How to know what were line item dimensions

Dear SDN,
How to know what were made line item dimensions.
Thankyou.

Rahul,
Go to the edit mode of your info cube and then check out your dimensions, there if the line item dimension check box is checked then it means that, that particular dimension is a Line item dimension.
Regards,
Gattu

Similar Messages

What is line item dimension and cardinality in BI 7.0

Can u plz suggest me what is line item dimension and cardinality in BI 7.0..
Thanks in advance.
Venkat

Hi Babu
Line item: This means the dimension contains precisely one characteristic. This means that the system does not create a dimension table. Instead, the SID table of the characteristic takes on the role of dimension table. Removing the dimension table has the following advantages:
¡ When loading transaction data, no IDs are generated for the entries in the dimension table. This number range operation can compromise performance precisely in the case where a degenerated dimension is involved.
¡ A table- having a very large cardinality- is removed from the star schema. As a result, the SQL-based queries are simpler. In many cases, the database optimizer can choose better execution plans.
Nevertheless, it also has a disadvantage: A dimension marked as a line item cannot subsequently include additional characteristics. This is only possible with normal dimensions.
Note: In SAP BW 3.0, the term line item dimension from SAP BW 2.0 must a) have precisely one characteristic and b) this characteristic must have a high cardinality. Before, the term line item dimension was often only associated with a). Hence the inclusion of this property in the above. Be aware that a line item dimension has a different meaning now than in SAP BW2.0.
SAP recommends that you use ODS objects, where possible, instead of InfoCubes for line items.
Hope this helps.
Plz check these links:
SAP Help:
http://help.sap.com/saphelp_nw04s/helpdata/en/a7/d50f395fc8cb7fe10000000a11402f/frameset.htm
Thanks & Regards
Reward if helped
Edited by: Noor Ahmed khan on Aug 5, 2008 2:36 PM

How to distinguish what GR line item has been parked invoice document by MIR7

Hi Experts,
I use work flow to release MM invoice parked by MIR7. But I get trouble with PO with many GR line items (example: PO shipment cost, PO stationery ...) where we need to match consecutive many invoices from one PO. Normally, when matching invoice by MIRO, amount an quanlity will be minused, we can continue to match invoice by exist line items. But now, when we parked first invoice to one line item (invoice not be released), amount and quanlity also display old value in second invoice for this line item, user cannot distinguish what line item has been mached invoice and waiting released, this is difficult to working. Please give me solution to distinguish what line item has been parked invoice in t-code MIR7?
Thanks

I think what you describe is standar system behaviour. You nee to re-think how you use Invoice Parking workflow - it is meant to manage incomplete documents, not for invoice release. You need to first post invoice doucument, only than open invoice qunatities will be updated and depending on tollerance limits and other setting release invoice for payment.

Table for line item dimensions

Hello SDN,
Any table gives info about what all line item dimensions are used in Cubes.
Goodday.

hi,
there is no table which contains info. about what are the line item dimensuins in a cube.
use LISTSCHEMA t-code to know the tables in a cube.
or got SE11, give Dim table name ie /BIC/D<cube name><dim no>
serach the keyfield.
or check directly in infocube edit.

BW : Line Item Dimension

Hii All,
Can you plz explain what is Line Item Dimensions...with examples.I am confused.
Plz help.
Thanks & Regards,
Madhavi S Bichakal

Hi
Line Item and High Cardinality
Use
When compared to a fact table, dimensions ideally have a small cardinality. However, there is an exception to this rule. For example, there are InfoCubes in which a characteristic document is used, in which case almost every entry in the fact table is assigned to a different document. This means that the dimension (or the associated dimension table) has almost as many entries as the fact table itself. We refer here to a degenerated dimension. In BW 2.0, this was also known as a line item dimension, in which case the characteristic responsible for the high cardinality was seen as a line item. Generally, relational and multi-dimensional database systems have problems to efficiently process such dimensions. You can use the indicators line item and high cardinality to execute the following optimizations:
       1.      Line item: This means the dimension contains precisely one characteristic. This means that the system does not create a dimension table. Instead, the SID table of the characteristic takes on the role of dimension table. Removing the dimension table has the following advantages:
¡        When loading transaction data, no IDs are generated for the entries in the dimension table. This number range operation can compromise performance precisely in the case where a degenerated dimension is involved.
¡        A table- having a very large cardinality- is removed from the star schema. As a result, the SQL-based queries are simpler. In many cases, the database optimizer can choose better execution plans.
Nevertheless, it also has a disadvantage: A dimension marked as a line item cannot subsequently include additional characteristics. This is only possible with normal dimensions.
       2.      High cardinality: This means that the dimension is to have a large number of instances (that is, a high cardinality). This information is used to carry out optimizations on a physical level in depending on the database platform. Different index types are used than is normally the case. A general rule is that a dimension has a high cardinality when the number of dimension entries is at least 20% of the fact table entries. If you are unsure, do not select a dimension having high cardinality.
Note: In SAP BW 3.0, the term line item dimension from SAP BW 2.0 must a) have precisely one characteristic and b) this characteristic must have a high cardinality. Before, the term line item dimension was often only associated with a). Hence the inclusion of this property in the above. Be aware that a line item dimension has a different meaning now than in SAP BW2.0.

How can i decide candidates for line item dimension?

1Q): we have many infocubes out of all these infocubes, i have to decide which infocubes are the candidates for lineitem dimension? How to do it? Please tell me the technical specs how to do the analysis to find out the candidates for line item dimension?
2Q): if i have the small dimension can i combine all these dimension in to one dimension? what is the benefit of doing this? how to find out which dimensions are small?
Pizzaman i like to hear from you on this topic. Thanks to SDN Community. i appreciate your help. Again Thank you.

The process of figuring out what you might want to create as a line item dimension can vary a bit, it can depend a lot on your exisitng level of domain expertise (how well do you know the data in question). If you are familiar with the data, I would recommend you just take an initial guess at what you believe could be line item dimensions. If you are not familiar witht the data, you might want to examine the source more to understand the cardinality of different characteristics and identify any relationships between characteristics.
I really encourage people to just go ahead and model it and load some data and review, rather than agonizing over developing the theoretically perfect model on paper before they start. You learn a lot more that way.
Any of the SAP rules of thumb, are just that, general rules, not a pronouncement from God. There are always extenuating or unique circumstances that might warrant disregarding the rule, e.g. if the InfoCube will never become very large, maybe some of the concerns just are not worth your effort.
With every release of the Oracle (and the other DBs too)Oracle keeps getting better at data warehousing and star schemas. Oracle 10i is supposed to have made handling bitmap indices much more efficient, which is on of the factors influencing the decision to create a line item dimension.
There are other threads on SDN on line item dims that provide more technical detail and can help answer you first question
As far as 2Q - generally, it's better to have several small dimensions than one larger dimension. But having said that, combining a few very small dimensions into another slightly larger (but still small) dimension is a good idea. It keeps the number of table joins down which will improve query performance. You would do this with characterisitcs that have very few values, e.g. yes/no indicators.
e.g.
You have 8 characteristics that all of which have only two values. You put them in one dimension, and the max size of the dimension table is still only 2x2x2x2x2x2x2x2 or 256 rows. If you had these characteristics in other much larger dimensions, it's not hard to see it causing those dimensions to double, perhaps creating hundreds of thousands of dimension table rows to be created.
For more - read <a href="http://www.kimballgroup.com/html/designtipsPDF/DesignTips2003/KimballDT48DeClutter.pdf">Ralph Kimball Design Tip 48 - Junk Dimensions</a>

How Line Item Dimensions

Hi..
I found some dimensions need to be conveted into line items. but when checked with cube that dimension has more than 1 characteristics. In that case what i have to do..and how can i convert it into line items

Hi Rajini...
1. When you anticipate high growth in the dimension tables of an entity.
2. Usually you decide whether a char is to in a line item dimension or not.
3. SAP recommends to have ODS for line items rather than cube; cube should have summarised data.
Also, see this link:
http://help.sap.com/saphelp_nw70/helpdata/en/a7/d50f395fc8cb7fe10000000a11402f/frameset.htm
Using Line Item Dimension
remodeling :
http://help.sap.com/saphelp_nw70/helpdata/en/58/85e5414f070640e10000000a1550b0/content.htm
regards,
supriya

How to consider an object as Line Item Dimension?

Can I have the formula for Line Item Dimension? I know basic idea like If the LID is more than 20% of the fact table then we consider as LID but how can we say that the object having more than 20% than Fact table?

Hi sanjeev kumar--
I hope thru that program you will get the ratio between different dimesion tables and the facttable.
In doing so if the size of the dimesion table is too high then we have to trace out the offending charecteristic in that dimension and have to assign that char as a line item dimension.
Generally it can be created on single char infoobjects. After creating it directly links to the MD . i mean to say there won't be a dimension for this..
You can check this under the Tcde listschema .
Hope this Helps,
Regards,
Vishwa.

What is line item datas,how can u check line item in Infocube?

Hi friends,
what is line item datas,how can u check line item in Infocube?

hi konda,
line item data
i shall give u an example .
consider a super market bill,
the bill has 1.customer name 2. bill number 3. date of purchase
the above line will be header.
line item data are the items which u purchase.
item 1 pencil 2 rubber 3. sharpner 4. cryon 5. sketch pens
above are line item datas. for a particular set of header data u may have many line item datas.
reward points if helpful.
bye.

How many line item dimensions can a fact table have?

Hi,
How many line item dimensions can a fact table have? Is it tht Max of 16 dimensions(13+3) .Does the 16 dimensions include line items dimensions as well .
Pls reply.
Thanks
Praveen

It includes all dimensios, including line item dimensions.
If you have line item dimension, pl note you cant assign any other characteristic to that dimension.
Ravi Thothadri

InfoCube Design for Variable data - Use of Line Item Dimensions

I have an infoprovider based on billing conditions which we have extended the extractor structure for 2LIS13_VDKON and we now have a requirement to add Customer fields such as Customer Purchase Order Number and Contract Number. These fields are obviously highly variable. I have added to them to the reporting DSO and now need advice on what is the best way to add these types of fields as reportable dimensions to the infocube so as to not impact performance? I currently have 9 dimensions with multiple charachteristics and a time dimension. Should I just create a line item dimension for Purchase Order? Problem is I have 8 other line item dimensions to add which are customer specific reporting fields that we capture on the sales order and wish to report on. I know there is a limit of 16 dimensions and I am also concerned about performance.
Any advice is greatly appreciated
Lee Lewis

Hi,
To make sure that the infocube you have created should not have any performance issue: Please do the following
Go to RSRV > All elementary tests-> Database---> database information about infoprovider tables
Upon clicking on database information about infoprovider tables, on the right hand side, in the parameter enter your infocube name and execute and see the log: ( log will automatically popping up once you are done with execution )
There see the database infomation about infoprovider:
This log wil make you to understand how well you have designed your infocube and make sure that each (f ) table corresponding to each dimension will not exceed 20 % of the infocube size.
You create dimensions of infocubes in a such a way ( whether line item or normal dimension ) so that any of the dimensional F table will not exceed 20 % of the infocube size.
Actually this will give us the information of the size of the data of particular dimension and there by if any particular dimension is exceeding the 20 % of the infocube size, then you need to create line item dimension for the characteristics existing in that dimension .
After creating again, test it and see whether any of the dimension table exceeding 20% infocube size .
Repeat this process until you see all dim F tables less than 20 % of the info cube table size
This will negate any performance issues arise in reporting
Edited by: S Simran on Nov 6, 2009 10:11 AM

Line Item Dimension in a Infocube

Hi,
What is a Line Item Dimension in BI and
How can/based on What factors we can decide declare a Infoobject as a Line Item dimension in Cube
How to measure size of the fact table
Thanks

Hi,
For working out the largest fact tables:
transaction DB02 -> space statistics -> top n largest tables.
If this does not help, your DB administrator should be able to extract the information using SQL.
Also you can use tcode ST14 -> BW Evaluation: performance analysis of BW objects.
Rgds,
Colum

Line item dimension issue

Hi,
      I am on development system and want to know the fact and dimension % as I need to create line item dimesion.
One solution is executing program SAP_INFOCUBE_DESIGN.
      But if I want to use this same program in Production system, it will take a lot of time and will engage resources......
      Kindly suggest me as to how to find out which dimension should be made a line item dimension?
Thanks,
Sonu

Hi,
Use RSRV.
Execute RSTRV and here you have the option of single cubes.
This takes the ourput from the same tables where the SAP_INFOCUBE_DESIGNS takes.
All Elementary Tests -> Database -> Database Information about InfoProvider Tables.
Give your infocube name here and execute.
It gives you a good detailed output.
Thanks
Ajeet

Line Item Dimension and Navigational attribute

Hi Gurus,
Can somebody tell me how line item Dimensions and navigational attributes works technically?
What are the pros and cons for them?
Regards
Alex

Hi Alex,
You will use navigational attributes based on how you want to track and report history. Let me explain with an example.
Customer Bubba is assigned Sales Group XYZ in Jan 2007. In July the Sales Group on the Customer Master record is changed to ABC. Your are looking at the sales report.
1). If you want to see all the sales made to Customer Bubba at the time of reporting (current) then you will use navigational attributes You will create 0SALESGRP as the navigational attribute of 0CUSTOMER . Then all sales to the customer will show up under Sales Group ABC.
2). If you want to see all the sales made to the customer at the time the actual transaction occured then you will add Sales Group as a characteristic of the InfoCube. Then sales from Jan - June 2007 will show under Sales Group XYZ and from July - Present will show under Sales Group ABC.
Performance issue occurs because navigational attribute is stored outside of the dimension table of the cube and is stored in separate master data tables. So query has to perform additional table read. So essentially there are advantages and disadvantages of usng navigational attributes. It is business requirement that will drive the use of navigational attribute.
Hope this helps!!!. Please assign points.

Regarding line item dimension

Hi all,
what are the necessary prerequisities will u take regarding line item dimension.
for eg., for sd cubes we r using sales doc no., i.obj as a line item dimension? why can't the other i.obj?
plz explain me clearly?
Thanks & Regards,
V.Vijay.

HI,
Line Item and High Cardinality
When compared to a fact table, dimensions ideally have a small cardinality. However, there is an exception to this rule. For example, there are InfoCubes in which a characteristic document is used, in which case almost every entry in the fact table is assigned to a different document. This means that the dimension (or the associated dimension table) has almost as many entries as the fact table itself. We refer here to a degenerated dimension. In BW 2.0, this was also known as a line item dimension, in which case the characteristic responsible for the high cardinality was seen as a line item. Generally, relational and multi-dimensional database systems have problems to efficiently process such dimensions. You can use the indicators line item and high cardinality to execute the following optimizations:
Line Item Dimensions
Line item: This means the dimension contains precisely one characteristic. This means that the system does not create a dimension table. Instead, the SID table of the characteristic takes on the role of dimension table. Removing the dimension table has the following advantages:
¡ When loading transaction data, no IDs are generated for the entries in the dimension table. This number range operation can compromise performance precisely in the case where a degenerated dimension is involved.
¡ A table- having a very large cardinality- is removed from the star schema. As a result, the SQL-based queries are simpler. In many cases, the database optimizer can choose better execution plans.
Nevertheless, it also has a disadvantage: A dimension marked as a line item cannot subsequently include additional characteristics. This is only possible with normal dimensions.
High Cardinality
If your dim table size exceeds the 20% of your fact table then you can say it as high cardinality, for ex: your fact table contains 100 records and your customer dimension contains 25 records means this dim is with high cardinality. you can check with your client for the expected records for those dimensions or for the info objects which you define in one dimension. to know the sizes of the dimension tables and fact tables you can runa a program in SE37 SAP_INFOCUBE_DESIGNS, it displays all your info cubes fact and dimension tables with sizes, if any dimension exceeds the more than 10% to 20% it will be in RED.
It means that the dimension is to have a large number of instances (that is, a high cardinality). This information is used to carry out optimizations on a physical level in depending on the database platform. Different index types are used than is normally the case. A general rule is that a dimension has a high cardinality when the number of dimension entries is at least 20% of the fact table entries. If you are unsure, do not select a dimension having high cardinality.
http://help.sap.com/saphelp_nw04/helpdata/en/b2/fbb859c64611d295dd00a0c929b3c3/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/en/a7/d50f395fc8cb7fe10000000a11402f/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/5c/d14d3c306f090ae10000000a11405a/frameset.htm
Note: In SAP BW 3.0, the term line item dimension from SAP BW 2.0 must a) have precisely one characteristic and b) this characteristic must have a high cardinality. Before, the term line item dimension was often only associated with a). Hence the inclusion of this property in the above. Be aware that a line item dimension has a different meaning now than in SAP BW2.0.
SAP recommends that you use ODS objects, where possible, instead of InfoCubes for line items.
Tarak

How to know what were line item dimensions

Similar Messages

Maybe you are looking for