How to know the stake amount of both the won and lost opportunities

Hi,
I need to create a report.
I would like to have a chart related to the last year opportunities.
I would like to know in the same reports, the stake amount of the opportunities with the sales stage = Closed/Won, the stake amount of the opportunities Won + Lost (without the stake amount of the open opportunities).
And I would like to create a third field to calculate:
==> Stake Amount Won / (Stake Amount Won + Stake Amount Lost)
I create a formula inside the stake amount to put 0 if the sales stage <> closed/won and the real value of the stake
amount when the sales stage = closed/won. In my report I see the value "0" for opportunites <> Won but when I ask for the grand total, the system give me the results of the stake amount of all the opportunities.
Do you know how to design this report?
Regards,

Hi Venky
For the moment I can't create a formula for my needs. I'm going to try to use Union analysis.
I would like to make
- a first report which give me the stake amount *(1)* of all the opportunities with a sales stage=closed/won.
- a second report which give me the stake amount of all the opportunities *(2)* with a sales stage = closed/lost and closed/won
- a consolidated report where I can use the results of the 3 previous reports and make formula based on those results.
formula = *(1) / (2)*
Do you think it is possible to create formula based on the results of two reports?
Regards,

Similar Messages

  • I have about 1000 contacts on my iPhone 4 after syncing with iCloud there are only about 120 contacts on iCloud How can I have the same info on both the iCloud and my iPhone

    Hi
    I have about 1000 contacts on my iPhone 4 after syncing with iCloud there are only about 120 contacts on iCloud How can I have the same info on both the iCloud and my iPhone

    On the iPhone tap Settings > iCloud
    Switch Contacts off then back on then reset the device.
    Hold the On/Off Sleep/Wake button and the Home button down at the same time for at least ten seconds, until the Apple logo appears.

  • Last month I was 1 day late paying my bill, so I tried to pay the full amount.  But the website would only allow me to pay the current bill amount.  Now, I show a past due amount.  If I tried paying it and Verizon didn't allow me, how is it past due?

    Last month I was 1 day late paying my bill, so I tried to pay the full amount.  But the website would only allow me to pay the current bill amount.  Now, I show a past due amount.  If I tried paying it and Verizon didn't allow me, how is it past due?

    I'm confused - If I go online to pay my bill, and it's one day after the due date, the current bill and full amount due would be the same?  If the current bill is not the "full amount due", then what is the extra amount that's snow showing past due?
    Also, when I go in to pay my bill, I show the Current bill amount, total amount due (which are the same), and then a box where I can type in the amount I am paying, with the default amount being already filled in with the total amount. 
    Is this a pre-paid or a post-paid (contract) account?

  • How do I edit the contacts files on both my iPad and iPhone?

    How do I edit the contacts files on both my iPad and iPhone?

    Open Contacts, select a contact, then tap Edit in the upper right corner.

  • HT3696 How to know if your mac is using the latest Haswell architecture processor or not? and how to know the difference between the new imac and the 2012/13 imac?

    How to know if your mac is using the latest Haswell architecture processor or not? and how to know the difference between the new imac and the 2012/13 imac?

    Sorry to reopen an old post, but I've just purchased a 2nd hand late-2013 iMac (or so thats what the seller said).
    I'm always sceptical though, and just wanted to know if there is a way to check if my iMac is indeed the late-2013 model that included Haswell?
    I've attached screenshots of the About This Mac section hoping it may help shed some light.
    Thank you in advance for your help!
    PS - I can't compare to the iMac specs link you posted above because its now showing the late-2014 models.
    <Image Edited by Host to Remove Serial Number>

  • HT201317 i have enabled photostream on my imac but only a small selection of old photos from my iphone have streamed through.  How do i get all the existing photos from both my iphone and ipad onto my iMac?

    I have enabled photostream on my imac but only a small selection of old photos from my iphone have streamed through.  How do i get all the existing photos from both my iphone and ipad onto my iMac?

    This usually happens because iCloud only keeps photo stream photos for 30 days (even though your last 1000 photos will remain on your phone until deleted).  When you enabled photo stream on your Mac you only received photo stream photos from the last 30 days.
    To get older photos to your Mac, create a shared photo stream containing them and invite yourself as a subscriber (see http://help.apple.com/icloud/#mmc0cd7e99).  The be sure you check Shared Photo Streams in iPhoto>Preferences>Photo Stream.  You can then import them to your iPhoto library by opening the shared photo stream album in iPhoto, then going to Edit>Select All, Control-clicking on any of the selected photos and selecting Import.

  • How can I delete useless memory on both my iPhone and my Macbook Pro?

    How can I delete useless memory on both my iPhone and my Macbook Pro?

    I don't know much about iPhones but when you write "memory" do you mean the data on your hard drive on your MacBook Pro? If so, simply drag the items you deem as useless into the Trash and empty the Trash. DON'T fool around with any of the system items, just your own documents that you feel that you no longer need.
    You can get an answer on freeing up space on your iPhone in the iPhone forum.
    Clinton

  • Should I get a 2.0 or 3.0 USB external hard drive for my 2011 Macbook Pro? I need it to be compatible with the USB ports of both a PC and a Mac.

    Should I get a 2.0 or 3.0 USB external hard drive for my 2011 Macbook Pro? I need it to be compatible with the USB ports of both a PC and a Mac. I was thinking of getting a Seagate becuase apparently it is compatible with both systems, but I want to know which would be a better investment.

    Using USB 3 devices on Mac computers FAQ

  • How to know if my iphone 4s is open line and can use it anywhere or in any country?,

    how to know if my iphone 4s is open line and can use it anywhere or in any country?,like i bougth it in united arab emirates and if im in philippines i can still use it there?.

    If you did not purchase it from an authorized distributor, then there is no way to tell short of trying a different SIM. Even then, it may have been hacked to unlock it.
    That's a risk you take when you buy from the gray market.

  • IPAD3/IPAD2 :PDF files/ attachments  sent in an email  displayed inline ( embedded within the main email) in the message text on both my Ipad2 and Ipad three, however the same email displayed the PDF File icons/ attachment on both my Iphone and a friend's

    IPAD3/IPAD2 :PDF files/ attachments  sent in an email  displayed inline ( embedded within the main email) in the message text on both my Ipad2 and Ipad three, however the same email displayed the PDF File icons/ attachment on both my Iphone and a friend’s PC. How do i get both my IPAD devices to display the PDF icons/attachments? Bearing in mind if i open the same email over the internet the PDF Icons/attachments display OK!
    Has anyone come across this? Your advice/help would be most appreciated

    This happens to me all the time.
    If is a one page PDF it seems as though it comes over already open and inline in the body of the email. Multiple page PDF files show as the PDF icon.
    I can't find any official documentation of this - other than based on my own experience with PDF attachments in my various email accounts.
    Message was edited by: Demo

  • The "join" button on both my iPad and iPhone is grayed out. Network can be seen but not joined

    The "join" button on both my iPad and iPhone is grayed out. Network can be seen but not joined

    I've reset the password a few times and know I am using the correct one. I get the same error on both my iPad and iPhone. Both see the network but maybe there is a problem with the router. I've also reset that a few times with no luck. Thank you.

  • Continual problem with the Adjustment brush in both Lightroom 3 and Lightroom 4

    The Adjustment brush in both Lightroom 3 and Lightroom 4 continually stops functioning correctly - that is any adjustment made using the sliders in the Adjustment Brush panel does not make an adjustment on the image.      Normally I would go to Library / Preferences [on my iMac OSX 10.6.8], remove the com.adobe.Lightroom3.plist file and restart Lightroom.     However I have gone to Library/Preferences and there is no listing of any Lightroom 3 plist files, nor for that matter any adobe Photoshop CS5 plist files or any adobe Lightroom 4 plist files.      I have tried restarting the iMac but to no avail - no help at all!      I have no idea how to remedy the situation as I have no idea where the plist files have gone!!!
    Incidentally I have a new iMac 27" OSX 10.8 - same problem with the Adjustment Brush there, but so far the plist files haven't disappeared into the ether somewhere!
    Help would be appreciated  ...
    Many thanks

    Hi Jussi
    I tried changing to the B brush set, and the Adjustment Brush worked OK in there for a while - but now I have the same problem with the B brush set too.     It appears to happen instantly - one minute they're working, the next minute they're not!!         For example, I was adjusting Brightening using the Adjustment Brush and I literally made an adjustment on one image, then went back into the same image seconds later to make a further Brightening adjustment and the brush wasn't working - well, that is, not unless I pushed the slider to something like 160 and then I got minimal adjustment!!!       I am becoming increasingly frustrated  ..   I have literally worked for months with no problems, now it's almost every day!!

  • I want to change the email address for both the app store

    I want to change the email address of both the app store & iTunes I created an iTunes account then bought a family pack @me.com so everything is not straight forward I have a gmail log in for both iTunes & the AppStore & then more than one Apple ID I have just increased my cloud storage but I am tired of having to use a gmail address for the App Store & iTunes especially since gmail would appear to be less secure that @icloud.com so how do I change this ?

    Not a good idea. Apple content is forever associated with the Apple ID that bought it. Apple does not transfer content from one Apple ID to another Apple ID. Apple does not merge Apple IDs. The only Apple ID that can (re)download, update and authorize content for use on Macs, PCs and iOS devices is the Apple ID that bought it.
    You can however change the email address associated with an Apple ID;
    http://support.apple.com/kb/HT5621

  • I have purchased the VGA Connectors for both a iMac and Macbook Pro so that i can connect my promethean board projector to the computer and I can not get the image on the screen.  Does anyone have any suggestions?

    I have purchased the VGA Connectors for both a iMac and Macbook Pro so that i can connect my promethean board projector to the computer and I can not get the image on the screen.  Does anyone have any suggestions?

    Irelandbound wrote:
    thank you, I have the adaptors so glad that would work.  I just heard adaptors burn out often.  So Just thought for my main iMac computer, a plug would be best.  I will get one once I move.
    Any other suggestions or things I should know about apple products in Ireland.  I know there are no Apple stores there.
    An adaptor doesn't burn out. It merely serves as a means to connect the power prongs on your device to the power supply.
    I believe you are thinking of a transformer, which you do not need. A transformer converts one voltage to another.
    You don't need to do that as the power supply of modern electronics can take almost any worldwide voltage.
    Look at the label on the device. It should indicate the input power acceptable of 100-240 VAC, 50-60 Hz.
    Additionally, I found the adapters cheaper in the UK than I found them in the US. They were available in most supermarket chains. I wasn't in Ireland, so I can't say one way or the other.
    If you have something that doesn't have that input power spec, it would require a transformer.
    On other items like electric clocks or things with motors, you can connect them up to a transformer and the voltage will be correct, but the frequency may not. For clocks, that will cause them to not keep time well. For motors, they will burn out.

  • Need to calculate the monthly amount based to the annaul salary

    Hi Expert,
    I need to calculate the monthly amount based to the annual salary.
    Some countries use a multiplier more than 12 to calculate the annual salary (e.g : 13,14 ...).
    My problem is to calculate the monthly increase.
    The increase amount is on the annual salary but for the monthly increase, normally, the system divides by the mutliplier.
    But some countries would like calculate these amount on 12 and not the real multiplier.
    So, could you please tell me there are user-exits or other to make this ???
    Thanks in advance,
    Virginie

    Hi Virginie,
    Check both feature PFREQ (Edit with transaction PE03) and user-exit corresponding to enhancement PARA0001.
    rgds,
    Carlos.

Maybe you are looking for

  • After I Update to IOS 7.1 I can't open the excel file attached in  my email

    After I updated my Iphone 5s from IOS7.0.6 to IOS7.1 when i check my email i can't open excel file attached in my email i check with my frineds phone thy have same issoue

  • IPhone 3g non stop rebooting itself. Please help!

    Hi, I have a iPhone 3g, and last night i replace the batter on it. After 12 hrs later the phone is non stop rebooting itself. Please help!

  • Motion guide for a mask?

    Am I missing something obvious or is it not possible to apply a motion guide layer (with a path) to a mask (mc or graphic instance) or masked object? Any suggestions are greatly appreciated. Of course the ideal way around this would be to move the ma

  • Portal on WAS 640 JAVA cluster

    Can anyone help me with the install sequesnce for this scenario. I have 2 physical hosts I want to run a java CI on one and a java DI on the other I also want the portal to be installed as an application I would like to patch the JAVA WAS to SP13 I w

  • -bash: /usr/bin/grep: Bad executable (or shared library)

    I am receiving these error messages when I attempt to use grep, egrep, or fgrep from the terminal: -bash: /usr/bin/grep: Bad executable (or shared library) -bash: /usr/bin/egrep: Bad executable (or shared library) -bash: /usr/bin/fgrep: Bad executabl