How to know when a function is running in TRFC mode

Hi,
I have an RFC function and i would like the program to behave differently when called as a TRFC.
The question is how to identify when it is being executed asynchronously rather than synchronously.
Did I miss something obvious?
Any suggestions?

Actually I think this is probably solved by calling FM TRFC_RECEIVER_INFO.

Similar Messages

How to know when invoke bytecode implements?

I've got a classfile - it has few invokeinterface bytecodes inside - their count is defined dynamically - when class is running.
And I've got a program, which runs this class.
The aim of this program - to gather statistics of invokeinterface calling frequency.
How to know when invokeinterface bytecode implements?
(In that moment I plan to update several digits)
Have You got an advise for me?
Thanks.

You must use the debugging interface, or get a code profiler. Do a search on all forums for profiler, you'll get tons of information.

How to know when I'm doing a createInsert?

how to know when I'm doing a createInsert, this to hide a button when you run this action, I am using a task flow.
my version of jdeveloper is 12c

hi,
So you are using the createInsert as a method call in task flow. That is your form/table will be come new rows and you want to disable some button.
Your task flow might be as below
      CreateInsert---->Page.
To do so
1.) Take properties of your method call and bind the Method property to a method in a bean (bean registered in the task flow with scope view or any higher scope)
2) Call the create insert operation programmatically in that method.
3) And in that method after the createinsert ,set a boolean variable in pageFlowScope.
4)Put this variable in the disable property or visible propery of the button you wabt to hide/diable.
eg:
    public void doCreateInserOperation(){
        try {
           // Programatically invoke CreateInsert
            DCBindingContainer bindings = (DCBindingContainer)getBindingContainer();
            bindings.getOperationBinding("CreateInsert").execute();
        //Set a variable in page Flow Scope
        AdfFacesContext.getCurrentInstance().getPageFlowScope().put("disableButton", true)
        } catch (Exception e) {
            e.printStackTrace();
    public BindingContainer getBindingContainer() {
        FacesContext facesContext = getFacesContext();
        Application app = facesContext.getApplication();
        ExpressionFactory elFactory = app.getExpressionFactory();
        ELContext elContext = facesContext.getELContext();
        ValueExpression valueExp = elFactory.createValueExpression(elContext, "#{bindings}", Object.class);
        return (BindingContainer)valueExp.getValue(elContext);
you can access this variable in EL expression as #{pageFlowScope.disableButton}. So when your page render it will be in CreateInsert mode and the button will be disabled/hidden.
I hope this will help you.
With regards,
Gijith.

HT2173 How to know when a hard drive has failed ?

How to know when a hard drive has failed ?

Machine doesn't boot. You experience strange crashes. Gets wrong results. Your harddrive is five or more years old. Time to consider repacing it.   You do have backup?
You may want to run these "standard" fixes if the problem persists.
1) Check the amount of free space on your harddrive. You should have a several gigs free.
2) You should run disk utility
     a) verify the disk
     b) update your permissions.
3) Try a safe boot.
    Shutdown your machine. Hold down the shift key. Poweron. Wait awhile Wait awhile while you harddrive
      is being checked.
    http://support.apple.com/kb/ht1455
4) You may want to run applejack to clean up your machine.
     http://applejack.sourceforge.net/
a lot more ways to fix your Mac.
http://www.thexlab.com/faqs/faqs.html
verify & repair your startup drive
To verify & repair you file system on the startup drive, you will need to run disk utility from you installation DVD.
This article will tell you how to get to disk utility. Once in a disk utility, you can go and attempt to recover the disk.
http://support.apple.com/kb/TS1417
To repair your startup drive, you will need to run disk utility from your startup DVD.
Mac OS X 10.4: About the utilities available on the Mac OS X 10.4 Install DVD
http://support.apple.com/kb/HT2055
How to run disk utility from your startup DVD.
Insert your startup DVD into your reader. Power down your machine. Hold down to the c key. Power on your machine. This will bootup your startup DVD.
This will bring you to a panel asking you for your language. Pick your language.
You you come to the Install Mac OS panel. Do not install.
Click on Utilities menu item. This will give you a pulldown list of utilities.
Click on the disk utility.
You are now in disk utility. Pick your disk. Click on repair it should be on the lower right of the panel.
Once the repair completes successfully, you should update your permissions.
Verify a disk
As an alternative, you can verify that the filesystem on the disk is correct. You will not be able to repair the file system.
I suggest that you use disk utility to verify that your startup disk is OK.
Macintosh-HD -> Applications -> Utilities -> Disk Utility
Start up disk utility. On the left pane view, you will see a list of all your disks.
Click on your startup disk.
Click on the First Aid Tab.
Click on verify.
Hopefully your disk will verify. If not, you have to boot from your installation DVD and run Disk Utility from there to attempt to repair your file-system.

I'm a Microsoft Outlook for Mac user, I need information of how to know when e-mail was readed and confirm receipt of e-mails sent. thank you! regards Mauricio

I'm a Microsoft Outlook for Mac user, I need information of how to know when e-mail was readed and confirm receipt of e-mails sent. thank you! regards Mauricio

Mail and Address book

How to DEBUG a function module running in background mode? Please help!

Hi Experts,
   I am calling a function module in my ABAP code in background module using the following syntax:
CALL FUNCTION 'YBBC2_CREATE_SNAPSHOT' IN BACKGROUND TASK
          TABLES
            itab_std_format_inv = itab_std_format_inv
            itab_snapshot_inv = itab_snapshot_inv.
        COMMIT WORK.
If I put the breakpoint in the CALL FUNCTION line and execute the program, the debugger does not take me to the valled function module. This may be because I am running the function module as background task.
I cannot comment this "IN BACKGROUND TASK" statement as well since i am debugging in Quality system where I don't have change access.
So how to DEBUG a function module running in background mode? Please help!
Thanks
Gopal

Hi,
You could try to use the following trick:
(1) Put an endless loop into the coding of your function module where you want to start debugging, e.g.
DATA:
    lx_exit_loop(1)     TYPE c.
lx_exit_loop = ' '.
DO.
    IF ( lx_exit_loop = 'X' ).
      EXIT.
    ENDIF.
ENDDO.
(2) Call your function module in background task
(3) Call transaction SM50 and search for the background process.
(3) Choose from menu Program/Mode -> Program -> Debugging
Now you the debugger should bring you right to your endless loop. Set lx_loop_exit = 'X' in the debugger and continue (F5 or F6).
<b>Reward points</b>
Regards

How to know when the PRICE AFTER DISCOUNT changed and get the value

Hi,
Everything I do to see if a value changed in the grid works except for PRICE AFTER DISCOUNT
which seems to be inaccessible.
Any idea how to know when exactly this value changed and do actions accordinly ?
Also I always get 0.00 if I try to get the value of it
This works to get in the condition of a vlaue changing but I always get 0.00 as the value of the column
if (pVal.ItemUID == "38" && pVal.ColUID == COL_DISCOUNT.ToString() && pVal.EventType == BoEventTypes.et_VALIDATE && pVal.ItemChanged == true && pVal.ActionSuccess == true)
    try
        SAPbouiCOM.Matrix Matrix = (SAPbouiCOM.Matrix)SBO_Application.Forms.ActiveForm.Items.Item("38").Specific;
        SAPbouiCOM.EditText Editor = (SAPbouiCOM.EditText)Matrix.Columns.Item(COL_DISCOUNT).Cells.Item(pVal.Row).Specific;
        SBO_Application.MessageBox("Discount changed for : " + Editor.Value + "...", 1, "Ok", "", "");
    catch (Exception ex)
        SBO_Application.MessageBox(ex.Message, 1, "Ok", "", "");
And this do not even get into the condition even tought I SEE the column PRICE AFTER DISCOUNT:
if (pVal.ItemUID == "38" && pVal.ColUID == COL_PRICEAFTERDISCOUNT.ToString() && pVal.EventType == BoEventTypes.et_VALIDATE && pVal.ItemChanged == true && pVal.ActionSuccess == true)
    try
        SAPbouiCOM.Matrix Matrix = (SAPbouiCOM.Matrix)SBO_Application.Forms.ActiveForm.Items.Item("38").Specific;
        SAPbouiCOM.EditText Editor = (SAPbouiCOM.EditText)Matrix.Columns.Item(COL_PRICEAFTERDISCOUNT).Cells.Item(pVal.Row).Specific;
        SBO_Application.MessageBox("Price after discount changed for : " + Editor.Value + "...", 1, "Ok", "", "");
     catch (Exception ex)
         SBO_Application.MessageBox(ex.Message, 1, "Ok", "", "");

just idea, maybe it will works
Create one udf in row level and set there FS based on changes on price after discount and fill value what is in price after discount. Then the validation make on this field instead of standard SAP field.

How i know when a EXECUTE_QUERY retrieved last record

Hi...
How i know when the EXECUTE QUERY retrieved the last record in a block ....?
Exist a trigger after trigger POST-QUERY?
Regards
Hector Gabriel Ulloa Ligarius
Santiago of Chile
http://es.groups.yahoo.com/group/desarrolloOracle/

Kevin, sorry
But the :system.last_record not change the value during the execution of EXECUTE_QUERY.
Only useful when the data was retrieved into blocks...not during..
Other mode?
Regards
Hector Gabriel Ulloa Ligarius
Santiago of Chile
http://es.groups.yahoo.com/group/desarrolloOracle/

How to know what applications are currently running !!

how to know what applications are currently running !!

if it is in linux use "ps(Process Status)" command to know what is running currently.... for more see this link
http://www.computerhope.com/unix/ups.htm

How to know when the JComboBox popup is about to show or hide?

Hi all,
In JDK 1.4, a new addPopupMenuListener() was added to the JComboBox component. I found out I have to use JDK 1.3, but I already wrote a lot of code around this particular capability. I am trying to figure out how to duplicate it in JDK 1.3. I need to know BEFORE and AFTER the popup is displayed. OR, is there a way with JDK 1.3 that as soon as they click the combo box, it fires an event. The thing is, as soon as they click it, I want to change the background color. When they are done selecting, I can use an ActionListener or ItemListener to find out what was selected and change the color again. My killer is trying to figure out how to know when they have selected the box. I tried adding MouseListener, PropertyChangeListener, AncestorListener. None are doing a thing when the JComboBox is first selected.
Any help would be much appreciated.
Thank you.

Hi all,
In JDK 1.4, a new addPopupMenuListener() was added to the JComboBox component. I found out I have to use JDK 1.3, but I already wrote a lot of code around this particular capability. I am trying to figure out how to duplicate it in JDK 1.3. I need to know BEFORE and AFTER the popup is displayed. OR, is there a way with JDK 1.3 that as soon as they click the combo box, it fires an event. The thing is, as soon as they click it, I want to change the background color. When they are done selecting, I can use an ActionListener or ItemListener to find out what was selected and change the color again. My killer is trying to figure out how to know when they have selected the box. I tried adding MouseListener, PropertyChangeListener, AncestorListener. None are doing a thing when the JComboBox is first selected.
Any help would be much appreciated.
Thank you.

How to know each field function in sap mm module ?

how to know each field function in sap mm module ?
i know by press f1 but any easy way that to brief explanation.

Dear Ramakrishna,
What you have mentioned is correct.
Press F1 to find out the meaning of that field and you can also refer this link to know more about MM
Module,
http://help.sap.com/saphelperp60_sp/helpdata/en/9c/df293581dc1f79e10000009b38f889/frameset.htm_
http://www.sap-img.com/
Regards
Mangalraj.S

How will I know when Flash Player will run with out crashing in Protected Mode?

Firefox 15.0.1 had to disable Flash Player Protection Mode to view flash videos. I want to know how I will know when to enable Protection Mode.

It is a case of try it after upgrades and see if it works.
There will probably be celebrations if and when it is fixed ;-)
I have not noticed any Firefox staff predicting imminent fixes.
(Which reminds me I need to try something, I remembered reading about a novel solution that I have not yet tried)

How to know the stage where a running report is? - in Reports 3.0

Hi!
Thanks for paying attention.
I have a problem with running the reports. When I call a report from the forms using the built-in, RUN_PRODUCT, the report is running. The problem is, some times, it may take few min and some times more than 10 min and some times, it stops responding. So, how do I know at what stage the report is in.
For ex, if the report is run in Reports Designer, it shows a screen with client and server activity. Can I get the same effect by using the RUN_PRODUCT built-in.
Please help me or suggest me with some solution
Thank you
regards
RHR PRASAD

Hello rhr_pras
this is quotation form Report 3.0 manual:
Description PRINTJOB specifies whether the Print Job dialog box should be displayed before running a report.
Syntax
[PRINTJOB]YES
Values
YES or NO
Default
YES
Usage Notes
n When a report is run as a spawned process (i.e., one executable, such as R30RUN, is called from within another executable, such as R30DES), the Print Job dialog box will not appear, regardless of PRINTJOB.
n When DESTYPE=MAIL, the Print Job dialog box will not appear, regardless of PRINTJOB.
Also look for other parameters in paramlist for Run_Product (maybe BATCH) and maybe report mode (SYNCHR/ASYNCHR)
Hope this helps

How to know when Windows support files are updated? (BC 4)

I have MacBook Pro Retina w/Lion (of course), installed Win 7 Pro 64-bit, using Boot Camp procedures and files that were issued June 14. My BootCamp Assistant says it's 4.0.4.
My question is: how do I know when the Windows Support files (drivers) are updated by Apple? I would have expected an update by now, but I just went into Boot Camp Assistant on Lion, re-downloaded the drivers, and I *think* they are all dated June 14th still. (looked in WindowsSupport folder which is where it said it downloaded them)
There doesn't seem to be a reasonable way to get notified if there are new drivers or not.
My expectation was that I could run *something* either on the Windows or OS X side, and it would *tell me* that drivers needed updating, or at least say "you are running version X".
It can't be that I have to re-download the drivers and check the dates on all the files every time I'm curious if there's updates available. Can it?
The files seem to be on some mysterious Apple server and the only thing I can do to that server is ask to download the support files. No query, no "is an update available", ... ???
It's not even clear to me that the Windows Support files have a version number.

When the next revsion of OS X you can run Boot Camp Assistant again, or of course once 10.8 though might want to just sit tight, you would likely see reports in forums and elsewhere.
Apple Software Update for Windows use to but no longer.
The easiest way to see device driver version, chipset and more is with AIDA64
http://www.aida64.com/product/aida64-extreme-edition/overview

How to know when an object is deleted?

Hi,
In Java, instances of classes are eliminate by garbage collector and programmers have no chance to do it.
I need to do something, when the instance of a class ends its cycle-life .
How do I know when an object is going to be deleted, in order to make some thing bounded to this event?
thank you
Regards
Angelo

Thank you for your help ...
Here some code (I hope that I didn't forget something important):
1. A class inside the JaveaBeans to manage events:
     * NavBean_EventsBroadcaster is a singleton class used in the JavaBean to manage (fire)
     * the events; and also to manage (add/remove) the listeners.
     * Events are raised when users push buttons with the purpose to change the display of
     * records (of the table) on the screen.
    public class NavBean_EventsBroadcaster implements Serializable {
        private transient Vector listeners;
        private static NavBean_EventsBroadcaster eventsBroadcaster_ForNavBeans = null;
         Method to get the instance of the singleton class
           static public NavBean_EventsBroadcaster getSingletonInstance() {
                if (eventsBroadcaster_ForNavBeans == null) {
                    eventsBroadcaster_ForNavBeans = new NavBean_EventsBroadcaster();
                return eventsBroadcaster_ForNavBeans;
            } // getSingletonInstance
        * fireTheEvent_X_navBean(): method that raise events
        public void fireTheEvent_X_navBean(
                Object source,
                NavigatorBean_eventsList_ENUM nbEvtENUM,
                ResultSet rst,
                int keyReg) {
            if (listeners != null && !listeners.isEmpty()) {
                // object is going to be created (it contains the infos about the event)
                NavBeanDB_EventDescriptor event_descr =
                        new NavBeanDB_EventDescriptor(
                        source, // dBbeanNavigator
                        nbEvtENUM,
                        rst,
                        keyReg);
                // copy of the lisener to use it for add or remove
                Vector targets;
                synchronized (this) {
                    targets = (Vector) listeners.clone();
                // proper event (select first, next, prev, last reg) is raised
                Enumeration enumerat = targets.elements();
                while (enumerat.hasMoreElements()) {
                    NavBeanDBListener_INTERFACE l =
                           (NavBeanDBListener_INTERFACE) enumerat.nextElement();
                    l.firedNavigationBeanEvents(event_descr);
                    System.out.println("Method fireTheEvent ----- key = " + priKeyOnTheScreen);
            } // if
    } // fireTheEvent()
         * Adds a listener to the listener list.
         * @param l The listener to add.
        synchronized public void addNavBeanAddListener(NavBeanDBListener_INTERFACE l) {
            if (listeners == null) {
                listeners = new Vector();
            listeners.addElement(l);
            System.out.println("E' stato registrato un nuovo ascoltatatore per navigationBar");
        } // addNavBeanAddListener()
     * Removes a listener from the listener list.
     * @param l The listener to remove.
    synchronized public void removeNavBeanRemoveListener(NavBeanDBListener_INTERFACE l) {
        if (listeners.contains(l)) {
            listeners.remove(l);
    } // removeNavBeanRemoveListener()
    } // class NavBean_EventsBroadcaster2. The used interface
      * This is the interface that specifies the contract between a NavBeans
      * source and listener classes.
      * @author Owner
     public interface NavBeanDBListener_INTERFACE extends EventListener {
         public void firedNavigationBeanEvents(NavBeanDB_EventDescriptor evt);
     } // interface NavDB_BeansListener_INTERFACE3. the class adapter
    public abstract class DbNavigatorBean_Adapter implements NavBeanDBListener_INTERFACE {
         NavigatorBean_eventsList_ENUM navigatorBean_eventsList_ENUM;
         public DbNavigatorBean_Adapter() { // costruttore
         } // costruttore
          * This class have to be implemented from listeners to get events.
          * @param evt
         // NavigatorBean_eventsList_ENUM {user_chang, sequential_first, sequential_prev, sequential_next, sequential_last}
         public void firedNavigationBeanEvents(NavBeanDB_EventDescriptor evt) {
             navigatorBean_eventsList_ENUM = evt.getEventType();
             switch (navigatorBean_eventsList_ENUM) {
                 case user_chang:
                     toDoWhen_user_changeRegistration(evt);
                     break;
                 case sequential_first:
                     toDoWhen_setted_firstRegistration(evt);
                     break;
                 case sequential_prev:
                     toDoWhen_setted_prevRegistration(evt);
                     break;
                 case sequential_next:
                     toDoWhen_setted_nextRegistration(evt);
                     break;
                 case sequential_last:
                     toDoWhen_setted_lastRegistration(evt);
                     break;
             } // witch case
         } // firedNavigationBeanEvents()
         abstract public void toDoWhen_user_changeRegistration(NavBeanDB_EventDescriptor evt); // { }
         abstract public void toDoWhen_setted_firstRegistration(NavBeanDB_EventDescriptor evt); // { }
         abstract public void toDoWhen_setted_nextRegistration(NavBeanDB_EventDescriptor evt); // { }
         abstract public void toDoWhen_setted_prevRegistration(NavBeanDB_EventDescriptor evt); // { }
         abstract public void toDoWhen_setted_lastRegistration(NavBeanDB_EventDescriptor evt); // { }
     } // class class DbNavigatorBean_Adapter_base4. the class used to describe the event
   Class used to dercribe the event that happened.
   public class NavBeanDB_EventDescriptor extends EventObject {
       private NavigatorBean_eventsList_ENUM navigationBean_events_ENUM;
       private int primaryKeyOfRegOnTheScreen;
       private ResultSet resultSet;
       private int totOfRegsRegistredOnTheTable;
        * Costructor: is used to describe the events
        * @param source
        * @param nbEvtENUM
        * @param rst
        * @param keyReg
       public NavBeanDB_EventDescriptor( // costruttore
               Object source,
               NavigatorBean_eventsList_ENUM nbEvtENUM,
               ResultSet rst,
               int keyReg) {
           super(source);
           this.navigationBean_events_ENUM = nbEvtENUM;
           this.resultSet = rst;
           this.primaryKeyOfRegOnTheScreen = keyReg;
           extractTotRegsInTheTable(rst);
   //        this.totOfRegsRegistredOnTheTable = rgsRegNmbr;
           System.out.println("Viene creata una istanza di event descriptor");
       }// costruttore
        * which possibe action caused the event,
        * was pushed the button (first, prev, next, last, user select...)
        * @return
       public NavigatorBean_eventsList_ENUM getEventType() {
           return navigationBean_events_ENUM;
       } // getEventType
        * primmary key of registration on the screen
        * @return
       public int getPrimaryKeyOfTheRegOnTheScreen() {
           return primaryKeyOfRegOnTheScreen;
       } // getKeyRegOnTheScreen
       * resultSet showed on the screen
       public ResultSet getTheFullRegistrationOnTheScreen() {
           return resultSet;
       } // getTheFullRegistrationOnTheScreen
       Number of registrations actually on the table.
       public int getTotRegsRegistredOnTheTable() {
           return this.totOfRegsRegistredOnTheTable;
       } // getRegsRegistredNmbr
        private classe that get data
       private void extractTotRegsInTheTable(ResultSet rst) {
           ResultSet localRst =rst;
           try {
               int curRow = localRst.getRow();
               localRst.last();
               this.totOfRegsRegistredOnTheTable = localRst.getRow();
               localRst.absolute(curRow);
           } catch (SQLException ex) {
               Logger.getLogger(NavBeanDB_EventDescriptor.class.getName()).log(Level.SEVERE, null, ex);
   } // class NavBeansEvent5. a possible use of the JavaBeans
   public class TableClients extends JFrame
       implements LinkTablesToDlgThatRandomizeSelections_INTERFACE {
   private NavigationBean navigationBean;
   public TableClients() {   // constructor
        navigationBean = new NavigationBean();
        navigationBean.initializeDBbeanNavigator(...);
        this.add(navigationBean);
        navigationBean.addActionNavigatorListener(new DbNavigatorBean_Adapter() {
                    @Override
                    public void toDoWhen_user_changeRegistration(NavBeanDB_EventDescriptor nbdbed) {
                        // do something
                    @Override
                    public void toDoWhen_setted_firstRegistration(NavBeanDB_EventDescriptor nbdbed) {
                            // do something
                    @Override
                    public void toDoWhen_setted_nextRegistration(NavBeanDB_EventDescriptor nbdbed) {
                            // do something
                    @Override
                    public void toDoWhen_setted_prevRegistration(NavBeanDB_EventDescriptor nbdbed) {
                            // do something
                    @Override
                    public void toDoWhen_setted_lastRegistration(NavBeanDB_EventDescriptor nbdbed) {
                            // do something
} // constructor
} // class TableClientsthis code works well...
But if I implement the javaBeans on more than one Dialogs (windows) and the user uses
this dialogs sequentially, then the JavaBean responds to the events always as the caller is the
first dialog that run...
If I delete all listener (on the dialog) when the dialog is close then I have not problems
still thank you
Regards
Angelo

How to know when a function is running in TRFC mode

Similar Messages

Maybe you are looking for