How to know used space(size) of database or user?

Hi
can anyone let me know how to caluculate the used space(size) of the database ans user(schema).
Thanks in advance.

Hello,
For the used space of the database you may use the following query:
select sum(bytes)/(1024*1024) "Mo" from dba_segments;For the used space of the Schemas you may use the query below:
select owner, sum(bytes)/(1024*1024) "Mo"
from dba_segments
group by owner;Hope this help.
Best regards,
Jean-Valentin

Similar Messages

How can free + used space tbs size, can someone explain

Hi Gurus
Can someone explain this, How can free + used space in a tablespace can be greater than size of a tablespace. What am I missing here . Thanks a lot .
I am on 10.2.0.1, HP-UX
14:38:52 SQL> select owner,sum(bytes), sum(BYTES) /1024/1024 "MB" from dba_segments where tablespace
name='USERDB1ADATA' group by owner;
OWNER SUM(BYTES) MB
USERDB1A 839680000 800.78125
1 row selected.
14:40:42 SQL> select bytes, BYTES /1024/1024 "MB" from dba_data_files where tablespace_name='USERDB1
A_DATA';
BYTES MB
3758096384 3584
1 row selected.
14:40:42 SQL> select sum(bytes) , sum(BYTES) /1024/1024 "MB"from dba_free_space where tablespace_nam
e='USERDB1A_DATA';
SUM(BYTES) MB
3067412480 2925.3125
1 row selected.
14:40:43 SQL> select 839680000 + 3067412480 "used + free space" from dual;
used + free space
3907092480
1 row selected.
New DBA

Good point, Howard, about the recycle bin. So I cleaned up, recreated the table, filled it, dropped it but did not purge it, and ...
SQL> create table test.x tablespace test as select * from dba_objects where 1=2;
Table created.
SQL> insert into test.x select * from dba_objects;
12617 rows created.
SQL> commit;
Commit complete.
SQL> drop table test.x;
Table dropped.
SQL> with
2 dbf_size as (select sum(bytes) size_
3                 from dba_data_files where tablespace_name='TEST'),
4 dbf_free as (select sum(bytes) free_
5                 from dba_free_space where tablespace_name='TEST'),
6 dbf_used as (select sum(bytes) used_
7                 from dba_segments where tablespace_name='TEST')
8 select size_, free_, used_, (size_ - free_ - used_) left_
9         from dbf_size, dbf_free, dbf_used
10 /
     SIZE_      FREE_      USED_      LEFT_
   5242880    5177344    2162688   -2097152
SQL>and then I played around with my SQL and came up with
WITH
dbf_size AS (SELECT SUM(bytes) size_
               FROM dba_data_files
              WHERE tablespace_name='TEST'),
dbf_free AS (SELECT SUM(bytes) free_
               FROM dba_free_space
              WHERE tablespace_name='TEST'),
dbf_used AS (SELECT SUM(bytes) used_
               FROM dba_segments
              WHERE tablespace_name='TEST'),
dbf_fbin AS (SELECT SUM(bytes) fbin_
               FROM dba_segments
              INNER JOIN
                    dba_recyclebin
                 ON (tablespace_name=ts_name
                     AND segment_name=object_name)
              WHERE tablespace_name='TEST')
SELECT      size_, -- tablespace size
     free_, -- free space reported
     used_, -- segment space used
     fbin_, -- segment space in recycle bin
     (size_ - free_ - used_ + fbin_) left_ -- 64K overhead per data file
FROM      dbf_size, dbf_free, dbf_used, dbf_fbin
/which does
SQL> WITH
2 dbf_size AS (SELECT SUM(bytes) size_
3                 FROM dba_data_files
4                WHERE tablespace_name='TEST'),
5 dbf_free AS (SELECT SUM(bytes) free_
6                 FROM dba_free_space
7                WHERE tablespace_name='TEST'),
8 dbf_used AS (SELECT SUM(bytes) used_
9                 FROM dba_segments
10                WHERE tablespace_name='TEST'),
11 dbf_fbin AS (SELECT SUM(bytes) fbin_
12                 FROM dba_segments
13                INNER JOIN
14                      dba_recyclebin
15                   ON (tablespace_name=ts_name
16                       AND segment_name=object_name)
17                WHERE tablespace_name='TEST')
18 SELECT     size_,
19     free_,
20     used_,
21     fbin_,
22     (size_ - free_ - used_ + fbin_) left_
23    FROM     dbf_size, dbf_free, dbf_used, dbf_fbin
24 /
     SIZE_      FREE_      USED_      FBIN_      LEFT_
   5242880    5177344    2162688    2162688      65536
SQL> alter tablespace test add datafile 'C:\ORACLE\ORADATA\XE\TEST2.DBF' size 5m;
Tablespace altered.
SQL> WITH
2 dbf_size AS (SELECT SUM(bytes) size_
3                 FROM dba_data_files
4                WHERE tablespace_name='TEST'),
5 dbf_free AS (SELECT SUM(bytes) free_
6                 FROM dba_free_space
7                WHERE tablespace_name='TEST'),
8 dbf_used AS (SELECT SUM(bytes) used_
9                 FROM dba_segments
10                WHERE tablespace_name='TEST'),
11 dbf_fbin AS (SELECT SUM(bytes) fbin_
12                 FROM dba_segments
13                INNER JOIN
14                      dba_recyclebin
15                   ON (tablespace_name=ts_name
16                       AND segment_name=object_name)
17                WHERE tablespace_name='TEST')
18 SELECT     size_, -- tablespace size
19     free_, -- free space reported
20     used_, -- segment space used
21     fbin_, -- segment space used in recycle bin
22     (size_ - free_ - used_ + fbin_) left_
23    FROM     dbf_size, dbf_free, dbf_used, dbf_fbin
24 /
     SIZE_      FREE_      USED_      FBIN_      LEFT_
10485760   10354688    2162688    2162688     131072Message was edited by:
Hans Forbrich
Cleaned up the script and tested with second data file added to verify LMT overhead.

How to know the payload size of message

hi can anybody tell me how to know the payload size of message?
Message was edited by:
vvr murty

Hi,
To know the size of the input message , i hope we have one option , after copying the test payload from the SXMB_MONI into Message mapping test -- click on test
after come back to design tab in message mappign
click on left side root node and Press CTRL+SHIFT + mouse right click and click on trace -- you can see the size of the message payload.
In SXMB_MONI..
see the payload messges
also see the below link
/people/michal.krawczyk2/blog/2005/09/16/xi-how-to-test-your-mapping-in-real-life-scenarios
Regards
Chilla

How to know which table in the database a form is accessing

Actually Im new to oracle applications,
Im getting an error when i open a form from system administrator responsibility saying that table doesnot exist.
My basic doubt is, how to know which table in the database a form is accessing.
Any response is higly appreciated.
Thanks,
Praveen
Edited by: user10239520 on Sep 10, 2008 7:07 AM

Take a look at the following thread:
Is there a query log in EBS?
Re: Is there a query log in EBS?

HT1660 how can I use one single library for all users on the same laptop?

how can I use one single library for all users on the same laptop?

You are most of the way there. Each user having access to hard drive is the key. If users are limited in file privileges this is harder.
Any files you add to your library and any files she adds to her library are available to the other. Just not automatically. Each user must add the files to their own library using the add file or add folder option from menu bar.
What I have done is set library location to a location outside of My Documents\My Music. On my network storage I have a folder names s:\itunes. Both accounts iTunes are set to use this location for the library.

How to know the specific size of a field in oracle table

Hello,
oracle 11.2.0.3 on redhat
i have three tables with same structure, table0, table50, table100:
create table table0 (id number, shipment RAW(2000), options RAW(2000));
i inserted 10000 rows in each but with some differences:
table0 has 10000 id, but shipment and options has null values
table50 has 10000 id, but shipment and options has only 5000 rows, the other 5000 are null values
table100 has 10000 rows of id, shipment and options. No null values.
I want to know the specific size of each column, also the size of each row, to know the exactly size of the field.
for example:
row 1, column options of table100 has "asdfasdfagasdgasbabsdgoasdpgiahnwe1129u412094u12"
row 2, column options of table100 has "a".
both are raw datatype, but i think its space will has different size (bytes), how to know it? any query?
I found this query:
select owner,tablespace_name,segment_name,sum((bytes/1024/1024)) Bytes
from sys.dba_extents
where owner in 'MAA' and segment_type='TABLE' and segment_name ='TABLE00'
group by tablespace_name,owner,segment_name
order by owner,tablespace_name,segment_name, bytes; but i think it isn't my solution.

thx mr. sb92075
i tried with vsize too but same result:
with table50
SELECT VSIZE(OPTIONS) FROM TABLE00;
VSIZE(OPTIONS)
             1000
             1000
             1000
             1000
               *with table100
SELECT VSIZE(OPTIONS) FROM TABLE100;
VSIZE(C_ELECCION)
             2000
             2000
             2000
             2000
                  *it's the same size for 'a' like 'abcasdfjañldngaosnbaposnbpaosuqroiwejrklasndiaoshbaposdjgajs'?? It's hard for me to believe.
data is saved in blocks, a extents is a contiguos number of blocks and a group of extensions are segments. If you insert some text in a table field, Oracle create a extension and insert there the data but depend the bytes you insert Oracle will create one or more extents. How to know this specific space in that field?

[Forum FAQ] How do i use xml stored in database as dataset in SQL Server Reporting Services?

Introduction
There is a scenario that users want to create SSRS report, the xml used to retrieve data for the report is stored in table of database. Since the data source is not of XML type, when we create data source for the report, we could not select XML as Data Source
type. Is there a way that we can create a dataset that is based on data of XML type, and retrieve report data from the dataset?
Solution
In this article, I will demonstrate how to use xml stored in database as dataset in SSRS reports.
Supposing the original xml stored in database is like below:
<Customers>
<Customer ID="11">
<FirstName>Bobby</FirstName>
<LastName>Moore</LastName>
</Customer>
<Customer ID="20">
<FirstName>Crystal</FirstName>
<LastName>Hu</LastName>
</Customer>
</Customers>
Now we can create an SSRS report and use the data of xml type as dataset by following steps:
In database, create a stored procedure to retrieve the data for the report in SQL Server Management Studio (SSMS) with the following query:
CREATE PROCEDURE xml_report
AS
DECLARE @xmlDoc XML;
SELECT @xmlDoc = xmlVal FROM xmlTbl WHERE id=1;
SELECT T.c.value('(@ID)','int') AS ID,
T.c.value('(FirstName[1])','varchar(99)') AS firstName,
T.c.value('(LastName[1])','varchar(99)') AS lastName
FROM
@xmlDoc.nodes('/Customers/Customer') T(c)
GO
P.S. This is an example for a given structured XML, to retrieve node values from different structured XMLs, you can reference here.
Click Start, point to All Programs, point to Microsoft SQL Server, and then click Business Intelligence Development Studio (BIDS) OR SQL Server Data Tools (SSDT). If this is the first time we have opened SQL Server Data Tools, click Business Intelligence
Settings for the default environment settings.
On the File menu, point to New, and then click Project.
In the Project Types list, click Business Intelligence Projects.
In the Templates list, click Report Server Project.
In Name, type project name.
Click OK to create the project.
In Solution Explorer, right-click Reports, point to Add, and click New Item.
In the Add New Item dialog box, under Templates, click Report.
In Name, type report name and then click Add.
In the Report Data pane, right-click Data Sources and click Add Data Source.
For an embedded data source, verify that Embedded connection is selected. From the Type drop-down list, select a data source type; for example, Microsoft SQL Server or OLE DB. Type the connection string directly or click Edit to open the Connection Properties
dialog box and select Server name and database name from the drop down list.
For a shared data source, verify that Use shared data source reference is selected, then select a data source from the drop down list.
Right-click DataSets and click Add Dataset, type a name for the dataset or accept the default name, then check Use a dataset embedded in my report. Select the name of an existing Data source from drop down list. Set Query type to StoredProcedure, then select
xml_report from drop down list.
In the Toolbox, click Table, and then click on the design surface.
In the Report Data pane, expand the dataset we created above to display the fields.
Drag the fields from the dataset to the cells of the table.
Applies to
Reporting Services 2008
Reporting Services 2008 R2
Reporting Services 2012
Reporting Services 2014
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

I have near about 30 matrics. so I need a paging. I did every thing as per this post and it really works for me.
I have total four columns. On one page it should show three and the remaining one will be moved to next page.
Problem occurs when in my first row i have 3 columns and in next page if I have one columns then it show proper on first page but on second page also it gives me three columns insted of one. the first column data is exactly what I have but in remaining two
columns it shows some garbage data.
I have data like below.
Metric ColumnNo RowNo
1 1
1
2 2
1
3 3
1
4 1
2
so while grouping i have a row parent group on RowNo and Column group on ColumnNo.
can anyone please advice on this.

How to know the image size and coding of our j2me project

Hi,
I have developed a game and i did the obfuscation. My jar size is now 170KB. How can differentiate the coding size and the image size from the total jar size.
If i asked any thing wrongly, please forgive me and clarify my doubt.
I am looking forward to meet ur queries if any.
Thanks and Regards,
Hithayath.

<?xml version="1.0" encoding="UTF-8"?>

<project xmlns:projdeps2="http://www.netbeans.org/ns/ant-project-references/2" basedir=".." default="jar" name="-impl">
<target name="pre-init"/>
<target depends="pre-init" name="pre-load-properties">
<property file="nbproject/private/private.properties"/>
<property value="0.0.1" name="deployment.number"/>
<property value="000002" name="deployment.counter"/>
<property location="${netbeans.user}/build.properties" name="user.properties.file"/>
<available file="${user.properties.file}" property="user.properties.file.exists"/>
</target>
<target unless="config.active" depends="pre-load-properties" name="exists.config.active">
<echo message="Active configuration (config.active property) is not set - using default." level="warning"/>
<property name="config.active" value=""/>
</target>
<target unless="netbeans.user" depends="pre-load-properties" name="exists.netbeans.user">
<echo message="NetBeans IDE user directory (netbeans.user property) is not set. By specifying this property many properties required by the project will be automatically evaluated (e.g.: ant-ext library home, ...). You could also open this project in the NetBeans IDE - in this case this property would be set automatically." level="warning"/>
</target>
<target unless="user.properties.file.exists" depends="pre-load-properties" name="exists.user.properties.file">
<echo message="User properties file (user.properties.file) property is not set. By specifying this property many properties required by the project will be automatically evaluated (e.g.: libraries, platforms, ...)." level="warning"/>
</target>
<target depends="pre-load-properties,exists.config.active,exists.netbeans.user,exists.user.properties.file" name="load-properties">
<loadproperties srcfile="nbproject/project.properties">
<filterchain>
<containsregex replace="\1" pattern="^configs\.${config.active}\.(.*)"/>
<concatfilter prepend="nbproject/project.properties"/>
<containsregex pattern="^platform.active=|^deployment.method="/>
</filterchain>
</loadproperties>
<loadproperties srcfile="${user.properties.file}">
<filterchain>
<replaceregex replace="platform." pattern="^platforms\.${platform.active}\."/>
<replaceregex replace="deployment.scriptfile=" pattern="^deployment\.${deployment.method}\.scriptfile="/>
</filterchain>
</loadproperties>
<loadproperties srcfile="nbproject/project.properties">
<filterchain>
<containsregex replace="\1" pattern="^configs\.${config.active}\.(.*)"/>
<concatfilter prepend="nbproject/project.properties"/>
</filterchain>
</loadproperties>
</target>
<target unless="platform.active" depends="load-properties" name="exists.platform.active">
<echo message="Active platform (platform.active property) in not set. If you set this and user.properties.file property, many properties required by the project will be automatically evaluated (e.g.: platform home, platform classpath, ...)." level="warning"/>
</target>
<target depends="load-properties" unless="platform.configuration" name="exists.platform.configuration">
<echo message="Platform configuration (platform.configuration) is not set. Using default (CLDC-1.0) configuration." level="warning"/>
<property value="CLDC-1.0" name="platform.configuration"/>
</target>
<target depends="load-properties" unless="platform.profile" name="exists.platform.profile">
<echo message="Platform profile (platform.profile) is not set. Using default (MIDP-1.0) profile." level="warning"/>
<property value="MIDP-1.0" name="platform.profile"/>
</target>
<target depends="pre-init,load-properties,exists.platform.active,exists.platform.configuration,exists.platform.profile" name="init">
<fail unless="libs.j2me_ant_ext.classpath">Classpath to J2ME Ant extension library (libs.j2me_ant_ext.classpath property) is not set. For example: location of mobility/modules/org-netbeans-modules-kjava-antext.jar file in the IDE installation directory.</fail>
<fail unless="platform.home">Platform home (platform.home property) is not set. Value of this property should be ${platform.active.description} emulator home directory location.</fail>
<fail unless="platform.bootclasspath">Platform boot classpath (platform.bootclasspath property) is not set. Value of this property should be ${platform.active.description} emulator boot classpath containing all J2ME classes provided by emulator.</fail>
<fail unless="src.dir">Must set src.dir</fail>
<fail unless="build.dir">Must set build.dir</fail>
<fail unless="build.classes.dir">Must set build.classes.dir</fail>
<fail unless="preprocessed.dir">Must set preprocessed.dir</fail>
<fail unless="preverify.classes.dir">Must set preverify.classes.dir</fail>
<fail unless="obfuscated.classes.dir">Must set obfuscated.classes.dir</fail>
<fail unless="dist.dir">Must set dist.dir</fail>
<fail unless="dist.jar">Must set dist.jar</fail>
<fail unless="dist.jad">Must set dist.jad</fail>
<fail unless="obfuscator.srcjar">Must set obfuscator.srcjar</fail>
<fail unless="obfuscator.destjar">Must set obfuscator.destjar</fail>
<fail unless="dist.javadoc.dir">Must set dist.javadoc.dir</fail>
<property value="" name="abilities"/>
<property value="" name="obfuscator.classpath"/>
<property value="" name="kjava.configuration"/>
<property value="UEI-1.0" name="platform.type"/>
<property value="" name="platform.device"/>
<property value="0" name="obfuscation.level"/>
<property value="false" name="sign.enabled"/>
<property value="file://" name="dist.jad.url"/>
<property value="1.3" name="javac.source"/>
<property value="1.1" name="javac.target"/>
<property value="${file.encoding}" name="javac.encoding"/>
<condition property="no.deps">
<istrue value="${no.dependencies}"/>
</condition>
<condition property="no.javadoc.preview">
<isfalse value="${javadoc.preview}"/>
</condition>
<condition value="${filter.excludes},**/*Test.java,**/test,**/test/**" property="filter.excludes.evaluated">
<istrue value="${filter.exclude.tests}"/>
</condition>
<property value="${filter.excludes}" name="filter.excludes.evaluated"/>
<condition value="" property="evaluated.run.security.domain">
<isfalse value="${run.use.security.domain}"/>
</condition>
<condition value="" property="deployment.do.override.jarurl">
<istrue value="${deployment.override.jarurl}"/>
</condition>
<property value="${run.security.domain}" name="evaluated.run.security.domain"/>
<taskdef resource="org/netbeans/modules/kjava/antext/defs.properties">
<classpath>
<pathelement path="${libs.j2me_ant_ext.classpath}"/>
</classpath>
</taskdef>
<uptodate targetfile="${preprocessed.dir}/.timestamp" property="no.clean.before.build">
<srcfiles dir="nbproject">
<include name="project.properties"/>
<include name="build-impl.xml"/>
</srcfiles>
</uptodate>
<condition property="skip.deployment">
<equals trim="true" casesensitive="false" arg2="NONE" arg1="${deployment.method}"/>
</condition>
<condition property="skip-sign-keystore-password-input">
<or>
<isfalse value="${sign.enabled}"/>
<and>
<isset property="sign.keystore"/>
<isset property="sign.keystore.password"/>
<not>
<equals trim="true" arg2="" arg1="${sign.keystore}"/>
</not>
<not>
<equals trim="true" arg2="" arg1="${sign.keystore.password}"/>
</not>
</and>
</or>
</condition>
<condition property="skip-sign-alias-password-input">
<or>
<isfalse value="${sign.enabled}"/>
<and>
<isset property="sign.keystore"/>
<isset property="sign.alias"/>
<isset property="sign.alias.password"/>
<not>
<equals trim="true" arg2="" arg1="${sign.keystore}"/>
</not>
<not>
<equals trim="true" arg2="" arg1="${sign.alias}"/>
</not>
<not>
<equals trim="true" arg2="" arg1="${sign.alias.password}"/>
</not>
</and>
</or>
</condition>
<antcall inheritrefs="true" inheritall="true" target="post-init"/>
</target>
<target name="post-init"/>
<target name="deps-jar" depends="init" unless="no.deps"/>
<target description="Clean project in case its meta information has changed." unless="no.clean.before.build" depends="init" name="conditional-clean">
<antcall target="do-clean" inheritall="true" inheritrefs="true"/>
</target>
<target name="pre-preprocess"/>
<target description="Preprocess project sources." depends="init,pre-preprocess,deps-jar,conditional-clean" name="preprocess">
<mkdir dir="${preprocessed.dir}"/>
<echo file="${preprocessed.dir}/.timestamp" message="ignore me"/>
<nb-prep encoding="${javac.encoding}" preprocessfor="${config.active},${abilities}" destdir="${preprocessed.dir}">
<fileset excludes="${filter.excludes.evaluated}" defaultexcludes="${filter.use.standard}" dir="${src.dir}"/>
</nb-prep>
<antcall inheritrefs="true" inheritall="true" target="post-preprocess"/>
</target>
<target name="post-preprocess"/>
<target description="Extracts all bundled libraries." depends="init,deps-jar,conditional-clean" name="extract-libs">
<mkdir dir="${build.classes.dir}"/>
<nb-extract excludeManifest="true" dir="${build.classes.dir}">
<classpath>
<path path="${libs.classpath}"/>
</classpath>
</nb-extract>
</target>
<target name="pre-compile"/>
<target description="Compile project classes." depends="init,preprocess,extract-libs,pre-compile" name="compile">
<mkdir dir="${build.classes.dir}"/>
<javac encoding="${javac.encoding}" bootclasspath="${platform.bootclasspath}" srcdir="${preprocessed.dir}" destdir="${build.classes.dir}" debug="${javac.debug}" optimize="${javac.optimize}" deprecation="${javac.deprecation}" target="${javac.target}" source="${javac.source}" includeantruntime="false">
<classpath>
<path path="${libs.classpath}"/>
</classpath>
</javac>
<copy todir="${build.classes.dir}">
<fileset excludes="${filter.excludes.evaluated},${build.classes.excludes}" defaultexcludes="${filter.use.standard}" dir="${src.dir}"/>
</copy>
<antcall inheritrefs="true" inheritall="true" target="post-compile"/>
</target>
<target name="post-compile"/>
<target name="pre-compile-single"/>
<target description="Compile selected project classes." depends="init,preprocess,extract-libs,pre-compile-single" name="compile-single">
<fail unless="javac.includes">Must select some files in the IDE or set javac.includes</fail>
<mkdir dir="${build.classes.dir}"/>
<javac encoding="${javac.encoding}" includes="${javac.includes}" bootclasspath="${platform.bootclasspath}" destdir="${build.classes.dir}" srcdir="${preprocessed.dir}" debug="${javac.debug}" optimize="${javac.optimize}" deprecation="${javac.deprecation}" target="${javac.target}" source="${javac.source}" includeantruntime="false">
<classpath>
<path path="${libs.classpath}"/>
</classpath>
</javac>
<antcall inheritrefs="true" inheritall="true" target="post-compile-single"/>
</target>
<target name="post-compile-single"/>
<target depends="init" name="create-jad">
<mkdir dir="${build.dir}"/>
<dirname property="dist.jad.dir" file="${dist.dir}/${dist.jad}"/>
<mkdir dir="${dist.jad.dir}"/>
<condition value="${manifest.apipermissions}" property="evaluated.manifest.apipermissions">
<not>
<equals arg2="MIDP-1.0" arg1="${platform.profile}"/>
</not>
</condition>
<condition value="${manifest.pushregistry}" property="evaluated.manifest.pushregistry">
<not>
<equals arg2="MIDP-1.0" arg1="${platform.profile}"/>
</not>
</condition>
<condition property="contains.manifest.configuration">
<contains string="${manifest.others}" substring="MicroEdition-Configuration: "/>
</condition>
<condition property="contains.manifest.profile">
<contains string="${manifest.others}" substring="MicroEdition-Profile: "/>
</condition>
<property name="evaluated.manifest.apipermissions" value=""/>
<property name="evaluated.manifest.pushregistry" value=""/>
<property value="" name="manifest.jad"/>
<property value="" name="manifest.manifest"/>
<echo file="${dist.dir}/${dist.jad}">${manifest.midlets}${evaluated.manifest.apipermissions}${evaluated.manifest.pushregistry}${manifest.others}${manifest.jad}</echo>
<echo file="${build.dir}/manifest.mf">${manifest.midlets}${evaluated.manifest.apipermissions}${evaluated.manifest.pushregistry}${manifest.others}${manifest.manifest}</echo>
<antcall inheritrefs="true" inheritall="true" target="add-configuration"/>
<antcall inheritrefs="true" inheritall="true" target="add-profile"/>
</target>
<target unless="contains.manifest.configuration" name="add-configuration">
<echo append="true" file="${dist.dir}/${dist.jad}">MicroEdition-Configuration: ${platform.configuration}
</echo>
<echo append="true" file="${build.dir}/manifest.mf">MicroEdition-Configuration: ${platform.configuration}
</echo>
</target>
<target unless="contains.manifest.profile" name="add-profile">
<echo append="true" file="${dist.dir}/${dist.jad}">MicroEdition-Profile: ${platform.profile}
</echo>
<echo append="true" file="${build.dir}/manifest.mf">MicroEdition-Profile: ${platform.profile}
</echo>
</target>
<target name="pre-obfuscate"/>
<target description="Up-to-date check before obfuscation." depends="init,compile" name="obfuscate-check">
<uptodate targetfile="${obfuscator.destjar}" property="no.obfusc">
<srcfiles dir="${build.classes.dir}"/>
</uptodate>
</target>
<target unless="no.obfusc" description="Obfuscate project classes." depends="init,compile,obfuscate-check,pre-obfuscate" name="obfuscate">
<dirname property="obfuscator.srcjar.dir" file="${obfuscator.srcjar}"/>
<dirname property="obfuscator.destjar.dir" file="${obfuscator.destjar}"/>
<mkdir dir="${obfuscator.srcjar.dir}"/>
<mkdir dir="${obfuscator.destjar.dir}"/>
<jar basedir="${build.classes.dir}" jarfile="${obfuscator.srcjar}"/>
<property value="" name="obfuscation.custom"/>
<nb-obfuscate extraScript="${obfuscation.custom}" obfuscationLevel="${obfuscation.level}" classpath="${platform.bootclasspath}" obfuscatorclasspath="${obfuscator.classpath}" destjar="${obfuscator.destjar}" srcjar="${obfuscator.srcjar}"/>
<mkdir dir="${obfuscated.classes.dir}"/>
<unjar dest="${obfuscated.classes.dir}" src="${obfuscator.destjar}"/>
<antcall inheritrefs="true" inheritall="true" target="post-obfuscate"/>
</target>
<target name="post-obfuscate"/>
<target name="pre-preverify"/>
<target description="Preverify project classes." depends="init,compile,obfuscate,pre-preverify" name="preverify">
<mkdir dir="${preverify.classes.dir}"/>
<nb-preverify commandline="${platform.preverifycommandline}" platformtype="${platform.type}" platformhome="${platform.home}" configuration="${platform.configuration}" classpath="${platform.bootclasspath}" destdir="${preverify.classes.dir}" srcdir="${obfuscated.classes.dir}"/>
<antcall inheritrefs="true" inheritall="true" target="post-preverify"/>
</target>
<target name="post-preverify"/>
<target unless="skip-sign-keystore-password-input" if="netbeans.home" depends="init" name="set-keystore-password">
<nb-enter-password passwordproperty="sign.keystore.password" keystore="${sign.keystore}"/>
</target>
<target unless="skip-sign-alias-password-input" if="netbeans.home" depends="init" name="set-alias-password">
<nb-enter-password passwordproperty="sign.alias.password" keyalias="${sign.alias}" keystore="${sign.keystore}"/>
</target>
<target name="pre-jar"/>
<target description="Build jar and application descriptor." depends="init,preverify,create-jad,set-keystore-password,set-alias-password,pre-jar" name="jar">
<dirname property="dist.jar.dir" file="${dist.dir}/${dist.jar}"/>
<mkdir dir="${dist.jar.dir}"/>
<jar manifest="${build.dir}/manifest.mf" jarfile="${dist.dir}/${dist.jar}" compress="${jar.compress}">
<fileset dir="${preverify.classes.dir}"/>
<fileset dir="${obfuscated.classes.dir}">
<exclude name="**/*.class"/>
</fileset>
</jar>
<nb-jad aliaspassword="${sign.alias.password}" alias="${sign.alias}" keystorepassword="${sign.keystore.password}" keystore="${sign.keystore}" sign="${sign.enabled}" url="${dist.jar}" jarfile="${dist.dir}/${dist.jar}" jadfile="${dist.dir}/${dist.jad}"/>
<antcall inheritrefs="true" inheritall="true" target="post-jar"/>
</target>
<target name="post-jar"/>
<target description="Rebuild the application." depends="init,clean,jar" name="rebuild"/>
<target description="Run MIDlet suite." depends="init,jar" name="run">
<nb-run commandline="${platform.runcommandline}" securitydomain="${evaluated.run.security.domain}" execmethod="${run.method}" platformtype="${platform.type}" platformhome="${platform.home}" device="${platform.device}" jadurl="${dist.jad.url}" jadfile="${dist.dir}/${dist.jad}"/>
</target>
<target description="Quick Run already built MIDlet suite." depends="init" name="run-no-build">
<nb-run commandline="${platform.runcommandline}" securitydomain="${evaluated.run.security.domain}" execmethod="${run.method}" platformtype="${platform.type}" platformhome="${platform.home}" device="${platform.device}" jadurl="${dist.jad.url}" jadfile="${dist.dir}/${dist.jad}"/>
</target>
<target depends="init,clean,jar" description="Debug project." name="debug">
<delete file="${preprocessed.dir}/.timestamp"/>
<parallel>
<nb-run commandline="${platform.debugcommandline}" securitydomain="${evaluated.run.security.domain}" execmethod="${run.method}" jadfile="${dist.dir}/${dist.jad}" device="${platform.device}" platformhome="${platform.home}" platformtype="${platform.type}" debuggeraddressproperty="jpda.port" debugserver="true" debugsuspend="true" debug="true"/>
<sequential>
<sleep seconds="5"/>
<antcall target="nbdebug"/>
</sequential>
</parallel>
</target>
<target if="netbeans.home" description="Start NetBeans debugger" name="nbdebug">
<nb-kjava-debug period="2000" timeout="30000" name="${app.codename}" address="${jpda.port}">
<bootclasspath>
<path path="${platform.bootclasspath}"/>
</bootclasspath>
<classpath>
<path path="${dist.dir}/${dist.jar}"/>
</classpath>
<sourcepath>
<path path="${src.dir}"/>
<path path="${libs.src.path}"/>
</sourcepath>
</nb-kjava-debug>
</target>
<target depends="init,preprocess" name="javadoc">
<mkdir dir="${dist.javadoc.dir}"/>
<javadoc private="${javadoc.private}" windowtitle="${javadoc.windowtitle}" version="${javadoc.version}" author="${javadoc.author}" splitindex="${javadoc.splitindex}" noindex="${javadoc.noindex}" nonavbar="${javadoc.nonavbar}" use="${javadoc.use}" notree="${javadoc.notree}" bootclasspath="${platform.bootclasspath}" destdir="${dist.javadoc.dir}" source="${javac.source}">
<classpath>
<path path="${libs.classpath}"/>
</classpath>
<sourcepath>
<pathelement location="${preprocessed.dir}"/>
</sourcepath>
<fileset dir="${preprocessed.dir}"/>
</javadoc>
<antcall target="browse-javadoc"/>
</target>
<target unless="no.javadoc.preview" if="netbeans.home" name="browse-javadoc">
<nbbrowse file="${dist.javadoc.dir}/index.html"/>
</target>
<target name="pre-clean"/>
<target description="Clean build products." if="no.clean.before.build" depends="init,conditional-clean" name="clean">
<antcall inheritrefs="true" inheritall="true" target="do-clean"/>
</target>
<target depends="pre-clean" name="do-clean">
<delete dir="${preprocessed.dir}"/>
<delete dir="${build.classes.dir}"/>
<delete file="${obfuscator.srcjar}"/>
<delete file="${obfuscator.destjar}"/>
<delete dir="${obfuscated.classes.dir}"/>
<delete dir="${preverify.classes.dir}"/>
<delete file="${build.dir}/manifest.mf"/>
<delete file="${dist.dir}/${dist.jar}"/>
<delete file="${dist.dir}/${dist.jad}"/>
<delete dir="${dist.javadoc.dir}"/>
<antcall inheritrefs="true" inheritall="true" target="post-clean"/>
</target>
<target name="post-clean"/>
<target name="pre-deploy"/>
<target if="deployment.do.override.jarurl" depends="init,jar,pre-deploy" name="override-jad">
<property value="${dist.jar}" name="deployment.jarurl"/>
<nb-jad aliaspassword="${sign.alias.password}" alias="${sign.alias}" keystorepassword="${sign.keystore.password}" keystore="${sign.keystore}" sign="${sign.enabled}" url="${deployment.jarurl}" jarfile="${dist.dir}/${dist.jar}" jadfile="${dist.dir}/${dist.jad}"/>
</target>
<target unless="skip.deployment" if="deployment.method" depends="init,jar,override-jad,pre-deploy" name="deploy">
<fail unless="deployment.scriptfile">Property deployment.${deployment.method}.scriptfile not set. The property should point to an Ant script providing ${deployment.method} deployment.</fail>
<ant inheritrefs="true" inheritall="true" antfile="${deployment.scriptfile}">
<property location="${dist.dir}/${dist.jad}" name="deployment.jad"/>
<property location="${dist.dir}/${dist.jar}" name="deployment.jar"/>
</ant>
<propertyfile file="nbproject/private/private.properties">
<entry pattern="000000" default="2" operation="+" type="int" key="deployment.counter"/>
<entry value="${deployment.counter}" key="deployment.number"/>
</propertyfile>
<replaceregexp replace="deployment.number=\2\3.\5\6.\8\9" match="^deployment.number=[0-9]*(0|([1-9]))([0-9])(0|([1-9]))([0-9])(0|([1-9]))([0-9])$" file="nbproject/private/private.properties" byline="true"/>
<antcall inheritrefs="true" inheritall="true" target="post-deploy"/>
</target>
<target name="post-deploy"/>
<target name="for-all-configs">
<antcall inheritrefs="false" inheritall="false" target="${target.to.call}">
<param value="" name="config.active"/>
</antcall>
</target>
<target name="jar-all">
<antcall target="for-all-configs">
<param value="jar" name="target.to.call"/>
</antcall>
</target>
<target name="javadoc-all">
<antcall target="for-all-configs">
<param value="javadoc" name="target.to.call"/>
</antcall>
</target>
<target name="deploy-all">
<antcall target="for-all-configs">
<param value="deploy" name="target.to.call"/>
</antcall>
</target>
<target name="rebuild-all">
<antcall target="for-all-configs">
<param value="rebuild" name="target.to.call"/>
</antcall>
</target>
<target depends="load-properties" name="clean-all">
<fail unless="build.root.dir">Property build.root.dir is not set. By default its value should be \"build\".</fail>
<fail unless="dist.root.dir">Property dist.root.dir is not set. By default its value should be \"dist\".</fail>
<delete dir="${build.root.dir}"/>
<delete dir="${dist.root.dir}"/>
<antcall target="for-all-configs">
<param value="clean" name="target.to.call"/>
</antcall>
</target>
</project>
I have pasted the content of that file, please do the needs....

How to know what are t code assigned to user with out execution

how to disable the authorisations to perticular t cde

Hi Ramesh
If you want no user wants to use a particuler T code, you can lock the tcode using SM01 (Lock transactions).If you want to know the T codes assigned to a user go to T code SUIM - > Roles---> BY user assignment -
> feed your user name & execute (F8). In the next menu on application tool bar you will find Transaction assignment tab click the tab that's it you will find list of t codes you are allowed to use in the client.For this you can also use S_BCE_68001419 directly insted.
Regrds...
S.Manu

How do I use the same profile for two users on the same computer

I use my laptop both at home and at work. And in each venue I use a different user log on. But I wish to have firefox use the same profile for each user log on. How can I get firefox to point to the same profile for each user?

Note that only one user (Firefox instance) can use a profile folder at the time, so if you would switch the Windows user to another account then you would first have to close Firefox.
* http://kb.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows
* http://kb.mozillazine.org/Shortcut_to_a_specific_profile
* http://kb.mozillazine.org/Using_multiple_profiles_-_Firefox
* http://kb.mozillazine.org/Bypassing_the_Profile_Manager

How to know the correct size of an image?

hello, a thing ive never got a satisfying anwer on:
how can i know the REAL image size of an image?
1.
image 1a: this is the size i see in the photoshop window
1b: (why by the way is there 2 sizes?)
2. image 2: the size i see in windows/my documents.
same image, big differenct (8mb <--> 49mb)
which one is correct?
image 1: size in photoshop window
image 2: size in windows/my documents

Don't feel bad; there are more "size" indications than you'd think you need, but they're all useful for some things. And there are some interrelationships.
Size indications you might find:
The size in "megabytes" of the image document in your computer's RAM (the first of the two numbers in your first image). This is helpful for getting an idea of how many resources in your computer the process of editing a particular document is taking. This number can grow to much larger than the second number, for example, if you have a lot of layers in your document that Photoshop has to maintain separately in RAM. This size number will be reflected in the ultimate file sizes on disk when you save master documents (e.g., PSD) in which you maintain all the layers and other information used by Photoshop.
The size in "megabytes" of a flattened TIFF on disk (the second of the two numbers you showed in your first image above). This was a quick defacto shorthand developed by early people doing film scanning that described how many bytes on disk a flattened, uncompressed 8 bits/channel TIFF file would take. It is always 3x the size of the image in megapixels, because it's the number of horizontal pixels multiplied by the number of vertical pixels multiplied by 3 colors per pixel (red, green, blue). This usage of "megabytes" is often confused with the size a file actually does take on RAM or on disk, but they can be very different depending on file formats.
The size on disk of the actual file you saved, as listed by Windows Explorer. Since you did NOT save the image as a flattened, uncompressed 8 bit TIFF file, but probably as a PSD or JPEG file, each of which embody data compression, the file actually saved on your disk ended up smaller than the projected TIFF file size. The amount of compression usually differs depending on the image content, so you might find this size varying. The file size on disk is what will be important to web publishers.
For what it's worth, I prefer to think primarily of the size of an image document in pixels (horizontal x vertical).
I always keep my mind on the pixel count while editing. Then, when I'm preparing to use the image for a specific purpose, I think in terms of output size.
Photoshop's Image - Image Size... dialog is where you set sizes. If you choose to resample, you change the pixel count. This can be appropriate for downsampling an image in preparation for web publishing, where you want the image to be a certain size on a screen. If you don't resample, you are changing metadata kept in the document that instructs Photoshop how large you want a print. The size of an image in pixels DOES affect the size on disk, and the File - Save process for some formats (e.g., JPEG) puts up a dialog to allow you to choose a compression quality level, which additionally affects the size on disk.
Hope this helps illuminate what you're seeing a little.
-Noel

How can I use custom sizes with the hp deskjet 3050a

Why can't I find a place to cusomize card stock sizes in my printer

The driver that is used for the Deskjet 3050a does not support custom sizes. It has a pre-set of choices and this is all the driver supports.
You may be able to use an alternate driver, such as the HP Deskjet 9800 driver, that supports using custom paper sizes. Check the thread located here for information on how to use an alternate driver.
Hope this helps.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
I am not an HP employee.

Wondering how to know free space before burning CD

So far I've found it tedious trying to determine how much space is free when creating a playlist to burn to CD (regardless of the type of CD). While I understand that iTunes needs to examine the blank CD to determine the amount of storage, I wish it would indicate what % is used and the amount of KB would be free.

Yes, I guess I should have said I was burning audio CD's so the info at the bottom of iTunes doesn't help me as much as I'd like. It would be better it iTunes displayed minutes (or at least make this configurable). Also, this display does not change if one unchecks one or more of the songs even though this does change what songs are burned to the CD. This really needs more refinement.
While I'm on the checkboxes, is there a way to quickly find unchecked songs and toggle the checkbox?

How to know last login in oracle database 9i

hi all,
I want to know the last login in oracle database 9i.
Can some one help me.
Thanks

Hi,
Do you have auditing enabled then you can get details else
Enable it and execute the below one - then login and logoff times will be recorded for users
audit connect;
- Pavan Kumar N
Oracle 9i/10g - OCP
http://oracleinternals.blogspot.com/

How to know print margins size

Hi. I'm developing a print management. I have a problem with impresion margins. I lknow my printer can print with a very little margin (less than one centimeter) but in java, every I print has one inch margins (left, right, upper and lower). How can I to know what are really the less possible margins for each printer from java classes?
Any idea? Thanks.

hi,
Related Link to get idea
http://www.wildcrest.com/Software/J2PrinterWorks/documentation/J2Printer.html
http://forum.java.sun.com/thread.jspa?threadID=5158017&messageID=9678283

How to know used space(size) of database or user?

Similar Messages

Maybe you are looking for