How to know the part number of a cisco device

Hi Guys,
We often feel the need to know the part number of a line card and we use the show diag command. To find out the exact part number of a device check out the below article. Its really a very useful tip.
http://knowurtech.com/cisco/finding_part_number_of_cisco_devices.html
Best Regards
Dinesh

Hi,
Thanks a lot. That was useful info.
Best Regards
Dinesh

Similar Messages

Does anyone know the part number for the printhead for the HP Officejet 6500a

My printer doesn't print, initally it didn't print black, then I soaked the printhead in hot water as instructed now it doesn't print at all, so I need to replace it. Does anyone know the part number for the printhead for the HP Officejet 6500aThank You,

Hi Temprosal,I looked up the product specifications for the HP Officjet 6500a.Here are steps for ordering a new printhead: These steps apply to the United States only.If HP replaces your printhead assembly under warranty, you receive a new printhead assembly, cleaning materials, and a full set of new ink cartridges.If your printhead assembly is no longer under warranty, you can purchase a new one online.Go to the HP Parts Store website (in English). https://h20141.www2.hp.com/Hpparts/CountryChoice.aspxUnder Find your part(s), type CN643A in the Search by part number text box.Follow the on-screen instructions to order the printhead assembly.Jean

I know the personal number. How to know the address number on ADR* tables ?

Hello,
I know the personal number. How to know the address number on ADR* tables ?
I need some information from ADR2 and ADR6 and I know the personal number (on PA30 transaction ).
There's some MF or we can do it by some table ?
Tks.

Hi
You can get the user name from PA0002 passing personal number.
If you know user name you can go to USR21 table, enter login name and get ADDRNUMBER value.
Regards
Yossi Rozenberg

How to know the project number through milestone number ?

Hi Expert,
How to know the project number through milestone number ?
BR / Shubin

Hi,
I am not sure if there is any standard report which will have Milestone in the selection screen, before executing the report. However you can give a range of projects in CN53N/CN53 and check which milestones are associated with which project.
Best Regards,
Gokul

Hi there. My iPod Nano was stolen from my car today. I do know the serial number of this stolen device. Is there any way that Apple can block another user from connecting this stolen device to iTunes?

Hi there. My iPod Nano was stolen from my car today. I do know the serial number of this stolen device. Is there any way that Apple can block another user from connecting this stolen device to iTunes? Also, if another user was to attempt to connect this stolen device to iTunes, would Apple be able to inform of the username of this person in order that I could then pass this information to the police?

Is there any way that Apple can block another user from connecting this stolen device to iTunes?
No.
Also, if another user was to attempt to connect this stolen device to iTunes, would Apple be able to inform of the username of this person in order that I could then pass this information to the police?
No. Apple can do nothing to help. Sorry.
Reporting a lost or stolen Apple product
B-rock

HT204053 How to learn the IMEI number/s (for more devices usine the same ID) by my Apple ID?

How can I learn the IMEI number/s (for more devices usine the same ID) by my Apple ID?

The app should locate both phones if they are using the same iCloud account and the app is signed into the account. If they are using different account, sign out, then sign back in with the other account to track the other phone.
If one of them isn't showing and you're signed into the correct iCloud account, go to Settings>iCloud on the phone in question and turn Find My iPhone Off, then back On.

How to know the port number to which the server process is listening

I have created oracle 10g Release 1 database(orcl) in Windows Xp Professional edition through DBCA . I also created one more database(sample) manually .
The ORCL server process listens to port no 1521 and
SAMPLE server process listens to port no 1522
Once I start the OracleServiceORCL (Service for orcl) from services.msc and check the listener status it displays
Service "orcl" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
But when I start OracleServiceSAMPLE (Service for sample) from services.exe and check the listener status there is no change . Only when i start the instance the dynamic registration takes place with port no 1521 .
There is no entry for listener parameter in init.ora file . My question is how is the service ORCL able to get itself registered with the listener even before the instance is up ?
And how can i know which port no is linked with which server process?
Also if we provide a different port number(other than 1521 say 1522) in tnsnames.ora for a service and consider the listener is listening to both 1521 and 1522 . Now consider that port number 1521 is free . In this case to which port number will the service be listening to ?
The listener file looks like this
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = D:\oracle\product\10.1.0\Db_2)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = irobo)(PORT = 1521))
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = irobo)(PORT = 1522))
The tnsnames file has the following entry
ORCL =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = irobo)(PORT = 1522))
(CONNECT_DATA =
(SERVICE_NAME = ORCL)
SAMPLE =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = irobo)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = ORCL)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
)

Service "orcl" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...[coe]
The status tells you the instance is up. Starting the service often means the instance gets started also, but whatever "often" means, "READY" means "The instance is up, running and taking callers".
Your statement that "ORCL [is] able to get itself registered with the listener even before the instance is up" is therefore factually incorrect: you started the service, that started the instance. The instance is up and running. Instances that aren't running don't exist. Things which don't exist don't register themselves. Things which HAVE registered themselves therefore do exist.. and if they say they are "ready", it means they are completely, 100% up and running and behaving quite normally.
I have not set LOCAL_LISTENER initialization parameter.How is this happening ?
You only need to set LOCAL_LISTENER if (a) you're not using TCP/IP, (b) you're not using port 1521. Otherwise, PMON is hard-coded to register itself with listeners running on port 1521 and using TCP/IP and you don't need to set LOCAL_LISTENER to achieve that.
Server Processes do not listen. Listeners do (there's a clue in their name). Listeners receive a call to connect to an instance, they spawn a server process to handle your call, and then they connect you to that server process (or send a message back to you telling you how to contact the server process). Each server process of course receives communications from its dedicated client on a specific port (usually in the 50000+ range), and that port is chosen randomly by the listener when it's spawning it. It's a bit blurry and vague to call that server process port a port on which server processes "listen", however.
If you're talking dedicated server, each client causes one new server process to be spawned, and there is a one-to-one correspondence between server processes and the port that server process happens to accept client communications on.
If you're going to ask a listener to do listening duty on multiple ports, I'd first question your need to do that and I'd then point out that unless your client tnsnames.ora knows to talk on the second or subsequent port numbers, the listener is never actually going to make use of that second port.
In either case, the port the listener listens on has nothing whatsoever to do with the port your client-to-server-process communication ends up taking place on.

How to know the midp version of a mobile device

hi,
i'm new on programming with midp, and i wanted to know if there is a way (a function) to know the version of the midp in a mobile?
thanks for your answers

<h2>{color:red}CROSS POSTED{color}</h2>after being answered in
[http://forum.java.sun.com/thread.jspa?threadID=5289012]
Cross posting is rude. Please don't do it again.
db

How to get the partition number of a disk device

Hi,
I would like to check , given a path to a disk device ,its partition number,
I don't want to do it through the path since then I will have problems with filesystem links and filter drivers.
I would like to do it through ioctl calls to the device.
the ioctl DKIOCPARTINFO isnt supported by all device drivers.
does anyone know how to do this ?

U can open the device and issue the following ioctls
DKIOCGGEOM, DKIOCGVTOC, DKIOCINFO.
See man dkio

I need to know what the part number is for a replacment hard drive chasis - 8460p

I need to order a replacment chassis that the hard drive screws into for the 8460p, does anybody know the part number for this piece?

Hi:
You are going to have to contact HP for that--1-800-334-5144.
The only parts listed in the service manual are for the actual hard drives.
Paul

What is the part number of MB of Satellite A300-1L0 PSAGCE

Hi
I've got Toshiba A300-1L0 Model NO.PSAGCE-03100UGR.
But there is a problem with graphic adapter ATI 3450 (M82 chipset). After installing proper drivers I got blue screen when Windows starts - and it is written that file ati2....dll gives the problem. The same situation happens both on Windows XP and VISTA.
What is the part number of mentioned notebook mainboard? I'm planning of selling every part of this notebook that is why I would like to know the part number.

Hi
Not sure exactly if the part number is the same but the PT10G_6050A2171501_MB_A03 motherboard is compatible with Satellite A300-1QD, A300-1GC and A300-1L0
But I dont know why the part number is so important you can describe the motherboard as a mobo for Satellite A300 PSAGCE series.
There are different Satellite A300-xxx which belongs to the PSAGCE family and this motherboard would be compatible with all these notebooks

Sony CFD S300. What is the part number for the optical pick up? How do you replace the optical pick

Hi. Apparently none of the links work on the sony site for this product (Sony CFD S300 CD Radio Cassette Recorder). Does anyone know what the part number is for the optical pick up (laser)? They have them on eay for around $10 but i do not know which one to get. Also anyone have directions on how to replace it? There is a soder ball somewhere too. Thanks!!

Hi LifelongCamper,
There are two Optical pickups available for the CD player. Part #s of the Optical pickups for this CD player are 882016102 and 884848312. You can purchase “882016102” from below provided link:
https://servicesales.sel.sony.com/ecom/accessories/web/shoppingCart.do?operation=addToCart&itemId=12...
Instructions to replace internal parts of the CD player are not made available to end users.

With a contract number, how to know the total PO release value against it?

Usually one contract corresponds to multiple PO records, now we know the contract number, then how to know the total PO release value against this contract. In other word, we would like to know the total release value of all the POs with the same contract number. To just input the contract number in EKPO table? but then look for which field in this table to add these PO release values up?
We will give you reward points!
Thanks!

hi Mohammad,
By following your instruction, input the contract number 4800000112 into Document number field, then hit Enter, get the following (only copy two records here for example), but kind of a mess. Could you let us know which one is the PO release value for this contract?
Contract   Type Vendor     Name                                 PGp Agmt. date
Item Material           Short text                               Mat. group
D I A Plnt SLoc                 Targ.qty. Un       Net price Curr.   per Un
4800000112 WK   2000012012 GULF INTERSTATE FIELD SERVICES       QBH 06/20/2006
Agreement start06/20/2006 Agreement end 12/31/2007
Tgt. val.        1,000,000.00 USD   Open          1,000,000.00 USD   100.00 %
00001                    Inspection Svcs, Construction            R3VNI
L   U                                  0 UL            0.00 USD       1 EA
00002                    Chief Inspector                          R3VNI
L   U                                  0 DAY         390.00 USD       1 DAY

How to know the total page number of the standard report

How to know the total page number of the standard report?
If I insert a graph, a table, or text into the end of the standard report, how to know how much space is left for the current page?

Hello Net,
Unfortunately, we do not have any VIs in LabVIEW that can figure out the number of pages of a standard report. However, with the use of ActiveX calls you can achieve this task. Here are a couple of discussion forums which discuss this:
Excel Page Numbering with ActiveX:
http://forums.ni.com/ni/board/message?board.id=170&message.id=194479&requireLogin=False
Number Pages in Word Report:
http://forums.ni.com/ni/board/message?board.id=170&message.id=162972&requireLogin=False
There is also great documentation on using ActiveX on msdn. You can search this document for page number objects. Here is a link to this:
http://msdn2.microsoft.com/en-us/library/aa223048(office.11).aspx
Please refer to these links. If you still have questions please feel free to let us know so we can assist you.
Thank you
Best Regards,
Dominic L.

HT4061 hey my phone been stolen and I don't know the IMEL number how can I get it?

hey my phone been stolen and I don't know the IMEL number how can I get it?

from your carrier would be a start.

How to know the part number of a cisco device

Similar Messages

Maybe you are looking for