid Cloud account
    -Sign in help http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html
    -http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html
    -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
    -http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html
    Does your Cloud subscription properly show on your account page?
    If you have more than one email, are you sure you are using the correct Adobe ID?
    https://www.adobe.com/account.html for subscriptions on your Adobe page

  • How to set the number of rings for the agent phone rings before it get the not prepared state

    hi, how to set the number of rings for the agent phone rings?  before it get the not prepared state.
    thanks

    The following assumes that you are using ICM with an IPIVR etc (not using CVP), as the answer is different for CVP
    What you are looking for is called "Ring no answer time".  It is set in the Agent Desk Setting List tool.
    Regards,
    Kevin

Maybe you are looking for

  • Avoid creation of log file for external table

    Hi This script is creating log file in the ext directory. How to avoid it. Can you specify the syntex. Thanks alot. Bhaskar CREATE TABLE datfiles_list (file_name varchar2(255)) ORGANIZATION EXTERNAL (TYPE ORACLE_LOADER DEFAULT DIRECTORY ext_dir ACCES

  • Photos disappear in library after giving some 1 star rating, LR 2.1

    I imported 3 folders of Nikon NEF images with corresponding xmp files, which were previously created in Bridge CS3. NEF files are from last year, from Nikon D200. All 9786 seemed to appear in Library. I then went to Loupe view, and rated some 300 or

  • "Microsoft Outlook Not Installed" error message

    I attempted to sync my calendar to my 80GB iPod classic but there's a problem, it can't seem to acknowledge the existence of Outlook on my computer. I suppose that could be because I don't technically have outlook on my computer. I have windows mail

  • How to adjust a "control array" size

    I have a program that creates a digital PWM signal with variable duty cycle. The duty cycle changes every 50 ms, but the overall wave frequency stays at a frequency determined by the user. I have the VI attatched. My problem is this...I need to be ab

  • Getting error:  *cannot check out a record*  in URM

    We have recently implemented URM and it seems to be working fine as far as checking in records and the dispositions working. The problem occurs if someone tries to check out a record. An error comes up saying that a record cannot be checked out. Am I