How to know whether first time to excute a Tcode after logon

Now i need do a BDC (Tcode:ABUMN)
when i first excute the ABUMN after logon, the first dynpro is 300(need input a company code)
And after first run , when i excute ABUMN again, it will skip the company screen(300) automatically
How to judge it?

Hi,
As far as I can see, the transaction reads the company code an then saves this comp. code in a static variable.
Since you are using LSMW I see two solutions:
If you use LSMW interactively (e. g. during initial load), you have to start ABUMN manually once before starting your BDC.
Otherwise you have to call ABUMN once - only to enter the company code - and ignore erros (e. g. if DYNPRO 300 isn't shown), then start the "real" BDC.
Hope this helps (please reward me if it does).
Regards, Joerg

Similar Messages

HT201441 please help me try to contact the owner of this phone IMEI **** ICCID **** i got his phone now with me but i dont know how to contact them first time

please help me try to contact the owner of this phone IMEI **** ICCID **** i got his phone now with me but i dont know how to contact them first time i got it low battery contact me
I will explan more how i got this phone
Call me +**** Micky Thai
<Personal Information Edited By Host>

A long shot but you might try using the phone to send an email to the phone asking the owner to call their mobile phone. If the owner has a computer they may get the email and get in contact with you.
But Roger's suggerstion of turning it over to the police is the best bet.
OT

How to know whether balance carry forward has happened or not

How to know , whether balance carry forward has happened or not for a perticular GL account or for the company code as a whole?

If the account is a balance sheet account, you can merely look at the beginning balance for the same balance sheet account for the beginning of the next fiscal year FS10N. The beginning balance will equal the previous year's ending balance. Since this does not happen automatically, you will know that carry forward has not been done if a balance sheet account has no beginning balance in the following fiscal year.
If you are talking about For P&L GL accounts, you can check the acvitity in the retained earnings accounts to make sure that they have been updated for the P&L activity. You can identify the retained earnings account by looking at the master data for the account in the section "P&L statmt acct type" and pulling up the menu to see the actual retained earnings account number.
You can perform carry foward (GVTR) as many times as you want but normally once it has been ran, any postings to a previous fiscal year are automatically carried forward to the current year after that initial run.

How to know whether a file is opened or not ?

Hi all,
How to know whether a file is opened by its editor or not ? File may be any of the type.

There are platform-dependent commands that tell whether a file (or directory, port etc.) is used by which processes.
[oracle@izsak ~]$ fuser .
.:                    9299c
[oracle@izsak ~]$ ps -p 9299 -f
UID        PID PPID C STIME TTY          TIME CMD
oracle    9299 9298 0 Apr25 pts/0    00:00:00 -bash
[oracle@izsak ~]$ ls -l $fn
-rw-r----- 1 oracle oinstall 111215876 Apr 25 19:05 /opt/oracle/product/AS/10g/R2/opmn/logs/OC4J~ebank~default_island~1
[oracle@izsak ~]$ fuser $fn
/opt/oracle/product/AS/10g/R2/opmn/logs/OC4J~ebank~default_island~1: 3746 3747 3748 3749 3750 3751 3752 3753 3754 3755 3756 3758 3761 3762 3765 3767 3769 3770 3771 18638 21605 21743 21744 21745 22140 22143
[oracle@izsak ~]$ ps -p 3746 -f
UID        PID PPID C STIME TTY          TIME CMD
oracle    3746 26427 0 Apr23 ?        00:00:01 /opt/oracle/product/AS/10g/R2/jdk/bin/java -server -Djava.security.policy=/opt...

How to know whether my system is J2EE compliant or not?

How to know whether my system is J2EE compliant or not?
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\Documents and Settings\Administrator>java -version
java version "1.6.0_16"
Java(TM) SE Runtime Environment (build 1.6.0_16-b01)
Java HotSpot(TM) Client VM (build 14.2-b01, mixed mode, sharing)Is my box J2EE compliant?

Trust me - I've been developing on an XP box for years and Java 1.6 for a good amount of time. This has been using Tomcat, JBoss, and Glassfish (and I try hard to forget about Oracle OC4J). These are application servers that implement part (Tomcat) or all (the rest) of the J2EE specification.
Having said that, you'll want at least 2GB of RAM and a hundred or so megabytes of disk space. Less RAM will work but slowly. A reasonable processor (I'd say at least 1.5GHz or above) will speed development.

How to know whether my Windows Phone 8.1 App is Associated with the store or not?

How to know whether my Windows Phone 8.1 App is Associated with the store or not?
I have an Windows Phone 8 app already in the store , Now i upgraded it to 8.1 it got upgraded to Windows Phone Silverlight 8.1.
Now iam trying to use Single Sign on feature on this app but it is showing the error message like
the App is not Configured correctly i followed the process from Signing users in to OneDrive
please guide me how to do this?
Mohan Rajesh Komatlapalli

You should post to publish forum.

How to know whether the javascript is disabled or not while loading the jsp

Hi,
My query is like how to know whether the javascript is disabled or not while loading the Application main JSP in Mozilla browser.
I want some Java code or JavaScript code.

To the point, just let JS fire a specific HTTP request inside the same session.
This can be done in several ways. 1) Create a hidden <img> element and set the `src` attribute so that it will request a (fake) image from the server. The server just have to intercept on this specific request. 2) Fire an ajaxical request and let the server intercept on it. You can use a Filter for this which sets a token in the session scope to inform that the client has JS enabled.

How to know whether a method is thread-safe through the java-doc?

In some book, it says that SAXParserFactory.newSAXParser() is thread-safe,but in the java-doc,it doesn't say that.
newSAXParser
public abstract SAXParser newSAXParser()
throws ParserConfigurationException,
SAXExceptionCreates a new instance of a SAXParser using the currently configured factory parameters.
Returns:
A new instance of a SAXParser.
Throws:
ParserConfigurationException - if a parser cannot be created which satisfies the requested configuration.
SAXException - for SAX errors.
I want to know, how to know whether a method is thread-safe?

System.out is a PrintStream object. None of the methods there use the synchronized modifier, but if you look in the source code, you will find out it is thread-safe, because it will use synchronized blocks whenever it writes some text.
The source code is in the src.jar file which you can extract.
I didn't find any comments about that PrintStream is thread-safe in the API.

How to know whether the Content Type at Library level is Inheriting Parent Content type or not Using Powershell?

Hi,
How to know whether the Content Type at Library level is Inheriting Parent Content type or not using Powershell?
Is there any property for that? Or Do I need to compare the Content type Id's at Site collection level and Library level?
Any help would be greatly appreciated.
Thank you,
AA.

Hi Ashok,
For a content type, there is an attribute called Inherits, the value of this attribute determines whether the content type inherits fields from its parent content type when it is created.
If Inherits is TRUE, the child content type inherits all fields that are in the parent, including fields that users have added.
If Inherits is FALSE or absent and the parent content type is a built-in type, the child content type inherits only the fields that were in the parent content type when SharePoint Foundation was
installed. The child content type does not have any fields that users have added to the parent content type.
More information, please refer to the link:
https://msdn.microsoft.com/en-us/library/office/aa544268.aspx?f=255&MSPPError=-2147217396
Best Regards,
Wendy
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

How to know whether the current database is using a password file or not?

How to know whether the current database is using a password file or not?

The remote_password_file is the parameter that determines if you can use or not a password file. The values this parameter can have are NONE, SHARED, EXCLUSIVE. It is pretty obvious, if it is set to either SHARED or EXCLUSIVE the oracle instance has enabled the access through a password file for the SYSDBA and SYSOPER roles.
~ Madrid

How to know whether database(oracle) is up and running at OS level

how to know whether database(oracle) is up and running at OS level...!!!

depends on the O/S you are using, Unix or Windows? I would use Korn shell script to monitor the Oracle background process and scripts to check of Oracle is accepting connections.
This UNIX command will show the number of processes for your instance:
ps -ef|grep $ORACLE_SID|grep -v grep|grep -v ora_|wc u2013l
In Windows I would look into services.msc

How to know whether a connection leak occured in weblogic8.1

How to Know whether Conenction Leak has Occured or Not ??..Where does the WeblogicServer8.1 print the STACK TRACE if connection Leak has occured ? or does it maintain a LOG FILE , where any entries can be seen................

To turn on Debug flags add these to the startup scripts.
-Dweblogic.Debug=weblogic.JDBCConn="true",weblogic.JTAJDBC="true"
Essentially, you will need to edit the config.xml file (when the server is down) and add the proprty to the ConnectionPool definition:
http://e-docs.bea.com/wls/docs61/config_xml/mbeans.html
ConnLeakProfilingEnabled="true"
Thanks and regards,
Pazhanikanthan. P

How to know whether a vacation rule is set for a user

Hi,
How to know whether a vacation rule is set for a user or not in the BPM process. Can anyone help me in this.
Thanks,

In Linux a user has to have read permission on a file to even see that it exists. As a result, if a user (or a group to which they belong) doesn't have read access to the file File.exists() will return false. Windows which doesn't have as tightly controlled access to files will admit that a file exists whether it can be read or not.
PS.
This is proof that I should never answer a question off the top of my head when I haven't had my red bull yet. This is wrong. You will be able to see it if you have read and execute on the directory.
thumps self in head
Message was edited by:
puckstopper31

How to know whether my ipad is under warranty

How to know whether my ipad 2 is under warranty

It's an iPad 2 so I'm pretty sure it is still less than one year old but you can check for sure here.
https://selfsolve.apple.com/agreementWarrantyDynamic.do

How to know whether ipod touch is with ios 5 or ios 4

how to know whether ipod touch is with ios 5 or ios 4

What do you mean is there any difference between iOS 4 and 5? There are tons of differences. Too many to cover here.
I would definitely buy a 4G iPod Touch though as they will be the only generation that supports iOS 6 when it comes out this fall.
B-rock

How to know whether first time to excute a Tcode after logon

Similar Messages

Maybe you are looking for