How to know the sampling rate for NI6624?

Dears,
I am trying to measure a transient signal that is a time-vary counter train. The target frequency is increased from 0 Hz to 50 Hz when the measurement time rises to 1 s from 0 s. The NI 6624 card and the LabVIEW DAQmx have been adopted. In the block diagram, the terminal of measurement method “Low Frequency with 1 Counter” is set in “DAQmx Create Channel (CI-Frequency).vi”, and the “Finite Samples” mode is chosen in “DAQmx Timing (Implicit).vi”. Then the transient signal points (increasing-frequency points) will be got successfully within 1 s. Now I have a question: how do I estimate the time step “dt” between these data points? Knowing the default sampling rate of the card seems a better way to help me to define the "dt", and calculates the time stamp at each data point. If the foregoing concept is true, how the internal sampling rate in NI6624 obtains? Beside, for the transient counter signal, any way to get the time stamp of data points is also welcome.
Thanks for anyone comment,
Adan

Adan,
When selecting "Implicit" as the DAQmx Timing type, you are indicating
that a data point will be taken for every measurement the counter
performs. When you create a task of type "Low Frequency with 1
Counter," the counter simply uses the card's internal timebase to
measure the period between edges of your signal. It then takes this
period measurement and converts it to a frequency. Therefore, the
spacing between the samples you read out is simply the inverse of the
subsequent frequency measurement sample.
Hope this helps,
Ryan Verret
Product Marketing Engineer
Signal Generators
National Instruments

Similar Messages

How to know the dynamic values for this :AND category_id_query IN (1, :3, )

Hi Team,
R12 Instance :
Oracle Installed Base Agent User Responsibility --> Item Instances -->
Item Instance: Item Instances > View : Item Instance : xxxxx> Contracts : Item Instance : xxxxx> Service Contract: xxxxx>
In the above page there are two table regions.
Notes.
-------------------------------------Table Region---------------------------
Attachments
-------------------------------------Table Region---------------------------
--the attachments are shown using the query from the fnd_lobs and fnd_docs etc...
I want to know what are the document types are displayed in this page ?
--We developed a custom program to attach the attachments to the services contracts and the above seeded OAF page displays those ..as needed.
But after recent changes..the Attachments--> table region is not showing the attachments.
I have verified the query..and could not find any clue in that..
but i need some help if you guys can provide..
SELECT *
FROM
*(SELECT d.DOCUMENT_ID,*
d.DATATYPE_ID,
d.DATATYPE_NAME,
d.DESCRIPTION,
DECODE(d.FILE_NAME, NULL,
*(SELECT message_text*
FROM fnd_new_messages
WHERE message_name = 'FND_UNDEFINED'
AND application_id = 0
AND language_code = userenv('LANG')
*), d.FILE_NAME)FileName,*
d.MEDIA_ID,
d.CATEGORY_ID,
d.DM_NODE,
d.DM_FOLDER_PATH,
d.DM_TYPE,
d.DM_DOCUMENT_ID,
d.DM_VERSION_NUMBER,
ad.ATTACHED_DOCUMENT_ID,
ad.ENTITY_NAME,
ad.PK1_VALUE,
ad.PK2_VALUE,
ad.PK3_VALUE,
ad.PK4_VALUE,
ad.PK5_VALUE,
d.usage_type,
d.security_type,
d.security_id,
ad.category_id attachment_catgeory_id,
ad.status,
d.storage_type,
d.image_type,
d.START_DATE_ACTIVE,
d.END_DATE_ACTIVE,
d.REQUEST_ID,
d.PROGRAM_APPLICATION_ID,
d.PROGRAM_ID,
d.category_description,
d.publish_flag,
DECODE(ad.category_id, NULL, d.category_id, ad.category_id) category_id_query,
d.URL,
d.TITLE
FROM FND_DOCUMENTS_VL d,
FND_ATTACHED_DOCUMENTS ad
WHERE d.DOCUMENT_ID = ad.DOCUMENT_ID
*) QRSLT*
WHERE ((entity_name    ='OKC_K_HEADERS_V'-- :1
AND pk1_value          IN ( 600144,599046) --:2
AND category_id_query IN (1, :3, :4, :5, :6, :7) )
AND datatype_id       IN (6,2,1,5)
AND (SECURITY_TYPE     =4
OR PUBLISH_FLAG        ='Y')))
--='000180931' -- 'ADP118'
The above seeded query is the one which is used for table region to retrieve the data..
how to know the dynamic values for this : AND category_id_query IN (1, :3, :4, :5, :6, :7) )
--Sridhar

Hi Patricia,
is it working for restricted key figure and calculated key figure ??
Note Number Fisc Period Opening Days
1 1 2
2 1 3
3 1 0
because I have other restriction, so I create two restricted key figure..
RK1 with restriction : Total Number of Note,
RK2 with restriction : Total Opening Days ,
then I Created a calculated key figure, average opening days in a period
CK1 = RK2 / RK1..
in this case, I am not sure if it will work or not..
for example, during RK2 calclation, it might be this   2+3 = 5, the line with 0 will be ignored..
during RK1 calcualtion, it might be 1 + 1 + 1 = 3. ---> Not sure in this case, the line with opening days 0 will be calculated or not..
could you please confirm..

How to know the output type for particular tcode

Hi
how to know the output type for the VL10D & VAL TCODES.
Can anybody help me out.
Thanks and Regards
Krishnarao

Hi Krishna,
GO to NACE and select your application and click on output types and in the next screen select your output type and and dbl click on Processing routines.
Here you will come to know about which driver program is used for which smartform or Script.
and for Program details you can refer table: REPOSRC
Regards,
Sachin

I'm trying to record in Adobe Audition and it keeps saying my the sample rates for my input and output devices do not match. How do I correct this?

I'm trying to record in Audition and it keeps saying my sample rates for the input and output devices don't match. How do I fix this?

I finally have communication between the ISA One and Audition. I moved the optic cable to another SPDIF on the computer and from the SPDIF to ADAT on the ISA One and it finally agreed that the communication was at the same clock speed. The audio was not intelligible so I moved the optic cable back to the original configuration and I can record voice that is clean.

How to coerce the sampling rate??

I think I found my problem with sampling rate.
I'm using a PCI-5122 scope card, and in many of my aquisitions, I'm setting the sample rate to 40MS/s. Apparently, this is not a valid number and the scope reverts to 50 MS/s
Later when I try to calculate cycles per second based on cycles per sample, I need the actual sample rate, and 40 MS/s ain't it.
I'm trying to coerce sampling rate.
please,.

The digitizer coerces the sample rate because of how the sample clock is derrived from the Reference Clock. The following information is on page 13 of the specifications:
http://digital.ni.com/manuals.nsf/websearch/C6B059C1BDD70101862574C8005567F1
The sample clock is created by dividing down the Reference clock (internal reference clock is 100MS/s) by decimation, and it divides it by N, which is an integer between 2 and 65530.
Thus 50MS/s uses a decimation factor of 2, and 33.3MS/s is the next valid sample rate with a decimation factor of 3. So when you specify a sample rate that is not possible, the driver automatically coerces the requested sample rate up to the next valid rate. You can obtain the actual sample rate used in an acquisition using the NI-SCOPE property "Actual Sample Rate", or the LabVIEW VI "niScope Sample Rate.vi". Using this property, you can get the values you need for your calculations.
I hope this helps!
Nathan
Product Support Engineer
National Instruments

How to store the sampling rate into the header of the data file?

I want to store the data parameters such as sampling rate to the data file. Now I am using the Write Labview Measurement File VI, the data is saved, but like the sampling rate this kind of parameter is not in the file. How can I store this parameter?

If you want the sampling rate to appear in a different location of the header, then it and it's subVIs can be modified to write anyway you want. Right click on the Express VI and slect Open Front Panel. Then you have a VI that can be modified. If you want to use an unmodified Write LabVIEW Measurement File, you could use that, read the whole file back in with one of the file read functions, insert a string with the sampling rate and then write the whole thing back out again. It might be simpler though, to use Write Characters to File to create your own header and then use Write to Spreadsheet File to write the data. There is also the function Export Waveforms to Spreadsheet File on the Waveform>Waveform File I/O. This uses a slightly different format than a .lvm file. It too can be modified if you don't like the default header.

Why does the sampling rate for my DAQCard-700 max out at 6578Hz regardless of the number of channels I'm sampling?

My DAQCard-700 is acting funny. I am using LABView 6.0.2 on a Dell Inspiron 8100 laptop for continuous analog input. For some reason my DAQCard-700 won't let me acquire multiple channels unless I create virtual channels in max and then run AI Config with a list of the virtual channel names. That's fine (but weird), but I max out my sampling rate at 6578 Hz, which is the max sampling rate if I would have sampled all 16 (Referenced, single-ended) AI channels. But I'm not -- I'm sampling 6 channels, as proven by the "number of channels" indicator in AI config and just looking at my data. If I sample just one channel, I can get up to 105248Hz. Is my card f
ried, or am I missing a hidden setting somewhere? I have the latest NIDAQ.

Hello;
By the description of your problem, everything is pointing us to a hardware failure.
There aren't any tricks to acquire multiple channels with that card.
The best way to go about this is to have NI to fix the board for you.
Regards
Filipe

How to know the function module for a message type

hi sd gurus,
how can i know the function modules used ( based on message type can i know it?) in inbound idoc processing.
can anyone let me know where can i find it out and the related transaction codes
Thanks&Regards
Srini

You can find out the Functionmodule if you know the message type.
Go to WE20, find the message type for hte relevant partner type by clicking the partner type and then clicking one partner int hat partner type.
Now on the right hand side, you will get a screen. Based on whether it is your outbound IDOC or ibound, click the relevant parameters, select the message type and double click.
In the new screen open the Message control tab and fidn out the process code of the IDOC.
Now go to WE41 if ur IDOC is outbound or WE42 for inbound IDOC.
Search for the process code which is assigned to the message type in WE20.
Double click the process code, you will see the relevant function module in the 3rd field.
Hope thsi helps you
Pls reward if it helps.

[Q] How to set the sampling rate separately?

Hello,
I'm using LV5.1 in Windows98 with SCXI-1200.
I want to set different sampling rate in each input channel.
I've ever used "AI acquire waveforms.vi" only.
Anybody can help me?
Example codes are highly appreciated.
Regards,
Hyun-ho Lee
[email protected]

The inputs of the SCXI-1200 are multiplexed to a single Analog-to-Digital converter. Because of this, the only difference in sampling rates that are achievable would be integer divisions of a common high frequency. This is functionally identical to acquiring all channels at the highest rate, and decimating (throwing away) data from channels that need lower data rates.

How to know the Cluster name for Hyperion Planning Application

Hi,
We have 2 Hyperion planning clusters in our Planning environment. As per new requirement, we need to make the copy the existing planning application.
We are not able to get the defined cluster information for existing planning application.
Please help on how can we find the cluster name for a Hyperion Planning application.
Quick help will be appreciated!!
Thank You.
Mohit Jain

Hi John,
Thanks for your quick response!!
We tried to run this command on Planning system command. but it did not return any record. We found that table "HSPSYS_APP_CLUSTER_DTL" does not have any record.
is there any other way, where we can check the planning cluster name.
Please help on this further.
Thank You.
Mohit Jain

How to know the right value for SHMMAX and SHMALL for ia64 memory 32Gb

Dear all,
I want to install Oracle database 10g R2 on RHEL 5 ia64.
Here the server specification :
Proc : itanium64 ( montecito )
Mem : 32Gb
# getconf PAGE_SIZE = 16384
Metalink says, that SHMMAX should be half of physical memory and SHMALL = SHMMAX / PAGE_SIZE.
kernel.shmmax = 17179869184
kernel.shmall = 1048576
My Question is this is right value for SHMMAX and SHMALL on my server..??
Thank you

if shmmax is half the ram then what should be sga
sga size should anyhow should be less then shmmax ,means we cannot increase sga size more than half the ram
then how ROT for SGA that should be 70% of RAM hold good

How to know the table field for RMCLM- ANZRE

Hi experts,
I need to know table for structure field RMCLM - ANZRE.
In CL02, it indicates 'display relavent' for character.
Thanks in advance.
zak.

CABN-ATVIE. (look at OSS [Note 488831 - Relevance fields are missing|https://service.sap.com/sap/support/notes/488831] found by keyword ANZRE, in the correction you will find the "move")
Regards

How to know the source document for pasted page items

Hi,
I want to perform some actions on items before they are pasted (look at persistent data stored on the, if a conflict ask the user and either update or reject).
Believe I'm OK with the paste (document observer, in kBeforeDoMessageBoss where the change is kPasteCmdBoss, set global error code to kCancel to prevent the drop)
But... I can't think of any way to find the source document since the paste is from the scrap db. I've tried kCopyCmdBoss in the observer but that isn't hit (maybe I need to observe the scrap?).
Hope someone can help.
TIA Ian

I'm afraid there is no silver bullet.
Again: Copy - Paste is actually a two-step copy, from source doc to scrap, then from scrap to destination doc. Only few (other) copy operations go straight from doc1 to doc2.
Just assume the special case that the source doc is already closed and purged for the second copy, your data should by then already be decoupled and self-contained. Besides the user might never actually invoke Paste.
Until CS2 or CS3 there used to be a subject at the scrap root boss, then it was optimized away, so you can't use observers.
As already mentioned above, if you have to translate UIDs especially of your own custom boss class, you can use a reference converter to look up the equivalent object in the target db (by name or other criteria) or eventually create it, then provide the replacement UID.
There might be other means for special objects (text / PasteData, owned item) but I'd have to investigate them myself if I run into the need.

How to know the database tables for 0CUST_SALES_LKDH_HIER

Is there any way to find out the underlying data base tables for "0CUST_SALES_LKDH_HIER"?
In general where should I should go to check the underlying data base tables.

Table - KNVH - Customer Hierarchies
Easy ways first check for the datasources at http://help.sap.com/saphelp_nw2004s/helpdata/en/3d/5fb13cd0500255e10000000a114084/frameset.htm
If that really doesn't help you have to have a look at this Excellent blog by Roberto Negro : /people/sap.user72/blog/2005/09/05/sap-bw-and-business-content-datasources-in-pursuit-of-the-origins

What is the sample rate of voice memos?

I often record lectures via Evernote audio notes on my iTouch. I want to convert those audio files to text. A piece of software named, MacSpeech Scribe has caught my eye. A review states, "a minimum sampling rate of 11.025khz" is needed for the conversion.
Does anyone know the sampling rate of an iTouch audio note?
Thanks in advance.
DaverDee

ok i've figured out the physics of this question.
The Cache Read data rate is always larger than the Cache Write data rate, because the computer would have to be rendering to Cache faster than realtime for the Write rate to be higher, which would make it unnecessary to render to cache in the 1st place. So I'm really only worried about the Cache read data rate. Does adobe have a paper that tells us what the data rate is for different sequences.
my 3 common workflows are
canon h.264 1080 24p
AVChd 1080 24p from my GH2 with a 44mb
and
r3d 5k epic footage 24p - (this is painful to edit )
anyone know where this info is?
thx,
Jayson
youtube.com/AWDEfilms

How to know the sampling rate for NI6624?

Similar Messages

Maybe you are looking for