How to know where and when my account logged in by...

Recently my account was used by someone and sent out a misleading message, which cause a great trouble to me. I sensed the one was in purpose. Can I check where and when my account was used on that date? How? Please help !!! waiting for your reply...

hi dominic.
thanks for the help and the links.
there is something terribly lacking in mac UI with respect to this unless i am missing something. if i do a search in Spotlight i see results and even when i see the file i want to know something about i have to OPEN FINDER which shows a ton of results (including hundreds if not thousands of eml file that i have to call mac and probably pay to find out why they are still showing up when prefs in Spotlight say to not show them...)  and only then can i actively select the file and have it show a file path at the bottom of the finder window.
this is maddening. isn't there an option to show this information in Spotlight or to show this information WHEN THE FILE IS OPEN (apologies for the caps). i mean, if i have a file open, maybe i don't know /where/ it came from for some reason.
for instance, if i am in a hurry and i open the file directly from Spotlight i can edit it and save it but i still have no idea where it resides on my hard drive. similarly if i open a file directly from spotlight and DUPLICATE a file and i want to save it as Version 2 - i have to - - - - well i guess i have to run another search for the file i just opened and am working upon in order to just save the dang file to the same location the original is in?
i mean, the links are showing that i should open Get Info but i think i need to see the file in finder to run this command anyway since i have to right click on the file itself.
maybe i am missing something but can't MAC OS just show me the FILE PATH at the top of the document like it does in Finder and also show me the FILE PATH in Spotlight? seems like the current implementation is like a big game of hopscotch for no good reason except the information is not shown to the (power) user.
maybe i am missing a new feature in ML or in Mavericks or maybe i am using the wrong terms in the original title?
THANK YOU

Similar Messages

  • I just purchased a secondhand iPad in carboot and I didn't realised that the old account is still linked to the device now can't  activate my accnt.i don't know where  and how to contact the original owner.what should I do?is there any other option?

    I just purchased a second hand iPad in carboot.i didn't realised that the old accnt is still linked to the device,now I icant activate my account .I don't  know where and how to contact the original owner.what should I do activate my accnt?is there any other option?

    Apple cannot help you locate the original owner. If you have no way to contact him/her, and you purchased directly from the seller rather than through a site that offers buyer protection, then the iPad is useless to you and you have wasted your money. The iPad is quite probably stolen and you should turn it in to the police.
    This is why it's very risky and usually unwise to purchase out of a car boot from someone you don't know.
    Regards.

  • Hello , I need to find the serial number of my programs . Would anyone know where and how to do it? The programs are installed on PC Thank you

    Hello , I need to find the serial number of my programs .
    Would anyone know where and how to do it?
    The programs are installed on PC
    Thank you

    Find your serial number quickly

  • How do I purchase music - I have registered but dont know where and how to make a purchase

    How do I purchase music - I have registered but dont know where and how to make a purchase

    Open itunes.
    Go to the itunes store.
    Find whatever you like.
    Click "buy"

  • How do I delete and existing itunes account on my iphone and start a new account

    how do I delete and existing itunes account on a phone that i have transfered to and start a new one

    You can't. All you can do is stop using it. Anything you have purchased using the old Apple ID is permanently connected to it and cannot be updated or re-downloaded when using the new Apple ID.

  • How to know where my iphone5 bought ?

    How to know where my iphone5 bought?

    check where you phone came from here http://iphonefrom.com
    Unlocking can only be performed by the carrier it is locked to.  Contact that carrier and see if you qualify for unlocking and if they will do it for you

  • RT - PID Gains - where and when to use them

    The attached is example code for controlling a temperature chamber. The question is where and when to use PID Gains? This code looks as though the PID Gain is used for the variable/parameter temperature (i.e. the temperature is the controlled variable).
    So would there be just one PID Gain per controlled variable/parameter (temperature in this case) or would each device controlling temperature in the system get a PID Gain?
    In this example, the fan and lamp are controlling the temperature.
    Attachments:
    Exercise 8-1.zip ‏171 KB

    Russ_in_Louisville wrote:
    I came here for help as this is where NI pointed me in their failure. I did not come here to get my "mental model" attacked.
    Can you accept that your model of the system might be wrong, though? In this thread from a few weeks ago, multiple experienced users told you that what you had on your block diagram was an array, and yet you insisted - repeatedly - that what you had was a cluster. Your model was that the item on the block diagram was a cluster, leading to the question "how do I get an index display on it?" which made no sense, because the item was in fact an array. And, when you finally realized you were wrong, you couldn't even admit it or thank the people who pointed out your error - it just "turned out" that the constant wasn't what you thought it was. I am trying to tell you that you are making a similar error here by asking questions about the system that do not correspond to what the system actually does.
    "Parameter/variable" isn't clear. There is correct terminology. A PID controller has, as inputs, a process variable and a setpoint. The process variable is the parameter you want to control, such as temperature. The setpoint is the desired value of the process variable. Let's say you do have a temperature control system where there is both a heating system and a cooling system (again, not the situation in your sample code). The two systems could both be driven by PID and share the same setpoint and process variable. Some control options for this system:
    - a single PID controller with one set of gains, where a negative output drives the cooling system and a positive output drives the heater (or some variation on this), if both the heater and chiller have similar performance characteristics.
    - two PID controllers, each with a set of gains, one controlling the heating and one controlling the cooler.
    - a combination of these two: a single controller with gains that are selected based on the setpoint or process variable, which is known as gain scheduling. The advantage to a single controller is that you'd never have the two controllers fighting each other.
    You could also have a code that controls several similar processes (for examply, multiple identical temperature chambers). In that situation you could have a single set of PID gains but multiple controllers each with a different setpoint and process variable.
    So there's not a simple yes/no answer to when you need a separate set of PID gains or an additional PID controller. It depends on the characteristics and design goals of your system. Does that help?

  • I am having issues with 360 degree rotation, I have an iPhone 5 and ios 6.0.2. I have read alot about this issue online and I found out that my issue is software. I want to know if and when apple will fix this issue?

    I am having issues with 360 degree rotation, I have an iPhone 5 and ios 6.0.2. I have read alot about this issue online and I found out that my issue is software. I want to know if and when apple will fix this issue?

    I had the same experience with a new iPhone 5 that I bought  last week. Did not have a chance to measure battery life before the 6.0.2 upgrade installed but I set up my phone exactly like my 4S and immediately started running out of power after short periods. Went to Xmas get together with fully charged 5 and 4S. Heading home the iPhone 5 shut down for low battery and the 4S had 65% power. Both phones had two half phone calls on then and no data usage.
    That night I fully charged the iPhone 5 and, without lighting it up, put it on my night table. Next morning I picked it up and looked at battery indicator and I had 42% charge with NO activity!
    Tried it again next night and wound up with 37% charge. (Slept longer).
    Today I called the carrier and reactivated the 4S.  Took the 5 to Apple Store and they kindly gave me choice of new replacement phone or refund. I took the refund. Uniquely, the Apple Store said it was Verizon CDMA phones that were coming back.
    The are other strings on this with temporary solutions, but from my experience with 7 firmware changes on an HTC 4G phone the problem will continue because the solution will be hardware caused. We are in the days where RTM means Rush to Market - not Release To Manufacturing.
    I fear the only solution is to either wait for the next model (I did not notice a really major change in performance over the 4S in LTE heavy Seattle area) - or switch to another manufacturer.
    It might be useful for these forums to indicate if you have a GSM or CDMA phone to see which have more problems.
    Discouraged....

  • How to know  columns and table name  whose column size are modified

    Hi guys
    I want to know which all columns in the tables are modify
    i.e. list of columns and table name whose column size are modified
    Step1 :
    CREATE TABLE employees
    ( employee_number number(5) ,
    employee_name varchar2(50) ,
    department_id number(10)
    CREATE TABLE Supplier
    ( Supplier_number number(5) ,
    Supplier_name varchar2(50) ,
    CREATE TABLE customers
    ( customer_id number(10) not null,
    customer_name varchar2(50),
    address varchar2(50),
    city varchar2(50),
    state varchar2(25),
    zip_code varchar2(10),
    Step2 :
    Alter table employees
    MODIFY employee_number number(10)
    ALTER TABLE supplier
    MODIFY supplier_name varchar2(100)
    step3
    query to dispaly
    columnname table name
    employee_number employees
    supplier_name supplier
    How to know columns and table name whose column size are modified
    could you please provide query
    Thanks in Advance

    09:35:50 SQL> desc dba_objects
    Name                            Null?    Type
    OWNER                                  VARCHAR2(30)
    OBJECT_NAME                             VARCHAR2(128)
    SUBOBJECT_NAME                         VARCHAR2(30)
    OBJECT_ID                             NUMBER
    DATA_OBJECT_ID                         NUMBER
    OBJECT_TYPE                             VARCHAR2(19)
    CREATED                             DATE
    LAST_DDL_TIME                             DATE
    TIMESTAMP                             VARCHAR2(19)
    STATUS                              VARCHAR2(7)
    TEMPORARY                             VARCHAR2(1)
    GENERATED                             VARCHAR2(1)
    SECONDARY                             VARCHAR2(1)
    NAMESPACE                             NUMBER
    EDITION_NAME                             VARCHAR2(30)LAST_DDL_TIME can be utilized

  • Does anybody know if and when there will be a plug in for raw files from the Nikon D810? I have lightroom 4

    I am considering buying a Nikon D810 but I do not want to be waiting for ages for a plug in for it's RAW files on my Lightroom 4. Does anybody know if and when there will be a plug in? I presume the 8.5 plug in will not cover the cameras Raw file.

    There is no plug-in for Lightroom 4 that would ever give you support for the new camera. Lightroom does not use Camera Raw. Camera Raw is a plug-in for Photoshop and Photoshop Elements. If you want support for your camera in Lightroom you will need to upgrade to Lightroom 5, and then wait for the 5.6 update which should be available within next few weeks (unless Lightroom 6 is introduced). In the meantime you can use the DNG converter (version 8.6 RC) to create DNG copies of your raw images that you would be able to open in Lightroom 4.

  • HT1267 how to know where i buy my iphone

    how to know where i buy my iphone

    Look at the receipt, search your memory.
    If you paid with a credit/debit card, look at your statements.
    Are you really that dumb? or did you intend to ask a different question?

  • Can anyone tell me where and when SAP IS life sciences training is offered?

    Can anyone tell me where and when SAP IS life sciences training is offered?

    Dear Hari,
    Pls explore following URL;
    http://www.sap.com/services/education/catalog/industry/lifesciences.epx
    Bye and all the best,
    Muralidhara

  • How to find workcenter and production order change log

    Hi,
    I am new to PP function.
    Due to problem tracking, I want to know where to find the change logs for
    1.Work Center
    2.Production Order
    Many thanks!
    Steven

    Hello Steven,
    to view change log for production order:
    1. you can go to CO03 at the header functions choose GOTO --- CHANGE MANAGEMENT (here you can see if in the order there where Change process been done to the order)
    2. Also in CO03 at the header functions choose HEADER --- STATUS CHANGES (with this you can track the user, system status changes, the action done, date, time, user,transaction happen on the production order.
    to view change log for work center:
    1. go to CR03 choose EXTRAS --- ADMINISTRATIVE DATA (here you can track the date and who made the changes ans status of the work center)
    2. you can also check table CRHD which you can see detailed of the work center you wish to see.
    Thanks

  • Stopped mac protector scam download in process of scanning files.  Trashed application from download folder/application folder and system preferences' accounts log in items.  does anything else need to be purged? checked?

    stopped mac protector scam download in process of scanning files.  Trashed application from download folder/application folder and system preferences' accounts log in items.  does anything else need to be purged? checked?

    stopped mac protector scam download in process of scanning files.  Trashed application from download folder/application folder and system preferences' accounts log in items.  does anything else need to be purged? checked?

  • How to know where a GL account is used

    hello all
    as FI is not my speciality, can someone explain to me how can I know where a GL account is being used? meaning, we link GL accounts to material groups via valuation class, is there a way to know which valuation class is linked to a specific GL account?
    thanks
    Alisa

    Hi,
    Am suprised, how come you are not able to see the valuation class.
    In Table T030 (initial screen) the first (row)filed is COA and fifth & Sixth (row) is G/L code.
    If you key in these values and execute, the system will display you all relevant details and the sixth column is Valuation class feild.
    When i checked in my system the following were displayed and i am able to see the valuation class.
    Client, Chart of Accts, Transaction, Val.Grpg Code, Acct modif, Valuation Class, G/L Account , G/L Account.
    Do check again.
    Regards,
    Gerardo

Maybe you are looking for